Surface Modification of Polycarbonateurethane by Grafting Phosphorylcholine Glyceraldehydes for Improving Hemocompatibility

2012 ◽  
Vol 1403 ◽  
Author(s):  
Wei Gao ◽  
Yakai Feng ◽  
Jian Lu ◽  
Jintang Guo
Keyword(s):  
Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Polymer Surface ◽  
Xps Analysis ◽  
Poly Ethylene Glycol ◽  
Water Contact ◽  
X Ray ◽  
Poly Ethylene ◽  
Covalently Linked ◽  
Scanning Electron

ABSTRACTPhosphorylcholine glyceraldehyde (PCGA) was used as a phosphorylcholine (PC) group containing compound to graft onto the surface of polycarbonateurethane (PCU) film using 1,6-hexanediamine (HDA) or α,ω-diamino-poly(ethylene glycol) (APEG, Mn = 200) as a spacer, in order to introduce biomimetic structure onto the polymer surface. X-ray photoelectron spectroscopy (XPS) analysis shows that PCGA has been covalently linked to the PCU surface. Water contact angle test suggests that the surface hydrophilicity has been improved after PCGA is grafted onto the surface of PCU film. Scanning electron microscope (SEM) observation of the modified PCU films after contacting with plasma-rich plasma demonstrates that platelets rarely adhere but a large number of platelets adhere to the original PCU surface. The hemocompatibility of the PC modified PCU film has been improved obviously after grafting with PCGA with PEG spacer.

The Surface Modification and Characteristics of Useful Expanded PTFE Composites by Photo-Radiation Methods

2013 ◽  
Vol 690-693 ◽  
pp. 1636-1640 ◽  
Author(s):  
Te Hsing Wu ◽  
Ko Shao Chen ◽  
Lie Hang Shen
Keyword(s):  
Contact Angle ◽  
Acetic Acid ◽  
Photoelectron Spectroscopy ◽  
Plasma Deposition ◽  
Material Surface ◽  
Water Contact ◽  
X Ray ◽  
Hydrogel Film ◽  
Γ Ray ◽  
Ptfe Composites

In this study, We immobilized hydrogel material onto expanded polytetrafluoroethylene (ePTFE) film and used as an functional biomaterial. The material is a film containing titanium oxide onto polymer sheet. The hydrogel film is hydrophilic, bacterial inactivated and bio-compatible. In order to improve the ePTFE film biocompatibility, the cold plasma or γ-ray technology was used with acetic acid as monomer to deposit onto ePTFE film and then (N-isopropylacrylamide) was grafted onto the surface by radiation photo-grafting. The characteristics of the material surface were evaluated with X-ray photoelectron spectroscopy (XPS), FTIR and water contact angle. It was found that the contact angle of water on the untreated ePTFE significantly decrease from125° to 72° after ePTFE film being treated with acetic acid plasma deposition procedure. Due to the hydrophilicity of poly (N-isopropylacrylamide), so the contact angle of water on the ePTFE-g-NIPAAm almost approached to 0°. This thermal sensitive ePTFE hydrogels can be applied to artificial guiding tube and wound dressing material.

Effect of Plasma-Induced Polymerization on Contact Angle of Paper

2011 ◽  
Vol 396-398 ◽  
pp. 1619-1623
Author(s):  
Zhao Ping Song ◽  
Jun Rong Li ◽  
Hui Ning Xiao
Keyword(s):  
Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Polymer Grafting ◽  
Hydrophobic Property ◽  
Cellulose Fibres ◽  
Water Contact ◽  
X Ray ◽  
Factors Associated

Hydrophobic modification of cellulose fibres was conducted by plasma-induced polymer grafting in an attempt to increase the hydrophobicity of paper. Two hydrophobic monomers, i.e., butyl acrylate (BA) and 2-ethylhexyl acrylate (2-EHA) were grafted on cellulose fibres, induced by atmospheric cold plasma. Various influencing factors associated with the plasma-induced grafting were investigated, including the contact time and reaction temperature with monomers, and the dosage of monomers. Contact-angle measurement, infrared spectrum (IR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM) were used to ascertain the occurrence of the grafting. The results showed that the hydrophobic property of the modified paper sheet was improved significantly after the plasma-induced grafting. The water contact angle on the surface of the paper reached up to higher than125°.

scholarly journals Improving Osteogenesis Activity on BMP-2-Immobilized PCL Fibers Modified by theγ-Ray Irradiation Technique

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Young-Pil Yun ◽  
Jae Yong Lee ◽  
Won Jae Jeong ◽  
Kyeongsoon Park ◽  
Hak-Jun Kim ◽  
...  
Keyword(s):  
Contact Angle ◽  
Alkaline Phosphatase ◽  
Osteogenic Differentiation ◽  
Photoelectron Spectroscopy ◽  
Calcium Deposition ◽  
Gene Expressions ◽  
X Ray ◽  
Alp Activity ◽  
Surface Modified ◽  
Scanning Electron

The purpose of this study was to demonstrate the ability of BMP-2-immobilized polycaprolactone (PCL) fibers modified using theγ-ray irradiation technique to induce the osteogenic differentiation of MG-63 cells. Poly acrylic acid (AAc) was grafted onto the PCL fibers by theγ-ray irradiation technique. BMP-2 was then subsequently immobilized onto the AAc-PCL fibers (BMP-2/AAc-PCL). PCL and surface-modified PCL fibers was characterized by evaluation with a scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and contact angle. The biological activity of the PCL and surface-modified PCL fibers were characterized by alkaline phosphatase (ALP) activity, calcium deposition, and the mRNA expression of osteocalcin and osteopontin in MG-63 cells. Successfully grafted AAc and PCL fibers with immobilized BMP-2 were confirmed by XPS results. The results of the contact angle showed that BMP-2/AAc-PCL fibers have more hydrophilic properties in comparison to PCL fibers. The ALP activity, calcium deposition, and gene expressions of MG-63 cells grown on BMP-2/AAc-PCL fibers showed greatly induced osteogenic differentiation in comparison to the PCL fibers. In conclusion, these results demonstrated that BMP-2/AAc-PCL fibers have the potential to effectively induce the osteogenic differentiation of MG-63 cells.

The Study of Immobilization Thermal-Sensitive Hydrogel onto ePTFE Film Use the Cold Plasma and Photo-Grafting Technique

2006 ◽  
Vol 15-17 ◽  
pp. 187-192 ◽  
Author(s):  
Ko Shao Chen ◽  
Su Chen Chen ◽  
Yi Chun Yeh ◽  
Wei Cheng Lien ◽  
Hong Ru Lin ◽  
...  
Keyword(s):  
Contact Angle ◽  
Acetic Acid ◽  
Water Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Cold Plasma ◽  
Plasma Deposition ◽  
Plasma Technology ◽  
Water Contact ◽  
X Ray ◽  
Grafting Technique

Expanded polytetrafluoroethylene (ePTFE) is a bioinert material. To improve the ePTFE film biocompatibility, the cold plasma technology was used with acetic acid as monomer to deposit onto ePTFE film and then (N-isopropylacrylamide) was grafted onto the surface by photo-grafting. The characteristics of the surface were evaluated with X-ray photoelectron spectroscopy (XPS), FTIR and water contact angle. It was found that the contact angle of water on the untreated ePTFE significantly decrease from125° to 72° after ePTFE film being treated with acetic acid plasma deposition treatment. Due to the hydrophilicity of poly(N-isopropylacrylamide), the contact angle of water on the ePTFE-g-NIPAAm approached to 0°.

scholarly journals ENHANCING HYDROPHILICITY OF POLYSULFONE MEMBRANE SURFACE BY UV IRRADIATION OF DIFFERENT WAVELENGTHS AND BY PEG GRAFTING

2021 ◽  
Vol 83 (4) ◽  
pp. 111-117
Author(s):  
Soraya Ruangdit ◽  
Suksawat Sirijaruku ◽  
Thawat Chittrakarn ◽  
Chaiporn Kaew-on
Keyword(s):  
Contact Angle ◽  
Membrane Surface ◽  
Water Flux ◽  
Separation Performance ◽  
Poly Ethylene Glycol ◽  
Uv Treatment ◽  
Water Contact ◽  
Polysulfone Membrane ◽  
Membrane Surfaces ◽  
Poly Ethylene

Polysulfone polymer (PSF) membrane has disadvantages due to its hydrophobicity, which may cause fouling and reduce separation performance. Therefore, this study aimed to enhance the hydrophilicity of PSF membranes by using irradiation at different ultraviolet (UV) wavelengths, followed by Poly(ethylene glycol) (PEG) grafting on the PSF surfaces. The hydrophilicity of the treated membrane surfaces was examined by measuring water contact angle (WCA), surface energy (SE), surface morphology, functional groups, salt rejection, and water flux in a filtration instrument. The results show that with long UV treatment for up to 72 h, the 312 nm wavelength gave lesser WCA than treatment at 254 nm. The treated PSF membrane irradiated at 312 nm for 72 h, followed by PEG grafting, was effectively improved and retained increased hydrophilicity for up to thirty days.

scholarly journals The Covalent Tethering of Poly(ethylene glycol) to Nylon 6 Surface via N,N′-Disuccinimidyl Carbonate Conjugation: A New Approach in the Fight against Pathogenic Bacteria

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2181
Author(s):  
Sumita Swar ◽  
Veronika Máková ◽  
Ivan Stibor
Keyword(s):  
Photoelectron Spectroscopy ◽  
Pathogenic Bacteria ◽  
Polymer Surface ◽  
Nylon 6 ◽  
Secondary Amines ◽  
Surface Immobilization ◽  
Water Contact ◽  
Force Microscopy ◽  
Poly Ethylene

Different forms of unmodified and modified Poly(ethylene glycols) (PEGs) are widely used as antifouling and antibacterial agents for biomedical industries and Nylon 6 is one of the polymers used for biomedical textiles. Our recent study focused on an efficient approach to PEG immobilization on a reduced Nylon 6 surface via N,N′–disuccinimidyl carbonate (DSC) conjugation. The conversion of amide functional groups to secondary amines on the Nylon 6 polymer surface was achieved by the reducing agent borane-tetrahydrofuran (BH3–THF) complex, before binding the PEG. Various techniques, including water contact angle and free surface energy measurements, atomic force microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy, were used to confirm the desired surface immobilization. Our findings indicated that PEG may be efficiently tethered to the Nylon 6 surface via DSC, having an enormous future potential for antifouling biomedical materials. The bacterial adhesion performances against S. aureus and P. aeruginosa were examined. In vitro cytocompatibility was successfully tested on pure, reduced, and PEG immobilized samples.

scholarly journals Chemical Synthesis and Characterization of Poly(poly(ethylene glycol) methacrylate)-Grafted CdTe Nanocrystals via RAFT Polymerization for Covalent Immobilization of Adenosine

Polymers ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 77 ◽  
Author(s):  
Trinh Duy Nguyen ◽  
Hieu Vu-Quang ◽  
Thanh Sang Vo ◽  
Duy Chinh Nguyen ◽  
Dai-Viet N. Vo ◽  
...  
Keyword(s):  
Ethylene Glycol ◽  
Photoelectron Spectroscopy ◽  
Raft Polymerization ◽  
Condensation Reaction ◽  
Covalent Bond ◽  
Poly Ethylene Glycol ◽  
X Ray ◽  
Glycol Methacrylate ◽  
Cdte Qds ◽  
Poly Ethylene

This paper describes the functionalization of poly(poly(ethylene glycol) methacrylate) (PPEGMA)-grafted CdTe (PPEGMA-g-CdTe) quantum dots (QDs) via surface-initiated reversible addition–fragmentation chain transfer (SI-RAFT) polymerization for immobilization of adenosine. Initially, the hydroxyl-coated CdTe QDs, synthesized using 2-mercaptoethanol (ME) as a capping agent, were coupled with a RAFT agent, S-benzyl S′-trimethoxysilylpropyltrithiocarbonate (BTPT), through a condensation reaction. Then, 2,2′-azobisisobutyronitrile (AIBN) was used to successfully initiate in situ RAFT polymerization to generate PPEGMA-g-CdTe nanocomposites. Adenosine-above-PPEGMA-grafted CdTe (Ado-i-PPEGMA-g-CdTe) hybrids were formed by the polymer shell, which had successfully undergone bioconjugation and postfunctionalization by adenosine (as a nucleoside). Fourier transform infrared (FT-IR) spectrophotometry, energy-dispersive X-ray (EDX) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy results indicated that a robust covalent bond was created between the organic PPEGMA part, cadmium telluride (CdTe) QDs, and the adenosine conjugate. The optical properties of the PPEGMA-g-CdTe and Ado-i-PPEGMA-g-CdTe hybrids were investigated by photoluminescence (PL) spectroscopy, and the results suggest that they have a great potential for application as optimal materials in biomedicine.

Well-Defined Amphiphilic Polymer-Si(100) Hybrids via Surface-Initiated Atom Transfer Radical Polymerization

2013 ◽  
Vol 669 ◽  
pp. 239-245 ◽  
Author(s):  
Jin Wen Peng ◽  
Riu Hua Mo ◽  
Zhen Fan Liu ◽  
Yuan Wei Zhong ◽  
Qin Jie ◽  
...  
Keyword(s):  
Atom Transfer Radical Polymerization ◽  
Radical Polymerization ◽  
Photoelectron Spectroscopy ◽  
Polymer Brushes ◽  
Amphiphilic Polymer ◽  
Atom Transfer ◽  
Poly Ethylene Glycol ◽  
X Ray ◽  
Atomic Force ◽  
Poly Ethylene

Well-defined amphiphilic graft polymer brushes containing fluoropolymer segments have been successfully prepared by (i) UV-induced coupling of 4-vinylbenzyl chloride (VBC) with the hydrogen-termined Si(100) (Si-VBC surface), (ii) surface-initiated atom transfer radical polymerization (ATRP) of 2-hydroxyethl methacrylate (HEMA) to produce the Si–VBC–g–P(HEMA) surface as the backbone of macroinitiator for further ATRPs, (iii) coupling of 2-bromoisobutyrl bromide with the HEMA polymer(P(HEMA)) by the esterification to produce the macroinitiators for the subsequent ATRP(Si–VBC–g–P(HEMA)-R3Br), (iv) surface-initiated ATRP of 2,2,3,3,4,4,4-heptafluorobutyl acrylate (HFBA) to produce the Si–VBC–g–P(HEMA)–g–P(HFBA) surface, and (v) the active P(HFBA) chain ends being used as the initiator for the subsequent ATRP of poly(ethylene glycol) monomethacrylate (PEGMA) to produce the amphiphilic Si–VBC–g–P(HEMA)–g–P(HFBA)–b–P(PEGMA) brush surface. The chemical composition and functionality of the silicon surface were characterised by X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and ellipsometry.

The effect of high-current pulsed electron beam modification on the surface wetting property of polyamide 6

e-Polymers ◽  
2017 ◽  
Vol 17 (1) ◽  
pp. 23-29 ◽  
Author(s):  
Yuan Fang Chen ◽  
Tao Zhang ◽  
Meng Tang ◽  
Ding Xie ◽  
Qian Long ◽  
...  
Keyword(s):  
Electron Beam ◽  
Photoelectron Spectroscopy ◽  
Polyamide 6 ◽  
High Current ◽  
Surface Wetting ◽  
Water Contact ◽  
X Ray ◽  
Pulsed Electron Beam ◽  
Wetting Property ◽  
Scanning Electron

AbstractThis study demonstrates that different modification pulse voltages affect the wetting property of the surface of polyamide 6 (PA6) with a certain regularity. Broadly, the hydrophilic property of PA6’s surface increases with increasing pulsed voltage. Based on scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analysis, this paper discusses the mechanism by which high current pulsed electron beam (HCPEB) etching modification influences the surface wettability of PA6. Within a certain range below 28 kV, this effect is caused by an increase of in surface roughness due to HCPEB bombardment of the surface. Within a certain range above 28 kV, HCPEB changes the surface morphology, resulting in changes to the wetting property. Furthermore, by using various pulsed voltages to modify the PA6 surface, this study investigated the ability of the Wenzel model to explain changes in the water contact angle and wetting property of PA6’s surface.

Grafting Sulfoammonium Zwitterionic Brushes onto Polycarbonateurethane Surface to Improve Hemocompatibility

2011 ◽  
Vol 306-307 ◽  
pp. 1631-1634 ◽  
Author(s):  
Ya Kai Feng ◽  
Da Zhi Yang ◽  
Hai Yang Zhao ◽  
Jin Tang Guo ◽  
Qing Liang Chen ◽  
...  
Keyword(s):  
Contact Angle ◽  
Fourier Transform ◽  
Physical Properties ◽  
Water Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Potential Application ◽  
Platelet Adhesion ◽  
Fourier Transform Infrared ◽  
Water Contact ◽  
X Ray

Poly(3-dimethyl(methacryloyloxyethyl)ammonium propane sulfonate) (poly(DMAPS)) zwitterionic brushes were grafted onto the polycarbonateurethane (PCU) surface to improve its hydrophilicity and hemocompatibility by Ultraviolet (UV) polymerization. Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS) and water contact angle were used to characterize the chemical and physical properties of the modified PCU surface. DMAPS-grafted PCU films showed significantly high hydrophilicity owing to the high hydrophilic poly(DMAPS) zwitterionic brushes. The cytotoxicity tests revealed the sulfoammonium zwitterionic brushes modified PCU film had good cytocompatibility. In addition, the hemocompatibility of the modified PCU films was evaluated by hemolytic tests and platelet adhesion tests. The PCU films modified with zwitterionic brushes had a lower hemolytic index, showed effective resistance to platelet adhesion. Due to the fact that sulfoammonium zwitterionic brushes can improve the hemocompatibility of the PCU surface, this gives rise to its potential application as blood-contacting materials or devices.

Sign in / Sign up

Export Citation Format

Share Document