scholarly journals The response of the copepod Acartia tonsa to the hydrodynamic cues of small-scale, dissipative eddies in turbulence

2020 ◽  
pp. jeb.237297
Author(s):  
Dorsa Elmi ◽  
Donald R. Webster ◽  
David M. Fields
Keyword(s):  
Velocity Field ◽  
Behavioral Response ◽  
Swirling Flow ◽  
Three Dimensional ◽  
Acartia Tonsa ◽  
Small Scale ◽  
Swimming Velocity ◽  
Marine Copepod ◽  
Swimming Kinematics ◽  
Vortex Axis

This study quantifies the behavioral response of a marine copepod (Acartia tonsa) to individual, small-scale, dissipative vortices that are ubiquitous in turbulence. Vortex structures were created in the laboratory using a physical model of a Burgers vortex with characteristics corresponding to typical dissipative vortices that copepods are likely to encounter in the turbulent cascade. To examine the directional response of copepods, vortices were generated with the vortex axis aligned in either horizontal or vertical directions. Tomographic particle image velocimetry was used to measure the volumetric velocity field of the vortex. Three-dimensional copepod trajectories were digitally reconstructed and overlaid on the vortex flow field to quantify A. tonsa’s swimming kinematics relative to the velocity field and to provide insight to the copepod behavioral response to hydrodynamic cues. The data show significant changes in swimming kinematics and an increase in relative swimming velocity and hop frequency with increasing vortex strength. Furthermore, in moderate-to-strong vortices, A. tonsa moved at elevated speed in the same direction as the swirling flow and followed spiral trajectories around the vortex, which would retain the copepod within the feature and increase encounter rates with other similarly behaving Acartia. While changes in swimming kinematics depended on vortex intensity, orientation of the vortex axis showed minimal significant effect. Hop and escape jump densities were largest in the vortex core, which is spatially coincident with the peak in vorticity suggesting that vorticity is the hydrodynamic cue that evokes these behaviors.

scholarly journals Three-Dimensional Swirl Flow Velocity-Field Reconstruction Using a Neural Network With Radial Basis Functions

2001 ◽  
Vol 123 (4) ◽  
pp. 920-927 ◽  
Author(s):  
J. Pruvost ◽  
J. Legrand ◽  
P. Legentilhomme
Keyword(s):  
Neural Network ◽  
Velocity Field ◽  
Radial Basis Functions ◽  
Swirling Flow ◽  
Interpolation Method ◽  
Measurement Techniques ◽  
Three Dimensional ◽  
Basis Functions ◽  
Hydrodynamic Characteristics ◽  
Radial Basis

For many studies, knowledge of continuous evolution of hydrodynamic characteristics is useful but generally measurement techniques provide only discrete information. In the case of complex flows, usual numerical interpolating methods appear to be not adapted, as for the free decaying swirling flow presented in this study. The three-dimensional motion involved induces a spatial dependent velocity-field. Thus, the interpolating method has to be three-dimensional and to take into account possible flow nonlinearity, making common methods unsuitable. A different interpolation method is thus proposed, based on a neural network algorithm with Radial Basis Functions.

Three-dimensional structure and momentum transfer in a turbulent cylinder wake

1999 ◽  
Vol 394 ◽  
pp. 303-337 ◽  
Author(s):  
A. VERNET ◽  
G. A. KOPP ◽  
J. A. FERRÉ ◽  
FRANCESC GIRALT
Keyword(s):  
Velocity Field ◽  
Saddle Point ◽  
Three Dimensional ◽  
Symmetry Plane ◽  
Half Width ◽  
Small Scale ◽  
Spanwise Direction ◽  
Mean Flow ◽  
Mean Velocity ◽  
The Mean

Simultaneous velocity and temperature measurements were made with rakes of sensors that sliced a slightly heated turbulent wake in the spanwise direction, at different lateral positions 150 diameters downstream of the cylinder. A pattern recognition analysis of hotter-to-colder transitions was performed on temperature data measured at the mean velocity half-width. The velocity data from the different ‘slices’ was then conditionally averaged based on the identified temperature events. This procedure yielded the topology of the average three-dimensional large-scale structure which was visualized with iso-surfaces of negative values of the second eigenvector of [S2+Ω2]. The results indicate that the average structure of the velocity fluctuations (using a triple decomposition of the velocity field) is found to be a shear-aligned ring-shaped vortex. This vortex ring has strong outward lateral velocities in its symmetry plane which are like Grant's mixing jets. The mixing jet region extends outside the ring-like vortex and is bounded by two foci separated in the spanwise direction and an upstream saddle point. The two foci correspond to what has been previously identified in the literature as the double rollers.The ring vortex extracts energy from the mean flow by stretching in the mixing jet region just upstream of the ring boundary. The production of the small-scale (incoherent) turbulence by the coherent field and one-component energy dissipation rate occur just downstream of the saddle point within the mixing jet region. Incoherent turbulence energy is extracted from the mean flow just outside the mixing jet region, but within the core of the structure. These processes are highly three-dimensional with a spanwise extent equal to the mean velocity half-width.When a double decomposition is used, the coherent structure is found to be a tube-shaped vortex with a spanwise extent of about 2.5l0. The double roller motions are integral to this vortex in spite of its shape. Spatial averages of the coherent velocity field indicate that the mixing jet region causes a deficit of mean streamwise momentum, while the region outside the foci of the double rollers has a relatively small excess of streamwise momentum.

scholarly journals Transition to turbulence in an elliptic vortex

1996 ◽  
Vol 307 ◽  
pp. 43-62 ◽  
Author(s):  
T. S. Lundgren ◽  
N. N. Mansour
Keyword(s):  
Swirling Flow ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Periodic Wave ◽  
Transition To Turbulence ◽  
Energy Spectra ◽  
Small Scale ◽  
Two Dimensional ◽  
Secondary Instabilities ◽  
Vortex Tubes

Stability and transition to turbulence are studied in a simple incompressible two-dimensional bounded swirling flow with a rectangular planform – a vortex in a box. This flow is unstable to three-dimensional disturbances. The instability takes the form of counter-rotating swirls perpendicular to the axis which bend the vortex into a periodic wave. As these swirls grow in amplitude the primary vorticity is compressed into thin vortex layers. These develop secondary instabilities which roll up into vortex tubes. In this way the flow attains a turbulent state which is populated by intense elongated vortex tubes and weaker vortex layers which spiral around them. The flow was computed at two Reynolds numbers by spectral methods with up to 2563 resolution. At the higher Reynolds number broad three-dimensional shell-averaged energy spectra are found with nearly a decade of Kolmogorov k−5/3 law and small-scale isotropy.

Fine-scale structure of thin vortical layers

1998 ◽  
Vol 364 ◽  
pp. 297-318
Author(s):  
TAKASHI ISHIHARA ◽  
YUKIO KANEDA
Keyword(s):  
Velocity Field ◽  
Fourier Spectrum ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Scale Structure ◽  
Navier Stokes ◽  
Small Scale ◽  
Planar Jet ◽  
Exponential Decay Rate ◽  
Vortical Layer

A class of exact solutions of the Navier–Stokes equations is derived. Each of them represents the velocity field v=U+u of a thin vortical layer (a planar jet) under a uniform strain velocity field U in three-dimensional infinite space, and provides a simple flow model in which nonlinear coupling between small eddies plays a key role in small-scale vortex dynamics. The small-scale structure of the velocity field is studied by numerically analysing the Fourier spectrum of u. It is shown that the Fourier spectrum of u falls off exponentially with wavenumber k for large k. The Taylor expansion in powers of the coordinate (say y) in the direction perpendicular to the vortical layer suggests that the solution may be well approximated by a function with certain poles in the complex y-plane. The Fourier spectrum based on the singularities is in good agreement with that obtained numerically, where the exponential decay rate is given by the distance of the poles from the real axis of y.

scholarly journals Turbulence in the Atmosphere of B-Type Stars

1980 ◽  
Vol 51 ◽  
pp. 170-171
Author(s):  
Keiichi Kodaira
Keyword(s):  
Surface Layer ◽  
Velocity Field ◽  
Differential Rotation ◽  
Meridional Circulation ◽  
Three Dimensional ◽  
Scale Height ◽  
Small Scale ◽  
Two Dimensional ◽  
Viscosity Term ◽  
Pressure Scale

AbstractThe stationary turbulent surface layer, whose depth is of the order of the pressure scale height in the subphotospheric layer, was investigated for B-type stars, using the momentum and the continuity equations with the inertia term neglected but the turbulence-viscosity term included. The mean velocity field is dominated by the horizontal component of the meridional circulation, driven by the pressure-density unbalance in the radiative envelope of the rotating star, and the differential rotation induced by the Coriolis force.The model calculation for a B3IV-V star with the equatorial rotational velocity of 200 km/s led to the conclusions that the velocity field due to the differential rotation is of the order of 0.1-1 km/s, the velocity field of the meridional circulation itself is negligible, the velocity field of the three-dimensional shear turbulence is of the order of 0.1 km/s, and i t s scale is comparable to or less than the pressure scale height, the velocity field of the horizontal two-dimensional turbulence is of the order of 1-10 km/s, and i t s maximum scale ranges from a few times the pressure scale height to one-fiftieth of the stellar radius. If the index of the energy density law is close to 3.5, the turbulent surface layer may be dominated by the large scale (two-dimensional) barotropic eddies whose energy is fed by the small scale (three-dimensional) baroclinic turbulence in a way similar to the planetary atmospheres. In this case we may expect the tangential macroturbulence of the order of 1-10 km/s, though the interaction between this and the small-scale three-dimensional turbulence still remains to be investigated.

THREE-DIMENSIONAL LAMINAR SWIRLING FLOW IN A PIPE

2019 ◽  
Author(s):  
Rodrigo Vidal Cabral ◽  
Andre Damiani Rocha
Keyword(s):  
Swirling Flow ◽  
Three Dimensional

Extrusion-Based 3D Printing for Pharmaceuticals: Contemporary Research and Applications

2019 ◽  
Vol 24 (42) ◽  
pp. 4991-5008 ◽  
Author(s):  
Mohammed S. Algahtani ◽  
Abdul Aleem Mohammed ◽  
Javed Ahmad
Keyword(s):  
Cosmetic Surgery ◽  
Fused Deposition Modeling ◽  
Personalised Medicine ◽  
Organ Transplant ◽  
Three Dimensional ◽  
Dosage Forms ◽  
Release Profile ◽  
Small Scale ◽  
Drug Release Profile ◽  
Fused Deposition

Three-dimensional printing (3DP) has a significant impact on organ transplant, cosmetic surgery, surgical planning, prosthetics and other medical fields. Recently, 3 DP attracted the attention as a promising method for the production of small-scale drug production. The knowledge expansion about the population differences in metabolism and genetics grows the need for personalised medicine substantially. In personalised medicine, the patient receives a tailored dose and the release profile is based on his pharmacokinetics data. 3 DP is expected to be one of the leading solutions for the personalisation of the drug dispensing. This technology can fabricate a drug-device with complicated geometries and fillings to obtain the needed drug release profile. The extrusionbased 3 DP is the most explored method for investigating the feasibility of the technology to produce a novel dosage form with properties that are difficult to achieve using the conventional industrial methods. Extrusionbased 3 DP is divided into two techniques, the semi-solid extrusion (SSE) and the fused deposition modeling (FDM). This review aims to explain the extrusion principles behind the two techniques and discuss their capabilities to fabricate novel dosage forms. The advantages and limitations observed through the application of SSE and FDM for fabrication of drug dosage forms were discussed in this review. Further exploration and development are required to implement this technology in the healthcare frontline for more effective and personalised treatment.

scholarly journals Quantification of Measurement and Model Effects in Monopile Foundation Scour Protection Experiments

2021 ◽  
Vol 9 (6) ◽  
pp. 585
Author(s):  
Minghao Wu ◽  
Leen De Vos ◽  
Carlos Emilio Arboleda Chavez ◽  
Vasiliki Stratigaki ◽  
Maximilian Streicher ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Flow Field ◽  
Three Dimensional ◽  
Small Scale ◽  
Maximum Wave Height ◽  
Chaotic Flow ◽  
The Mean ◽  
Scour Protection ◽  
Damage Number ◽  
Measurement Effects

The present work introduces an analysis of the measurement and model effects that exist in monopile scour protection experiments with repeated small scale tests. The damage erosion is calculated using the three dimensional global damage number S3D and subarea damage number S3D,i. Results show that the standard deviation of the global damage number σ(S3D)=0.257 and is approximately 20% of the mean S3D, and the standard deviation of the subarea damage number σ(S3D,i)=0.42 which can be up to 33% of the mean S3D. The irreproducible maximum wave height, chaotic flow field and non-repeatable armour layer construction are regarded as the main reasons for the occurrence of strong model effects. The measurement effects are limited to σ(S3D)=0.039 and σ(S3D,i)=0.083, which are minor compared to the model effects.

scholarly journals Experimental and Numerical Investigation about Small Clearance Journal Bearings under Static Load Conditions

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Carlo Alberto Niccolini Marmont Du Haut Champ ◽  
Fabrizio Stefani ◽  
Paolo Silvestri
Keyword(s):  
Three Dimensional ◽  
Journal Bearings ◽  
Radial Clearance ◽  
Small Scale ◽  
Test Rig ◽  
Small Clearance ◽  
Dimensional Simulation ◽  
Dynamic Loading Conditions ◽  
Static And Dynamic Loading ◽  
Good Agreement

The aim of the present research is to characterize both experimentally and numerically journal bearings with low radial clearances for rotors in small-scale applications (e.g., microgas turbines); their diameter is in the order of ten millimetres, leading to very small dimensional clearances when the typical relative ones (order of 1/1000) are employed; investigating this particular class of journal bearings under static and dynamic loading conditions represents something unexplored. To this goal, a suitable test rig was designed and the performance of its bearings was investigated under steady load. For the sake of comparison, numerical simulations of the lubrication were also performed by means of a simplified model. The original test rig adopted is a commercial rotor kit (RK), but substantial modifications were carried out in order to allow significant measurements. Indeed, the relative radial clearance of RK4 RK bearings is about 2/100, while it is around 1/1000 in industrial bearings. Therefore, the same original RK bearings are employed in this new test rig, but a new shaft was designed to reduce their original clearance. The new custom shaft allows to study bearing behaviour for different clearances, since it is equipped with interchangeable journals. Experimental data obtained by this test rig are then compared with further results of more sophisticated simulations. They were carried out by means of an in-house developed finite element (FEM) code, suitable for thermoelasto-hydrodynamic (TEHD) analysis of journal bearings both in static and dynamic conditions. In this paper, bearing static performances are studied to assess the reliability of the experimental journal location predictions by comparing them with the ones coming from already validated numerical codes. Such comparisons are presented both for large and small clearance bearings of original and modified RKs, respectively. Good agreement is found only for the modified RK equipped with small clearance bearings (relative radial clearance 8/1000), as expected. In comparison with two-dimensional lubrication analysis, three-dimensional simulation improves prediction of journal location and correlation with experimental results.

scholarly journals Nonlinear effects of locally heterogeneous hydraulic conductivity fields on regional stream–aquifer exchanges

2015 ◽  
Vol 19 (11) ◽  
pp. 4531-4545 ◽  
Author(s):  
J. Zhu ◽  
C. L. Winter ◽  
Z. Wang
Keyword(s):  
Groundwater Flow ◽  
Effective Conductivity ◽  
Model Simulation ◽  
Three Dimensional ◽  
Small Scale ◽  
Heihe River ◽  
Effective Parameters ◽  
Aquifer Systems ◽  
Basin Scale ◽  
Local Grid

Abstract. Computational experiments are performed to evaluate the effects of locally heterogeneous conductivity fields on regional exchanges of water between stream and aquifer systems in the Middle Heihe River basin (MHRB) of northwestern China. The effects are found to be nonlinear in the sense that simulated discharges from aquifers to streams are systematically lower than discharges produced by a base model parameterized with relatively coarse effective conductivity. A similar, but weaker, effect is observed for stream leakage. The study is organized around three hypotheses: (H1) small-scale spatial variations of conductivity significantly affect regional exchanges of water between streams and aquifers in river basins, (H2) aggregating small-scale heterogeneities into regional effective parameters systematically biases estimates of stream–aquifer exchanges, and (H3) the biases result from slow paths in groundwater flow that emerge due to small-scale heterogeneities. The hypotheses are evaluated by comparing stream–aquifer fluxes produced by the base model to fluxes simulated using realizations of the MHRB characterized by local (grid-scale) heterogeneity. Levels of local heterogeneity are manipulated as control variables by adjusting coefficients of variation. All models are implemented using the MODFLOW (Modular Three-dimensional Finite-difference Groundwater Flow Model) simulation environment, and the PEST (parameter estimation) tool is used to calibrate effective conductivities defined over 16 zones within the MHRB. The effective parameters are also used as expected values to develop lognormally distributed conductivity (K) fields on local grid scales. Stream–aquifer exchanges are simulated with K fields at both scales and then compared. Results show that the effects of small-scale heterogeneities significantly influence exchanges with simulations based on local-scale heterogeneities always producing discharges that are less than those produced by the base model. Although aquifer heterogeneities are uncorrelated at local scales, they appear to induce coherent slow paths in groundwater fluxes that in turn reduce aquifer–stream exchanges. Since surface water–groundwater exchanges are critical hydrologic processes in basin-scale water budgets, these results also have implications for water resources management.

Sign in / Sign up

Export Citation Format

Share Document