In-Situ Observation of Deformation Associated with R-Phase in NiTi Shape Memory Alloy

1995 ◽  
Vol 404 ◽  
Author(s):  
Y. Gao ◽  
Y. Q. Liu ◽  
K. H. Wu
Keyword(s):  
Martensite Transformation ◽  
Room Temperature ◽  
Strain Curve ◽  
Deformation Mode ◽  
Niti Shape Memory Alloy ◽  
In Situ Observation ◽  
Stress Strain Curve ◽  
Second Stage ◽  
Transmission Electron

AbstractAn in-situ straining experiment was performed in a transmission electron microscope (TEM) on the polycrystalline Ti49Ni51 alloy with full R-phase at room temperature. The reorientation of Rphase variants to a single, favorable one was observed under small stress at the beginning of straining, corresponding to the deformation mode of the first yielding stage. During further straining, the observation showed that the reoriented R-phase undergoes a stress-induced martensite transformation, and this dynamic process was considered to contribute to the second stage deformation in the R-phase stress-strain curve. The orientation relationship between the R-phase and stress-induced martensite has been determined and the internal (001)M twins were found in the stressinduced martensite plates.

Crystallographic Features of the A-Type and CE-Type Antiferromagnetic States in the Simple-Perovskite Manganite System Sr1-xNdxMnO3

2011 ◽  
Vol 409 ◽  
pp. 532-537
Author(s):  
Yusuke Onezawa ◽  
Yasuhide Inoue ◽  
Masazumi Arao ◽  
Yasumasa Koyama
Keyword(s):  
Room Temperature ◽  
Three Dimensional ◽  
Electronic System ◽  
Paramagnetic State ◽  
Heating Process ◽  
In Situ Observation ◽  
Perovskite Manganite ◽  
Transmission Electron ◽  
Highly Correlated

The electronic states of Sr1-xNdxMnO3 with the simple perovskite structure are characterized by a three-dimensional highly-correlated electronic system. To understand the detailed features of the A-and CE-type antiferromagnetic states in this system, their crystallographic features for x = 0.47, 0.48, and 0.50 have been investigated mainly by both x-ray powder diffraction and transmission electron microscopy. It was found at room temperature that the crystal structure for x = 0.47 was determined to have the monoclinic C2/m symmetry, while the orthorhombic Imma structure was confirmed for x = 0.48 and 0.50. The in-situ observation for x = 0.47 indicated that, in the heating process from room temperature, the C2/m-to-Imma transition occurred in the paramagnetic state, and that the A-type antiferromagnetic state appeared below about 200 K on cooling. In addition, the cooling from room temperature for x = 0.48 and 0.50 resulted in the direct transitions from the orthorhombic Imma state to the A-and CE-type antiferromagnetic states, respectively. Based on these features, we simply discussed the physical origin of the appearance of the paramagnetic state with the monoclinic symmetry for x = 0.47.

In situ observation of the martensitic transformation in (Mg,Y)-PSZ

1986 ◽  
Vol 44 ◽  
pp. 500-501
Author(s):  
R-R. Lee
Keyword(s):  
Martensitic Transformation ◽  
High Strength ◽  
Nucleation And Growth ◽  
In Situ Observation ◽  
Considerable Potential ◽  
Transmission Electron ◽  
Structural Applications ◽  
Applied Stresses ◽  
Kinetics Of

Partially-stabilized ZrO2 (PSZ) ceramics have considerable potential for advanced structural applications because of their high strength and toughness. These properties derive from small tetragonal ZrO2 (t-ZrO2) precipitates in a cubic (c) ZrO2 matrix, which transform martensitically to monoclinic (m) symmetry under applied stresses. The kinetics of the martensitic transformation is believed to be nucleation controlled and the nucleation is always stress induced. In situ observation of the martensitic transformation using transmission electron microscopy provides considerable information about the nucleation and growth aspects of the transformation.

In situ TEM observations of melting in nanosized eutectic Pb-Cd inclusions embedded in Al

1996 ◽  
Vol 54 ◽  
pp. 986-987
Author(s):  
S. Hagège ◽  
U. Dahmen ◽  
E. Johnson ◽  
A. Johansen ◽  
V.S. Tuboltsev
Keyword(s):  
Electron Microscope ◽  
Melt Spinning ◽  
Ternary Alloys ◽  
Solid Matrix ◽  
Eutectic System ◽  
In Situ Tem ◽  
In Situ Observation ◽  
Orientation Relationships ◽  
Transmission Electron

Small particles of a low-melting phase embedded in a solid matrix with a higher melting point offer the possibility of studying the mechanisms of melting and solidification directly by in-situ observation in a transmission electron microscope. Previous studies of Pb, Cd and other low-melting inclusions embedded in an Al matrix have shown well-defined orientation relationships, strongly faceted shapes, and an unusual size-dependent superheating before melting.[e.g. 1,2].In the present study we have examined the shapes and thermal behavior of eutectic Pb-Cd inclusions in Al. Pb and Cd form a simple eutectic system with each other, but both elements are insoluble in solid Al. Ternary alloys of Al (Pb,Cd) were prepared from high purity elements by melt spinning or by sequential ion implantation of the two alloying additions to achieve a total alloying addition of up to lat%. TEM observations were made using a heating stage in a 200kV electron microscope equipped with a video system for recording dynamic behavior.

scholarly journals In Situ Observation of Electron-Beam-Induced Formation of Nano-Structures in PbTe

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 163
Author(s):  
Iryna Zelenina ◽  
Igor Veremchuk ◽  
Yuri Grin ◽  
Paul Simon
Keyword(s):  
Electron Beam ◽  
Gas Phase ◽  
Threshold Current ◽  
Threshold Current Density ◽  
Atomic Scale ◽  
In Situ Observation ◽  
Nano Structures ◽  
Transmission Electron ◽  
Initial Crystal

Nano-scaled thermoelectric materials attract significant interest due to their improved physical properties as compared to bulk materials. Well-shaped nanoparticles such as nano-bars and nano-cubes were observed in the known thermoelectric material PbTe. Their extended two-dimensional nano-layer arrangements form directly in situ through electron-beam treatment in the transmission electron microscope. The experiments show the atomistic depletion mechanism of the initial crystal and the recrystallization of PbTe nanoparticles out of the microparticles due to the local atomic-scale transport via the gas phase beyond a threshold current density of the beam.

Photoluminescence Enhancement of CdS Nanocrystals Fabricated on Dithiocarbamate Functionalized PET Substrates

2012 ◽  
Vol 512-515 ◽  
pp. 1511-1515
Author(s):  
Chun Lin Zhao ◽  
Li Xing ◽  
Xiao Hong Liang ◽  
Jun Hui Xiang ◽  
Fu Shi Zhang ◽  
...  
Keyword(s):  
Room Temperature ◽  
Hexagonal Structure ◽  
Diffraction Measurement ◽  
X Ray Diffraction ◽  
Visible Absorption ◽  
X Ray ◽  
Cds Nanocrystals ◽  
Morphological Studies ◽  
Transmission Electron

Cadmium sulfide (CdS) nanocrystals (NCs) were self-assembled and in-situ immobilized on the dithiocarbamate (DTCs)-functionalized polyethylene glycol terephthalate (PET) substrates between the organic (carbon disulfide diffused in n-hexane) –aqueous (ethylenediamine and Cd2+ dissolved in water) interface at room temperature. Powder X-ray diffraction measurement revealed the hexagonal structure of CdS nanocrystals. Morphological studies performed by scanning electron microscopy (SEM) and high-resolution transmission electron microscope (HRTEM) showed the island-like structure of CdS nanocrystals on PET substrates, as well as energy-dispersive X-ray spectroscopy (EDS) confirmed the stoichiometries of CdS nanocrystals. The optical properties of DTCs modified CdS nanocrystals were thoroughly investigated by ultraviolet-visible absorption spectroscopy (UV-vis) and fluorescence spectroscopy. The as-prepared DTCs present intrinsic hydrophobicity and strong affinity for CdS nanocrystals.

In-Situ Study of Ti/TiN Stability under Nitrogen Anneal

1999 ◽  
Vol 564 ◽  
Author(s):  
P. W. DeHaven ◽  
K. P. Rodbell ◽  
L. Gignac
Keyword(s):  
Annealing Temperature ◽  
Time Range ◽  
Second Phase ◽  
Transformation Rate ◽  
Transformation Mechanism ◽  
Second Stage ◽  
Transmission Electron ◽  
Reaction Proceeds ◽  
Two Stages

AbstractThe effectiveness of a TiN capping layer to prevent the conversion of α-titantium to titanium nitride when annealed in a nitrogen ambient has been studied over the temperature range 300–700°C using in-situ high temperature diffraction and transmission electron microscopy. Over the time range of interest (four hours), no evidence of Ti reaction was observed at 300°C. At 450°C. nitrogen was found to diffuse into the Ti to form a Ti(N) solid solution. Above 500°C the titanium is transformed to a second phase: however this reaction follows two different kinetic paths, depending on the annealing temperature. Below 600°C. the reaction proceeds in two stages, with the first stage consisting of Ti(N) formation, and the second stage consisting of the conversion of the Ti(N) with a transformation mechanism characteristic of short range diffusion (grain edge nucleation). Above 600°C, a simple linear transformation rate is observed.

In situ observation of ordering process in FePt films during annealing in a transmission electron microscope

2006 ◽  
Vol 99 (12) ◽  
pp. 123905 ◽  
Author(s):  
K. Kawai ◽  
S. Honda ◽  
M. Nawate ◽  
M. Komatsu ◽  
K. Kawabata
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
In Situ Observation ◽  
Transmission Electron

Crystallization of Amorphous Silicon-Aluminum thin Films: IN-SITU Observation and Thermal Analysis.

1991 ◽  
Vol 237 ◽  
Author(s):  
Toyohiko J. Konno ◽  
Robert Sinclair
Keyword(s):  
Activation Energy ◽  
Amorphous Alloys ◽  
Amorphous Matrix ◽  
In Situ Observation ◽  
Scanning Calorimetry ◽  
Transmission Electron ◽  
High Resolution Tem ◽  
Higher Temperature ◽  
Sputter Deposited

ABSTRACTThe crystallization of sputter-deposited Si/Al amorphous alloys was examined by transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). In-situ high-resolution TEM reveals the existence of an Al layer between the amorphous matrix and the growing crystalline phase. The activation energy for the growth is about 1.2eV, roughly corresponding to the activation energy of Si diffusion in Al. These two observations support the view that a crystallization mechanism, in which an Al buffer layer provides the shortest reaction path, is responsible for the reaction. The product microstructure exhibits secondary crystallization at a higher temperature.

scholarly journals Electron Microscopy Investigation of Magnetization Process in Thin Foils and Nanostructures

2007 ◽  
Vol 1026 ◽  
Author(s):  
Pascale Bayle-Guillemaud ◽  
Aurelien Masseboeuf ◽  
Fabien Cheynis ◽  
Jean-Christophe Toussaint ◽  
Olivier Fruchart ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Magnetic Anisotropy ◽  
Magnetic Induction ◽  
Perpendicular Magnetic Anisotropy ◽  
In Situ Observation ◽  
Magnetic Imaging ◽  
Thin Foils ◽  
Transmission Electron

AbstractThis paper presents investigations of magnetization configuration evolution during in-situ magnetic processes in materials exhibiting planar and perpendicular magnetic anisotropy. Transmission electron microscopy has been used to perform magnetic imaging. Fresnel contrasts in Lorentz Transmission Electron Microscopy (LTEM) and phase retrieval methods such as Transport of Intensity Equation (TIE) solving or electron holography have been implemented. These techniques are sensitive to magnetic induction perpendicular to the electron beam and can give access to a spatially resolved (resolution better than 10 nm) mapping of magnetic induction distribution and could be extended to dynamical studies during in-situ observation. Thin foils of FePd alloys with a strong perpendicular magnetic anisotropy (PMA) and self-assembled Fe dots are presented. Both are studied during magnetization processes exhibiting the capacities of in-situ magnetic imaging in a TEM.

In Situ Observation of Nucleation and Growth of Carbon Nanotubes from Iron Carbide Nanoparticles

2008 ◽  
Vol 1142 ◽  
Author(s):  
Hideto Yoshida ◽  
Seiji Takeda ◽  
Tetsuya Uchiyama ◽  
Hideo Kohno ◽  
Yoshikazu Homma
Keyword(s):  
Carbon Nanotubes ◽  
Iron Carbide ◽  
Bulk Diffusion ◽  
Chemical Vapor ◽  
Nucleation And Growth ◽  
Atomic Scale ◽  
In Situ Observation ◽  
Transmission Electron ◽  
Cvd Growth

ABSTRACTNucleation and growth processes of carbon nanotubes (CNTs) in iron catalyzed chemical vapor deposition (CVD) have been observed by means of in-situ environmental transmission electron microscopy. Our atomic scale observations demonstrate that solid state iron carbide (Fe3C) nanoparticles act as catalyst for the CVD growth of CNTs. Iron carbide nanoparticles are structurally fluctuated in CVD condition. Growth of CNTs can be simply explained by bulk diffusion of carbon atoms since nanoparticles are carbide.

Sign in / Sign up

Export Citation Format

Share Document