Dextran nanofiber production by needleless electrospinning process

e-Polymers ◽  
2014 ◽  
Vol 14 (1) ◽  
pp. 5-13 ◽  
Author(s):  
Funda Cengiz-Çallıoğlu
Keyword(s):  
Surfactant Concentration ◽  
Water Solution ◽  
Electrospinning Process ◽  
Optimum Process ◽  
Fiber Density ◽  
Uniformity Coefficient ◽  
High Fiber ◽  
Fiber Properties ◽  
Needleless Electrospinning ◽  
Electrospinning Method

AbstractThis article presents the formation of a dextran nanofibrous layer by needleless electrospinning. Optimum process parameters such as polymer solution and addition (surfactant) concentration, voltage, distance, etc. were determined to obtain uniform and smooth dextran nanofibers. It was not possible to produce nanofibers from pure dextran/water solution. Instead, solution drops were deposited on the collector; therefore, anionic surfactant was added in various concentrations to start the nanofiber production. Also, the effects of surfactant concentration on the solution properties, spinnability and fiber properties were determined. Generally, uniform and fine nanofibers were obtained from the rod electrospinning method. The value of 2 wt% surfactant concentration was chosen as the optimum concentration to produce a dextran nanofibrous layer by roller electrospinning. According to the results, spinning performance was 0.6726 g/min per meter, average fiber diameter was 162 nm, diameter uniformity coefficient was 1.03 and the nonfibrous area was 0.5%. In conclusion, this methodology resulted in the production of good product properties such as good spinnability, fine and uniform nanofibers and high fiber density.

Fundamental Study on Needleless Electrospinning Based on Metal (Card) Clothing

2013 ◽  
Vol 662 ◽  
pp. 103-107
Author(s):  
Yan Bo Liu ◽  
Ze Ru Zhang ◽  
Peng Cheng Li ◽  
Velmurugan Thavasi
Keyword(s):  
Theoretical Analysis ◽  
Polyvinyl Alcohol ◽  
Scaling Up ◽  
Electrospinning Process ◽  
Experimental Results ◽  
Fundamental Study ◽  
Needleless Electrospinning ◽  
Electrospinning Method ◽  
New Process ◽  
Different Types

This paper discloses a method for producing nanofibers by a needleless electrospinning process based on the metal (card) clothing. 20% w/w polyvinyl alcohol (PVA) solution was employed to demonstrate the feasibility of this new electrospinning technology. Different types of metal clothing were used to produce PVA nanofibers under different voltages in the experiments; theoretical analysis of this new electrospinning method was also carried out to understand the experimental results. The results indicated the great potential for scaling up this new avenue for producing nanofibers through electrospinning, especially when medium sized clothing was used in the new process.

scholarly journals Upward Needleless Electrospinning of Nanofibers

2012 ◽  
Vol 7 (2_suppl) ◽  
pp. 155892501200702 ◽  
Author(s):  
Haitao Niu ◽  
Xungai Wang ◽  
Tong Lin
Keyword(s):  
Electric Field ◽  
High Intensity ◽  
Electrospinning Process ◽  
Fiber Formation ◽  
Diameter Distribution ◽  
Fiber Morphology ◽  
Wire Surface ◽  
Elementary Method ◽  
Needleless Electrospinning ◽  
Electrospinning Method

Polyacrylonitrile (PAN) nanofibers were prepared by a needleless electrospinning method using three rotating fiber generators, cylinder, disc and coil. The effects of the spinneret shape on the electrospinning process and resultant fiber morphology were examined. The disc spinneret needed the lowest voltage to initiate fiber formation, followed by the coil and cylinder. Compared to cylinder, the disc and coil produced finer fibers with narrower diameter distribution. The productivity of a coil was 23 g/hr, which was much larger than that of the cylinder spinneret having the same length and diameter. Finite elementary method was used to analyze the electric field. Stronger electric field was found to be formed on disc and coil surface, which concentrated on the disc circumferential edge and coil wire surface, respectively. For cylinder, the high intensity electric field was mainly concentrated on the end area. Concentrated electric field on the fiber generating surface could be used to explain the better electrospinning performance of coil, which may form a new concept for designing needleless electrospinning spinnerets.

scholarly journals PARACETAMOL DRUG LOADED MICROCAPSULE BASED NANOFIBER PRODUCTION

2021 ◽  
Vol 2021 ◽  
pp. 200-207
Author(s):  
İ.Y. Mol ◽  
F.C. Çallıoğlu ◽  
H.K. Güler ◽  
M. Geysoğlu
Keyword(s):  
Surface Tension ◽  
Fibre Diameter ◽  
Controlled Drug Release ◽  
Electrospinning Process ◽  
Core Material ◽  
Optimum Process ◽  
Sem Images ◽  
Eudragit Rs ◽  
Uniformity Coefficient ◽  
Average Fibre Diameter

In this study, it was aimed to production and characterization of paracetamol (PCT) loaded microcapsules and microcapsule added electro spun PVA nanofibers. Eudragit RS 100 and PVA were used as the shell in the microcapsule structure, and PCT was used as the core material. First of all, the PCT loaded Eudragit RS 100/PVA microcapsules were produced by solvent evaporation method under the optimum process parameters. Then, properties such as conductivity, viscosity and surface tension of the microcapsule loaded PVA solution were measured and the effects of microcapsule concentration on the solution properties were determined. According to the solution results, while the viscosity increased with the microcapsule concentration, conductivity and surface tension did not change significantly except for the PVA-10 sample. After the electrospinning process, fibre morphology was determined by SEM and incorporation of microcapsules into the nanofibers was clearly demonstrated. It was calculated from the SEM images that average microcapsule size is 9.81μm, average fibre diameter is 550 nm and fibre diameter uniformity coefficient is 1.025. Finally, the incorporation of PCT loaded microcapsules into the nanofibers was chemically confirmed by FT-IR analysis. It is thought that the results of this study will be useful for controlled drug release, especially in medical textiles.

Effect of Solution Properties and Operating Parameters on Needleless Electrospinning of Poly(Ethylene Oxide) Nanofibers Loaded with Bovine Serum Albumin

2019 ◽  
Vol 16 (10) ◽  
pp. 913-922 ◽  
Author(s):  
Ramprasath Ramakrishnan ◽  
Jolius Gimbun ◽  
Praveen Ramakrishnan ◽  
Balu Ranganathan ◽  
Samala Murali Mohan Reddy ◽  
...  
Keyword(s):  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Bovine Serum ◽  
Salt Content ◽  
Electrospinning Process ◽  
Solution Viscosity ◽  
Operating Parameters ◽  
Solution Properties ◽  
Wire Electrode ◽  
Needleless Electrospinning

Background: This paper presents the effect of solution properties and operating parameters of polyethylene oxide (PEO) based nanofiber using a wire electrode-based needleless electrospinning. Methods: The feed solution was prepared using a PEO dissolved in water or a water-ethanol mixture. The PEO solution is blended with Bovine Serum Albumin protein (BSA) as a model drug to study the effect of the electrospinning process on the stability of the loaded protein. The polymer solution properties such as viscosity, surface tension, and conductivity were controlled by adjusting the solvent and salt content. The morphology and fiber size distribution of the nanofiber was analyzed using scanning electron microscopy. Results: The results show that the issue of a beaded nanofiber can be eliminated either by increasing the solution viscosity or by the addition of salt and ethanol to the PEO-water system. The addition of salt and solvent produced a high frequency of smaller fiber diameter ranging from 100 to 150 nm. The encapsulation of BSA in PEO nanofiber was characterized by three different spectroscopy techniques (i.e. circular dichroism, Fourier transform infrared, and fluorescence) and the results showed the BSA is well encapsulated in the PEO matrix with no changes in the protein structure. Conclusion: This work may serve as a useful guide for a drug delivery industry to process a nanofiber at a large and continuous scale with a blend of drugs in nanofiber using a wire electrode electrospinning.

scholarly journals Electrospun Nylon-6 Nanofibers and Their Characteristics

2020 ◽  
Vol 9 (1) ◽  
pp. 9-19
Author(s):  
Ida Sriyanti ◽  
Meily P Agustini ◽  
Jaidan Jauhari ◽  
Sukemi Sukemi ◽  
Zainuddin Nawawi
Keyword(s):  
Fiber Diameter ◽  
Peak Shift ◽  
Nylon 6 ◽  
Electrospinning Process ◽  
Electrospinning Technique ◽  
Fiber Concentration ◽  
Air Filters ◽  
Xrd Pattern ◽  
Electrospinning Method ◽  
Small Wave

The purposes of this research were to investigate the synthesized Nylon-6 nanofibers using electrospinning technique and their characteristics. The method used in this study was an experimental method with a quantitative approach. Nylon-6 nanofibers have been produced using the electrospinning method. This fiber was made with different concentrations, i.e. 20% w/w (FN1), 25% w/w (FN2), and 30% w/w (FN3). The SEM results show that the morphology of all nylon-6 nanofibers) forms perfect fibers without bead fiber. Increasing fiber concentration from 20% w/w to 30% w/w results in bigger morphology and fiber diameter. The dimensions of the FN1, FN2, and FN3 fibers are 1890 nm, 2350 nm, and 2420 nm, respectively. The results of FTIR analysis showed that the increase in the concentration of nylon-6 (b) and the electrospinning process caused a peak shift in the amide II group (CH2 bond), the carbonyl group and the CH2 stretching of the amide III group from small wave numbers to larger ones. The results of XRD characterization showed that the electrospinning process affected the changes in the XRD pattern of nylon-6 nanofiber (FN1, FN2, and FN3) in the state of semi crystal. Nylon-6 nanofibers can be used for applications in medicine, air filters, and electrode for capacitors

scholarly journals Nanostructured Fibers Containing Natural or Synthetic Bioactive Compounds in Wound Dressing Applications

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2407 ◽  
Author(s):  
Alexa-Maria Croitoru ◽  
Denisa Ficai ◽  
Anton Ficai ◽  
Natalia Mihailescu ◽  
Ecaterina Andronescu ◽  
...  
Keyword(s):  
Wound Healing ◽  
Healing Process ◽  
Electrospun Nanofibers ◽  
Natural Compounds ◽  
Electrospinning Process ◽  
Wound Dressings ◽  
Wound Healing Process ◽  
Skin Substitutes ◽  
Bioactive Constituents ◽  
Electrospinning Method

The interest in wound healing characteristics of bioactive constituents and therapeutic agents, especially natural compounds, is increasing because of their therapeutic properties, cost-effectiveness, and few adverse effects. Lately, nanocarriers as a drug delivery system have been actively investigated and applied in medical and therapeutic applications. In recent decades, researchers have investigated the incorporation of natural or synthetic substances into novel bioactive electrospun nanofibrous architectures produced by the electrospinning method for skin substitutes. Therefore, the development of nanotechnology in the area of dressings that could provide higher performance and a synergistic effect for wound healing is needed. Natural compounds with antimicrobial, antibacterial, and anti-inflammatory activity in combination with nanostructured fibers represent a future approach due to the increased wound healing process and regeneration of the lost tissue. This paper presents different approaches in producing electrospun nanofibers, highlighting the electrospinning process used in fabricating innovative wound dressings that are able to release natural and/or synthetic substances in a controlled way, thus enhancing the healing process.

scholarly journals Fiber Generators in Needleless Electrospinning

2012 ◽  
Vol 2012 ◽  
pp. 1-13 ◽  
Author(s):  
Haitao Niu ◽  
Tong Lin
Keyword(s):  
Production Rate ◽  
Scale Up ◽  
Electrospun Nanofibers ◽  
Scaling Up ◽  
Electrospinning Process ◽  
Recent Advances ◽  
Needleless Electrospinning ◽  
Application Potential

The conventional electrospinning often uses a needle-like nozzle to produce nanofibers with a very low production rate. Despite the enormous application potential, needle electrospun nanofibers meet difficulties in broad applications in practice, due to the lack of an economic and efficient way to scale up the electrospinning process. Recently, needleless electrospinning has emerged as a new electrospinning mode and shown ability to produce nanofibers on large-scales. It has been established that the fiber generator, also referred to as “spinneret” in this paper, in needleless electrospinning plays a key role in scaling up the nanofiber production. This paper summarizes the recent advances in the development of needleless spinnerets and their influences on electrospinning process, nanofiber quality, and productivity.

scholarly journals TiO2 NPs Assembled into a Carbon Nanofiber Composite Electrode by a One-Step Electrospinning Process for Supercapacitor Applications

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 899 ◽  
Author(s):  
Bishweshwar Pant ◽  
Mira Park ◽  
Soo-Jin Park
Keyword(s):  
Electrode Material ◽  
Carbon Nanofiber ◽  
Titanium Dioxide Nanoparticles ◽  
Scale Up ◽  
Carbon Composite ◽  
Electrospinning Process ◽  
Tio2 Nps ◽  
Electrospinning Method ◽  
One Step ◽  
Supercapacitor Applications

In this study, we have synthesized titanium dioxide nanoparticles (TiO2 NPs) into carbon nanofiber (NFs) composites by a simple electrospinning method followed by subsequent thermal treatment. The resulting composite was characterized by state-of-the-art techniques and exploited as the electrode material for supercapacitor applications. The electrochemical behavior of the as-synthesized TiO2 NPs assembled into carbon nanofibers (TiO2-carbon NFs) was investigated and compared with pristine TiO2 NFs. The cyclic voltammetry and charge–discharge analysis of the composite revealed an enhancement in the performance of the composite compared to the bare TiO2 NFs. The as-obtained TiO2-carbon NF composite exhibited a specific capacitance of 106.57 F/g at a current density of 1 A/g and capacitance retention of about 84% after 2000 cycles. The results obtained from this study demonstrate that the prepared nanocomposite could be used as electrode material in a supercapacitor. Furthermore, this work provides an easy scale-up strategy to prepare highly efficient TiO2-carbon composite nanofibers.

scholarly journals Direct Deposition of Micron-Thick Aligned CeramicTiO2Nanofibrous Film on FTOs by Double-Needle Electrospinning Using Air-Turbulence Shielded Disc Collector

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
T. Krishnamoorthy ◽  
V. Thavasi ◽  
V. Akshara ◽  
A. Senthil Kumar ◽  
D. Pliszka ◽  
...  
Keyword(s):  
Tin Oxide ◽  
Electric Field Distribution ◽  
Electronic Devices ◽  
Electrospinning Process ◽  
Repulsive Force ◽  
Rotating Disc ◽  
One Dimensional ◽  
Air Turbulence ◽  
Electrospinning Method ◽  
Quantum Phenomena

One-dimensional (1D) metal oxides, typically nanowires and nanorods, have unique electronic and optical properties due to quantum phenomena that find applications in modern energy and electronic devices. We present here the electrospinning method that produces the aligned TiO2nanofibres directly on the fluorine-doped tin oxide (FTO) substrates mounted rotating disc collector. The aligned TiO2ceramic nanofibres mat of 6 μm thickness is achieved in 4 h using a nonconductive enclosed-air-shield with air-hood design over the FTO mounted rotating disc collector. The aligned TiO2nanofibers are found to retain its integrity and binding on FTO surface even after sintering at 500°C. SIMON 8 modeling package is used to determine the behaviour of the charged polymer/TiO2jet when single and double needles are used for electrospinning process. The simulation study reveals that the repulsive force of the charged fibers from the double needle exerts stronger electric field distribution along the flow of stream that results in the reduction of the fibers diameter, which is about 28 nm than that of using single-needle system.

scholarly journals Polyamic Acid Nanofibers Produced by Needleless Electrospinning

2010 ◽  
Vol 2010 ◽  
pp. 1-6 ◽  
Author(s):  
Oldrich Jirsak ◽  
Petr Sysel ◽  
Filip Sanetrnik ◽  
Jakub Hruza ◽  
Jiri Chaloupek
Keyword(s):  
Pressure Drop ◽  
Ir Spectroscopy ◽  
Polyamic Acid ◽  
Needleless Electrospinning ◽  
Electrospinning Method ◽  
Filtration Properties ◽  
To Receive ◽  
Polyimide Precursor ◽  
Oxydiphthalic Anhydride

The polyimide precursor (polyamic acid) produced of4,4′-oxydiphthalic anhydride and4,4′-oxydianiline was electrospun using needleless electrospinning method. Nonwoven layers consisting of submicron fibers with diameters in the range about 143–470 nm on the polypropylene spunbond supporting web were produced. Filtration properties of these nanofiber layers on the highly permeable polypropylene support—namely filtration effectivity and pressure drop—were evaluated. Consequently, these polyamic acid fibers were heated to receive polyimide nanofibers. The imidization process has been studied using IR spectroscopy. Some comparisons with the chemically identical polyimide prepared as the film were made.

Sign in / Sign up

Export Citation Format

Share Document