Cyclic voltammogram on ridge/pore array architectured electrode inspired by butterfly-wings

2015 ◽  
Vol 87 (8) ◽  
pp. 815-825 ◽  
Author(s):  
Xingmei Guo ◽  
Han Zhou ◽  
Di Zhang ◽  
Tongxiang Fan
Keyword(s):  
Electrode Materials ◽  
High Surface ◽  
High Surface Area ◽  
Lateral Diffusion ◽  
Cost Effective ◽  
Hierarchical Architecture ◽  
Cyclic Voltammogram ◽  
Peak Current Density ◽  
Porous Architecture ◽  
Butterfly Wings

AbstractPorous architectured electrodes are intensely investigated for promoting electrochemical performance. Besides the high surface area, mass transport plays an irreplaceable role in the architecture assisting effect, which is, however, far beyond expression due to the complexity and irregularity of various electrode materials. Here, we took advantage of elaborate architectures from butterfly wings and obtained carbon electrode with ridge/pore array hierarchical architecture (ridge/pore-C) using a carbonizing-graphite coating method. A basic one-electron transfer process using the redox couple ferri/ferrocyanide as a benchmark under cyclic voltammetric conditions was conducted. The peak potential separation for ridge/pore-C was decreased by 117 mV compared to its non-architectured counterpart, with obvious enhancement of peak current density, indicating prominent beneficial impact on electrochemical responses. Further finite element simulation demonstrated the additional lateral diffusion within the ridge domain and partial thin layer diffusion within the pore array domain of ridge/pore-C, and simultaneously verified the experimental results. By constructing and investigating the well-organized porous architecture for affecting cyclic voltammogram, this work provides a prototype and cost-effective method for structural design of efficient electrodes by drawing inspiration from nature.

scholarly journals Electrochemical Response of Glucose Oxidase Adsorbed on Laser-Induced Graphene

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1893
Author(s):  
Sónia O. Pereira ◽  
Nuno F. Santos ◽  
Alexandre F. Carvalho ◽  
António J. S. Fernandes ◽  
Florinda M. Costa
Keyword(s):  
Electron Transfer ◽  
Glucose Oxidase ◽  
Ph Dependence ◽  
High Surface ◽  
High Surface Area ◽  
Cost Effective ◽  
Great Promise ◽  
Glucose Detection ◽  
Half Wave ◽  
Electrochemical Transducers

Carbon-based electrodes have demonstrated great promise as electrochemical transducers in the development of biosensors. More recently, laser-induced graphene (LIG), a graphene derivative, appears as a great candidate due to its superior electron transfer characteristics, high surface area and simplicity in its synthesis. The continuous interest in the development of cost-effective, more stable and reliable biosensors for glucose detection make them the most studied and explored within the academic and industry community. In this work, the electrochemistry of glucose oxidase (GOx) adsorbed on LIG electrodes is studied in detail. In addition to the well-known electroactivity of free flavin adenine dinucleotide (FAD), the cofactor of GOx, at the expected half-wave potential of −0.490 V vs. Ag/AgCl (1 M KCl), a new well-defined redox pair at 0.155 V is observed and shown to be related to LIG/GOx interaction. A systematic study was undertaken in order to understand the origin of this activity, including scan rate and pH dependence, along with glucose detection tests. Two protons and two electrons are involved in this reaction, which is shown to be sensitive to the concentration of glucose, restraining its origin to the electron transfer from FAD in the active site of GOx to the electrode via direct or mediated by quinone derivatives acting as mediators.

Rich N/O/S co-doped porous carbon with a high surface area from silkworm cocoons for superior supercapacitors

2019 ◽  
Vol 43 (48) ◽  
pp. 19372-19378 ◽  
Author(s):  
Jianyu Huang ◽  
Simin Liu ◽  
Zifang Peng ◽  
Zhuoxian Shao ◽  
Yuanyuan Zhang ◽  
...  
Keyword(s):  
Surface Area ◽  
Porous Carbon ◽  
Electrode Materials ◽  
Synergistic Effects ◽  
High Surface ◽  
High Surface Area ◽  
Porous Carbons ◽  
Co Doped

The synergistic effects of high surface area and abundant heteroatoms make porous carbons superior electrode materials.

scholarly journals Synthesis of Hierarchical Graphene-MnO2 Nanowire Composites with Enhanced Specific Capacitance

2019 ◽  
Vol 31 (8) ◽  
pp. 1709-1718
Author(s):  
T. Veldevi ◽  
K. Thileep Kumar ◽  
R.A. Kalaivani ◽  
S. Raghu ◽  
A.M. Shanmugharaj
Keyword(s):  
Surface Area ◽  
Electrode Materials ◽  
High Surface ◽  
Specific Capacity ◽  
High Surface Area ◽  
Rate Capability ◽  
Sulfate Solution ◽  
High Rate ◽  
Chemical Compositions ◽  
Structure Morphology

Hierarchical nanostructured graphene–manganese dioxide nanowire (G-MnO2-NW) composites have been prepared by hydrothermal synthesis route using water/1-decanol as the medium. Synthesized materials were analyzed using various characterization tools to corroborate their chemical compositions, structure/morphology and surface area. Electrochemical measurements of the synthesized G-MnO2-NW electrode materials delivered the highest specific capacity (255 Fg-1), high rate capability and improved cycling stability at 0.5 Ag–1 in 1M sodium sulfate solution and this fact may be attributed to its high surface area and porosity. Moreover, synthesized G-MnO2-NW electrodes displayed better energy and power density, when compared to the MnO2-NW based electrodes.

Template-free synthesis of nanocage-like g-C3N4 with high surface area and nitrogen defects for enhanced photocatalytic H2 activity

2019 ◽  
Vol 7 (10) ◽  
pp. 5324-5332 ◽  
Author(s):  
Mao Wu ◽  
Yansheng Gong ◽  
Tao Nie ◽  
Jin Zhang ◽  
Rui Wang ◽  
...  
Keyword(s):  
Surface Area ◽  
Carbon Nitride ◽  
High Surface ◽  
High Surface Area ◽  
Cost Effective ◽  
Porous Graphitic Carbon ◽  
Graphitic Carbon ◽  
Graphitic Carbon Nitride ◽  
Template Free

Nanocage-like 3D porous graphitic carbon nitride (g-C3N4) with a high surface area and nitrogen defects was successfully prepared via a novel, template-free, cost-effective and hydrothermal-copolymerization route.

scholarly journals Poly (3, 4-ethylene dioxythiophene) Supported Palladium Catalyst prepared by Galvanic Replacement Reaction for Methanol Tolerant Oxygen Reduction

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Pandia Rajathi M ◽  
Sheela Berchmans
Keyword(s):  
Oxygen Reduction ◽  
Direct Methanol Fuel Cells ◽  
High Surface ◽  
High Surface Area ◽  
Cost Effective ◽  
Reduction Reaction ◽  
Partial Substitution ◽  
Galvanic Replacement ◽  
Potential Cycling ◽  
Electrochemical Approach

AbstractHerein, we propose a facile electrochemical approach for the synthesis of Pd loaded poly 3, 4-ethylenedioxythiophene (PEDOT) electrodeposited on glassy carbon electrode (GCE) resulting in high surface area. The catalyst preparation is initiated with EDOT polymerization on GCE surface by electrochemical potential cycling method, followed by the electrodeposition of Cu from a 2 mM solution of CuSO4 in 0.1 M NaClO4 at a constant potential of +0.34 V vs. SHE in the form of Cu nanocubes on the PEDOT surface. Pd-PEDOT catalyst was then prepared by the partial substitution of copper by galvanic displacement with various concentrations of PdCl2. The prepared Pd/PEDOT electrocatalyst is found to be methanol resistant indicating its usefulness as fuel cell cathode. The prepared catalyst supports two electron transfer of oxygen reduction reaction in 0.5 M H2SO4. The effects of Pd and Cu contents and the quantity of PEDOT, mass and specific activities were studied. At a relatively low Pd loading of 0.57 ng/cm2, the Pd/PEDOT should be a cost-effective alternative cathode catalyst for direct methanol fuel cells, DMFCs. This work explains the usefulness of PEDOT as good catalyst supporting material which is prepared by an eco-friendly electrochemical route.

scholarly journals Electro Spun- Nanofibrous Mats: A Modern Wound Dressing Matrix with a Potential of Drug Delivery and Therapeutics

2015 ◽  
Vol 10 (4) ◽  
pp. 155892501501000 ◽  
Author(s):  
Seham Abdelhady ◽  
Khaled M. Honsy ◽  
Mallesh Kurakula
Keyword(s):  
Healing Process ◽  
High Surface ◽  
High Surface Area ◽  
Electrospun Nanofibers ◽  
Cost Effective ◽  
External Agent ◽  
Masking Agents ◽  
Ordinary Time ◽  
Treatment Of Wounds ◽  
Chemical Materials

Nanofibers have emerged as advanced fibers with broad use and potential in biomedical fields in recent decades. The process of healing is an innate immune response towards a pathophysiology such as wound. Ordinary time taken for wound healing is approximately 2–3 days depending upon the chronic state. Air moisture and microbes risk pathological manifestations leading to delayed or incomplete palliate process. An external agent that can provide balanced moisture, increasing cell proliferation with microbial infiltration or anti- bacterial activity, aids to speed the healing process. Apart from these qualities, an ideal material should be simple, cost effective, and repeatable. Nanofibers produced through electrospinning have become a promising strategy in the treatment of wounds. Apart from being simple in application, they are produced from natural or synthetic polymers. Nanofibers exhibit high surface area, nanoporosity, with a potential to load potent drugs or enzymes. Other biomedical applications include use of nanofibers as tissue scaffolds and as masking agents in modern cosmetics. Therefore nanofibers are excellent candidates for wound treatment and management. The current review is an attempt to discuss and present literature about different techniques, chemical materials, and entities used to produce efficient electrospun nanofibers for use in pathological, medicinal, or treatment or management of injury or laceration.

scholarly journals Removal of lead ions from water by capacitive deionization electrode materials derived from chicken feathers

2019 ◽  
Vol 9 (3) ◽  
pp. 282-291 ◽  
Author(s):  
T. Alfredy ◽  
Y. A. C. Jande ◽  
T. Pogrebnaya
Keyword(s):  
Electrode Materials ◽  
High Surface ◽  
High Surface Area ◽  
Koh Activation ◽  
Capacitive Deionization ◽  
Activation Temperature ◽  
Variable Parameters ◽  
Chicken Feathers ◽  
Bet Method ◽  
Removal Of Heavy Metals

Abstract Capacitive deionization (CDI) is a promising and rapidly growing technology for water treatment and the electrode materials play a key role in improving CDI performance. In this study, high surface area activated carbon was prepared from chicken feather (CF) bio-waste through pyrolysis and KOH activation; the KOH:CF ratio (R) and activation temperature (Ta) were variable parameters. The material was characterized by using the Brunauer, Emmett and Teller (BET) method, Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The lead (Pb2+) removal test was performed with a CDI cell containing the fabricated carbon electrode and 100 mg L−1 Pb(NO3)2 solution; the sample prepared with the ratio R of 1:1 and Ta = 800 °C exhibited higher Pb2+ removal efficiency of 81% and electro sorption capacity of 4.1 mg g−1 at the electrode potential 1.2 V and flow rate 5 mL min−1. Therefore, CF-derived carbon is considered as a promising CDI electrode material for removal of heavy metals from waste water.

Conventional to Nano-Green Adsorbents for Water Pollution Management - A Review

2014 ◽  
Vol 925 ◽  
pp. 674-678 ◽  
Author(s):  
Md Eaqub Ali ◽  
Mahbub Ullah ◽  
Sharifah Bee Abd Hamid
Keyword(s):  
Water Pollution ◽  
High Surface ◽  
High Surface Area ◽  
Cost Effective ◽  
Chemical Precipitation ◽  
Surface Reactivity ◽  
Pollutant Removal ◽  
Treatment Techniques ◽  
Water Pollution Management ◽  
Important Position

Pure and clean water is a must for living a healthy life. However, the increasing influence of urbanization, industrialization, domestic and agricultural activities, is continuously adding both conventional and newly emerging pollutants to the earth's water bodies, seriously affecting both the terrestrial and aquatic flora and fauna. Thus water pollution has become a major issue in the global perspectives. In the last few decades, numerous methods, such as chemical precipitation, filtration, oxidation, ion exchange treatment and adsorption have been proposed for the purification of contaminated water. Among these methods, adsorption has taken an important position in water purification technology. This is because of its ease of operations, cost-effective maintenance, and availability of adsorbents in various forms with high surface area, porous structure and specific surface reactivity. Instead of having many attractive properties, many adsorbents have failed to achieve a good acceptability at commercial levels. In the recent years, nanotechnology approaches have introduced nanoadsorbent which is capable of removing water pollutants more efficiently. In this review, various water treatment techniques with their shortcomings followed by efficiency of adsorption and nanoadsorbent for pollutant removal are discussed with green chemistry perspectives.

scholarly journals Iron removal from ground water using Egyptian cost-effective clay minerals

2020 ◽  
Vol 3 (1) ◽  
pp. 23
Author(s):  
Hamdy Maamoun Abdel-Ghafar ◽  
ElSayed Abdel-Aal ◽  
Bahgat El_anadouli
Keyword(s):  
High Surface ◽  
High Surface Area ◽  
Chemical Characterization ◽  
Statistical Design ◽  
Cost Effective ◽  
Iron Removal ◽  
Optimum Conditions ◽  
Physical And Chemical Characterization ◽  
Physical And Chemical

Glauconite and kaolin are used as adsorbent materials for iron removal from synthetic solutions. Different concentrations of iron solutions have been prepared (10, 20 and 30 mg/L). Different dose of glauconite and kaolin were added (0.1, 0.55 and 1.0 g). Statistical design was used to determine the optimum conditions of iron adsorption on glauconite and kaolin. It is shown that glauconite has high adsorption for iron reaching to 95% while kaolin has lower adsorption for iron. Physical and chemical characterization of glauconite and kaolin was tested. High surface area of glauconite (19.8 m2/g) compared to kaolin (5.4 m2/g) explains its high removal efficiency. 

Sign in / Sign up

Export Citation Format

Share Document