Styrene–butadiene–styrene copolymer-compatibilized interfacial-modified graphene oxide with mechanical and electrical properties

2015 ◽  
Vol 30 (9) ◽  
pp. 1228-1241 ◽  
Author(s):  
Hengwei Wang ◽  
Zhe Wang ◽  
Xue Wang ◽  
Lun Wang ◽  
Yanhua Cai ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Electrical Properties ◽  
Photoelectron Spectroscopy ◽  
X Ray ◽  
Mechanical And Electrical Properties ◽  
Modified Graphene Oxide ◽  
Styrene Butadiene Styrene ◽  
Styrene Butadiene ◽  
Butadiene Styrene

This article deals with the investigation of electrical and mechanical properties of styrene–butadiene–styrene tri-block copolymer (SBS) nanocomposites containing SBS-grafted graphene oxide (SBS- g-GO) nanofillers dispersed in the SBS matrix through a solution processing method. In order to improve the compatibility of graphene oxide in SBS, graphene oxide was modified by maleic anhydride-grafted SBS to SBS- g-GO. The SBS- g-GO were characterized by X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, and thermogravimetric analysis. The results showed that the SBS molecules were homogeneously bonded onto the surface of the GO, leading to an improvement of the mechanical and electrical properties of SBS/SBS- g-GO composites due to the excellent interfacial adhesion and dispersion of SBS- g-GO in SBS.

scholarly journals Improvement of Dispersibility of Graphene Oxide by Surface Modification with Rare Earths

2022 ◽  
Author(s):  
Yong Li ◽  
Zhou Jiang ◽  
Haidong Yu ◽  
Xuebin Zhou ◽  
Peng Yi
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Rare Earth ◽  
Rare Earth Elements ◽  
Photoelectron Spectroscopy ◽  
Energy Dispersive Spectrometer ◽  
X Ray ◽  
Modified Graphene Oxide ◽  
Modified Graphene ◽  
The Rare Earth

Abstract Rare earth-modified graphene oxide (RE-M-GO) materials were successfully prepared by infiltration and heating modifier method. The morphology and phase structure of RE-M-GO were characterized by scanning electron microscopy(SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy dispersive spectrometer(EDS). The changes of the chemical structure were indicated by Fourier transform infrared (FTIR). X-ray photoelectron spectroscopy(XPS) was used to study the chemical state of the surface elements of graphene oxide which showed that the rare earth elements were added to the graphene oxide functional groups through the coordination reaction. Additionally, the findings concluded that the effect of modification by Ce is more obvious than La elements and the RE-M-GO materials prepared by the heating modifier method had better dispersibility than infiltration. With activating effect, the rare earth elements grafting to graphene oxide will contribute to its combination with other materials.

scholarly journals Magnetic Graphene-Based Sheets for Bacteria Capture and Destruction Using a High-Frequency Magnetic Field

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 674
Author(s):  
Andri Hardiansyah ◽  
Ming-Chien Yang ◽  
Hung-Liang Liao ◽  
Yu-Wei Cheng ◽  
Fredina Destyorini ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Electron Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
High Frequency ◽  
Potential Measurement ◽  
X Ray ◽  
Modified Graphene Oxide ◽  
Frequency Magnetic Field ◽  
High Frequency Magnetic Field

Magnetic reduced graphene oxide (MRGO) sheets were prepared by embedding Fe3O4 nanoparticles on polyvinylpyrrolidone (PVP) and poly(diallyldimethylammonium chloride) (PDDA)-modified graphene oxide (GO) sheets for bacteria capture and destruction under a high-frequency magnetic field (HFMF). The characteristics of MRGO sheets were evaluated systematically by transmission electron microscopy (TEM), scanning electron microscopy (SEM), zeta potential measurement, X-ray diffraction (XRD), vibrating sample magnetometry (VSM), and X-ray photoelectron spectroscopy (XPS). TEM observation revealed that magnetic nanoparticles (8–10 nm) were dispersed on MRGO sheets. VSM measurements confirmed the superparamagnetic characteristics of the MRGO sheets. Under HFMF exposure, the temperature of MRGO sheets increased from 25 to 42 °C. Furthermore, we investigated the capability of MRGO sheets to capture and destroy bacteria (Staphylococcus aureus). The results show that MRGO sheets could capture bacteria and kill them through an HFMF, showing a great potential in magnetic separation and antibacterial application.

Reduced Graphene Oxide Supported Molybdenum Oxide Hybrid Nanocomposites: High Performance Electrode Material for Supercapacitor and Photocatalytic Applications

2020 ◽  
Vol 20 (7) ◽  
pp. 4035-4046
Author(s):  
Rengasamy Dhanabal ◽  
Dhanasekaran Naveena ◽  
Sivan Velmathi ◽  
Arumugam Chandra Bose
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Hybrid Nanocomposites ◽  
X Ray ◽  
Supercapacitor Application ◽  
Quenching Effect ◽  
Reduced Graphene

Using a simple solution based synthesis route, hexagonal MoO3 (h-MoO3) nanorods on reduced graphene oxide (RGO) sheets were prepared. The structure and morphology of resulting RGO-MoO3 nanocomposite were characterized using X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). The optical property was studied using UV-Visible diffuse reflectance spectroscopy (UV-Vis DRS) and photoluminescence spectroscopy (PL). The RGO-MoO3 nanocomposites were used as an electrode for supercapacitor application and photocatalyst for photodegradation of methylene blue (MB) and rhodamine B (RhB) under visible light irradiation. We demonstrated that the RGO-MoO3 electrode is capable of delivering high specific capacitance of 134 F/g at current density of 1 A/g with outstanding cyclic stability for 2000 cycles. The RGOMoO3 photocatalyst degrades 95% of MB dye within 90 min, and a considerable recyclability up to 4 cycles was observed. The quenching effect of scavengers test confirms holes are main reactive species in the photocatalytic degradation of MB. Further, the charge transfer process between RGO and MoO3 was schematically demonstrated.

scholarly journals Reduced Graphene Oxide–Epoxy Grafted Poly(Styrene-Co-Acrylate) Composites for Corrosion Protection of Mild Steel

Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 666
Author(s):  
Xinchuan Fan ◽  
Yue Hu ◽  
Yijun Zhang ◽  
Jiachen Lu ◽  
Xiaofeng Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Corrosion Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Scanning Electron

Reduced graphene oxide–epoxy grafted poly(styrene-co-acrylate) composites (GESA) were prepared by anchoring different amount of epoxy modified poly(styrene-co-acrylate) (EPSA) onto reduced graphene oxide (rGO) sheets through π–π electrostatic attraction. The GESA composites were characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The anti-corrosion properties of rGO/EPSA composites were evaluated by electro-chemical impedance spectroscopy (EIS) in hydroxyl-polyacrylate coating, and the results revealed that the corrosion rate was decreased from 3.509 × 10−1 to 1.394 × 10−6 mm/a.

In Situ Fabrication of Nanoscale Graphene Oxide/Polyaniline Composite and its Electrochemical Properties

2010 ◽  
Vol 148-149 ◽  
pp. 1547-1550 ◽  
Author(s):  
Hua Lan Wang ◽  
Qing Li Hao ◽  
Xi Feng Xia ◽  
Zhi Jia Wang ◽  
Jiao Tian ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
In Situ Polymerization ◽  
Ammonium Persulfate ◽  
Polymerization Process ◽  
Electrochemical Test ◽  
X Ray ◽  
Transmission Electron

A graphene oxide/polyaniline composite was synthesized by an in situ polymerization process. This product was simply prepared in an ethylene glycol medium, using ammonium persulfate as oxidant in ice bath. The composite was characterized by field emission scanning electron microscopy, transmission electron microscopy, X-Ray photoelectron spectroscopy, Raman spectroscopy and electrochemical test. The composite material showed a good electrochemical performance.

Facile Synthesis of Modified MnO2/Reduced Graphene Oxide Nanocomposites and their Application in Supercapacitors

NANO ◽  
2020 ◽  
Vol 15 (08) ◽  
pp. 2050099
Author(s):  
Lijun Chen ◽  
Hongfeng Yin ◽  
Yuchao Zhang ◽  
Huidong Xie
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Specific Capacitance ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Electrode Materials ◽  
Normal Pressure ◽  
X Ray ◽  
Assembly Method ◽  
Reduced Graphene

Herein, KH-550 was used as surface modifier to prepare modified MnO2/reduced graphene oxide (M-MnO2/rGO) composite electrode materials by utilizing electrostatic interaction at low temperature and normal pressure. X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy were adopted to characterize the material’s phase, morphology, and valence state of elements. The electrochemical properties of the material were measured using a three-electrode system. The results indicate a decrease in the size of the modified MnO2 particles, and that they were uniformly distributed on the rGO sheets. The M-MnO2/rGO composite attained a specific capacitance of 326[Formula: see text]F[Formula: see text]g[Formula: see text] in a solution of 1[Formula: see text]mol[Formula: see text]L[Formula: see text] Na2SO4 at a current density of 0.5[Formula: see text]A[Formula: see text]g[Formula: see text]. The specific capacitance of the material was 92.4% after 1000 cycles. The electrostatic self-assembly method effectively solved the problem of reducing the cycling stability while improving the specific capacitance of the composite materials, and further improved the possibility of applying MnO2/rGO in the field of supercapacitors.

scholarly journals MoSe2-GO/rGO Composite Catalyst for Hydrogen Evolution Reaction

Polymers ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1309 ◽  
Author(s):  
Wenwu Guo ◽  
Quyet Le ◽  
Amirhossein Hasani ◽  
Tae Lee ◽  
Ho Jang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Hydrogen Evolution ◽  
Hydrogen Evolution Reaction ◽  
Photoelectron Spectroscopy ◽  
Transition Metal Dichalcogenides ◽  
Catalytic Performance ◽  
Composite Catalyst ◽  
X Ray ◽  
Molybdenum Selenide

There has been considerable research to engineer composites of transition metal dichalcogenides with other materials to improve their catalytic performance. In this work, we present a modified solution-processed method for the formation of molybdenum selenide (MoSe2) nanosheets and a facile method of structuring composites with graphene oxide (GO) or reduced graphene oxide (rGO) at different ratios to prevent aggregation of the MoSe2 nanosheets and hence improve their electrocatalytic hydrogen evolution reaction performance. The prepared GO, rGO, and MoSe2 nanosheets were characterized by X-ray powder diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. The electrocatalytic performance results showed that the pure MoSe2 nanosheets exhibited a somewhat high Tafel slope of 80 mV/dec, whereas the MoSe2-GO and MoSe2-rGO composites showed lower Tafel slopes of 57 and 67 mV/dec at ratios of 6:4 and 4:6, respectively. We attribute the improved catalytic effects to the better contact and faster carrier transfer between the edge of MoSe2 and the electrode due to the addition of GO or rGO.

scholarly journals Citrus Extract Modified Graphene Oxide as a Green and Heterogeneous Organocatalyst for the Synthesis of Imidazole Derivatives

2020 ◽  
Vol 32 (9) ◽  
pp. 2375-2380
Author(s):  
S. ARUNKUMAR ◽  
S. CHIDAMBARA VINAYAGAM ◽  
S. LAKSHMANAN ◽  
S. ARUL ANTONY
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Catalytic Activity ◽  
Room Temperature ◽  
Fourier Transforms ◽  
X Ray ◽  
Imidazole Derivatives ◽  
Modified Graphene Oxide ◽  
Citrus Extract ◽  
Microscopy Images

A naturally benign convention was created with a surface change of graphene oxide by citrus extract as catalyst was prepared by a straight-forward chemical modification method. The prepared catalyst′s catalytic activity was examined by the synthesis of imidazole derivatives at room temperature. It shows a strong acidic catalytic and sustainable organocatalyst. The prepared catalyst was characterized using different analytical procedures like elemental analysis, Fourier transforms infrared spectroscopy (FT-IR), powder X-ray diffraction (PXRD), energy-dispersive X-ray analysis (EDS), scanning electron microscopy images (SEM) and transmission electron microscopy images (TEM) analysis. The catalytic activity shows high activity and can be reused without significant loss of catalytic activity after five times. A present catalyst works easily under room temperature.

Chemistry, microstructure, and electrical properties at interfaces between thin films of cobalt and alpha (6H) silicon carbide (0001)

1995 ◽  
Vol 10 (1) ◽  
pp. 26-33 ◽  
Author(s):  
L.M. Porter ◽  
R.F. Davis ◽  
J.S. Bow ◽  
M.J. Kim ◽  
R.W. Carpenter
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Electron Beam ◽  
Electrical Properties ◽  
Photoelectron Spectroscopy ◽  
Electron Beam Evaporation ◽  
Leakage Currents ◽  
X Ray ◽  
Transmission Electron

Thin films (4–1000 Å) of Co were deposited onto n-type 6H-SiC(0001) wafers by UHV electron beam evaporation. The chemistry, microstructure, and electrical properties were determined using x-ray photoelectron spectroscopy, high resolution transmission electron microscopy, and I-V and C-V measurements, respectively. The as-deposited contacts exhibited excellent rectifying behavior with low ideality factors and leakage currents of n < 1.06 and 2.0 × 10−8 A/cm2 at −10 V, respectively. During annealing at 1000 °C for 2 min, significant reaction occurred resulting in the formation of CoSi and graphite. These annealed contacts exhibited ohmic-like character, which is believed to be due to defects created in the interface region.

Sign in / Sign up

Export Citation Format

Share Document