Structure and properties of composites based on polyphenylene sulfide reinforced with Al-Cu-Fe quasicrystalline particles

2017 ◽  
Vol 31 (7) ◽  
pp. 882-895 ◽  
Author(s):  
DI Chukov ◽  
AA Stepashkin ◽  
VV Tcherdyntsev ◽  
LK Olifirov ◽  
SD Kaloshkin
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Polymer Matrix ◽  
Resistance Index ◽  
Softening Temperature ◽  
Polyphenylene Sulfide ◽  
Mechanical And Thermal Properties ◽  
Structure And Properties ◽  
Properties Of Composites

Structural, mechanical, and thermal properties of polyphenylene sulfide (PPS) filled with Al-Cu-Fe quasicrystals particles were studied. It was shown that the introducing of quasicrystalline fillers into the polymer matrix results in the increase in Young’s modulus, hardness, and toughness of the polymer. Quasicrystalline fillers can improve thermal properties of PPS, including heat resistance index, Vicat softening temperature, thermal diffusivity, and thermal conductivity.

scholarly journals Impact of SiC on The Mechanical and Thermal Properties of Banana Fiber Reinforced Epoxy Composites

2021 ◽  
Vol 9 (9) ◽  
pp. 1066-1071
Author(s):  
Mayank Agarwal
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Impact Strength ◽  
Fiber Composite ◽  
Mechanical And Thermal Properties ◽  
Fiber Reinforced ◽  
Banana Fiber ◽  
Banana Fibers

Abstract: This work investigates the mechanical properties (Tensile Strength & Impact Strength) and thermal properties (Thermal conductivity & diffusivity) of a natural fiber composite that includes banana fiber as reinforcement in epoxy (LY 556) matrix as the base material with the addition of silicon carbide particles by 5% and 10% by weight. This Banana Fiber Reinforced Epoxy Composite (BFREC) prepared by hand lay-up technique. After curing for a sufficient period, samples taken out and tested. The results suggest that on increasing SiC wt% in the matrix, there is enhancement of its tensile strength, impact strength, and thermal conductivity. Bulk density also increases while thermal diffusivity decreases. Due to low density as compared to metals, improved tensile and impact strength and low elongation at break of banana fibers, BFREC composite with SiC have very good potential use in the various sectors. Keywords: Banana fiber, SiC, hand layup technique, mechanical characterization, thermal conductivity, thermal diffusivity

Thermal Characterization of Carbon-Carbon Composites

2011 ◽  
Author(s):  
Messiha Saad ◽  
Darryl Baker ◽  
Rhys Reaves
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Specific Heat ◽  
Critical Role ◽  
Carbon Composite ◽  
Flash Method ◽  
Carbon Composites ◽  
Energy Storage Devices ◽  
Graphitized Carbon

Thermal properties of materials such as specific heat, thermal diffusivity, and thermal conductivity are very important in the engineering design process and analysis of aerospace vehicles as well as space systems. These properties are also important in power generation, transportation, and energy storage devices including fuel cells and solar cells. Thermal conductivity plays a critical role in the performance of materials in high temperature applications. Thermal conductivity is the property that determines the working temperature levels of the material, and it is an important parameter in problems involving heat transfer and thermal structures. The objective of this research is to develop thermal properties data base for carbon-carbon and graphitized carbon-carbon composite materials. The carbon-carbon composites tested were produced by the Resin Transfer Molding (RTM) process using T300 2-D carbon fabric and Primaset PT-30 cyanate ester. The graphitized carbon-carbon composite was heat treated to 2500°C. The flash method was used to measure the thermal diffusivity of the materials; this method is based on America Society for Testing and Materials, ASTM E1461 standard. In addition, the differential scanning calorimeter was used in accordance with the ASTM E1269 standard to determine the specific heat. The thermal conductivity was determined using the measured values of their thermal diffusivity, specific heat, and the density of the materials.

scholarly journals Reaction Mechanism and Mechanical Property Improvement of Poly(Lactic Acid) Reactive Blending with Epoxy Resin

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2429
Author(s):  
Krittameth Kiatiporntipthak ◽  
Nanthicha Thajai ◽  
Thidarat Kanthiya ◽  
Pornchai Rachtanapun ◽  
Noppol Leksawasdi ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Epoxy Resin ◽  
Softening Temperature ◽  
Poly Lactic Acid ◽  
Mechanical And Thermal Properties ◽  
Nanoparticle Dispersion ◽  
Reactive Blending ◽  
Partial Miscibility ◽  
Epoxy Blends ◽  
Epoxy Content

Polylactic acid (PLA) was melt-blended with epoxy resin to study the effects of the reaction on the mechanical and thermal properties of the PLA. The addition of 0.5% (wt/wt) epoxy to PLA increased the maximum tensile strength of PLA (57.5 MPa) to 67 MPa, whereas the 20% epoxy improved the elongation at break to 12%, due to crosslinking caused by the epoxy reaction. The morphology of the PLA/epoxy blends showed epoxy nanoparticle dispersion in the PLA matrix that presented a smooth fracture surface with a high epoxy content. The glass transition temperature of PLA decreased with an increasing epoxy content owing to the partial miscibility between PLA and the epoxy resin. The Vicat softening temperature of the PLA was 59 °C and increased to 64.6 °C for 0.5% epoxy. NMR confirmed the reaction between the -COOH groups of PLA and the epoxy groups of the epoxy resin. This reaction, and partial miscibility of the PLA/epoxy blend, improved the interfacial crosslinking, morphology, thermal properties, and mechanical properties of the blends.

Mechanical and Thermal Properties of Magnesia Binder Based on Natural and Technogenic Raw Materials

2021 ◽  
Vol 320 ◽  
pp. 181-185
Author(s):  
Elvija Namsone ◽  
Genadijs Sahmenko ◽  
Irina Shvetsova ◽  
Aleksandrs Korjakins
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Raw Materials ◽  
High Strength ◽  
Strength Properties ◽  
Waste Materials ◽  
Mechanical And Thermal Properties ◽  
Experimental Part ◽  
Technogenic Raw Materials ◽  
Caustic Magnesia

Because of low calcination temperature, magnesia binders are attributed as low-CO2 emission materials that can benefit the environment by reducing the energy consumption of building sector. Portland cement in different areas of construction can be replaced by magnesia binder which do not require autoclave treatment for hardening, it has low thermal conductivity and high strength properties. Magnesium-based materials are characterized by decorativeness and ecological compatibility.The experimental part of this research is based on the preparation of magnesia binders by adding raw materials and calcinated products and caustic magnesia. The aim of this study was to obtain low-CO2 emission and eco-friendly material using local dolomite waste materials, comparing physical, mechanical, thermal properties of magnesium binders.

Experimental Study on Thermal Properties of Hollow Sphere Structures

2021 ◽  
Vol 407 ◽  
pp. 185-191
Author(s):  
Josef Tomas ◽  
Andreas Öchsner ◽  
Markus Merkel
Keyword(s):  
Thermal Conductivity ◽  
Experimental Study ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Specific Heat ◽  
Hollow Sphere ◽  
Plane Source ◽  
Source Method ◽  
Transient Plane Source ◽  
Transient Plane Source Method

Experimental analyses are performed to determine thermal conductivity, thermal diffusivity and volumetric specific heat with transient plane source method on hollow sphere structures. Single-sided testing is used on different samples and different surfaces. Results dependency on the surface is observed.

scholarly journals Application of sonication and freezing as initial treatments before microwave-vacuum drying of cranberries

2019 ◽  
Vol 2 (22) ◽  
pp. 151-167 ◽  
Author(s):  
Izabela Staniszewska ◽  
Szymon Staszyński ◽  
Magdalena Zielińska
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Physical Properties ◽  
Color Change ◽  
Vacuum Drying ◽  
Drying Time ◽  
Dried Fruits ◽  
Microwave Vacuum Drying ◽  
Drying Kinetic

The aim of study was to determine the influence of sonication and freezing on the kinetic of the microwave-vacuum drying, energy consumption and physical properties of whole cranberries as well as evaluate the applicability of sonication instead of freezing in order to change their physical properties and the drying kinetic of whole cranberries. Microwave-vacuum drying of whole cranberries with/without initial treatments took from 12 ± 1 to 14.5 ± 0.5 minutes. All of treatments did not significantly shorten the drying time of cranberries. However, they increased SMER values even by 31%. Despite of cryogenic freezing, all of treatments significantly increased the values of Dew. Sonication combined with drying allowed to obtain dried berries characterized by the lowest cohesiveness (0.19±0.02), springiness (0.62±0.02) and chewiness (3.4±0.8 N), while cryogenic freezing combined with drying allowed to obtain dried fruits characterized by highest springiness (0.75±0.03) and low chewiness (3.3±0.5 N). The highest lightness (32.2±0.7), redness (32.6±0.8), and yellowness (11.1±0.7) were found for fruits subjected to initial convective freezing before drying. The efficiency of sonication in color change was comparable to cryogenic freezing and much lower than convective freezing. All of initial treatments increased such thermal properties of dried cranberries as thermal conductivity and thermal diffusivity.

scholarly journals Bio-based rigid polyurethane foam prepared from apricot stone shell-based polyol for thermal insulation application – Part 2: Morphological, mechanical, and thermal properties

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 6080-6094
Author(s):  
Muhammed Said Fidan ◽  
Murat Ertaş
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermogravimetric Analysis ◽  
Polyurethane Foam ◽  
Flame Retardants ◽  
Compressive Modulus ◽  
Cell Diameter ◽  
Mechanical And Thermal Properties ◽  
Rigid Polyurethane Foam

The procedure for the liquefaction of apricot stone shells was reported in Part 1. Part 2 of this work determines the morphological, mechanical, and thermal properties of the bio-based rigid polyurethane foam composites (RPUFc). In this study, the thermal conductivity, compressive strength, compressive modulus, thermogravimetric analysis, flammability tests (horizontal burning and limited oxygen index (LOI)) in the flame retardants), and scanning electron microscope (SEM) (cell diameter in the SEM) tests of the RPUFc were performed and compared with control samples. The results showed the thermal conductivity (0.0342 to 0.0362 mW/mK), compressive strength (10.5 to 14.9 kPa), compressive modulus (179.9 to 180.3 kPa), decomposition and residue in the thermogravimetric analysis (230 to 491 °C, 15.31 to 21.61%), UL-94 and LOI in the flame retardants (539.5 to 591.1 mm/min, 17.8 to 18.5%), and cell diameter in the SEM (50.6 to 347.5 μm) of RPUFc attained from liquefied biomass. The results were similar to those of foams obtained from industrial RPUFs, and demonstrated that bio-based RPUFc obtained from liquefied apricot stone shells could be used as a reinforcement filler in the preparation of RPUFs, specifically in construction and insulation materials. Moreover, liquefied apricot stone shell products have potential to be fabricated into rigid polyurethane foam composites.

Sign in / Sign up

Export Citation Format

Share Document