scholarly journals Automatic fault detection of sensors in leather cutting control system under GWO-SVM algorithm

PLoS ONE ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. e0248515
Author(s):  
Ke Luo ◽  
Yingying Jiao
Keyword(s):  
Fault Detection ◽  
Principal Component ◽  
Support Vector ◽  
Svm Classifier ◽  
Gray Wolf ◽  
Existing Problems ◽  
Proposed Model ◽  
Svm Algorithm ◽  
Gray Wolf Optimizer ◽  
The Individual

The purposes are to meet the individual needs of leather production, improve the efficiency of leather cutting, and increase the product’s competitiveness. According to the existing problems in current leather cutting systems, a Fault Diagnosis (FD) method combining Convolutional Neural Network (CNN) and the Support Vector Machine (SVM) of Gray Wolf Optimizer (GWO) is proposed. This method first converts the original signal into a scale spectrogram and then selects the pre-trained CNN model, AlexNet, to extract the signal scale spectrogram’s features. Next, the Principal Component Analysis (PCA) reduces the obtained feature’s dimensionality. Finally, the normalized data are input into GWO’s SVM classifier to diagnose the bearing’s faults. Results demonstrate that the proposed model has higher cutting accuracy than the latest fault detection models. After model optimization, when c is 25 and g is 0.2, the model accuracy can reach 99.24%, an increase of 66.96% compared with traditional fault detection models. The research results can provide ideas and practical references for improving leather cutting enterprises’ process flow.

Enhancing WO3 gas sensor selectivity using a set of pollutant detection classifiers

Sensor Review ◽  
2018 ◽  
Vol 38 (1) ◽  
pp. 65-73 ◽  
Author(s):  
Rabeb Faleh ◽  
Sami Gomri ◽  
Mehdi Othman ◽  
Khalifa Aguir ◽  
Abdennaceur Kachouri
Keyword(s):  
Hybrid Approach ◽  
Principal Component ◽  
Sensor Data ◽  
Support Vector ◽  
Svm Classifier ◽  
K Nearest Neighbors ◽  
Classification Rate ◽  
Content Type ◽  
Linear Svm ◽  
The Individual

Purpose In this paper, a novel hybrid approach aimed at solving the problem of cross-selectivity of gases in electronic nose (E-nose) using the combination classifiers of support vector machine (SVM) and k-nearest neighbors (KNN) methods was proposed. Design/methodology/approach First, three WO3 sensors E-nose system was used for data acquisition to detect three gases, namely, ozone, ethanol and acetone. Then, two transient parameters, derivate and integral, were extracted for each gas response. Next, the principal component analysis (PCA) was been applied to extract the most relevant sensor data and dimensionality reduction. The new coordinates calculated by PCA were used as inputs for classification by the SVM method. Finally, the classification achieved by the KNN method was carried out to calculate only the support vectors (SVs), not all the data. Findings This work has proved that the proposed fusion method led to the highest classification rate (100 per cent) compared to the accuracy of the individual classifiers: KNN, SVM-linear, SVM-RBF, SVM-polynomial that present, respectively, 89, 75.2, 80 and 79.9 per cent as classification rate. Originality/value The authors propose a fusion classifier approach to improve the classification rate. In this method, the extracted features are projected into the PCA subspace to reduce the dimensionality. Then, the obtained principal components are introduced to the SVM classifier and calculated SVs which will be used in the KNN method.

scholarly journals Microgrid Fault Detection and Classification: Machine Learning Based Approach, Comparison, and Reviews

Energies ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 3460 ◽  
Author(s):  
Shahriar Rahman Fahim ◽  
Subrata K. Sarker ◽  
S. M. Muyeen ◽  
Md. Rafiqul Islam Sheikh ◽  
Sajal K. Das
Keyword(s):  
Fault Diagnosis ◽  
Fault Detection ◽  
Classification Model ◽  
Superior Performance ◽  
Fault Classification ◽  
Support Vector ◽  
Discrete Wavelet ◽  
Fault Detection And Classification ◽  
Proposed Model ◽  
The Individual

Accurate fault classification and detection for the microgrid (MG) becomes a concern among the researchers from the state-of-art of fault diagnosis as it increases the chance to increase the transient response. The MG frequently experiences a number of shunt faults during the distribution of power from the generation end to user premises, which affects the system reliability, damages the load, and increases the fault line restoration cost. Therefore, a noise-immune and precise fault diagnosis model is required to perform the fast recovery of the unhealthy phases. This paper presents a review on the MG fault diagnosis techniques with their limitations and proposes a novel discrete-wavelet transform (DWT) based probabilistic generative model to explore the precise solution for fault diagnosis of MG. The proposed model is made of multiple layers with a restricted Boltzmann machine (RBM), which enables the model to make the probability reconstruction over its inputs. The individual RBM layer is trained with an unsupervised learning approach where an artificial neural network (ANN) algorithm tunes the model for minimizing the error between the true and predicted class. The effectiveness of the proposed model is studied by varying the input signal and sampling frequencies. A level of considered noise is added with the sample data to test the robustness of the studied model. Results prove that the proposed fault detection and classification model has the ability to perform the precise diagnosis of MG faults. A comparative study among the proposed, kernel extreme learning machine (KELM), multi KELM, and support vector machine (SVM) approaches is studied to confirm the robust superior performance of the proposed model.

Batch process monitoring based on global enhanced multiple neighborhoods preserving embedding

2021 ◽  
pp. 014233122110447
Author(s):  
Hongjuan Yao ◽  
Xiaoqiang Zhao ◽  
Wei Li ◽  
Yongyong Hui
Keyword(s):  
Principal Component Analysis ◽  
Fault Detection ◽  
Objective Function ◽  
Principal Component ◽  
Batch Process ◽  
Component Analysis ◽  
Support Vector ◽  
Support Vector Data Description ◽  
Order Information ◽  
Multiple Neighborhoods

Batch process generally has varying dynamic characteristic that causes low fault detection rate and high false alarm rate, and it is necessary and urgent to monitor batch process. This paper proposes a global enhanced multiple neighborhoods preserving embedding based fault detection strategy for dynamic batch process. Firstly, the angle neighbor is defined and selected to compensate for the insufficient expression for the spatial similarity of samples only by using the distance neighbor, and the time neighbor is introduced to describe the time correlations between samples. These three types of neighbors can fully characterize the similarity of the samples in time and space. Secondly, considering the minimum reconstruction error and the order information of three types of neighbors, an enhanced objective function is constructed to prevent the loss of order information when neighborhood preserving embedding (NPE) calculates the reconstruction weights. Furthermore, the enhanced objective function and a global objective function are organically combined to extract both global and local features, to describe process dynamics and visualize process data in a low-dimensional space. Finally, a monitoring index based on support vector data description is constructed to eliminate adverse effects of non-Gaussian data for monitoring performance. The advantages of the proposed method over principal component analysis, neighborhood preserving embedding, dynamic principal component analysis and time NPE are demonstrated by a numerical example and the penicillin fermentation process simulation.

Efficient Feature Descriptor using Gabor Filter and Principal Component Analysis for Glaucoma Diagnosis

2021 ◽  
pp. 6787-6794
Author(s):  
Anisha Rebinth, Dr. S. Mohan Kumar
Keyword(s):  
Principal Component Analysis ◽  
Gabor Filter ◽  
Principal Component ◽  
Component Analysis ◽  
Disease Diagnosis ◽  
Image Features ◽  
Support Vector ◽  
Svm Classifier ◽  
Feature Descriptor ◽  
Glaucoma Diagnosis

An automated Computer Aided Diagnosis (CAD) system for glaucoma diagnosis using fundus images is developed. The various glaucoma image classification schemes using the supervised and unsupervised learning approaches are reviewed. The research paper involves three stages of glaucoma disease diagnosis. First, the pre-processing stage the texture features of the fundus image is recorded with a two-dimensional Gabor filter at various sizes and orientations. The image features are generated using higher order statistical characteristics, and then Principal Component Analysis (PCA) is used to select and reduce the dimension of the image features. For the performance study, the Gabor filter based features are extracted from the RIM-ONE and HRF database images, and then Support Vector Machine (SVM) classifier is used for classification. Final stage utilizes the SVM classifier with the Radial Basis Function (RBF) kernel learning technique for the efficient classification of glaucoma disease with accuracy 90%.

An Effective K-Means Clustering Based SVM Algorithm

2013 ◽  
Vol 333-335 ◽  
pp. 1344-1348
Author(s):  
Yu Kai Yao ◽  
Yang Liu ◽  
Zhao Li ◽  
Xiao Yun Chen
Keyword(s):  
Support Vector ◽  
Svm Classifier ◽  
Small Subset ◽  
Training Set ◽  
Data Mining Algorithms ◽  
Svm Algorithm ◽  
Svm Model ◽  
Separating Hyperplane ◽  
Regression Problems ◽  
Mining Algorithms

Support Vector Machine (SVM) is one of the most popular and effective data mining algorithms which can be used to resolve classification or regression problems, and has attracted much attention these years. SVM could find the optimal separating hyperplane between classes, which afford outstanding generalization ability with it. Usually all the labeled records are used as training set. However, the optimal separating hyperplane only depends on a few crucial samples (Support Vectors, SVs), we neednt train SVM model on the whole training set. In this paper a novel SVM model based on K-means clustering is presented, in which only a small subset of the original training set is selected to constitute the final training set, and the SVM classifier is built through training on these selected samples. This greatly decrease the scale of the training set, and effectively saves the training and predicting cost of SVM, meanwhile guarantees its generalization performance.

scholarly journals A Hybrid Multi-Objective Optimizer-Based SVM Model for Enhancing Numerical Weather Prediction: A Study for the Seoul Metropolitan Area

2021 ◽  
Vol 14 (1) ◽  
pp. 296
Author(s):  
Mohanad A. Deif ◽  
Ahmed A. A. Solyman ◽  
Mohammed H. Alsharif ◽  
Seungwon Jung ◽  
Eenjun Hwang
Keyword(s):  
Support Vector Machine ◽  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Support Vector ◽  
Gray Wolf ◽  
Particle Swarm Optimizer ◽  
Numerical Weather ◽  
Air Temperatures ◽  
Gray Wolf Optimizer ◽  
Accuracy And Stability

Temperature forecasting is an area of ongoing research because of its importance in all life aspects. However, because a variety of climate factors controls the temperature, it is a never-ending challenge. The numerical weather prediction (NWP) model has been frequently used to forecast air temperature. However, because of its deprived grid resolution and lack of parameterizations, it has systematic distortions. In this study, a gray wolf optimizer (GWO) and a support vector machine (SVM) are used to ensure accuracy and stability of the next day forecasting for minimum and maximum air temperatures in Seoul, South Korea, depending on local data assimilation and prediction system (LDAPS; a model of local NWP over Korea). A total of 14 LDAPS models forecast data, the daily maximum and minimum air temperatures of in situ observations, and five auxiliary data were used as input variables. The LDAPS model, the multimodal array (MME), the particle swarm optimizer with support vector machine (SVM-PSO), and the conventional SVM were selected as comparison models in this study to illustrate the advantages of the proposed model. When compared to the particle swarm optimizer and traditional SVM, the Gray Wolf Optimizer produced more accurate results, with the average RMSE value of SVM for T max and T min Forecast prediction reduced by roughly 51 percent when combined with GWO and 31 percent when combined with PSO. In addition, the hybrid model (SVM-GWO) improved the performance of the LDAPS model by lowering the RMSE values for T max Forecast and T min Forecast forecasting from 2.09 to 0.95 and 1.43 to 0.82, respectively. The results show that the proposed hybrid (GWO-SVM) models outperform benchmark models in terms of prediction accuracy and stability and that the suggested model has a lot of application potentials.

scholarly journals A Vision based Indian Traffic Sign Classification

2020 ◽  
Vol 8 (6) ◽  
pp. 3132-3141
Keyword(s):  
Support Vector ◽  
Svm Classifier ◽  
Traffic Sign ◽  
Illumination Variation ◽  
Svm Algorithm ◽  
Speed Up ◽  
Surf Features ◽  
Overall Performance ◽  
Whisker Plot ◽  
Traffic Sign Classification

In this paper, an algorithm is proposed to classify the Indian traffic sign as mandatory cautionary and informatory class. In order to complete the task, system extracted the speed up robust features (SURF) from the Indian traffic sign data, and exploited these features to train support vector machine (SVM) algorithm. Combination of SURF features and SVM classifier makes system robust for scale variation, rotation, translation and illumination variation as well as generalization is achieved. Dimension of features have been reduced by choosing a sub set of features. Whisker and box plot visualization utilized to understand the features data. Whisker plot visualization concluded about the range, skewness, median and outliers of feature data therefore, it makes the system capable to keep good features and back out from irrelevant features. Feature refinement reduces the computational complexity. The results evaluated narrate that the overall performance of proposed algorithm is efficient.

scholarly journals Intelligent Fault Detection, Diagnosis and Health Evaluation for Industrial Robots

Mechanika ◽  
2021 ◽  
Vol 27 (1) ◽  
pp. 70-79
Author(s):  
Huan-Kun HSU ◽  
Hsiang-Yuan TING ◽  
Ming-Bao HUANG ◽  
Han-Pang HUANG
Keyword(s):  
Fault Detection ◽  
Evaluation System ◽  
Industrial Robot ◽  
Principal Component ◽  
Industrial Robots ◽  
Support Vector ◽  
Health Evaluation ◽  
Original Design ◽  
Statistical Process ◽  
The Time Domain

The focus of this study is development of an intelligent fault detection, diagnosis and health evaluation system for real industrial robots. The system uses principal component analysis based statistical process control with Nelson rules for online fault detection. Several suitable Nelson rules are chosen for sensitive detection. When a variation is detected, the system performs a diagnostic operation to acquire features of the time domain and the frequency domain from the motor encoder, motor current sensor and external accelerometer for fault diagnosis with a multi-class support vector machine. Additionally, a fuzzy logic based robot health index generator is proposed for evaluating the health of the robot, and the generator is an original design to reflect the health status of the robot. Finally, several real aging-related faults are implemented on a six-axis industrial robot, DRV90L7A6213N by Delta Electronics, and the proposed system is validated effectively by the experimental results.

scholarly journals A Fusion-Based Hybrid-Feature Approach for Recognition of Unconstrained Offline Handwritten Hindi Characters

2021 ◽  
Vol 13 (9) ◽  
pp. 239
Author(s):  
Danveer Rajpal ◽  
Akhil Ranjan Garg ◽  
Om Prakash Mahela ◽  
Hassan Haes Alhelou ◽  
Pierluigi Siano
Keyword(s):  
Character Recognition ◽  
Large Population ◽  
Principal Component ◽  
Support Vector ◽  
Discrete Wavelet ◽  
Hybrid Features ◽  
Efficient Management ◽  
Novel Approach ◽  
Proposed Model ◽  
Machine Learning Approach

Hindi is the official language of India and used by a large population for several public services like postal, bank, judiciary, and public surveys. Efficient management of these services needs language-based automation. The proposed model addresses the problem of handwritten Hindi character recognition using a machine learning approach. The pre-trained DCNN models namely; InceptionV3-Net, VGG19-Net, and ResNet50 were used for the extraction of salient features from the characters’ images. A novel approach of fusion is adopted in the proposed work; the DCNN-based features are fused with the handcrafted features received from Bi-orthogonal discrete wavelet transform. The feature size was reduced by the Principal Component Analysis method. The hybrid features were examined with popular classifiers namely; Multi-Layer Perceptron (MLP) and Support Vector Machine (SVM). The recognition cost was reduced by 84.37%. The model achieved significant scores of precision, recall, and F1-measure—98.78%, 98.67%, and 98.69%—with overall recognition accuracy of 98.73%.

Sign in / Sign up

Export Citation Format

Share Document