scholarly journals Estimation of the autoclave and different surface treatments on microleakage between soft liner and heat-cured acrylic

2021 ◽  
Vol 24 (4) ◽  
Author(s):  
Hawraa Khalid Aziz ◽  
Shurooq Falih Hasan
Keyword(s):  
Co2 Laser ◽  
Mean Value ◽  
Surface Treatments ◽  
Control Group ◽  
Denture Base ◽  
Mean Values ◽  
The Third ◽  
Digital Microscope ◽  
Soft Liner ◽  
Post Hoc

Objective: The present study was oriented to estimate the effect of different surface treatments on the microleakage between the soft liner and acrylic with and without the use of autoclave as disinfection method. Material and Methods: Sixty samples were split into two groups: the autoclaved groups and non-autoclaved groups. Each one subdivided into three groups: first one without any treatments as a control group; in the second group surface of the samples were treated with CO2 laser (10.6 nm wavelength for 15 seconds), and in the third group the surface was treated with sandblasting. All the samples exposed to thermocycling, then the microleakage test was evaluated by gauging dye penetration depth between the soft liner and acrylic disc using a digital microscope. Data analyzed statistically by One-way ANOVA and Tukey's post-hoc tests. In addition, t-test was used for comparison between two groups . Results: The maximum mean values for the microleakage were observed in the untreated group (control) followed by the group treated by CO2 laser and the lowest mean value of microleakage was related to the third group for both non-autoclaved and autoclaved groups with significant differences among them. In addition, depending on the use of autoclave, there was non-significant in all studied groups. Conclusions: There was a decrease in the microleakage when the surface treated with CO2 laser and sandblast. The use of autoclave did not badly change the microleakage between the soft liner and denture base. Keywords Microleakage; Soft liner; Autoclave; CO2 laser; Sandblast.

CORRELATION OF SERUM MAGNESIUM LEVELS WITH FASTING PLASMA GLUCOSE IN TYPE 2 DIABETES MELLITUS

2021 ◽  
pp. 16-18
Author(s):  
Nishanth Kumar ◽  
Malathi R D ◽  
Ramadevi M
Keyword(s):  
Diabetes Mellitus ◽  
Plasma Glucose ◽  
Fasting Plasma Glucose ◽  
Serum Magnesium ◽  
Fasting Blood Glucose ◽  
Mean Value ◽  
Control Group ◽  
Mean Values ◽  
Fasting Plasma ◽  
Increased Risk

Background: Diabetes mellitus is a metabolic disorder of multifactorial origin characterized by hyperglycemia and disturbances of glucose , fat and protein metabolism. Hypomagnesemia is been associated with chronic and uncontrolled diabetes mellitus. Magnesium deciency in diabetes is known to be associated with increased risk of microvascular and macrovascular complications. The aim of this study is to estimate fasting plasma glucose and serum magnesium levels and to assess the correlation of hypomagnesemia with abnormal fasting plasma glucose values. Material and Methods: The study was done at Government Medical College, Nizamabad. 80 subjects were recruited out of whom 40 apparently normal persons were taken as control group and the second group of 40 patients with known history of diabetes. The fasting plasma glucose(FPG) was estimated by GOD-POD method and serum Magnesium(Mg) levels were estimated using the Chemchek Mg kit which is based on Xylidyl Blue with ACTS method. Results :The mean values of fasting plasma glucose was 87.1 mg/dL in non diabetics when compared to 159.4 mg/dL in diabetics while Serum magnesium levels in control subjects had a mean value of 2.19mg/dLand 1.8mg/dLin diabetics. The data was analysed and found to be statistically signicant with a negative correlation between plasma magnesium and fasting blood glucose. Conclusion: There is signicant hypomagnesaemia which correlates increased fasting plasma glucose values in diabetics when compared to non diabetics and therefore assessing the serum magnesium levels may help in reducing risk of complications.

scholarly journals The Effect of Smoking on the Lipid Profile of Inhabitant Smokers of Hasilpur, District Bahawalpur, Pakistan

2020 ◽  
Vol 10 (2) ◽  
pp. 82-86
Author(s):  
Mushtaq Hussain Lashari ◽  
Sumbel Sumera ◽  
Umer Farooq ◽  
Zia Ur Rehman ◽  
Nuzhat Sial ◽  
...  
Keyword(s):  
Lipid Profile ◽  
Serum Triglyceride ◽  
Mean Value ◽  
Heavy Smoker ◽  
Control Group ◽  
Mean Values ◽  
Significant Difference ◽  
The Mean ◽  
Control Light ◽  
Heavy Smokers

Background: Health problem are culturally associated with smoking in developing countries. Many hazardous chemicals are taken up by direct or passive smoking causing lipid peroxidation resulting in oxidative stress. Objectives: To estimate the occurrence of smoking and its effects on the lipid profile in populations of Hasilpur, Pakistan. Methodology: The current study was conducted from April - August 2014. Out of 247 apparently healthy subjects of both genders (male=220; female=27), 134 were smokers and 113 were non-smokers. In order to analyze lipid profile, blood samples were collected in early morning hours from the selected members who were asked to fast all night. By using Chem-100 chemistry analyzer, cholesterol, triglyceride, HDL, LDL and VLDL were analyzed. Results: The overall prevalence of smokers was 54.25%. The results showed 60.9% prevalence in males and 0% in females. The mean value of serum triglyceride in control, light smokers and heavy smokers was 147.4±11.7mg/dl, 190.8±41.4 and 205.3±29.7mg/dl, respectively. The results of cholesterol in control, light smokers and heavy smokers were 147.38±7.99mg/dl, 136.8 ±12. 8mg/dl and 173.44±8.63mg/dl, respectively. There was a considerable distinction in the mean level of serum triglyceride and cholesterol between the control group, light smokers and heavy smoker groups (P<00.5). The mean value of HDL of control, light smokers and heavy smokers was 30.93±1.30mg/dl, 31.10±2.45 and 34.58±1.55mg/dl, respectively. The mean values of LDL and VLDL of control, light smokers and heavy smokers were 110.46±3.63mg/dl, 106.00±4.52mg/dl, 117.19±3.48mg/dl and 33.54±3.11mg/dl, 49±9.02mg/dl, 41.06±5.34mg/dl, respectively. There was significant difference in the mean level of HDL, LDL and VLDL between the control group, light smokers and heavy smoker groups (P<0.05). Conclusion: This study concluded that smoking is the reasons of variation in the lipid profile. Elevated period of smoking and the number of smoked cigarettes/day reason the alteration in serum lipid levels and is probably related with increased danger for coronary artery disease.

The Effect of Gongronema Latifolum (Utazi) on Some Haematological Parameters of Rabbit

2020 ◽  
Author(s):  
Obeagu Emmanuel Ifeanyi
Keyword(s):  
Mean Value ◽  
Control Group ◽  
Mean Values ◽  
Platelet Counts ◽  
Group A ◽  
The Mean ◽  
Group B ◽  
Differential White Blood Cell ◽  
Group D ◽  
Gongronema Latifolium

The hematological features of Gongronema latifolium, aqueous leaves extract was evaluated using standard methods. After 10 days of consecutive infusions into 9 experimental animals (rabbits). The rabbits were monitored and the following parameters determined; hemoglobin (HB), PCV, Platelet, WBC, Differential White Blood Cell. The Rabbits were grouped into 4, one consisting of control (group A), group B was fed with 0.5 mg/kg, group C with 1.0 mg/kg, and Group D with 1.5mg/kg of the aqueous extract of Gongronemalatifolium. The mean values obtained for hemoglobin estimation for the control group is 5.9 ± 4.1 g/dl, 9.1 ± 2.9 g/dl for group B 10.2 ± 1.8 g/dl for group C and 12.8 ± 0.1 g/dl for group D with no significant increase on the PCV estimation, the mean value for the control (group A) is 17.7 ± 12.3%, 27.3 ± 8.7% for group B, group C (30.6 ± 5.4%) and D (28.4 ± 0.3) show increase that statistically significant (p > 0.01). the platelet counts of group C (600 ± 0 x 109/L) and D(600 ± 0 x 109/L) show significant increase (p > 0.01) when compared with the control (600 ± 00). But the platelet value of group B (550 ± 50 x 109/L) shows no difference. No significant changes were observed in the White Blood Counts of the test groups B (3.5 ± 0.5 x 109/L), C (1.9 + 2.1 x 109/L) and D(3.6 ± 0.4) when compared with the control group (2.9 ± 1.9). The values obtained from the differential White Blood Counts (Neutrophils, Lymphocytes, Eosinophils and Monocytes) were not significant. Therefore, Gongronemalatifolium, when properly taken as a nutritional diet, causes beneficial changes on hemoglobin, packed cell volumes and platelet counts of consumers.

CD59 Deficient Granulocytes in High Risk Groups of Myelodysplastic Syndromes (MDS).

Blood ◽  
2004 ◽  
Vol 104 (11) ◽  
pp. 4717-4717
Author(s):  
Georgia Kaiafa ◽  
Vasiliki Tsavdaridou ◽  
Athanasios Papadopoulos ◽  
Christos Savopoulos ◽  
Apostolos Hatzitolios ◽  
...  
Keyword(s):  
Normal Subjects ◽  
Risk Groups ◽  
Mean Value ◽  
Control Group ◽  
Refractory Anaemia ◽  
Mean Values ◽  
Significant Difference ◽  
The Mean ◽  
Group B ◽  
Pnh Clone

Abstract Background: Blood cells are deficient in membrane-bound glycosyl-phosphatidylinositol (GPI)-anchored proteins in paroxysmal nocturnal hemoglobinuria (PNH) because of an acquired disorder of the pluripotent stem cell. CD55 and CD59 antigens are the most common GPI-anchored proteins that are used for the diagnosis of the presence of PNH clone. The association of MDS with PNH is rather controversial. There are few published individual cases of PNH arrived from a previous MDS or MDS following PNH. Aim: Recent studies have demonstrated the existence of PNH clone in some MDS patients. These studies were performed mostly on erythrocytes and to the best of our knowledge they are only 4. Granulocytes appear to be more sensitive markers of PNH clone existence than erythrocytes and therefore we investigate the expression of PNH clone on granulocytes of patients with MDS. Material-Methods: A total number of 95 patients 25–80 yrs old with MDS {A:19 with refractory anaemia (RA), B:9 with refractory anaemia with ring sideroblasts (RARS), C:17 with refractory anaemia with excess blasts (RAEB), D: 12 with refractory anaemia with excess blasts in transformation (RAEB-t) and E: 19 with chronic myelomonocytic leukemia (CMLL)} and 19 healthy donors were included in our study. The presence of GPI-anchored proteins (CD55, CD59)-deficient granulocytes was examined by flow cytometry. For the detection of the PNH clone the commercial kit by Beckman Coulter (cellquant CD55/CD59) was used. Statistical analysis was made by ANOVA, while Robust test was performed because there was no homogeneity of variances by ANOVA. Results: Table 1 shows the percentages of CD55 and CD59 deficient granulocytes in the 5 groups of pts with MDS comparing with the control group. a) Although the mean values of CD55 deficient granulocytes in the groups RAEB, RAEB-t and CMLL were higher enough than those of the normal subjects, there were no statistically significant differences (p>0.10) in the comparison of the mean values of CD55 deficient granulocytes between each group of patients with the control group. b) On the contrary there was a very statistically significant difference in the comparison of the mean value of CD59 deficient granulocytes between the three last groups (C, D and E) of pts with the control group (p< 0.086, p< 0.001 and p<0.001 respectively). The percentages of CD55 and CD59 deficient granulocytes in the 5 groups of patients with MDS and in the control group CD55 CD55 CD59 CD59 Groups N Mean Value Std deviation Mean Value Std deviation A (RA) 19 2.89 2.79 2.91 2.85 B (RARS) 9 1.05 1.14 3.89 3.63 C (RAEB) 17 4.78 4.76 11.75 6.06 D (RAEB-t) 12 4.23 2.85 23.76 8.53 E (CMLL) 19 6.01 4.97 38.26 16.18 Control 19 3.67 2.89 3.67 2.89 Total 95 4.00 3.87 14.44 16.39 Conclusions: There are relatively large CD59 negative subpopulations (mean values 11.75–38.26%) of granulocytes in the last three groups (RAEB, RAEB-t, CMLL) of MDS patients. On the contrary the two low risk forms (RA, RARS) revealed no such populations. Non-expression of CD59 antigen on granulocytes is a more sensitive marker than that of CD55 antigen for the presence of a possible PNH clone in MDS patients.

scholarly journals Foetal Haemoglobin, Erythrocytes Containing Foetal Haemoglobin, and Hematological Features in Congolese Patients with Sickle Cell Anaemia

Anemia ◽  
2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
L. Tshilolo ◽  
V. Summa ◽  
C. Gregorj ◽  
C. Kinsiama ◽  
J. A. Bazeboso ◽  
...  
Keyword(s):  
Sickle Cell ◽  
Mean Value ◽  
Hplc Method ◽  
Control Group ◽  
Foetal Haemoglobin ◽  
Heterogeneous Distribution ◽  
Mean Values ◽  
F Cells ◽  
Low Levels ◽  
And Control

High HbF levels and F cells are correlated with reduced morbidity and mortality in sickle cell disease (SCD). This paper was designed to determine the HbF and F cells levels in Congolese sickle cell anemia (SCA) patients in order to determine their impact on the expression of SCD.Population and Method. HbF levels were measured in 89 SCA patients (mean age 11.4 yrs) using a standard HPLC method. F cell quantitation was done in a second group of SCA patients (, mean age 8.9 yrs) and compared with a control group (, mean age 5 yrs). F cells were quantified by a cytofluorometric system (MoAb-HbF—FITC; cut off at 0.5%).Results. The mean value of HbF was 7.2%  5.0 with heterogeneous distribution, most patients (76%) having HbF < 8%. Mean values of F-cells in SCA patients and control group were 5.4%  7.6 (median: 2.19% ; range 0,0–30,3%) and 0.5%  1.6 (median 0.0, range 0–5.18), respectively. SCA patients with F cells >4.5% developed less painful crisis and had higher percentage of reticulocytes.Conclusion. Congolese SCA patients displayed low levels of HbF and F-cells that contribute to the severity of SCD.

scholarly journals Measurement of glycosaminoglycans in canine synovial fluid and its correlation with the cause of secondary osteoarthritis, age and body weight

2012 ◽  
Vol 81 (3) ◽  
pp. 287-294 ◽  
Author(s):  
Radka Andrysíková ◽  
Hana Kudláčková ◽  
Miroslav Toman ◽  
Alois Nečas
Keyword(s):  
Body Weight ◽  
Synovial Fluid ◽  
Mean Value ◽  
Control Group ◽  
Joint Cartilage ◽  
Mean Values ◽  
Secondary Osteoarthritis ◽  
Age Related ◽  
Normal Body Weight ◽  
And Control

Glycosaminoglycans are natural components of healthy joint cartilage and they also appear in healthy synovial fluid. An increased amount of glycosaminoglycans in synovial fluid is believed to be a marker of secondary osteoarthritis, regardless of its primary cause. The aim of our study was to define the relationship between glycosaminoglycans in the synovial fluid and joint disorders, age, and body weight. The samples of synovial fluid were obtained from dogs suffering from secondary secondary osteoarthritis (n = 35) and from control dogs (n = 18); control dogs had normal body weight. The results were compared among joints of dogs with secondary osteoarthritis divided into groups according to the criteria mentioned above and control dogs. Glycosaminoglycan concentrations in synovial fluid were measured using dimethylmethylene blue assay. The lowest mean value of glycosaminoglycans in synovial fluid was measured in the control group. Significantly higher glycosaminoglycan content (P < 0.05) was found in synovial fluid isolated from obese dogs compared to control dogs. Furthermore, we observed an age-related trend, in which the highest mean values were reached either in old dogs or pups. Despite the absence of significant differences in glycosaminoglycan values among dogs suffering from various types of secondary secondary osteoarthritis, the highest mean values were measured in fragmented coronoid processus group. Our data suggest that abnormally increased body weight has an impact on glycosaminoglycan concentration in synovial fluid which may imply faster degradation and turnover of joint cartilage. Such observation has not yet been published in veterinary medicine.

scholarly journals Effect of Grinding and Subsequent Various Surface Treatments on the Surface Roughness of Full Contour Monolithic Zirconia

2021 ◽  
Vol 10 (32) ◽  
pp. 2624-2628
Author(s):  
Surya Teja ◽  
Sanath Kumar Shetty ◽  
Mohammed Mohammed ◽  
Karkala Syed ◽  
Uma Mayoor ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Surface Treatments ◽  
Control Group ◽  
Dental Procedures ◽  
Significant Difference ◽  
Monolithic Zirconia ◽  
Spss Software ◽  
Natural Dentition ◽  
Post Hoc ◽  
Control Group Group

BACKGROUND A smooth zirconia surface is necessary to protect the opposing natural dentition, to prevent plaque accumulation and to increase the survival rate of restoration by reducing the chances of failure by crack propagation. Surface roughness can be incorporated by routine dental procedures done in labs and clinics to adjust the restoration. It is unclear which surface treatment is most appropriate to achieve clinically acceptable zirconia surface. The purpose of this study was to evaluate the effect of grinding and subsequent various surface treatments on the surface roughness of full contour monolithic zirconia. METHODS In this invitro study 10 zirconia bars of final dimensions 20 x 4 x 2 mm & 40 zirconia bars of final dimensions 20 x 4 x 2.2 mm were milled and sintered. The zirconia bars with final dimensions 20 x 4 x 2mm were glazed and selected as samples for control group (Group C) (n = 10). Forty zirconia bars with dimensions of 20 x 4 x 2.2 mm were grounded using a standard straight cylindrical diamond point (105 – 125 µm) by placing them in a customized grinding apparatus till the dimensions became similar to that of control group i.e. 20 x 4 x 2 mm. After grinding and confirming the dimensions of each full contour monolithic zirconia bar using digital vernier caliper, zirconia bars were randomly allocated into 4 groups with 10 samples in each group (n = 10), namely (Group G: Grinding only, Group G+R: Grinding & Reheating, Group G+G: Grinding & Glazing, Group G+P: Grinding & Polishing) respectively. Surface roughness values were measured using a profilometer. Differences between groups were examined using one-way analysis of variance (ANOVA) (P ≤ 0.05) and Post hoc Tukey HSD test was done for multiple comparisons of surface roughness in between the groups using Statistical Package for Social Sciences (SPSS) software. RESULTS Group C showed the least surface roughness values. The maximum surface roughness values were seen in Group G. Surface roughness of Group G, Group G + H and Group G + G were statistically significant from Group C and Group G + P. There was no statistically significant difference in surface roughness values between Group C and Group G + P. CONCLUSIONS It can be concluded that polishing after grinding significantly reduced the surface roughness and re-established the surface smoothness of full-contour monolithic zirconia bars. KEY WORDS Surface Roughness, Zirconia, Monolithic, Full Contour, Profilometer

scholarly journals The effect of polyamide microparticles addition on some mechanical prop-erties of light-cured acrylic resin

2019 ◽  
Vol 10 (2) ◽  
pp. 1464-1469
Author(s):  
Adnan R. Al Assal ◽  
Abdalbaset A Fatalla ◽  
Mohammed Moudhaffar ◽  
Ghasak H Jani
Keyword(s):  
Tensile Strength ◽  
Impact Strength ◽  
Base Material ◽  
Acrylic Resin ◽  
Strength Test ◽  
Control Group ◽  
Denture Base ◽  
Mean Values ◽  
Transverse Strength ◽  
Transverse Tensile

The general upgrading of polymer denture base material and research continuously looking for ideal restorative dental material with better properties, adequate esthetic properties, less expensive and easier to handle material to develop photo polymerization dental materials. This study was conducted to evaluate the effect of addition polyamide on mechanical microparticle properties light cure denture base material. One hindered sixty specimens from light-cured acrylic resin (Aurora). The divided mainly into four groups according to test used (Transverse strength test, impact strength test, hardness test and tensile strength test) with 40 specimens for each group. The results show an increase in Transverse strength, impact strength, hardness and tensile strength in all experimental group when compared to control group the highest mean values for all tests included in the study appeared in group B 1% polyamide. The addition of polyamide microparticle improves transverse, tensile, impact strength and hardness properties of denture base material.

scholarly journals Impact of Two Remineralizing Agents on White Spot Lesions

2020 ◽  
Author(s):  
Ebaa Ibrahim Alagha
Keyword(s):  
Mean Value ◽  
White Spot ◽  
Control Group ◽  
Main Concern ◽  
White Spot Lesions ◽  
Mean Values ◽  
Restorative Treatment ◽  
Significant Difference ◽  
Group B ◽  
The Impact

Abstract Aim of the study: This study evaluated the impact of two remineralizing agents containing casein phosphopeptideamorphous calcium phosphate (CPPACP), and Tricalcium phosphate (TCP) on white spot lesions. Materials and Methods: A total of ninety freshly extracted upper premolars were divided in three equal groups (30 each). Group A: Control group. Group B: Varnish containing CPP–ACP. Group C: Varnish containing TCP. The teeth were subjected to Diagnodent test after inducing white spot lesions to assess any surface changes present on the teeth. The readings were repeated post demineralization and post-remineralization. Results: Statistically significant difference was present in the mean values between the tested groups. CPP-ACP group recorded higher mean value at demineralization when compared to TCP group. Statistically significant difference (p < 0.0001) was present between the baseline and the demineralization values. CPP-ACP group presented higher remineralization results when compared to TCP group. T-test proved a significant difference between the tested groups. Conclusion: CPP-ACP containing varnish had higher remineralizing effect when compared to TCP containing varnish. Clinical Significance: Recently, the focus of restorative dentistry has been directed toward a conservative approach. Prevention and non-restorative treatment of initial enamel caries is the main concern. Remineralization procedures are the most preferred way of regeneration of lost tooth structure.

Sign in / Sign up

Export Citation Format

Share Document