scholarly journals Pengembangan Antena Mikrostrip Susun untuk Radar Pengawas Pantai

2016 ◽  
Vol 13 (2) ◽  
pp. 55
Author(s):  
Fitri Yuli Zulkiflia ◽  
Yuyu Wahyu ◽  
Basari ◽  
Eko Tjipto Raharjo
Keyword(s):  
Return Loss ◽  
Impedance Bandwidth ◽  
Sidelobe Level ◽  
Half Power ◽  
Cst Microwave Studio

Makalah ini membahas pengembangan antena mikrostrip yang disusun secara linier sebanyak empat elemen untuk aplikasi radar pengawas pantai. Teknik pencatuan yang digunakan untuk mencatu antena susun ini adalah proximity coupled. Desain antena menggunakan software CST microwave studio dan dirancang untuk bekerja di frekuensi 9,4 GHz. Hasil simulasi memperlihatkan impedance bandwidth antena pada return loss ≤ -9,54 dB adalah 760 MHz dari  9,34-10,1 GHz dan dari  hasil ukur  adalah 860 MHz dari frekuensi  9,35-10,21 GHz. Di samping itu, hasil simulasi menunjukkan half power beamwidth (HPBW) pada phi=0 sebesar 23,7o dengan sidelobe level (SLL) sebesar -12,03 dB, sementara pada phi=90 diperoleh  HPBW sebesar 77,2o dengan SLL tertekan sampai -19,78 dB. Sebagai tambahan, gain dari antena diperoleh sebesar 11,33 dB.  Adapun  hasil pengukuran menunjukkan hasil HPBW pada phi=0 sebesar 20o dengan SLL  sebesar -18,9 dB dan pada phi=90 diperoleh HPBW sebesar 65o dengan SLL -15,51 dB.

scholarly journals Microstrip Patch Antenna Loaded with Squares Shapes Metamaterial Structure For Bandwidth Improvement and Return loss

2015 ◽  
pp. 315-319
Author(s):  
Rahul Rajoria
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Metamaterial Structure ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna ◽  
Cst Microwave Studio

In this work, The drawback of Patch Antenna was impedance bandwidth. For this purpose, Rectangular microstrip patch antenna loaded with metamaterial structure has been proposed for improving the bandwidth by using CST MICROWAVE STUDIO in this paper. The proposed antenna is designed at a height 3.2 from the ground plane by using CST MICROWAVE STUDIO. The bandwidth of Microstrip patch antenna is 12 .1MHz and return loss is -10.36 dB at a band.The bandwidth of desired antenna is increased up 61.7 MHz at 2.925 GHz and 27 MHz at 1.965 GHz. The return loss of proposed antenna is reduced up to -35.55db at 2.925 GHz and -29 db at 1.965 GHz. This proposed design has small size, easy to fabricate and better directivity.

scholarly journals Triangular Slot-Loaded Wideband Planar Rectangular Antenna Array for Millimeter-Wave 5G Applications

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 778
Author(s):  
Iftikhar Ahmad ◽  
Houjun Sun ◽  
Umair Rafique ◽  
Zhang Yi
Keyword(s):  
Antenna Array ◽  
Millimeter Wave ◽  
Communication Systems ◽  
Ground Plane ◽  
Simulated Data ◽  
Impedance Bandwidth ◽  
Antenna Element ◽  
Single Antenna ◽  
Rectangular Patch ◽  
Half Power

This paper presents a design of a triangular slot-loaded planar rectangular antenna array for wideband millimeter-wave (mm-wave) 5G communication systems. The proposed array realizes an overall size of 35.5 × 14.85 mm2. To excite the array elements, a four-way broadband corporate feeding network was designed and analyzed. The proposed array offered a measured impedance bandwidth in two different frequency ranges, i.e., from 23 to 24.6 GHz and from 26 to 45 GHz. The single-antenna element of the array consists of a rectangular patch radiator with a triangular slot. The partial ground plane was used at the bottom side of the substrate to obtain a wide impedance bandwidth. The peak gain in the proposed array is ≈12 dBi with a radiation efficiency of >90%. Furthermore, the array gives a half-power beamwidth (HPBW) of as low as 12.5°. The proposed array has been fabricated and measured, and it has been observed that the measured results are in agreement with the simulated data.

scholarly journals Band notched self complementaryultra wideband antenna for wireless applications

2018 ◽  
Vol 7 (2.8) ◽  
pp. 529 ◽  
Author(s):  
Ch Ramakrishna ◽  
G A.E.Satish Kumar ◽  
P Chandra Sekhar Reddy
Keyword(s):  
High Frequency ◽  
Return Loss ◽  
Wide Band ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Relative Dielectric Permittivity ◽  
Frequency Range ◽  
Ground Structure ◽  
Wireless Applications ◽  
Patch Edge

This paper presents a band notched WLAN self complementaryultra wide band antenna for wireless applications. The proposed antenna encounters a return loss (RL) less than -10dB for entire ultra wideband frequency range except band notched frequency. This paper proposes a hexagon shape patch, edge feeding, self complementary technique and defective ground structure. The antenna has an overall dimensionof 28.3mm × 40mm × 2mm, builton  substrate FR4 with a relative dielectric permittivity 4.4. And framework is simulated finite element method with help of high frequency structured simulator HFSSv17.2.the proposed antenna achieves a impedance bandwidth of 8.6GHz,  band rejected WLAN frequency range 5.6-6.5 GHz with  vswr is less than 2.

scholarly journals A MIMO H-shape Dielectric Resonator Antenna for 4G Applications

2018 ◽  
Vol 10 (2) ◽  
pp. 648
Author(s):  
S. Salihah ◽  
M. H. Jamaluddin ◽  
R. Selvaraju ◽  
M. N. Hafiz
Keyword(s):  
Electrical Properties ◽  
Dielectric Resonator ◽  
Return Loss ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Good Potential ◽  
Slot Coupling

In this article, a Multiple-Input-Multiple-Output (MIMO) H-shape Dielectric Resonator Antenna (DRA) is designed and simulated at 2.6 GHz for 4G applications. The proposed structure consists of H-shape DRA ( =10) which is mounted on FR4 substrate ( =4.6), and feed by two different feeding mechanisms. First, microstrip with slot coupling as Port 1. Second, coaxial probe as Port 2. The electrical properties of the proposed MIMO H-shape DRA in term of return loss, bandwidth and gain are completely obtained by using CST Microwave Studio Suite Software. The simulated results demonstrated a return loss more than 20 dB, an impedance bandwidth of 26 % (2.2 – 2.9 GHz), and gain of 6.11 dBi at Port 1. Then, a return loss more than 20 dB, an impedance bandwidth of 13 % (2.2 – 2.7 GHz), and gain of 6.63 dBi at Port 2. Both ports indicated impedance bandwidth more than 10 %, return loss lower than 20 dB, and gain more than 10 dBi at 2.6 GHz. The simulated electrical properties of the proposed design show a good potential for LTE applications.

scholarly journals DESAIN ANTENA MIKROSTRIP UNTUK ALTERNATIF ANTENA SIDEBAND DVOR (DOPPLER VHF OMNIDIRECTIONAL RANGE)

2020 ◽  
Vol 5 (1) ◽  
pp. 50-58
Author(s):  
Totok Warsito ◽  
Yuyun Suprapto ◽  
Margono Margono ◽  
Romma Diana
Keyword(s):  
Return Loss ◽  
Cst Microwave Studio

Antena merupakan salah satu perangkat penting yang ada pada sistem navigasi Doppler VOR (DVOR). Saat ini pengembangan antena dengan biaya produksi rendah menjadi salah satu alternatif tujuan para peneliti. Salah satu teknologi yang banyak digunakan sebagai solusinya adalah antena berbasis mikrostrip. Sebab antena berbasis mikrostrip menawarkan biaya produksi yang sangat rendah dibandingkan dengan jenis antena lain. Antena yang dipakai pada sistem DVOR saat ini adalah antena Alford Loop. Pada penelitian ini dilakukan perancangan antena mikrostrip rectangular dengan pencatuan coaxial sebagai alternatif antena DVOR yang bekerja pada frekuensi VHF (frekuensi 108-118 MHz), sehingga hal ini memungkinkan biaya produksi yang lebih murah dibandingkan antenna Alford Loop pada umumnya. Perancangan dan simulasi antena dilakukan menggunakan software CST Microwave Studio menggunakan material FR-4 dengan konstanta dielektrik (). Hasil perancangan dan simulasi antena menunjukkan return loss (S11) sebesar -16.1 dB dan gain sebesar 4 dB pada frekuensi 113 MHz. Dari hasil simulasi juga dapat diketahui bahwa memiliki polarisasi linier horizontal dan polaradiasi yang bersifat omni-directional.

scholarly journals 5G Fixed Beam Switching on Microstrip Patch Antenna

2017 ◽  
Vol 7 (2) ◽  
pp. 975
Author(s):  
Low Ching Yu ◽  
Muhammad Ramlee Kamarudin
Keyword(s):  
Communication System ◽  
Beam Forming ◽  
Impedance Bandwidth ◽  
Wave Band ◽  
Coverage Area ◽  
Low Profile ◽  
Half Power ◽  
Switching Method ◽  
Beam Switching ◽  
Fixed Beam

<span lang="EN-US">5G technology is using millimeter-wave band to improve the wireless communication system.  However, narrow transmitter and receiver beams have caused the beam coverage area to be limited. Due to propagation limitations of mm wave band, beam forming technology with multi-beam based communication system, has been focused to overcome the problem. In this letter, a fixed beam switching method is introduced. By changing the switches, four different configurations of patch array antennas are designed to investigate their performances in terms of radiation patterns, beam forming angle, gain, half-power bandwidth and impedance bandwidth at 28 GHz operating frequency for 5G application. Mircostrip antenna is preferred due to its low profile, easy in feeding and array configurations. Three different beam directions had been formed at -15°, 0°, and 15° with half-power bandwidth of range 45˚ to 50˚.</span>

scholarly journals Trapezoid Shape Patch Antenna for WLAN Application

2019 ◽  
Vol 8 (9S) ◽  
pp. 512-516
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Design Parameters ◽  
Impedance Bandwidth ◽  
Area Network ◽  
S Parameter

In this paper,CPW fed Trapezoid shape patch antenna is analyzed and investigated for Wireless Local Area Network (WLAN) application. The proposed antenna is fabricated on FR4 substrate having dimensions of 19mm ×21.2mm ×1.6mm. It resonates at 5.44 GHz frequency with peak return loss of 25.8 dB. The parametric study of proposed antenna is carried out to understand the effect of different values of ground plane on the impedance bandwidth, return loss of the antenna andalso to optimize the antenna parameters. The CPW-fed is used to enhance the bandwidth and to reduce the return loss of the antenna. The importance of different design parameters like current distribution, S-parameter, gain, and radiation pattern are studied. The results of the proposed antenna are useful for WLAN Application.

scholarly journals Beamwidth-Enhanced Low-Profile Dual-Band Circular Polarized Patch Antenna for CNSS Applications

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Hongmei Liu ◽  
Chenhui Xun ◽  
Shaojun Fang ◽  
Zhongbao Wang
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Coupled Line ◽  
Low Profile ◽  
Feed Network ◽  
Single Input ◽  
Half Power

A low-profile dual-band circular polarized (CP) patch antenna with wide half-power beamwidths (HPBWs) is presented for CNSS applications. Simple stacked circular patches are used to achieve dual-band radiation. To enhance the HPBW for the two operation bands, a dual annular parasitic metal strip (D-APMS) combined with reduced ground plane (R-GP) is presented. A single-input feed network based on the coupled line transdirectional (CL-TRD) coupler is also proposed to provide two orthogonal modes at the two frequency bands simultaneously. Experimental results show that the 10 dB impedance bandwidth is 32.7%. The 3 dB axial ratio (AR) bandwidths for the lower and upper bands are 4.1% and 6.5%, respectively. At 1.207 GHz, the antenna has the HPBW of 123° and 103° in the xoz and yoz planes, separately. And the values are 127° and 113° at 1.561 GHz.

Circularly Polarized Rectangular Microstrip Patch Antenna with Finite Ground Plane

2015 ◽  
Vol 4 (2) ◽  
pp. 74
Author(s):  
Sanyog Rawat ◽  
Kamlesh Kumar Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

<p class="Abstract"><span style="font-weight: normal;">In this paper a new geometry of patch antenna is proposed with improved bandwidth and circular polarization. The radiation performance of circularly polarized rectangular patch antenna is investigated by applying IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna.</span> <span style="font-weight: normal;">Finite Ground truncation technique is used to obtain the desired results. The simulated return loss, axial ratio and smith chart with frequency for the proposed antenna is reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slits, the impedance bandwidth can be enhanced upto 10.15 % as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.</span></p><p> </p><p> </p>

scholarly journals A Compact Broadband Antenna with Dual-Resonance for Implantable Devices

Micromachines ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 59 ◽  
Author(s):  
Rongqiang Li ◽  
Bo Li ◽  
Guohong Du ◽  
Xiaofeng Sun ◽  
Haoran Sun
Keyword(s):  
Patch Antenna ◽  
Absorption Rate ◽  
Return Loss ◽  
Specific Absorption Rate ◽  
Implantable Devices ◽  
Impedance Bandwidth ◽  
Compact Structure ◽  
Resonant Frequencies ◽  
Broadband Antenna ◽  
Dual Resonance

A compact broadband implantable patch antenna is designed for the field of biotelemetry and experimentally demonstrated using the Medical Device Radiocommunications Service (MedRadio) band (401–406 MHz). The proposed antenna can obtain a broad impedance bandwidth by exciting dual-resonant frequencies, and has a compact structure using bent metal radiating strips and a short strategy. The total volume of the proposed antenna, including substrate and superstrate, is about 479 mm3 (23 × 16.4 × 1.27 mm3). The measured bandwidth is 52 MHz (382–434 MHz) at a return loss of −10 dB. The resonance, radiation and specific absorption rate (SAR) performance of the antenna are examined and characterized.

Sign in / Sign up

Export Citation Format

Share Document