Ultrasonic Quantification Of Corroded Surfaces

1997 ◽  
Vol 503 ◽  
Author(s):  
W. M. Mullins ◽  
S. S. Shamachary
Keyword(s):  
Structural Integrity ◽  
Measurement Techniques ◽  
Surface Damage ◽  
Ultrasonic Measurement ◽  
General Corrosion ◽  
Corrosion Attack ◽  
Model Predictions ◽  
Ultrasonic Measurements ◽  
Kinetics Of

ABSTRACTThe surface damage introduced by general corrosion attack of surfaces is considered deleterious to long term structural integrity. As a result, the quantification of this damage represents an interest in the NDE community. In this document, the chemical kinetics of general attack are used to model the morphology of the surface as a function of time of exposure. Timeof- flight ultrasonic data for corroded surfaces are presented which appear to agree with the model predictions. The experimental results are critically reviewed with respect to the practical limitations of the ultrasonic experiments. The effect of exposure on surface morphology and surface stress concentration are shown and related to the classic ultrasonic measurement techniques. The relationships are used to suggest potentially important ultrasonic measurement techniques and to underline the inherent limitations of many classical ultrasonic measurements.

Comparative Labelling and Biokinetic Studies of 99mTc-EDTA(Sn) and 99mTc-DTPA(Sn)

1977 ◽  
Vol 16 (01) ◽  
pp. 30-35 ◽  
Author(s):  
N. Agha ◽  
R. B. R. Persson
Keyword(s):  
Complex Formation ◽  
Significant Influence ◽  
Room Temperature ◽  
Ph Value ◽  
Maximum Activity ◽  
Reduction Step ◽  
Labelling Yield ◽  
Different Temperatures ◽  
Kinetics Of

SummaryGelchromatography column scanning has been used to study the fractions of 99mTc-pertechnetate, 99mTcchelate and reduced hydrolyzed 99mTc in preparations of 99mTc-EDTA(Sn) and 99mTc-DTPA(Sn). The labelling yield of 99mTc-EDTA(Sn) chelate was as high as 90—95% when 100 μmol EDTA · H4 and 0.5 (Amol SnCl2 was incubated with 10 ml 99mTceluate for 30—60 min at room temperature. The study of the influence of the pH-value on the fraction of 99mTc-EDTA shows that pH 2.8—2.9 gave the best labelling yield. In a comparative study of the labelling kinetics of 99mTc-EDTA(Sn) and 99mTc- DTPA(Sn) at different temperatures (7, 22 and 37°C), no significant influence on the reduction step was found. The rate constant for complex formation, however, increased more rapidly with increased temperature for 99mTc-DTPA(Sn). At room temperature only a few minutes was required to achieve a high labelling yield with 99mTc-DTPA(Sn) whereas about 60 min was required for 99mTc-EDTA(Sn). Comparative biokinetic studies in rabbits showed that the maximum activity in kidneys is achieved after 12 min with 99mTc-EDTA(Sn) but already after 6 min with 99mTc-DTPA(Sn). The long-term disappearance of 99mTc-DTPA(Sn) from the kidneys is about five times faster than that for 99mTc-EDTA(Sn).

Kerusakan Pada Material Pipa Air Bersih Akibat General Corrosion

2019 ◽  
Vol 16 (2) ◽  
Author(s):  
M. N. Setia Nusa
Keyword(s):  
Chemical Composition ◽  
Failure Analysis ◽  
External Surface ◽  
Internal Surface ◽  
General Corrosion ◽  
Water Pipe ◽  
Corrosion Attack ◽  
Corrosion Failure ◽  
Environment Factor

Water pipe of 4.5” diameter and has been operated for 8 year having failure due to corrosion attack on its external and internal surface. It is conducted failure analysis to find out the cause of corrosion by having testing examination of visual fractography, metalography,, SEM EDAX, hardness and chemical composition. Testing and examination results show that the failure / corroded pipe has a for in of general corrosion on the external surface due to environment factor or ground factor arround the pipe and on the internal surface was influenced by excessive root weld creating protrude which then causing turbolens and deposite to accelerate corrosion attack.Pipa berdiameter 4.5” yang berfungsi mengalirkan air bersih dan telah beroperasi selama 8 tahun, terjadi kerusakan berbentuk korosi pada permukaan luar pipa dan permukaan dalam. Untuk itu dilakukan analisa kerusakan untuk mengetahui penyebab terjadinya korosi dengan pengujian dan pemeriksaan secara visual,Fractography, Metallography, SEM, EDAX, Uji Kekerasan dan Uji Komposisi Kimia. Hasil pemeriksaan dan pengujian pada pipa yang rusak / korosi berbentuk jenis general korosi pada permukaan luar pipa yang diakibatkan faktor lingkungan atau tanah disekitar pipa, sedangkan pada bagian dalam pipa dipengaruhi oleh adanya lelehan pengelasan yang kurang sempurna sehingga menimbulkan benjolan yang mengakibatkan aliran air didalam pipa tidak lancar sehingga terjadi turbolensi yang menimbulkan endapan dan mengakibatkan percepatan terjadinya korosi.Keywords: Pipe, environtment, turbolens, corrosion, failure

Individual differences in white and grey matter structure associated with verbal habits of thought

2019 ◽  
Author(s):  
Justin C. Hayes ◽  
Katherine L Alfred ◽  
Rachel Pizzie ◽  
Joshua S. Cetron ◽  
David J. M. Kraemer
Keyword(s):  
Individual Differences ◽  
White Matter ◽  
Cognitive Processing ◽  
Grey Matter ◽  
Structural Changes ◽  
Structural Integrity ◽  
Diffusion Tensor ◽  
Self Report ◽  
White Matter Tracts

Modality specific encoding habits account for a significant portion of individual differences reflected in functional activation during cognitive processing. Yet, little is known about how these habits of thought influence long-term structural changes in the brain. Traditionally, habits of thought have been assessed using self-report questionnaires such as the visualizer-verbalizer questionnaire. Here, rather than relying on subjective reports, we measured habits of thought using a novel behavioral task assessing attentional biases toward picture and word stimuli. Hypothesizing that verbal habits of thought are reflected in the structural integrity of white matter tracts and cortical regions of interest, we used diffusion tensor imaging and volumetric analyses to assess this prediction. Using a whole-brain approach, we show that word bias is associated with increased volume in several bilateral language regions, in both white and grey matter parcels. Additionally, connectivity within white matter tracts within an a priori speech production network increased as a function of word bias. These results demonstrate long-term structural and morphological differences associated with verbal habits of thought.

scholarly journals Automated Microscopy: Macro Language Controlling a Confocal Microscope and its External Illumination: Adaptation for Photosynthetic Organisms

2016 ◽  
Vol 22 (2) ◽  
pp. 258-263 ◽  
Author(s):  
Gábor Steinbach ◽  
Radek Kaňa
Keyword(s):  
Light Sources ◽  
Light Conditions ◽  
Photosynthetic Organisms ◽  
Automated Microscopy ◽  
Photosynthetic Microorganisms ◽  
Arduino Microcontroller ◽  
Microscopy Data ◽  
Kinetics Of ◽  
Photosynthetic Cells

AbstractPhotosynthesis research employs several biophysical methods, including the detection of fluorescence. Even though fluorescence is a key method to detect photosynthetic efficiency, it has not been applied/adapted to single-cell confocal microscopy measurements to examine photosynthetic microorganisms. Experiments with photosynthetic cells may require automation to perform a large number of measurements with different parameters, especially concerning light conditions. However, commercial microscopes support custom protocols (throughTime Controlleroffered by Olympus orExperiment Designeroffered by Zeiss) that are often unable to provide special set-ups and connection to external devices (e.g., for irradiation). Our new system combining an Arduino microcontroller with theCell⊕Findersoftware was developed for controlling Olympus FV1000 and FV1200 confocal microscopes and the attached hardware modules. Our software/hardware solution offers (1) a text file-based macro language to control the imaging functions of the microscope; (2) programmable control of several external hardware devices (light sources, thermal controllers, actuators) during imaging via the Arduino microcontroller; (3) theCell⊕Findersoftware with ergonomic user environment, a fast selection method for the biologically important cells and precise positioning feature that reduces unwanted bleaching of the cells by the scanning laser.Cell⊕Findercan be downloaded fromhttp://www.alga.cz/cellfinder. The system was applied to study changes in fluorescence intensity inSynechocystissp. PCC6803 cells under long-term illumination. Thus, we were able to describe the kinetics of phycobilisome decoupling. Microscopy data showed that phycobilisome decoupling appears slowly after long-term (>1 h) exposure to high light.

Long-Term Clinical Effects, Bioavailability, and Kinetics of Minoxidil in Relation to Renal Function

1978 ◽  
Vol 18 (10) ◽  
pp. 500-508 ◽  
Author(s):  
DAVID T. LOWENTHAL ◽  
GADDO ONESTI ◽  
ROBERT MUTTERPERL ◽  
MELTON APFRIME ◽  
EDUARDO W. MARTINEZ ◽  
...  
Keyword(s):  
Renal Function ◽  
Clinical Effects ◽  
Kinetics Of

Phosphorus removal by apatite in horizontal flow constructed wetlands for small communities: pilot and full-scale evidence

2011 ◽  
Vol 63 (8) ◽  
pp. 1629-1637 ◽  
Author(s):  
N. Harouiya ◽  
S. Martin Rue ◽  
S. Prost-Boucle ◽  
A. Liénar ◽  
D. Esser ◽  
...  
Keyword(s):  
Constructed Wetlands ◽  
Particle Surface ◽  
Full Scale ◽  
Retention Capacity ◽  
Small Communities ◽  
Lab Experiments ◽  
Apatite Mineral ◽  
Kinetics Of ◽  
P Removal

Phosphorus (P) removals in constructed wetlands (CWs) have received particular attention in recent decades by using specific materials which promote adsorption/precipitation mechanisms. Recent studies have shown interest in using apatite materials to promote P precipitation onto the particle surface. As previous trials were mainly done by lab experiments, this present study aims to evaluate the real potential of apatites to remove P from wastewater in pilot units and a full-scale plant over a 2 year period. P retention kinetics of two qualities of apatites are presented and discussed. In this work apatite appears to have high retention capacity (>80% of P removal) and is still an interesting way for P removal in CWs for limiting the risk of eutrophication downstream of small communities. Nevertheless, the apatite quality appears to be of great importance for a reliable and long term P removal. The use of materials with low content of apatite mineral (40–50%) seems to be not economically relevant.

Integrity Assessment of a Free-Fall Lifeboat Launched From a FPSO

2015 ◽  
Author(s):  
Guomin Ji ◽  
Nabila Berchiche ◽  
Sébastien Fouques ◽  
Thomas Sauder ◽  
Svein-Arne Reinholdtsen
Keyword(s):  
Finite Element ◽  
Pressure Distribution ◽  
Structural Integrity ◽  
Dynamic Effect ◽  
Sensitivity Study ◽  
Computational Time ◽  
Load Factor ◽  
Time Varying ◽  
Integrity Assessment

The paper addresses the structural integrity assessment of lifeboat launched from floating production, storage and offloading (FPSO) vessels. The study is based on long-term drop lifeboat simulations accounting for more than 50 years of hindcast data of metocean conditions and corresponding FPSO motions. Selection of the load cases and strength analyses with high computational time is a challenge. The load cases analyzed are those corresponding to the 99th percentile of long term distribution of indicators for large slamming loads (CARXZ) or large submergence (Imaxsub). For six selected cases, the time-varying pressure distribution on the lifeboat hull during and after water impact is calculated by CFD simulations using StarCCM+. The finite element model (FEM) of the composite structure of the lifeboat is modelled by ABAQUS. Quasi-static finite element (FE) analyses are performed for the selected load cases. The structural integrity is assessed by the maximum stress and Tsai-Wu failure measure. In the present study, the load and resistance factors are combined and applied to the response. A sensitivity study is performed to investigate the non-linear load/response effects when the load factor is applied to the load. In addition, dynamic analysis is performed with the time-varying pressure distribution for selected case and the dynamic effect is investigated.

CH4 Direct Reduction of In-Flight Fe3O4 Concentrate Particles

2018 ◽  
Vol 14 (1) ◽  
Author(s):  
Bahador Abolpour ◽  
M. Mehdi Afsahi ◽  
Ataallah Soltani Goharrizi
Keyword(s):  
Experimental Data ◽  
Mathematical Model ◽  
Fine Particles ◽  
Direct Reduction ◽  
Constant Heat Flux ◽  
Constant Heat ◽  
Dynamic Motion ◽  
Magnetite Ore ◽  
Model Predictions ◽  
Kinetics Of

Abstract In this study, reduction of in-flight fine particles of magnetite ore concentrate by methane at a constant heat flux has been investigated both experimentally and numerically. A 3D turbulent mathematical model was developed to simulate the dynamic motion of these particles in a methane content reactor and experiments were conducted to evaluate the model. The kinetics of the reaction were obtained using an optimizing method as: [-Ln(1-X)]1/2.91 = 1.02 × 10−2dP−2.07CCH40.16exp(−1.78 × 105/RT)t. The model predictions were compared with the experimental data and the data had an excellent agreement.

Sign in / Sign up

Export Citation Format

Share Document