scholarly journals Influence of the chemical structure of cross-linking agents on properties of thermally reversible networks

2016 ◽  
Vol 88 (12) ◽  
pp. 1103-1116 ◽  
Author(s):  
Lorenzo Massimo Polgar ◽  
Robin R.J. Cerpentier ◽  
Gijs H. Vermeij ◽  
Francesco Picchioni ◽  
Martin van Duin
Keyword(s):  
Chemical Structure ◽  
Chemical Conversion ◽  
Rubber Matrix ◽  
Cross Linking ◽  
Cross Link ◽  
Molar Amount ◽  
Link Density ◽  
Cross Link Density ◽  
Cross Linker ◽  
The Cross

Abstract It is well-known that the properties of cross-linked rubbers are strongly affected by the cross-link density. In this work it is shown that for thermoreversibly cross-linked elastomers, the type and length of the cross-linker also have a significant effect. A homologous series of diamine and bismaleimide cross-linkers was used to cross-link maleic-anhydride-grafted EPM irreversibly and furan-modified EPM thermoreversibly, respectively. Bismaleimide cross-linkers with a polarity close to that of EPM and a relatively low melting point have a better solubility in the rubber matrix, which results in higher chemical conversion and, thus, higher cross-link densities at the same molar amount of cross-linker. Samples cross-linked with different spacers (aromatic and aliphatic spacers of different lengths) were compared at the same cross-link density to interpret the effects on the material properties. The rigid character of the short aliphatic and the aromatic cross-linkers accounts for the observed increase in hardness, Young´s modulus and tensile strength with respect to the longer, more flexible aliphatic cross-linkers. In conclusion, the structure of the cross-linking agent can be considered as an alternative variable in tuning the rubber properties, especially for thermoreversibly cross-linked rubber.

scholarly journals Magnetic composites based on NR and strontium ferrite

2019 ◽  
Vol 12 (1) ◽  
pp. 63-69
Author(s):  
Ján Kruželák ◽  
Andrea Kvasničáková ◽  
Rastislav Dosoudil ◽  
Ivan Hudec
Keyword(s):  
Carbon Black ◽  
Strontium Ferrite ◽  
Rubber Matrix ◽  
Cross Link ◽  
Magnetic Composites ◽  
Link Density ◽  
Cross Links ◽  
Cross Link Density ◽  
The Cross ◽  
Thermo Physical Properties

Abstract Two types of composites based on natural rubber (NR) and strontium ferrite were tested in this study. Composites of the first type were prepared by incorporation of strontium ferrite in the concentration range ranging from 0 to 100 phr (parts per hundred rubber) into pure NR based rubber matrix, while with those of the second type, strontium ferrite was dosed in the same concentration level into NR based rubber batch with constant amount of carbon black — 25 phr. For rubber matrices cross-linking, a standard sulfur based curing system was used. This work is focused on the effect of magnetic filler content on physico-mechanical, magnetic and thermo-physical properties of composite materials. Subsequently, the cross-link density and the structure of the formed sulfidic cross-links were examined. The results showed that the cross-link density of both types of composites increased with the increasing content of magnetic filler, while the structure of the sulfidic cross-links was almost not influenced by the amount of strontium ferrite. Tensile strength of rubber composites with pure rubber matrix was slightly improved by the incorporation of ferrite, while in case of composites based on a carbon black batch, the incorporation of magnetic filler resulted in the decrease of this characteristic. The presence of magnetic filler in both types of composites leads to a significant increase of the remanent magnetic induction.

Thermooxidative aging of rubber composites based on NR and NBR with incorporated strontium ferrite

2017 ◽  
Vol 50 (1) ◽  
pp. 71-91 ◽  
Author(s):  
Ján Kruželák ◽  
Rastislav Dosoudil ◽  
Ivan Hudec
Keyword(s):  
Strontium Ferrite ◽  
Rubber Matrix ◽  
Magnetic Characteristics ◽  
Butadiene Rubber ◽  
Cross Link ◽  
Magnetic Composites ◽  
Aging Period ◽  
Link Density ◽  
Cross Link Density ◽  
The Cross

Rubber magnetic composites were prepared by incorporation of strontium ferrite in concentration scale ranging from 0 phr to 100 phr into rubber matrices based on natural rubber (NR) and acrylonitrile-butadiene rubber (NBR). The composite systems were exposed to the conditions of thermooxidative aging at 70°C for 7, 14, and 28 days. The influence of aging period on the behavior of prepared materials was considered based on investigation of their cross-link density, physical–mechanical, and magnetic characteristics. The results revealed that the influence of thermooxidative aging on composite characteristics is dependent on the type of rubber matrix. The thermooxidative aging was found to have negative effect on the cross-link density and tensile properties of composites based on NR, which were deteriorated in dependence of aging time. The possible influence of magnetic filler content on aging mechanism was observed during last period of aging after which the decrease in cross-link density and tensile characteristics was more pronounced with increasing content of strontium ferrite. By contrast, the cross-link density, modulus, and hardness of composites based on NBR were found to be positively influenced by aging as their values showed increasing trend with extension of aging period.

PEROXIDE CROSS-LINKING OF EPDM USING MOVING DIE RHEOMETER MEASUREMENTS. II: EFFECTS OF THE PROCESS OILS

2018 ◽  
Vol 91 (3) ◽  
pp. 561-576 ◽  
Author(s):  
He Wang ◽  
Tao Zhuang ◽  
Xinyan Shi ◽  
Martin Van Duin ◽  
Shugao Zhao
Keyword(s):  
Dilution Effect ◽  
Gel Permeation Chromatography ◽  
Chemical Effect ◽  
Cross Linking ◽  
Cross Link ◽  
Entanglement Density ◽  
Link Density ◽  
Oil Concentration ◽  
Cross Link Density ◽  
The Cross

ABSTRACT A series of compounds based on peroxide-cured ethylene–propylene–diene monomer rubber (EPDM) was prepared with varying amounts of paraffinic process oil, such as Sunpar 2280, squalane, and dodecane. The cross-linked network composition of EPDM vulcanizates, which correlated directly with the structure and the concentration of process oils, was successfully carried out by either an exponential or a linear fitting procedure. It was found that an increase in process oil concentration caused a decrease in total cross-link density, which could be quantitatively divided into the effect of dilution and chemical effect of oil, represented as a linear and an exponential function of process oil concentration, respectively. Experimental results indicated that whether dilution effect or chemical effect, the addition of Sunpar 2280 affected the decrease of cross-link densities of EPDM vulcanizates most obviously, followed by squalane, and then dodecane, which was the weakest. On the other hand, at lower squalane loading, the chemical effect of squalane dominated the decrease of cross-link density of peroxide-cured EPDMs compared with the dilution effect of oils. Gel permeation chromatography spectra confirmed squalane could consume the free radicals derived from peroxide, forming dimers and trimers, and the variation of squalane content did not affect the activation energy of the cross-linking reaction calculated based on the Kissinger method. The cross-linking efficiency of peroxide and physical entanglement density both linearly decreased with the increase of squalane content.

scholarly journals Ionic Liquids Applied to Improve the Dispersion of Coagent Particles in an Elastomer

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Magdalena Maciejewska ◽  
Marian Zaborski
Keyword(s):  
Ionic Liquids ◽  
Alkyl Chain ◽  
Cross Linking ◽  
Cross Link ◽  
Rubber Compounds ◽  
Link Density ◽  
Vulcanization Kinetics ◽  
Cross Link Density ◽  
The Cross ◽  
Kinetics Of

The aim of this work was to study the activity of several ionic liquids (alkylimidazolium salts) that are used to improve the dispersion of coagent particles in peroxide-cross-linked hydrogenated acrylonitrile butadiene elastomer (HNBR). Hydrotalcite grafted with monoallyl maleate was applied as a coagent for the HNBR vulcanization. In this paper, we discuss the effect of the ionic liquids (alkylimidazolium salts) with respect to their anion (bromide, chloride, tetrafluoroborate, and hexafluorophosphate) and the length of alkyl chain in the cation (allyl-, ethyl-, butyl-, hexyl-, and octyl-) on the vulcanization kinetics of rubber compounds. The influence of ionic liquids on the cross-link density, the mechanical properties of the vulcanizates, and their resistance to weather ageing were also studied. Alkylimidazolium salts seem to improve the dispersion of the coagent particles and to be active in the cross-linking of HNBR with peroxide. The type of ionic liquid considerably influences the activity of the coagent particles toward the HNBR. The application of ionic liquids increases the cross-link density of the vulcanizates and improves their resistance to weather aging.

Relationship between the cross-link structure and properties of peroxide and sulfur-cured magnetic composites based on NR and NBR

2016 ◽  
Vol 49 (6) ◽  
pp. 459-480 ◽  
Author(s):  
Ján Kruželák ◽  
Richard Sýkora ◽  
Rastislav Dosoudil ◽  
Ivan Hudec
Keyword(s):  
Cross Linking ◽  
Butadiene Rubber ◽  
Cross Link ◽  
Magnetic Composites ◽  
Link Structure ◽  
Link Density ◽  
Cross Link Density ◽  
The Cross ◽  
The Relationship ◽  
Curing Systems

In the present work, rubber magnetic composites were prepared by incorporation of strontium ferrite into rubber matrices based on natural rubber (NR) and acrylonitrile butadiene rubber (NBR). The sulfur and peroxide curing systems were introduced in cross-linking of rubber matrices. The research was aimed at the evaluation of magnetic filler content and type of curing system on the cross-link density, physical–mechanical and magnetic properties of prepared composites. The relationship between the composition of elastomers and cross-link structure within the rubber matrices, formed by applying different curing systems, was under investigation through strain–stress behavior of tested materials. The achieved results showed that ferrite behaves as a reinforcing filler in peroxide-cured composites based on NR, and in both, sulfur as well as peroxide-cured composites based on NBR. The results also demonstrated that the cross-linking degree and the type of cross-link structure as well as the composition of rubber matrices, to a large extent, influence the property spectrum of tested composite systems.

Mechanical and structural consequences of associative dynamic cross-linking in acrylic diblock copolymers

2021 ◽  
Author(s):  
Jacob Ishibashi ◽  
Ian Pierce ◽  
Alice Chang ◽  
Aristotelis Zografos ◽  
Bassil El-Zaatari ◽  
...  
Keyword(s):  
Viscoelastic Properties ◽  
Diblock Copolymers ◽  
Microphase Separation ◽  
Network Connectivity ◽  
Ethyl Acrylate ◽  
Cross Linking ◽  
Cross Link ◽  
Block Polymers ◽  
Link Density ◽  
Cross Link Density

<p>The composition of low-T<sub>g</sub> <i>n</i>-butylacrylate-<i>block</i>-(acetoxyaceto)ethyl acrylate block polymers is investigated as a strategy to tune the properties of dynamically cross-linked vinylogous urethane vitrimers. As the proportion of the cross-linkable block is increased, the thermorheological properties, structure, and stress relaxation evolve in ways that cannot be explained by increasing cross-link density alone. Evidence is presented that network connectivity defects such as loops and dangling ends are increased by microphase separation. The thermomechanical and viscoelastic properties of block copolymer-derived vitrimers arise from the subtle interplay of microphase separation and network defects.</p><div><br></div><p></p>

Mechanical behavior of poly(methyl methacrylate)-based ionogels

Soft Matter ◽  
2014 ◽  
Vol 10 (40) ◽  
pp. 7993-8000 ◽  
Author(s):  
Mingyu Li ◽  
Jianyu Li ◽  
Hui Na ◽  
Joost J. Vlassak
Keyword(s):  
Methyl Methacrylate ◽  
Mechanical Behavior ◽  
Fracture Energy ◽  
Cross Link ◽  
Poly Methyl Methacrylate ◽  
Link Density ◽  
Cross Link Density ◽  
The Cross ◽  
The Ideal

We demonstrate that the fracture energy of ionogels correlates inversely with the cross-link density. The behavior of ionogels is well captured by the ideal elastomeric gel model.

PEG Cross-Linked Alginate Hydrogels with Controlled Mechanical Properties

1998 ◽  
Vol 530 ◽  
Author(s):  
Petra Eiselt ◽  
Jon A. Rowley ◽  
David J. Mooney
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Molecular Weight ◽  
Elastic Modulus ◽  
Cell Transplantation ◽  
Cross Linking ◽  
Cross Link ◽  
Link Density ◽  
A Cell ◽  
Cross Link Density

AbstractReconstruction of tissues and organs utilizing cell transplantation offers an attractive approach for the treatment of patients suffering from organ failure or loss. Highly porous synthetic materials are often used to mimic the function of the extracellular matrix (ECM) in tissue engineering, and serve as a cell delivery vehicle for the formation of tissues in vivo. Alginate, a linear copolysaccharide composed of D-mannuronic acid (M) and L-guluronic acid (G) units is widely used as a cell transplantation matrix. Alginate is considered to be biocompatible, and hydrogels are formed in the presence of divalent cations such as Ca2+, Ba2+ and Sr2+. However, ionically cross-linked alginate gels continuously lose their mechanical properties over time with uncontrollable degradation behavior. We have modified alginate via covalent coupling of cross-linking molecules to expand and stabilize the mechanical property ranges of these gels. Several diamino PEG molecules of varying molecular weight (200, 400, 1000, 3400) were synthesized utilizing carbodiimide chemistry. Sodium alginate was covalently cross-linked with these cross-linking molecules, and mechanical properties of the resulting hydrogels were determined. The elastic modulus of the cross-linked alginates depended on the molecular weight of the cross-linking molecules, and ranged from 10-110 kPa. The theoretical cross-link density in the hydrogels was also varied from 3 to 47% (relative to the carboxylic groups in the alginate) and the mechanical properties were measured. The elastic modulus increased gradually and reached a maximum at a cross-link density of 15%. In summary, covalently coupled hydrogels can be synthesized which exhibit a wide range of mechanical properties, and these materials may be useful in a number of tissue engineering applications.

scholarly journals Application of Peroxide Curing Systems in Cross-Linking of Rubber Magnets Based on NBR and Barium Ferrite

2019 ◽  
Vol 2019 ◽  
pp. 1-10
Author(s):  
Ján Kruželák ◽  
Andrea Kvasničáková ◽  
Elena Medlenová ◽  
Rastislav Dosoudil ◽  
Ivan Hudec
Keyword(s):  
Mechanical Properties ◽  
Barium Ferrite ◽  
Cross Linking ◽  
Butadiene Rubber ◽  
Cross Link ◽  
System Composition ◽  
Peroxide Curing ◽  
Link Density ◽  
Cross Link Density ◽  
Curing Systems

Rubber magnetic composites were prepared by incorporation of barium ferrite in constant amount—50 phr into acrylonitrile-butadiene rubber. Dicumyl peroxide as the curing agent was used for cross-linking of rubber magnets alone, or in combination with four different types of co-agents. The main aim was to examine the influence of curing system composition on magnetic and physical-mechanical properties of composites. The cross-link density and the structure of the formed cross-links were investigated too. The results demonstrated that the type and amount of the co-agent had significant influence on cross-link density, which was reflected in typical change of physical-mechanical properties. The tensile strength increased with increasing amount of co-agents, which can be attributed to the improvement of adhesion and compatibility on the interphase filler-rubber due to the presence of co-agents. Magnetic characteristics were found not to be influenced by the curing system composition. The application of peroxide curing systems consisting of organic peroxide and co-agents leads to the preparation of rubber magnets with not only good magnetic properties but also with improved physical-mechanical properties, which could broaden the sphere of their application uses.

Sign in / Sign up

Export Citation Format

Share Document