scholarly journals AVAILABILITY AND COMPARISON OF DATA FROM SENTINEL-1 SATELLITES IN AREAS OF INTEREST IN THE CZECH REPUBLIC AND SUDAN

2021 ◽  
Vol 30 (4) ◽  
Author(s):  
Dominik Brétt
Keyword(s):  
Czech Republic ◽  
Home Environment ◽  
Point Of View ◽  
The Czech Republic ◽  
Processing Data ◽  
Surface Models ◽  
Elevation Model ◽  
Areas Of Interest ◽  
Subsequent Comparison ◽  
Rich History

The article is focused on the methodology of processing interferometric images and associated challenges with the processing. The article also contains useful links with explanations that can be used for processing data from the Sentinel-1 satellite. To emphasize the data limits of Sentinel-1, several areas of interest were chosen for comparison – in the home environment of the Czech Republic, the Bílina quarry area, and the Žatec area were selected. For subsequent comparison, arid areas with a rich history located in Sudan were selected. The colleagues of the author from the Faculty of The Environment of Jan Evangelista Purkyně University participate in expeditions there. Each of these locations is limited by different parameters – the areas in the Czech Republic are mainly limited by location because of occurring vegetation. Sudan's regions, on the other hand, are arid but are limited by insufficient coverage by capturing the Sentinel-1 satellite. To create digital height models from Sentinel-1 satellite data, it is necessary to search for data with sufficient coherence of images, and parameters of the amount of vegetation with a period between individual images play an important role. The areas were compared with each other and with the commonly available SRTM elevation model, both from a visual point of view – where digital height models and shaded surface models were created, as well as statistically using RMSE.

scholarly journals ANALYSIS OF INFLUENCE OF TERRAIN RELIEF ROUGHNESS ON DEM ACCURACY GENERATED FROM LIDAR IN THE CZECH REPUBLIC TERRITORY

2016 ◽  
Vol XLI-B4 ◽  
pp. 25-30 ◽  
Author(s):  
M. Hubacek ◽  
V. Kovarik ◽  
V. Kratochvil
Keyword(s):  
Czech Republic ◽  
Laser Scanning ◽  
Vegetation Coverage ◽  
The Czech Republic ◽  
Digital Elevation ◽  
Lower Accuracy ◽  
Check Points ◽  
Elevation Data ◽  
Dem Accuracy ◽  
Elevation Model

Digital elevation models are today a common part of geographic information systems and derived applications. The way of their creation is varied. It depends on the extent of area, required accuracy, delivery time, financial resources and technologies available. The first model covering the whole territory of the Czech Republic was created already in the early 1980's. Currently, the 5th DEM generation is being finished. Data collection for this model was realized using the airborne laser scanning which allowed creating the DEM of a new generation having the precision up to a decimetre. Model of such a precision expands the possibilities of employing the DEM and it also offers new opportunities for the use of elevation data especially in a domain of modelling the phenomena dependent on highly accurate data. The examples are precise modelling of hydrological phenomena, studying micro-relief objects, modelling the vehicle movement, detecting and describing historical changes of a landscape, designing constructions etc. <br><br> Due to a nature of the technology used for collecting data and generating DEM, it is assumed that the resulting model achieves lower accuracy in areas covered by vegetation and in built-up areas. Therefore the verification of model accuracy was carried out in five selected areas in Moravia. The network of check points was established using a total station in each area. To determine the reference heights of check points, the known geodetic points whose heights were defined using levelling were used. Up to several thousands of points were surveyed in each area. Individual points were selected according to a different configuration of relief, different surface types, and different vegetation coverage. The sets of deviations were obtained by comparing the DEM 5G heights with reference heights which was followed by verification of tested elevation model. Results of the analysis showed that the model reaches generally higher precision than the declared one in majority of areas. This applies in particular to areas covered by vegetation. By contrast, the larger deviations occurred in relation to the slope of the terrain, in particular in the micro-relief objects. The results are presented in this article.

Protistátní trestné činy v moderních kodifikacích

2021 ◽  
Author(s):  
David Kolumber
Keyword(s):  
Czech Republic ◽  
Soviet Union ◽  
Point Of View ◽  
The Other ◽  
The Czech Republic ◽  
Other Hand ◽  
Legal Concepts ◽  
Atlantic Area ◽  
Current Arrangement

The contribution “Anti-state Crimes in Modern Codifications” deals with the topic of anti-state crimes during centuries. Firstly, legal concepts in the pre-state period are mentioned. Then the attention is paid on the evolution of this institute in the Euro-Atlantic area. From this point of view, there are mentioned mainly regulations from England (1351), France (1810), Germany (1871) and Soviet Union (1958) which could be remarked as the most important for the development of other countries. On the other hand, it also reminds the development of codifications in Czechoslovakia, the Czech Republic and Slovakia, which were affected by the Austro-Hungarian legislations as well as German and Soviet approaches. The Czech current arrangement generally does not depart from the other European samples, but it cannot be omitted that in the Czech Republic it is distinguished the penal concept of the high treason (Landesverrat, vlastizrada) from the constitutional concept (Hochverrat, velezrada) which is dedicated to the presidential anti-state activities. The contribution also indicates that the concept of anti-state crimes in countries has not been unified and it has been varying according to various experiences and attitudes.

Situation of brownfields in selected regions in the Czech Republic

2021 ◽  
Author(s):  
Jaroslav Škrabal ◽  
Petra Chmielová
Keyword(s):  
Czech Republic ◽  
Point Of View ◽  
National Database ◽  
Agricultural Activities ◽  
The South ◽  
The Czech Republic ◽  
Industrial Activities ◽  
The Given ◽  
Geographical Point

The aim of the article is to make a comparison of brownfields in the South Moravian, Olomouc, Zlín and Moravian-Silesian regions based on the spatial standpoint. Data on brownfields were obtained through the National Database of Brownfields, which is managed by the CzechInvest agency. Information about these abandoned buildings and grounds were dated on 31st March 2021. The finding of the contribution is the fact that the most abandoned buildings and areas are mainly in Moravian-Silesian and South Moravian Region. Most of brownfields are after industrial activities, civic amenities and agricultural activities. In the given article, the analysis of brownfields according to individual indicators was performed on the basis of spatial and geographical point of view. It was found that most of the examined abandoned buildings and areas are located mainly in cities, which were followed by municipalities. Furthermore, it was proved that the size of brownfields from 54% is in area up to 1 (ha). The following indicator was the distance of abandoned buildings and areas from the centre of the cadastral area. Based on the results, it was found that 45% of the analysed brownfields are located 1-3 km from the centre of the cadastral area.

Electricity supplier selection by a household in the Czech Republic in 2017 and 2018 – Monte Carlo simulation approach

2019 ◽  
Author(s):  
Martina Kuncova
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Czech Republic ◽  
Electricity Market ◽  
Electricity Consumption ◽  
Point Of View ◽  
The Czech Republic ◽  
Extra Effort ◽  
The Individual ◽  
Monte Carlo Simulation Model

The situation on the electricity retail market in the Czech Republic is not clear because of the number of suppliers and its products. Although the information about the prices for the electricity consumption for households is available on the web and each household can change the supplier nearly with no extra effort and cost, households are still often not familiar with the individual price items of the products. In this article the analysis of the Czech electricity market from the distribution rate D25d point of view is made for the years 2017-2018 when the household annual consumption is simulated via Monte Carlo simulation model. The aim of this paper is to select such a supplier and product that minimizes the total costs of the electricity for a household for the selected distribution rate and compare it with the results from the previous years.

scholarly journals Bird mortality on medium-voltage power lines in the Czech Republic

2019 ◽  
Vol 13 (1) ◽  
pp. 27-44
Author(s):  
Vlasta Škorpíková ◽  
Václav Hlaváč ◽  
Milan Křápek
Keyword(s):  
Czech Republic ◽  
Point Of View ◽  
The Other ◽  
Power Lines ◽  
Mitigation Measures ◽  
Birds Of Prey ◽  
The Czech Republic ◽  
Medium Voltage ◽  
Bird Mortality ◽  
Straight Lines

Abstract In 2015–2016, 6,429 km medium-voltage power lines with 76,430 pylons were checked for bird mortality in the Czech Republic. 1,326 bird victims of power lines were found, 156 of which died after collisions, and 1,170 birds were electrocuted. They belonged to 60 species from 12 orders, and birds of prey made up almost half of all victims. Steel pylons bearing several cross-arms including upper and crosswise jumpers were identified as most dangerous from the electrocution point of view. On the other hand, pylons in straight lines with Pařát cross-arms (triangular arrangement of conductors without any horizontal bar) were among the least dangerous, and when they had a simple perch fitted below the cross-arm, no mortality was recorded. But these pylons are new in practice and despite becoming widely used recently, they form less than one tenth of all pylons in the Czech Republic. On other pylons various types of mitigation measures have been installed. Commonly used plastic covers and plastic strips have proved to be especially effective, but only in cases when they are undamaged and correctly installed.

scholarly journals Do Sociodemographic Characteristics in Waste Management Matter? Case Study of Recyclable Generation in the Czech Republic

2019 ◽  
Vol 11 (7) ◽  
pp. 2030 ◽  
Author(s):  
Kristyna Rybova
Keyword(s):  
Czech Republic ◽  
Social Life ◽  
Developed Countries ◽  
Individual Characteristics ◽  
Point Of View ◽  
Situational Factors ◽  
Sociodemographic Characteristics ◽  
Spatial Effects ◽  
Waste Generation ◽  
The Czech Republic

The generation of recyclables in the Czech Republic has long been under the European average, but the proportion from municipal waste as a whole has been growing over the past few years. Previous research in the Czech Republic mainly focused on organizational or situational factors explaining recycling performance in municipalities. This study focuses on individual characteristics that are connected, among other things, to ongoing demographic changes. Currently ongoing sociodemographic development in the Czech Republic, as well as other developed countries, influence a broad range of aspects of social life, including waste generation and its structure. This paper aims at quantifying the relation between the sociodemographic characteristics of municipality inhabitants and recyclable generation. For this purpose, 13 variables describing inhabitants, households, and housing in 4897 Czech municipalities were selected that could influence the generation of recyclables according to foreign studies. Data were analyzed using multidimensional linear regression. Even though the resulting model only explains 9%, it is statistically significant and implies that sociodemographic variables can help explain recyclable generation. From this point of view, important variables are average household size, share of tertiary educated people, share of family houses, purchasing power per person, percentage of people employed in agriculture, and sex ratio. To increase the explained variability and emphasize local differences in recyclable generation, we also used geographically weighted regression (GWR). GWR results show that, to understand waste generation (at least in the Czech Republic) on a municipal level, it is necessary to also consider spatial effects and regional specifics.

scholarly journals Application of Mg-fertilizers to prevent and to decrease Norway spruce yellowing

2019 ◽  
Vol 51 (Special Issue) ◽  
pp. 43-48 ◽  
Author(s):  
V.V. Podrázský ◽  
S. Vacek ◽  
J. Remeš ◽  
I. Ulbrichová
Keyword(s):  
Czech Republic ◽  
Norway Spruce ◽  
Forest Decline ◽  
Forest Stand ◽  
Considerable Improvement ◽  
Air Pollutant ◽  
Ecological Analysis ◽  
The Czech Republic ◽  
Stand Management ◽  
Areas Of Interest

Yellowing of the Norway spruce is a relatively common problem in many areas of the Czech Republic. In some of them, it is also connected with forest decline; it was studied in the Šumava (Bohemian Forest) Mts. and in the western part of the Krušné hory Mts. This unfavourable phenomenon is initiated by several ecological as well as anthropic processes, one of the most important being the imbalance of forest stand nutrition. Particular reasons lead to the deficiency of nutrients, especially of magnesium. Solution of this undesirable trend is the profound ecological analysis and cause-oriented treatments. Besides lowering the air pollutant input, fertilization with deficient nutrients is a successful treatment in the forest stand management in affected areas. In the areas of interest, the application of a relatively small amount of appropriate fertilizer (SILVAMIX Mg) led to considerable improvement in the defoliation dynamics and yellowing progress since the first years after use.

COMPARISON OF POLISH, CZECH AND SLOVAK SKI RESORTS USING THE FREE DISPOSABLE HULL ANALYSIS

2017 ◽  
Vol 45 ◽  
pp. 11-31
Author(s):  
Marek Nowacki
Keyword(s):  
Czech Republic ◽  
Quality Index ◽  
Principal Component ◽  
Nonparametric Test ◽  
Point Of View ◽  
Web Pages ◽  
Value For Money ◽  
The Czech Republic ◽  
Ski Resorts ◽  
The Impact

Purpose. The aim of this study is: (1) to compare the features of ski resorts in Poland, the Czech Republic and Slovakia in relation to the prices of ski passes, (2) to indicate the best ski resorts in these countries in terms of value for money - the ratio of offered quality to the price of ski passes, (3) to compare of differences in value for money (e.g. offered quality compared to the price of a ski pass) in these countries. Method. Data for analysis were features of quality and prices of one-day ski passes for 245 ski resorts in Poland, the Czech Republic and Slovakia. The data was obtained from the websites of the surveyed ski resorts and web pages: skiinfo.pl, holidayinfo.cz and holidayinfo.sk. The quality index of ski resorts was constructed using Principal Component Analysis of the seventeen quality features regarding the studied resorts. The comparison of ski resorts was conducted using the Free Disposable Hull analysis. Differences in the level of quality of the resorts' and ski pass prices were calculated using the Kruskal-Wallis H nonparametric test. Findings. Eleven features of the eighteen surveyed locations were differentiated between surveyed countries (including the price of the ski pass: Polish ski passes are the most expensive and the cheapest are in Slovakia). The FDH analysis revealed the existence of eight effective – from the skiers' point of view – ski resorts, i.e. those that offer the given quality at the lowest price (value for money). Polish ski resorts are characterized by significantly higher quality than Czech or Slovak resorts. Research and conclusion limitations. The analysis did not take the impact that congestion and queues to lifts, prices of accommodation, restaurants and nightlife in the resort (except night skiing) might have had on the skiers decision into account. The results may also be influenced by the method of quality index construction. Practical implications. The results of FDH analysis enable the identification of inefficient ski resorts in the analysed countries and indication of the differences existing in terms of quality between ski resorts. The conclusions allow to select the most efficient ski resorts which can be helpful in the design of tourist offers and it may also indicate the need for adjustments in prices of ski passes at some ski resorts. Originality. No comparative analyses of Polish, Czech and Slovak ski resorts were found in the literature to date. Type of paper. The article presents the results of empirical research.

scholarly journals Convergence processes of selected demographic indicators in regions of the Czech Republic

2010 ◽  
Vol 58 (3) ◽  
pp. 137-144
Author(s):  
Bohumil Minařík ◽  
Jaroslav Dufek ◽  
Zlata Sojková
Keyword(s):  
Czech Republic ◽  
Demographic Data ◽  
Point Of View ◽  
Capital City ◽  
Demographic Development ◽  
Original Result ◽  
The Czech Republic ◽  
Demographic Indicators ◽  
Sigma Convergence ◽  
Opposite Situation

A number of authors deal with problems of convergence, divergence and disparities, particularly with reference to economic growth and its comparison in groups of countries. This paper is aimed at problems of using basic methods of measuring the convergence at the evaluation of the development of selected demographic characteristics of particular regions of the Czech Republic for the period 1992 to 2007. From demographic data provided by the Czech Statistical Office some indicators were selected associated with aging the CR population. In particular, following indicators were used: the proportion of productive population, coefficient of loading the productive population by young persons, coefficient of loading the productive population by old persons, coefficient of the total loading and index of age. A precondition served as a working hypothesis that in addition to the negative demographic development affecting the CR as a whole, the convergence of its particular regions also occurred, viz. regions at the level of NUTS 3. At the quantification of convergence processes in particular regions of the CR, the method of beta convergence was used (in a simplified linearized form) as well as the method of sigma convergence. Both methods predicate unambiguously on the convergence of the CR regions from the point of view of all examined demographic indicators. From the aspect of both methods, the fastest convergence occurred in the studied period in the indicator of loading the productive population by old persons. In this indicator (as the only from monitored ones), no disparity showed as well, ie a region showing an isolated development was not noted. Opposite situation manifested itself at the indicator of loading the productive population by young persons. Only elimination of the capital city of Prague reversed an original result showing evidence of the divergence of regions from the aspect of this indicator. Disparities of the capital city of Prague occurred even at other two indicators. Only from the aspect of age, the Central Bohemian region became a region being beside the general trend of convergence.

scholarly journals Using Business Information Systems available in the Czech Republic for Marketing Strategies Support

2005 ◽  
Vol 53 (6) ◽  
pp. 203-214 ◽  
Author(s):  
František Dařena
Keyword(s):  
Czech Republic ◽  
Information Systems ◽  
Marketing Strategies ◽  
Point Of View ◽  
The Czech Republic ◽  
Business Information Systems ◽  
Business Information ◽  
Three Layer Architecture ◽  
Angle Of View ◽  
Marketing Information

The paper deals with the analysis of current situation on the market of business information systems in the Czech Republic from the point of view of their utilization in marketing strategies creation. Based on requirements on marketing information system the structure of these systems and possibilities of their usage are evaluated. It is also pointed out to discovered insufficiencies and the architecture solving these problems is suggested. The main angle of view is three-layer architecture and on each layer the set of requirements and design proposal are summarized.

Sign in / Sign up

Export Citation Format

Share Document