scholarly journals Fractional Order PI Control in Hybrid Renewable Power Generation System to Three Phase Grid Connection

2020 ◽  
Vol 12 (3) ◽  
pp. 470-493
Author(s):  
Ali Mohamed Yousef ◽  
◽  
Farag K. Abo-Elyousr ◽  
Ahmed Elnozohy ◽  
Moayed Mohamed ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Fractional Order ◽  
Renewable Energy Sources ◽  
Operating Conditions ◽  
Renewable Energy Resources ◽  
Integral Control ◽  
Proportional Integral ◽  
Hybrid Renewable Energy System ◽  
Three Phase ◽  
Fopi Controller

The main objective of this paper is to allow renewable energy sources (RES) to actively participate within hybrid microgrid by proposing a new control system based on fractional order proportional integral (FOPI) controller. Fractional order proportional integral controller is a classical proportional integral (PI) in which the integral part is a fraction instead of integer numbers. The paper introduces a hybrid photovoltaic (PV), wind turbine and battery storage system connected to a three-phase grid. Three types of controller are considered and compared for a hybrid renewable energy system (HRES), namely, FOPI, PI, and the fractional order integral control (FIC). For the PV resource, maximum power point tracking (MPPT) controller was designed using the incremental conductance plus integral regulator technique. A DC/DC boost converter was utilized to connect the renewable energy resources to a point of common coupling. MATLAB/Simulink is adopted to perform the simulation results of the developed HRES. The results show that the FOPI controller outperforms other controllers under several operating conditions. The paper also includes experimental results from a prototype real scale.

Simulation of a Low Voltage Grid with Power Generation from Renewable Energy Resources

2014 ◽  
Vol 918 ◽  
pp. 195-199
Author(s):  
Florin Dragomir ◽  
Otilia Elena Dragomir
Keyword(s):  
Power Generation ◽  
Renewable Energy ◽  
Energy Supply ◽  
Low Voltage ◽  
Renewable Energy Sources ◽  
Energy Resources ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Security Of Supply ◽  
Three Phase

Renewable energy source (RES) enables us to diversify our energy supply. Renewable energy sources are getting more and more widespread, mainly due to the fact that they generate energy by keeping the environment clean. This increases our security of supply and improves European competitiveness creating new industries, jobs, economic growth and export opportunities, whilst also reducing our greenhouse gas emissions. This article proposes a simulation of a three-phase low voltage grid with power generation from photovoltaic sources. The proposed system consists of 192 photovoltaic (PV) panels distributed in 32 rows with each 12 PV panels.

scholarly journals Quasi-Z-Source Four-Leg Inverter with PV by using Model Predictive Control Scheme

2019 ◽  
pp. 73-82
Author(s):  
Konda Ramanaiah ◽  
P. Rajasekhar
Keyword(s):  
Renewable Energy ◽  
Model Predictive Control ◽  
Predictive Control ◽  
Renewable Energy Sources ◽  
Operating Conditions ◽  
Solar Irradiation ◽  
Voltage Source ◽  
Three Phase ◽  
Control Scheme ◽  
Wide Range

The Implementation of Quasi-Z-Source Four-Leg Inverter with PV by using Model Predictive Control Scheme is proposed in this paper. In order to reduce the drawbacks of traditional three phase voltage source inverter (VSI). Photovoltaic (PV) is a term which converts the light into electricity. This topology features a wide range of voltage gain which is suitable for applications in renewable energy-based power systems, where the output of the renewable energy sources varies widely with operating conditions such as wind speed, solar irradiation and temperature. To improve the capability of the controller, an MPC scheme is used which implements a discrete-time model of the system. The controller handles each phase current independently, which adds flexibility to the system. The performance of quasi z source three-phase four-leg VSI with PV by using model predictive control (MPC) was simulated using MATLAB Simulink under balanced and unbalanced load conditions as well as single-phase open-circuit fault condition.

scholarly journals Decentralized Power Generation using Renewable Energy Resources: Scope, Relevance and Application

2019 ◽  
Vol 8 (9) ◽  
pp. 3052-3060
Keyword(s):  
Renewable Energy ◽  
Rural Areas ◽  
Life Cycle Cost ◽  
Electricity Generation ◽  
Renewable Energy Sources ◽  
Energy Resources ◽  
Renewable Energy Resources ◽  
Electricity Cost ◽  
Hybrid Renewable Energy System ◽  
Cost Of Energy

Decentralized energy model successfully helps rural villages when it comes to supply of electricity because it’s a schematic way of utilization of renewable resources with decrease in the amount of GHG emissions whereas national electricity grid does not provide a solution to the problems faced by rural areas. Renewable energy sources can be use as standalone or in a combination of different resources like solar photovoltaic, biogas system, biomass system, micro-hydro and wind turbines known as hybrid renewable energy system (HRES) with a diesel generator as per the load demand and availability of the resources, which also protects our earth by remarkably decreasing the pollution caused by carbon emissions that we produce. The paper presents a review of various case studies on off-grid electricity generation which can be distinguished on the parameters like Cost of energy (COE), Net present cost (NPC), Levelized cost of energy (LCOE), Levelized unit electricity cost (LUEC), Per unit electricity cost (PUEC) and Life cycle cost (LCC) with respect to grid-connected systems and extension of grid. The paper also details the different initiatives taken by the government of Rajasthan to encourage off-grid generation in Rajasthan. The main motive of this work is to present an efficient hybrid technology combination from a blend of renewable energy resources for electricity generation to meet the electrical need of an off-grid village which is cost-efficient, sustainable, techno-economically feasible and environment friendly

Modeling an Energy Storage System Based on a Hybrid Renewable Energy System in Stand-alone Applications

2017 ◽  
Vol 68 (11) ◽  
pp. 2641-2645
Author(s):  
Alexandru Ciocan ◽  
Ovidiu Mihai Balan ◽  
Mihaela Ramona Buga ◽  
Tudor Prisecaru ◽  
Mohand Tazerout
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Compressed Air ◽  
Energy Sources ◽  
Energy Storage Systems ◽  
Hybrid Renewable Energy System

The current paper presents an energy storage system that stores the excessive energy, provided by a hybrid system of renewable energy sources, in the form of compressed air and thermal heat. Using energy storage systems together with renewable energy sources represents a major challenge that could ensure the transition to a viable economic future and a decarbonized economy. Thermodynamic calculations are conducted to investigate the performance of such systems by using Matlab simulation tools. The results indicate the values of primary and global efficiencies for various operating scenarios for the energy storage systems which use compressed air as medium storage, and shows that these could be very effective systems, proving the possibility to supply to the final user three types of energy: electricity, heat and cold function of his needs.

scholarly journals Techno-Economic Analysis of a Novel Hydrogen-Based Hybrid Renewable Energy System for Both Grid-Tied and Off-Grid Power Supply in Japan: The Case of Fukushima Prefecture

2020 ◽  
Vol 10 (12) ◽  
pp. 4061 ◽  
Author(s):  
Naoto Takatsu ◽  
Hooman Farzaneh
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Economic Assessment ◽  
Energy System ◽  
Modeling Framework ◽  
Integrated Simulation ◽  
Hybrid Renewable Energy System ◽  
Renewable Energy System ◽  
Hybrid Renewable Energy

After the Great East Japan Earthquake, energy security and vulnerability have become critical issues facing the Japanese energy system. The integration of renewable energy sources to meet specific regional energy demand is a promising scenario to overcome these challenges. To this aim, this paper proposes a novel hydrogen-based hybrid renewable energy system (HRES), in which hydrogen fuel can be produced using both the methods of solar electrolysis and supercritical water gasification (SCWG) of biomass feedstock. The produced hydrogen is considered to function as an energy storage medium by storing renewable energy until the fuel cell converts it to electricity. The proposed HRES is used to meet the electricity demand load requirements for a typical household in a selected residential area located in Shinchi-machi in Fukuoka prefecture, Japan. The techno-economic assessment of deploying the proposed systems was conducted, using an integrated simulation-optimization modeling framework, considering two scenarios: (1) minimization of the total cost of the system in an off-grid mode and (2) maximization of the total profit obtained from using renewable electricity and selling surplus solar electricity to the grid, considering the feed-in-tariff (FiT) scheme in a grid-tied mode. As indicated by the model results, the proposed HRES can generate about 47.3 MWh of electricity in all scenarios, which is needed to meet the external load requirement in the selected study area. The levelized cost of energy (LCOE) of the system in scenarios 1 and 2 was estimated at 55.92 JPY/kWh and 56.47 JPY/kWh, respectively.

Analysing integration issues of the microgrid system with utility grid network

2021 ◽  
Vol 22 (1) ◽  
pp. 113-127
Author(s):  
Mulualem Tesfaye ◽  
Baseem Khan ◽  
Om Prakash Mahela ◽  
Hassan Haes Alhelou ◽  
Neeraj Gupta ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Distribution System ◽  
Reactive Power ◽  
Renewable Energy Sources ◽  
Operating Conditions ◽  
Control Mode ◽  
Voltage Source ◽  
Modulation Scheme ◽  
Main Challenge ◽  
Utility Grid

Abstract Generation of renewable energy sources and their interfacing to the main system has turn out to be most fascinating challenge. Renewable energy generation requires stable and reliable incorporation of energy to the low or medium voltage networks. This paper presents the microgrid modeling as an alternative and feasible power supply for Institute of Technology, Hawassa University, Ethiopia. This microgrid consists of a 60 kW photo voltaic (PV) and a 20 kW wind turbine (WT) system; that is linked to the electrical distribution system of the campus by a 3-phase pulse width modulation scheme based voltage source inverters (VSI) and supplying power to the university buildings. The main challenge in this work is related to the interconnection of microgrid with utility grid, using 3-phase VSI controller. The PV and WT of the microgrid are controlled in active and reactive power (PQ) control mode during grid connected operation and in voltage/frequency (V/F) control mode, when the microgrid is switched to the stand-alone operation. To demonstrate the feasibility of proposed microgrid model, MATLAB/Simulink software has been employed. The performance of fully functioning microgrid is analyzed and simulated for a number of operating conditions. Simulation results supported the usefulness of developed microgrid in both mode of operation.

scholarly journals Scalable Multiport Converter Structure for Easy Grid Integration of Alternate Energy Sources for Generation of Isolated Voltage Sources for MMC

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1779
Author(s):  
Syed Rahman ◽  
Irfan Khan ◽  
Khaliqur Rahman ◽  
Sattam Al Otaibi ◽  
Hend I. Alkhammash ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Energy Resources ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Component Level ◽  
Storage Devices ◽  
Multiport Converter ◽  
Detailed Simulation ◽  
The Individual

This paper presents a novel, scalable, and modular multiport power electronic topology for the integration of multiple resources. This converter is not only scalable in terms of the integration of multiple renewable energy resources (RES) and storage devices (SDs) but is also scalable in terms of output ports. Multiple dc outputs of a converter are designed to serve as input to the stacking modules (SMs) of the modular multilevel converter (MMC). The proposed multiport converter is bidirectional in nature and superior in terms of functionality in a way that a modular universal converter is responsible for the integration of multiple RES/SDs and regulates multiple dc output ports for SMs of MMC. All input ports can be easily integrated (and controlled), and output ports also can be controlled independently in response to any load variations. An isolated active half-bridge converter with multiple secondaries acts as a central hub for power processing with multiple renewable energy resources that are integrated at the primary side. To verify the proposed converter, a detailed design of the converter-based system is presented along with the proposed control algorithm for managing power on the individual component level. Additionally, different modes of power management (emulating the availability/variability of renewable energy sources (RES)) are exhibited and analyzed here. Finally, detailed simulation results are presented in detail for the validation of the proposed concepts and design process.

scholarly journals Emergence of blockchain-technology application in peer-to-peer electrical-energy trading: a review

Clean Energy ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 104-123
Author(s):  
Manish Kumar Thukral
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Research Work ◽  
Energy Sector ◽  
Peer To Peer ◽  
Renewable Energy Resources ◽  
Energy Trading ◽  
Technology Application ◽  
Blockchain Technology ◽  
The Common

Abstract Renewable-energy resources require overwhelming adoption by the common masses for safeguarding the environment from pollution. In this context, the prosumer is an important emerging concept. A prosumer in simple terms is the one who consumes as well as produces electricity and sells it either to the grid or to a neighbour. In the present scenario, peer-to-peer (P2P) energy trading is gaining momentum as a new vista of research that is viewed as a possible way for prosumers to sell energy to neighbours. Enabling P2P energy trading is the only method of making renewable-energy sources popular among the common masses. For making P2P energy trading successful, blockchain technology is sparking considerable interest among researchers. Combined with smart contracts, a blockchain provides secure tamper-proof records of transactions that are recorded in distributed ledgers that are immutable. This paper explores, using a thorough review of recently published research work, how the existing power sector is reshaping in the direction of P2P energy trading with the application of blockchain technology. Various challenges that are being faced by researchers in the implementation of blockchain technology in the energy sector are discussed. Further, this paper presents different start-ups that have emerged in the energy-sector domain that are using blockchain technology. To give insight into the application of blockchain technology in the energy sector, a case of the application of blockchain technology in P2P trading in electrical-vehicle charging is discussed. At the end, some possible areas of research in the application of blockchain technology in the energy sector are discussed.

scholarly journals Fuzzy Controller Applied to a Remote Energy Harvesting Emulation Platform

Sensors ◽  
2020 ◽  
Vol 20 (20) ◽  
pp. 5874 ◽  
Author(s):  
Marcelo Miranda Camboim ◽  
Juan Moises Maurício Villanueva ◽  
Cleonilson Protasio de Souza
Keyword(s):  
Renewable Energy ◽  
Energy Harvesting ◽  
Renewable Energy Sources ◽  
Setting Time ◽  
Pi Controller ◽  
Step Response ◽  
Energy Sources ◽  
Thermal Source ◽  
Proportional Integral ◽  
Thermal Pattern

In the last decades, a lot of effort has been made in order to improve the use of environmentally friendly and renewable energy sources. In a context of small energy usage, energy harvesting takes place and thermal energy sources are one of its main energy sources because there are several unused heat sources available in the environment that may be used as renewable energy sources. To rapidly evaluate the energy potential of such thermal sources is a hard task, therefore, a way to perform this is welcome. In this work, a thermal pattern emulation system to evaluate potential thermal source in a easy way is proposed. The main characteristics of the proposed system is that it is online and remote, that is, while the thermal-source-under-test is being measured, the system is emulating it and evaluating the generated energy remotely. The main contribution of this work was to replace the conventional Proportional Integral Derivative (PID) controller to a Fuzzy-Proportional Integral (PI) controller. In order to compare both controllers, three tests were carried out, namely: (a) step response, (b) perturbation test, (c) thermal emulation of the thermal pattern obtained from a potential thermal source: tree trucks. Experimental results show that the Fuzzy-PI controller was faster than the PID, achieving a setting time 41.26% faster, and also was more efficient with a maximum error 53% smaller than the PID.

scholarly journals TECHNO-ECONOMIC ANALYSIS OF AN OFF-GRID HYBRID ENERGY SYSTEM WITH HOMER PRO

2021 ◽  
Vol 5 (3) ◽  
pp. 56-61
Author(s):  
Ahmet Erhan AKAN
Keyword(s):  
Renewable Energy ◽  
Solar Energy ◽  
Economic Analysis ◽  
Energy Conversion ◽  
Renewable Energy Sources ◽  
Lithium Ion ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Energy Potential ◽  
Economic Point

The decrease in fossil-based energy sources and increasing environmental problems increase the tendency to renewable energy sources day by day. The potential of renewable energy sources differs according to the region where the energy will be produced. For this reason, it is crucial to conduct a good feasibility study that deals with the selected systems from a technical and economic point of view before making an investment decision on energy conversion systems based on renewable energy sources. In this study, the most suitable equipment and capacities were investigated by examining the techno-economic analysis of a hybrid system created with wind-solar renewable energies for a detached house, which is considered off-grid, in a rural area of Tekirdağ province (40o58.7ı N, 27o30.7ı E). Investigations were carried out using the HOMER Pro (Hybrid Optimization Model for Electric Renewable) program. The wind and solar energy potential of Tekirdağ province were obtained from the NASA renewable energy resources database added to the HOMER Pro program. The daily electricity requirement of the sample house was chosen as 11.27 kWh, and the current peak electrical load was chosen as 2.39 kW. A wind turbine is connected to the AC busbars, solar collectors and battery group connected to the DC busbars, and a converter that converts energy between AC and DC busbars in the energy conversion system. In order to determine the optimum capacities of the system elements, 27486 different simulations were performed by HOMER Pro. The selection of the most suitable system among these was determined according to the lowest net present cost (NPC) value. In addition, the energy production capacities that will occur in the case of different wind speeds were also investigated. Accordingly, the system to be installed with a solar panel with a capacity of 6.25 kW, PV-MPPT with a capacity of 1 kW, 2 wind turbines with a capacity of 1 kW, 8 Lithium-ion batteries with a capacity of 6V-167 Ah, and a converter with a capacity of 2.5 kW has been determined will generate electrical energy of 5433 kWh per year. In addition, it has been determined that 61.8% of this produced energy will be obtained from solar energy and 38.2% from wind energy, and the simple payback period of the investment will be 14 years. It is thought that this study will provide valuable information to researchers and investors.

Sign in / Sign up

Export Citation Format

Share Document