State of the Art of Teleoperated Energy Harvesting Systems for Small Hydropower Plants

2019 ◽  
Vol 14 (3) ◽  
pp. 182
Author(s):  
John Alexander Camacho ◽  
Cristian David Chamorro ◽  
Nayiver Gladys Caicedo
2019 ◽  
Vol 12 (41) ◽  
pp. 1-6
Author(s):  
Rahul Yadav ◽  
Ayush Goel ◽  
Ayush Goel ◽  
Shruti Vashist ◽  
Mohit Verma

2016 ◽  
Vol 23 (4) ◽  
pp. 495-512 ◽  
Author(s):  
Bogdan Dziadak ◽  
Łukasz Makowski ◽  
Andrzej Michalski

Abstract Wireless Sensor Networks (WSNs) have existed for many years and had assimilated many interesting innovations. Advances in electronics, radio transceivers, processes of IC manufacturing and development of algorithms for operation of such networks now enable creating energy-efficient devices that provide practical levels of performance and a sufficient number of features. Environmental monitoring is one of the areas in which WSNs can be successfully used. At the same time this is a field where devices must either bring their own power reservoir, such as a battery, or scavenge energy locally from some natural phenomena. Improving the efficiency of energy harvesting methods reduces complexity of WSN structures. This survey is based on practical examples from the real world and provides an overview of state-of-the-art methods and techniques that are used to create energyefficient WSNs with energy harvesting.


2021 ◽  
Vol 13 (11) ◽  
pp. 5893
Author(s):  
Diogo Correia ◽  
Adelino Ferreira

Society is dependent on transport systems, not only to meet its daily needs with short journeys but also to meet their arising needs with longer distances. The ability to connect remote regions and the trip duration makes the aircraft a mode of transport for distant travel. However, it impacts greenhouse gas production. The survey for new ways to reduce greenhouse gas emissions emerges from the contribution of energy harvesting systems. Energy harvesting technology has been presenting prosperous solutions and applications in road pavements. Due to the similarity between road pavements, this paper addresses state-of-the-art technologies for airport pavements and road pavements, aiming to analyze which ones can be developed for application in airport pavements. An analysis is presented not only for the density, efficiency, and energy generation, but also for each energy harvesting technology’s implementation and technology readiness level. The photovoltaic technology, to be incorporated into airport pavements, will allow sustainable energy generation dependent on the airport location. The hydraulic/pneumatic technology, to be incorporated into the airport pavements, will generate electrical energy based on aircraft movement.


2021 ◽  
Vol 147 ◽  
pp. 111230
Author(s):  
Katrina Calautit ◽  
Diana S.N.M. Nasir ◽  
Ben Richard Hughes

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2336 ◽  
Author(s):  
Doaa Al-Yafeai ◽  
Tariq Darabseh ◽  
Abdel-Hamid I. Mourad

One of the most important techniques for energy harvesting is the clean energy collection from the ambient vibration. Piezoelectric energy harvesting systems became a hot topic in the literature and attracted most researchers. The reason behind this attraction is that piezoelectric materials are a simple structure and provide a higher power density among other mechanisms (electromagnetic and electrostatic). The aim of this manuscript is to succinctly review and present the state of the art of different existing vibrational applications utilizing piezoelectric energy harvesting technique. Meanwhile, the main concentration is harvesting energy from a vehicle suspension system. There is a significant amount of dissipated energy from the suspension dampers that is worthy of being harvested. Different mathematical car models with their experimental setup are presented, discussed, and compared. The piezoelectric material can be mounted in different locations such as suspension springs, dampers, and tires. The technique of implementing the harvester and the amount of power harvested from each location are analyzed. The evaluation of the electrical harvesting circuits and different storage devices for the harvested power are also discussed. The paper will also shed light on the variety of potential applications of the harvested energy.


Author(s):  
Achille Fumtchum* ◽  
Pierre Tsafack ◽  
Emmanuel Tanyi ◽  
Florin Hutu ◽  
Guillaume Villemaud

The aim of this work is, on one hand, to review the state of the art of the architectures and diodes used in radio-frequency energy harvesting systems, the idea here is to review the most recent works, as well as their characteristics, which include frequency, type of diode used, topology, maximum efficiency and corresponding power, and on the other hand to carry out simulations to determine the most appropriate case for any further work in the field. After having determined the most common topologies, we used the main known radio-frequency diodes to characterize them in a first step, clearly a process of comparing the results of the simulations of the different topologies is done by initially considering an identical frequency. and afterward determine the effect of frequency band on their conversion efficiency.


2020 ◽  
Vol 64 (1-4) ◽  
pp. 439-446
Author(s):  
Gildas Diguet ◽  
Gael Sebald ◽  
Masami Nakano ◽  
Mickaël Lallart ◽  
Jean-Yves Cavaillé

Magneto Rheological Elastomers (MREs) are composite materials based on an elastomer filled by magnetic particles. Anisotropic MRE can be easily manufactured by curing the material under homogeneous magnetic field which creates column of particles. The magnetic and elastic properties are actually coupled making these MREs suitable for energy conversion. From these remarkable properties, an energy harvesting device is considered through the application of a DC bias magnetic induction on two MREs as a metal piece is applying an AC shear strain on them. Such strain therefore changes the permeabilities of the elastomers, hence generating an AC magnetic induction which can be converted into AC electrical signal with the help of a coil. The device is simulated with a Finite Element Method software to examine the effect of the MRE parameters, the DC bias magnetic induction and applied shear strain (amplitude and frequency) on the resulting electrical signal.


Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 266
Author(s):  
Md Rakibuzzaman ◽  
Sang-Ho Suh ◽  
Hyoung-Ho Kim ◽  
Youngtae Ryu ◽  
Kyung Yup Kim

Discharge water from fish farms is a clean, renewable, and abundant energy source that has been used to obtain renewable energy via small hydropower plants. Small hydropower plants may be installed at offshore fish farms where suitable water is obtained throughout the year. It is necessary to meet the challenges of developing small hydropower systems, including sustainability and turbine efficiency. The main objective of this study was to investigate the possibility of constructing a small hydropower plant and develop 100 kW class propeller-type turbines in a fish farm with a permanent magnet synchronous generator (PMSG). The turbine was optimized using a computer simulation, and an experiment was conducted to obtain performance data. Simulation results were then validated with experimental results. Results revealed that streamlining the designed shape of the guide vane reduced the flow separation and improved the efficiency of the turbine. Optimizing the shape of the runner vane decreased the flow rate, reducing the water power and increasing the efficiency by about 5.57%. Also, results revealed that tubular or cross-flow turbines could be suitable for use in fish farm power plants, and the generator used should be waterproofed to avoid exposure to seawater.


Water ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 433
Author(s):  
Laima Česonienė ◽  
Midona Dapkienė ◽  
Petras Punys

Hydropower plants produce renewable and sustainable energy but affect the river’s physico-chemical characteristics and change the abundance and composition of the aquatic organisms. The impact of large HPPs on the ecological conditions of surface water bodies have been extensively studied, but less attention has been paid to environmental impact studies of small hydropower plants (SHPs). The impact of hydropeaking on both the river flow regime and ecosystems has been well-studied for peaking mode plants, mainly medium to large-sized ones. However, for small hydroelectric power plants, and especially for those in lowland rivers, the available information on water quality, benthic macroinvertebrates communities and fish abundance, and biomass is not sufficient. Ten small hydropower plants were selected, and the ecological status of water bodies was assessed in different parts of Lithuania. The studies were performed at the riverbed upstream from the SHPs, where the hydrological regime has not changed, and downstream from the SHPs. It was found that the small hydropower plants do not affect the physico-chemical values of the water quality indicators. This study demonstrated that the total number of benthic macroinvertebrates taxa (TS) is influenced by the concentration of nitrogen and suspended solids, the water flow, the river area, and the current speed; the number of EPT (Ephemeroptera (mayflies), Plecoptera (stoneflies), and Trichoptera (caddisflies)) taxa is influenced by the concentration of nitrogen and suspended solids. The studied indicators do not have a significant impact on biomass. The SHPs affect the fish abundance and biomass. The Lithuanian fish index (LFI) is influenced by the average depth and area of the river. Some SHPs operating in lowland areas may yield somewhat significant hydrograph ramping but more detailed investigation is needed to support the significance of this impact on the biological indices.


Sign in / Sign up

Export Citation Format

Share Document