An Electron Microscopic Characterization of Mbe-Grown ZnSe/CaAs and ZnSe/Ge Heterointerfaces

1990 ◽  
Vol 198 ◽  
Author(s):  
S.B. Sant ◽  
R.W. Smith ◽  
G.C. Weatherly
Keyword(s):  
Molecular Beam ◽  
Nucleation And Growth ◽  
Epitaxial Films ◽  
Defect Characterization ◽  
Initial Growth ◽  
Electron Microscopic ◽  
Cross Sectional ◽  
Transmission Electron

ABSTRACTMolecular beam epitaxy (MBE) grown ZnSe/GaAs and ZnSe/Ge heterointerfaces have been studied by transmission electron microscopy (TEM). Defect characterization of cross-sectional and planar specimens showed that ZnSe epitaxial films contain numerous twins that predominantly arise at the interface. Planar specimens of ZnSe/Ge were in-situ TEM annealed, for 5.5 hours at 873K. The twins are thermally very stable which would indicate that they arise during the growth process. The occurrence of these twins in the ZnSe film is explained by nucleation and growth of normal and twinned nuclei. Some of the ZnSe films grown on (10O)Ge substrates have low-angle boundaries indicating that the initial growth of the film is by the formation of islands.

High-resolution transmission electron microscopic study of highly oxygen doped silicon layer

1989 ◽  
Vol 47 ◽  
pp. 692-693
Author(s):  
H. Takaoka ◽  
M. Tomita ◽  
T. Hayashi
Keyword(s):  
High Resolution ◽  
Oxygen Concentration ◽  
Silicon Layer ◽  
Detailed Structure ◽  
Electron Microscopic ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Doped Silicon ◽  
Argon Ion

High resolution transmission electron microscopy (HRTEM) is the effective technique for characterization of detailed structure of semiconductor materials. Oxygen is one of the important impurities in semiconductors. Detailed structure of highly oxygen doped silicon has not clearly investigated yet. This report describes detailed structure of highly oxygen doped silicon observed by HRTEM. Both samples prepared by Molecular beam epitaxy (MBE) and ion implantation were observed to investigate effects of oxygen concentration and doping methods to the crystal structure.The observed oxygen doped samples were prepared by MBE method in oxygen environment on (111) substrates. Oxygen concentration was about 1021 atoms/cm3. Another sample was silicon of (100) orientation implanted with oxygen ions at an energy of 180 keV. Oxygen concentration of this sample was about 1020 atoms/cm3 Cross-sectional specimens of (011) orientation were prepared by argon ion thinning and were observed by TEM at an accelerating voltage of 400 kV.

In situ characterization of kinetics and mass transport of PbSe nanowire growth via LS and VLS mechanisms

Nanoscale ◽  
2019 ◽  
Vol 11 (13) ◽  
pp. 5874-5878 ◽  
Author(s):  
Miao Song ◽  
Jaewon Lee ◽  
Bin Wang ◽  
Benjamin A. Legg ◽  
Shenyang Hu ◽  
...  
Keyword(s):  
Mass Transport ◽  
Nucleation And Growth ◽  
In Situ Characterization ◽  
Transport Pathways ◽  
Structure Control ◽  
Transmission Electron ◽  
Gas Heating ◽  
Dependent Mass

We grew binary PbSe nanowires in an in situ gas-heating cell in a transmission electron microscope and elucidated species dependent mass transport pathways and correlations among supersaturation, nucleation, and growth kinetics, enabling structure control.

Structural Characterization of Composition-Modulated ZnSel-xTex Epitaxial Films

1995 ◽  
Vol 417 ◽  
Author(s):  
S. P. Ahrenkiel ◽  
M. H. Bode ◽  
M. M. Al-Jassim ◽  
H. Luo ◽  
S. H. Xin ◽  
...  
Keyword(s):  
Cross Sections ◽  
Small Amplitude ◽  
Molecular Beam ◽  
Growth Direction ◽  
Epitaxial Films ◽  
Modulation Amplitude ◽  
Transmission Electron ◽  
Short Period ◽  
Strain Modulation

AbstractWe examine the microstructure of short-period (14–31 Å) composition modulations in epitaxial ZnSel-xTex ([email protected]) films grown by molecular-beam epitaxy (MBE) on vicinal (001) GaAs. Transmission electron microscope (TEM) images of cross-sections reveal highly-periodic contrast along the growth direction throughout the full thicknesses of the films (over 2 μm) that corresponds to a nearly sinusoidal variation between Se- and Te-rich compositions. Growth of ZnSe1-xTex at 285°C on substrates tilted 4° toward [1111 maximizes the strength and regularity of the modulation. Using dynamical electron-diffraction simulations, we estimate a modulation amplitude of [email protected](7) in a sample showing strong modulation. We assume a small amplitude of strain modulation to fit the experimental data.

In Situ Analysis of magnetic and Structural Properties of Epitaxial and Polycrystalline Ni80Fe20 Thin Films

1993 ◽  
Vol 313 ◽  
Author(s):  
I. Hashim ◽  
H.A. Atwater ◽  
Thomas J. Watson
Keyword(s):  
Magnetic Properties ◽  
Kerr Effect ◽  
High Energy ◽  
Epitaxial Films ◽  
Interface Roughness ◽  
Ex Situ ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
Transmission Electron

ABSTRACTWe have investigated structural and magnetic properties of epitaxial Ni80Fe20 films grown on relaxed epitaxial Cu/Si (001) films. The crystallographic texture of these films was analyzed in situ by reflection high energy electron diffraction (RHEED), and ex situ by x-ray diffraction and cross-sectional transmission electron Microscopy (XTEM). In particular, RHEED intensities were recorded during epitaxial growth, and intensity profiles across Bragg rods were used to calculate the surface lattice constant, and hence, find the critical epitaxial thickness for which Ni80Fe20 grows pseudomorphically on Cu (100). XTEM analysis indicated that the epitaxial films had atomically-abrupt interfaces which was not the case for polycrystalline Cu and Ni80Fe20 film interfaces. The Magnetic properties of these epitaxial films were Measured in situ using Magneto-optic Kerr effect magnetometry and were compared with those of polycrystalline films grown on SiO2/Si. Large Hc (∼ 35 Oe) was observed for epitaxial Ni80Fe20 films less than 3.0 nm thick whereas for increasing thickness, Hc decreased approximately monotonically to a few Oersteds. Correlations were made between magnetic properties of these epitaxial films, the strain in the film and the interface roughness obtained from XTEM analysis.

Migration-Enhanced Molecular Beam Epitaxial Growth and Characterization of GaAs on Si Substrates

1988 ◽  
Vol 144 ◽  
Author(s):  
J.H. Kim ◽  
S. Sakai ◽  
J.K. Liu ◽  
G. Raohakrishnan ◽  
S.S. Chang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Molecular Beam ◽  
Chemical Vapor ◽  
Organic Chemical ◽  
Cross Sectional ◽  
Light Emitting ◽  
Si Substrates ◽  
Molecular Beam Epitaxial

ABSTRACTWe first report on migration-enhanced molecular beam epitaxial (MEMBE) growth and characterization of the GaAs layers on Si substrates (GaAs/Si). Excellent surface morphology GaAs layers were successfully grown on (100) Sisubstrates misoriented 4 toward [110] direction. The MEMBE growth method isdescribed and material properties are compared with those of normal two-step MBE-grown or in-situ annealed layers. Micrographs of cross-sectional view transmission electron microscopy (TEM) and scanning surface electron microscopy (SEM) of MEMBE-grown GaAs/Si showed dislocation densities of 107 cm-2 over ten times lower than those of two-step MBE-grown or in-situ annealedlayers. AlGaAs/GaAs double heterostructure lasers and light-emitting diodeshave been successfully grown on MEMBE GaAs/Si by both metal organic chemical vapor deposition and liquid phase epitaxy. MOCVD-grown lasers showed peak output power as high as 184 mW/facet, pulsed threshold currents as low as150 mA at 300 K, and differential quantum efficiencies of up to 30 %. The LPE-grown light-emitting diodes showed output powers of 1.5 mW and external quantum efficiencies of 3.3 mW/A per facet.

Gas-source molecular beam epitaxy of monocrystalline β–SiC on vicinal α(6H)–SiC

1993 ◽  
Vol 8 (11) ◽  
pp. 2753-2756 ◽  
Author(s):  
L.B. Rowland ◽  
R.S. Kern ◽  
S. Tanaka ◽  
Robert F. Davis
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Nucleation And Growth ◽  
Epitaxial Films ◽  
Gas Source ◽  
Transmission Electron ◽  
Surface Migration

Single-crystal epitaxial films of cubic β(3C)–SiC(111) have been deposited on hexagonal α(6H)–SiC(0001) substrates oriented 3–4° toward [1120] at 1050–1250 °C via gas-source molecular beam epitaxy using disilane (Si2H6) and ethylene (C2H4). High-resolution transmission electron microscopy revealed that the nucleation and growth of the β(3C)–SiC regions occurred primarily on terraces between closely spaced steps because of reduced rates of surface migration at the low growth temperatures. Double positioning boundaries were observed at the intersections of these regions.

Very Thin 2D GaAs Films on Si During the Early Stages of Growth by MBE

1989 ◽  
Vol 159 ◽  
Author(s):  
D.B. Fenner ◽  
D.K. Biegelsen ◽  
B.S. Krusor ◽  
F.A. Ponce ◽  
J.C. Tramontana
Keyword(s):  
Electron Spectroscopy ◽  
Molecular Beam ◽  
Flux Ratio ◽  
Cross Sectional ◽  
Stages Of Growth ◽  
Transmission Electron ◽  
Gaas Films ◽  
Lattice Images ◽  
Graded Thickness

ABSTRACTGaAs samples deposited on Si by molecular beam epitaxy (MBE) with a graded thickness of 0–3 nm initially show the presence of a metastable two dimensional (2D) layer containing Ga and As. In the thicker regions of the wedge samples, islands (3D topography) form in the presence of the 2D sea, i.e., Stranski – Krastanov growth. Compositional profiles of these wedges were made with in situ Auger electron spectroscopy (AES) which has allowed the identification of at least four regimes of growth. Lattice images from cross – sectional transmission electron microscopy (XTEM) are consistent with the AES profiles. Substrate temperature during deposition of the films has a strong effect on film topography, as does the beam – flux ratio on film stoichiometry.

In Situ Fabrication and Characterization of (NiCr)Al-Al2O3 Nanocomposite by Mechanical Alloying

2012 ◽  
Vol 16 ◽  
pp. 21-27 ◽  
Author(s):  
Amir Reza Shirani-Bidabadi ◽  
Ali Shokuhfar ◽  
Mohammad Hossein Enayati ◽  
Mazda Biglari
Keyword(s):  
Electron Microscopy ◽  
Mechanical Alloying ◽  
Structural Changes ◽  
Formation Mechanisms ◽  
Cross Sectional ◽  
Molar Ratios ◽  
Transmission Electron ◽  
Powder Particles

In this research, the formation mechanisms of a (NiCr)Al-Al2O3 nanocomposite were investigated. The structural changes of powder particles during mechanical alloying were studied by X-ray difractometry (XRD) and the morphology and cross sectional microstructure of powder particles were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The methodology involved mechanical alloying of NiO, Cr, and Al with molar ratios of 3:3:8. During mechanical alloying, NiO was first quickly reduced by aluminum atoms to produce NiAl nanocrystalline and Al2O3. Subsequently, and when a longer milling time was applied, chromium atoms diffused into the NiAl lattice. The heat treatment of this structure led to the formation of the (NiCr)Al intermetallic compound as well as Al2O3 with crystalline sizes of 23 nm and 58 nm, respectively.

Growth and Characterization of Si-GaP and Si-GaP-Si Heterostructures

1993 ◽  
Vol 334 ◽  
Author(s):  
N. Dietz ◽  
S. Habermehl ◽  
J. T. Kelliher ◽  
G. Lucovsky ◽  
K. J. Bachmann
Keyword(s):  
Epitaxial Growth ◽  
Chemical Beam Epitaxy ◽  
Si Substrate ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Amorphous Sic ◽  
Secondary Ion ◽  
Source Materials

AbstractThe low temperature epitaxial growth of Si / GaP / Si heterostructures is investigated with the aim using GaP as a dielectric isolation layer for Si circuits. GaP layers have been deposited on Si(100) surfaces by chemical beam epitaxy (CBE) using tertiarybutyl phosphine (TBP) and triethylgallium (TEG) as source materials. The influence of the cleaning and passivation of the GaP surface has been studied in-situ by AES and LEED, with high quality epitaxial growth proceeding on vicinal GaP(100) substrates. Si / GaP / Si heterostructures have been investigated by cross sectional high resolution transmission electron microscope (HRTEM) and secondary ion mass spectroscope (SIMS). These methods reveal the formation of an amorphous SiC interlayer between the Si substrate and GaP film due to diffusion of carbon generated in the decomposition of the metalorganic precursors at the surface to the GaP/Si interface upon prolonged growth (layer thickness > 300Å). The formation of twins parallel to {111} variants in the GaP epilayer are extended into the subsequently grown Si film with minor generation of new twins.

Sign in / Sign up

Export Citation Format

Share Document