scholarly journals Effect of Cleanser Solutions on the Retention Force of O’ring Attachment: An in Vitro Study

2020 ◽  
Vol 31 (6) ◽  
pp. 657-663
Author(s):  
Daniela Nair Borges Felipucci ◽  
Patricia Almeida Curylofo ◽  
Luciana Costa Crizóstomo ◽  
Luis Geraldo Vaz ◽  
Suleima do Vale Alves ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Surface Damage ◽  
Significant Loss ◽  
Deionized Water ◽  
Retention Force ◽  
Bonferroni Adjustment ◽  
Significant Difference ◽  
The Times ◽  
Adjustment Test

Abstract The aim of this study was to evaluate the effect of cleaning solutions on the retention force of o-ring-type overdenture attachments. The effect of four solutions on nitrile rings were evaluated: Cepacol (C), Cepacol with fluoride (CF), Listerine (L) and 0.05% sodium hypochlorite (SH); deionized water (DW) was used as a control. Matrices containing two implants and abutments and acrylic specimens with the metal capsules were obtained and divided into the groups. A simulation of 90 overnight immersions (8 h) was performed, and the tensile strength value was obtained at the beginning (T0) and in every 30 days (T1, T2 and T3) (n=6). In order to analyze o-ring surface damage after the immersions, a scanning electron microscopy (SEM) was used (n=1). For statistical analysis of the results, analysis of variance (ANOVA) and multiple comparisons with Bonferroni adjustment (test power=1.000; a=0.05) were used. There was a significant difference for the factors time (p<0.001), solution (p<0.001) and for the interaction time × solution (p<0.001). Considering the times of each solution, only for DW there was no significant loss of retention over time. Comparing the solutions in each moment, there was no difference among the solutions in T0. From T1, CF and SH provided less retention than DW (p<0.005). Through SEM it was possible to observe changes in the surface of the CF and SH nitrile o-rings. CF and SH should be avoided due to deleterious action in o-rings.

scholarly journals Comparative Analysis of the Stability of Prosthetic Screws under Cyclic Loading in Implant Prosthodontics: An In Vitro Study

2020 ◽  
Author(s):  
Santo Catapano ◽  
Mattia Ferrari ◽  
Nicola Mobilio ◽  
Marco Montanari ◽  
Massimo Corsalini ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Significant Loss ◽  
Fixed Number ◽  
Edentulous Mandible ◽  
Significant Difference ◽  
Rehabilitation Model ◽  
Hybrid Prosthesis ◽  
Anchoring System ◽  
Torque Values

Background: To compare the loss of preload in absence of loading and after a fixed number of ideal masticatory cycles in two different connection systems using all-on-four prosthetic model. Methods: Two equal models of an edentulous mandible rehabilitated with all-on-four technique with two types of abutment system (MUA and OT-Bridge) supporting a hybrid prosthesis, were used. Initial torque values of the prosthetic fixing screw, after ten minutes from initial screw tightening and after 400000 masticatory cycles were registered using a mechanical torque gauge. Differences between initial and final torque values were reported for each anchoring system and the two systems were finally compared. Results: No statistically significant differences regarding the loss of preload between MUA and OT-Bridge system were found after 400000 masticatory cycles; however, in MUA system it was found between anterior and posterior implant screws. A significant difference in preload loss was found only for MUA system comparing the initial screw torque to that measured after 10 minutes from the tightening in absence of cyclic loadings. Conclusions: MUA and OT-Bridge are reliable prosthetic anchoring systems able to tolerate repeated masticatory cycles also on distal cantilever in all-on-four rehabilitation model without any significant loss of preload in screw tightening

scholarly journals Comparative Analysis of the Stability of Prosthetic Screws under Cyclic Loading in Implant Prosthodontics: An In Vitro Study

2021 ◽  
Vol 11 (2) ◽  
pp. 622
Author(s):  
Santo Catapano ◽  
Mattia Ferrari ◽  
Nicola Mobilio ◽  
Marco Montanari ◽  
Massimo Corsalini ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Significant Loss ◽  
Fixed Number ◽  
Edentulous Mandible ◽  
Significant Difference ◽  
Rehabilitation Model ◽  
Hybrid Prosthesis ◽  
Anchoring System ◽  
Torque Values

Background: To compare the loss of preload in absence of loading and after a fixed number of cyclic loadings on 7-mm distal cantilever in two different connection systems using all-on-four prosthetic model. Methods: Two equal models of an edentulous mandible rehabilitated with all-on-four technique with two types of abutment system (MUA and OT-Bridge) supporting a hybrid prosthesis, were used. Initial torque values of the prosthetic fixing screw, after ten minutes from initial screw tightening and after 400,000 repeated loadings were registered using a mechanical torque gauge. Differences between initial and final torque values were reported for each anchoring system and the two systems were finally compared. Results: No statistically significant differences regarding the loss of preload between MUA and OT-Bridge system were found after 400,000 cyclic loadings; however, in MUA system it was found between anterior and posterior implant screws. A significant difference in preload loss was found only for MUA system comparing the initial screw torque to that measured after 10 min from the tightening in absence of cyclic loadings. Conclusions: Within the limits of the present study, MUA and OT-Bridge may be considered reliable prosthetic anchoring systems able to tolerate repeated cyclic occlusal loads on distal cantilever in all-on-four rehabilitation model without any significant loss of preload in screw tightening.

scholarly journals Effect of CPP-ACP on enamel eroded extrinsically: in vitro study

2018 ◽  
Vol 66 (1) ◽  
pp. 21-28
Author(s):  
Iandara de Lima SCARDINI ◽  
Marcella Kretli Neves DIAS ◽  
Martha Chiabai Cupertino de CASTRO ◽  
Ana Paula Albuquerque GUEDES ◽  
Letícia Monteiro PEIXOTO
Keyword(s):  
Citric Acid ◽  
Tooth Enamel ◽  
Artificial Saliva ◽  
In Vitro Study ◽  
Deionized Water ◽  
Statistical Testing ◽  
Immersion Medium ◽  
Significant Difference ◽  
Before And After

ABSTRACT Objective: The aim of this study was to evaluate the remineralization effect of CPP-ACP on tooth enamel that is eroded extrinsically. Methods: Sixty freshly extracted bovine teeth were stored in a solution of thymol (0.1%), cut into enamel blocks (6x6mm), abraded with silicon carbide sandpaper (600, 800 and 1200 grit) and polished with felt. The specimens were randomly divided into 4 groups (n=15), varying the immersion medium , deionized water or citric acid, and the optional use of CPP-ACP. (G1: deionized water; G2: citric acid; G3: deionized water + CPP-ACP; G4: citric acid + CPP-ACP). The samples were subjected to 4 cycles of erosion every day, comprising 5 minutes immersion in one medium and 2 hours of immersion in artificial saliva, for 5 consecutive days. After each erosive cycle, 20 uL of the MI Paste was applied for 5 minutes on one half of the samples and washed with deionized water. Before and after the erosive cycling, the measurements of Vickers hardness and surface roughness were taken. Results: The results were evaluated through statistical testing. The final hardness and roughness values showed no statistically significant difference between G2 and G4. The paste in G4 did not promote an increase in hardness values nor a decrease in roughness values. Conclusion: It was concluded that CPP-ACP was unable to remineralize enamel subjected to extrinsic erosion, being ineffective in preventing erosion of enamel and in the remineralization of the eroded enamel.

Comparative Study to Evaluate the Surface Detail Reproduction of Dental Stone after Immersion in Various Different Disinfectant Solutions, Under Stereomicroscope 10 X Magnification –An In-Vitro Study

2017 ◽  
Vol 9 (3) ◽  
Author(s):  
Rathika Rai ◽  
M. A. Easwaran ◽  
K. T. Dhivya
Keyword(s):  
Sodium Hypochlorite ◽  
In Vitro Study ◽  
Control Group ◽  
Immersion Method ◽  
Significant Difference ◽  
Surface Irregularities ◽  
Disinfectant Solution ◽  
Surface Detail ◽  
Group B

Aim: To evaluate the surface detail reproduction of dental stone this is immersed in different disinfectant solution and studied under stereomicroscope. Methodology: Total number of 30 specimens of dental stone (Type III) were made with measurements of 1.5cm diameter and 1cm height .This samples are divided in to 3 groups group A,B,C. were A is immersed in Distilled water which was taken as control group ;B is immersed in 2% Glutaraldehyde and C is immersed in 5%sodium hypochlorite. Each specimen were immersed in the disinfectant solution for 15 minutes and dried under room temperature for 24 hrs. After 24 hrs each specimens are studied under stereomicroscope for surface details. Result: The results showed no significant difference in the surface irregularities and porosities for a group 1 and group 2 except group 3 which showed significant increase in the porosities, surface irregularities and erosions after disinfection with 5% NaHOCl by immersion method. Conclusion: The surface detail reproduction capacity of die stone was adversely affected when 5% Sodium hypochlorite was used as disinfectant solution when compare d to control group and 2% Glutaraldehyde

scholarly journals Marginal and Internal Fit of Ceramic Prostheses Fabricated from Different Chairside CAD/CAM Systems: An In Vitro Study

2021 ◽  
Vol 11 (2) ◽  
pp. 857
Author(s):  
Keunbada Son ◽  
Kyu-Bok Lee
Keyword(s):  
Computer Aided Design ◽  
In Vitro Study ◽  
Vitro Study ◽  
Marginal Gap ◽  
Significant Difference ◽  
Cad Cam ◽  
Ceramic Crowns ◽  
Internal Fit ◽  
Cam Systems

The purpose of this in vitro study was to evaluate marginal and internal fits of ceramic crowns fabricated with chairside computer-aided design and manufacturing (CAD/CAM) systems. An experimental model based on ISO 12836:2015 was digitally scanned with different intraoral scanners (Omnicam (CEREC), EZIS PO (DDS), and CS3500 (Carestream)). Ceramic crowns were fabricated using the CAD/CAM process recommended by each system (CEREC, EZIS, and Carestream systems; N = 15). The 3-dimensional (3D) marginal and internal fit of each ceramic crown was measured using a 3D inspection software (Geomagic control X). Differences among the systems and various measurements were evaluated using the Kruskal–Wallis test. Statistically significant differences were validated using pairwise comparisons (α = 0.05). Occlusal gaps in the CEREC, EZIS, and Carestream groups were 113.0, 161.3, and 438.2 µm, respectively (p < 0.001). The axial gaps were 83.4, 78.0, and 107.9 µm, respectively. The marginal gaps were 77.8, 99.3, and 60.6 µm, respectively, and the whole gaps were 85.9, 107.3, and 214.0 µm, respectively. Significant differences were observed with the EZIS system compared with the other two systems in terms of the marginal gap sizes. The CEREC system showed no significant differences among the four measured regions. However, the EZIS and Carestream systems did show a statistically significant difference (p < 0.05). All three systems were judged to be capable of fabricating clinically acceptable prostheses, because the marginal gap, which is the most important factor in the marginal fit of prostheses, was recorded to be below 100 µm in all three systems.

scholarly journals In vitro study of human osteoblast proliferation and morphology on orthodontic mini-implants

2015 ◽  
Vol 85 (6) ◽  
pp. 920-926 ◽  
Author(s):  
Ricardo Carvalho Bueno ◽  
Roberta Tarkany Basting
Keyword(s):  
Chemical Composition ◽  
In Vitro Study ◽  
Chemical Components ◽  
Control Group ◽  
Osteoblast Proliferation ◽  
Mini Implants ◽  
Significant Difference ◽  
Implant Anchorage ◽  
Positive Effect

ABSTRACT Objective:  To evaluate the proliferation and morphology of human osteoblasts cultured on two brands of mini-implants after 24, 48, and 72 hours, in addition to the chemical composition found on their surface. Materials and Methods:  Two brands of mini-implant (Morelli and Neodent) were evaluated; polystyrene was used as a control group (n  =  3). Osteoblasts were cultured on the surface of sterilized mini-implants in a CO2 incubator at different time periods (24, 48, and 72 hours). Osteoblast proliferation was quantified by scanning electron microscopy using up to 5000× magnification, and cell morphology was analyzed by a single observer. For the chemical analysis, spectroscopy X-ray fluorescence was used to identify and quantify chemical components on the surface of the mini-implants. Results:  Two-way ANOVA showed no significant interaction between the factors studied (P  =  0.686). A Tukey test revealed no significant difference in osteoblast proliferation between the mini-implants at all studied periods; however, a difference in cell proliferation was detected between the Neodent and the control group (P  =  .025). For all groups, time had a direct and positive effect on osteoblast proliferation (P &lt; .001). The significant elements present in both brands of mini-implants were titanium, aluminum, vanadium, and iron. Conclusions:  Osteoblast proliferation was present on the mini-implants studied, which increased over time; however, no significant difference between brands was observed. No difference was seen between the mini-implants evaluated in terms of chemical composition. Cell adhesion after 72 hours suggests that areas of bone remodeling can be achieved, thus initiating the process of mini-implant anchorage.

A novel intracranial exchange guidewire improves the navigation of various endovascular devices: An in vitro study of challenging situations

2021 ◽  
pp. 159101992110573
Author(s):  
Naoki Kaneko ◽  
Ariel Takayanagi ◽  
Hamidreza Saber ◽  
Lea Guo ◽  
Satoshi Tateshima
Keyword(s):  
Giant Aneurysm ◽  
In Vitro Study ◽  
Target Vessel ◽  
Success Rates ◽  
Intracranial Stenting ◽  
Aneurysm Neck ◽  
Significant Difference ◽  
Aneurysm Model ◽  
Endovascular Devices

Objective Neuroendovascular procedures rely on successful navigation and stable access to the target vessel. The Stabilizer is a 300 cm long exchange wire with a 0.014 diameter and a soft, flexible stent at the distal end designed to assist with navigation and device delivery. This study aims to assess the efficacy of the Stabilizer for navigation in a variety of challenging environments. Methods The efficacy of the Stabilizer was evaluated using three challenging vascular models: a giant aneurysm model, a severe tortuosity model, and an M1 stenosis model. The Stabilizer was compared with a conventional wire during navigation in each model. Results In the giant aneurysm model, there was no significant difference of success during straightening of a looped wire and significantly higher success rates when advancing an intermediate catheter with the Stabilizer beyond the aneurysm neck compared to a conventional guidewire. The Stabilizer also significantly increased success rates when advancing an intermediate catheter through a model with severe tortuosity compared to a conventional guidewire, as well as exchange maneuver for intracranial stenting in a stenosis model compared to an exchange wire. Conclusions In our experimental model, the Stabilizer significantly improved navigation and device delivery in a variety of challenging settings compared to conventional wires.

scholarly journals The Antibacterial Efficacy of Biopure MTAD in Root Canal Contaminated with Enterococcus faecalis

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Blerim Kamberi ◽  
Donika Bajrami ◽  
Miranda Stavileci ◽  
Shuhreta Omeragiq ◽  
Fatmir Dragidella ◽  
...  
Keyword(s):  
In Vitro Study ◽  
Sodium Hypochlorite Solution ◽  
Antibacterial Efficacy ◽  
Human Teeth ◽  
Exact Test ◽  
Hypochlorite Solution ◽  
Root Canals ◽  
Significant Difference ◽  
Level Of Significance

Aim. The purpose of this in vitro study was to assess the antimicrobial efficacy of Biopure MTAD against E. faecalis in contaminated root canals. Materials and Methods. Forty-two single rooted extracted human teeth were inoculated with E. faecalis and incubated for four weeks. The samples were divided in two control and five experimental groups irrigated with 1.5% sodium hypochlorite solution (NaOCl); 3% NaOCl; BioPure MTAD; 1.5% NaOCl/17% EDTA; or 3% NaOCl/17% EDTA. After a one-week incubation, complete disinfection was confirmed by the absence of turbidity in the incubation media. Dentin shavings were taken from samples with no turbidity to verify whether E. faecalis was present in dentin tubules. Results were analyzed statistically using Fisher's exact test, with the level of significance set at . Results. Statistical analysis of the data obtained at Day 7 and after dentin shaving analysis showed that BioPure MTAD had significantly greater antibacterial activity than 1.5% NaOCl, 1.5% NaOCl/17% EDTA and 3% NaOCl/17% EDTA. No significant difference was detected between MTAD and 3% NaOCl. Conclusions. These findings suggest that BioPure MTAD possesses superior bactericidal activity compared with NaOCl and EDTA against E. faecalis.

scholarly journals In vitro quantitative evaluation of marginal microleakage in class II restorations confected with a glass ionomer cement and two composite resins

2001 ◽  
Vol 15 (4) ◽  
pp. 277-282 ◽  
Author(s):  
Maria Fernanda Borro BIJELLA ◽  
Maria Francisca Thereza Borro BIJELLA ◽  
Salete Moura Bonifácio da SILVA
Keyword(s):  
Glass Ionomer Cement ◽  
Class Ii ◽  
Deionized Water ◽  
Composite Resins ◽  
Glass Ionomer ◽  
Dye Penetration ◽  
Significant Difference ◽  
Distal Direction ◽  
Ionomer Cement

This study evaluated, in vitro, marginal microleakage in class II restorations confected with the glass ionomer cement Vitremer and with the composite resins Ariston pHc and P-60. The aims of the study were to assess the effect of thermocycling on those materials and to evaluate two methods utilized in the analysis of dye penetration. Sixty premolars divided in three groups were utilized; the teeth had proximal cavities whose cervical walls were located 1 mm below the cementoenamel junction. Half of the test specimens from each group underwent thermocycling; the other half remained in deionized water, at 37ºC. The specimens were immersed, for 24 hours, in a basic 0.5% fuchsin solution at 37ºC. For the analysis of microleakage, the specimens were sectioned in a mesio-distal direction, and the observation was carried out with the software Imagetools. The results were evaluated through the 2-way ANOVA and through the Tukey’s test. All groups presented marginal microleakage. The smallest values were obtained with Vitremer, followed by those obtained with the composite resins P-60 and Ariston pHc. There was no statistically significant difference caused by thermocycling, and the method of maximum infiltration was the best for detecting the extension of microleakage.

In Vitro morphological, optical and microbiological evaluation of nanosilver fluoride in the remineralization of deciduous teeth enamel

2018 ◽  
Vol 7 (6) ◽  
pp. 509-520 ◽  
Author(s):  
Amitis Vieira Costa e Silva ◽  
Joás Araújo Teixeira ◽  
Cláudia C.B.O. Mota ◽  
Emery Clayton Cabral Correia Lins ◽  
Paulo Correia de Melo Júnior ◽  
...  
Keyword(s):  
Dental Enamel ◽  
Deionized Water ◽  
Deciduous Teeth ◽  
Bacterial Suspension ◽  
Significant Difference ◽  
Ph Cycling ◽  
Optical Coherence Tomography Imaging ◽  
Caries Lesions ◽  
Mixed Linear Regression Model

AbstractBackgroundNanosilver fluoride (NSF) was developed as an alternative in the prevention of dental caries.PurposeThe aim of this study was to test the remineralizing action of NSF on incipient enamel caries and its antimicrobial action on the acid production and adhesion of Streptococcus mutans.MethodsDeciduous enamel fragments were treated with sodium fluoride (NaF), NSF and deionized water. Microhardness, fluorescence spectroscopy and optical coherence tomography imaging were performed on each specimen before chemical caries induction, after caries induction and after 14 days of pH cycling. The treated enamel fragments were also placed into test tubes containing bacterial suspension and saliva. The pH readings and quantification of the adhered microorganisms to the dental enamel were determined. Analysis of variance, Kruskal-Wallis, Mann-Whitney, Tukey and mixed linear regression model were applied.ResultsNSF and NaF were effective in enamel remineralization, with a statistically significant difference (p<0.001) to deionized water, and they had no statistically significant difference between themselves (p>0.005). NSF had greater effectiveness compared to NaF in preventing decreases of pH and adhesion of S. mutans to the enamel surface, with statistically significant (p<0.001) differences.ConclusionNSF may be more effective than conventional fluorides in treating incipient caries lesions due to its remineralization and antibacterial actions.

Sign in / Sign up

Export Citation Format

Share Document