scholarly journals Fruit yield and composition in orange trees cv. 'Lane Late' in response to nitrogen fertilization in Sandy Typic Hapludalf soil

2017 ◽  
Vol 47 (3) ◽  
Author(s):  
Gustavo Brunetto ◽  
◽  
Cesar Cella ◽  
Alcione Miotto ◽  
Eduardo Girotto ◽  
...  
Keyword(s):  
Fruit Juice ◽  
Organic Matter Content ◽  
Titratable Acidity ◽  
N Fertilization ◽  
Fruit Yield ◽  
Soluble Solids ◽  
Total N ◽  
Total Titratable Acidity ◽  
Orange Trees ◽  
The Impact

ABSTRACT: Little is known about the impact of N fertilization on fruit production and composition in orange groves grown in soils with low or medium organic matter content in Rio Grande do Sul (RS). This study aimed to evaluate how N fertilization of orange trees cv. 'Lane Late' in a sandy soil may interfere in fruit yield and composition of fruit and juice. The experiment was conducted with orange trees cv. 'Lane Late' growing in Sandy Typic Hapludalf soil, in Rosário do Sul (RS). The plants received applications of 0, 20, 40, 60, 80, 100, 120, 140 and 160kg N ha-1. Total N in leaves, number of fruits per plant, yield, fresh weight, fruit diameter, peel thickness, percentage of fruit juice, peel color, juice color, ascorbic acid content, total soluble solids (TSS) and total titratable acidity were evaluated in 2010/2011 and 2011/2012 crops. In the first crop, especially yield, number of fruits per plant, TSS content in fruit juice and ratio decreased with increasing N rate applied. However, in the second crop, the total titratable acidity of the fruit juice prominently increased with the dose of N applied. In both crops, results were highly influenced by rainfall distribution, which affect the plant physiology, soil N dynamics and, consequently, probability of response to N applied and the loss of mineral N in the soil.

scholarly journals Fermentation Condition and Quality Evaluation of Pineapple Fruit Wine

Fermentation ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 11
Author(s):  
Antika Boondaeng ◽  
Sumaporn Kasemsumran ◽  
Kraireuk Ngowsuwan ◽  
Pilanee Vaithanomsat ◽  
Waraporn Apiwatanapiwat ◽  
...  
Keyword(s):  
Antioxidant Activities ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Total Phenolic ◽  
Pineapple Juice ◽  
Volatile Acidity ◽  
Total Titratable Acidity ◽  
Total Antioxidant ◽  
Pineapple Fruit ◽  
The Impact

This research investigated the impact of the concentration of pineapple juice on the characteristics of pineapple wine during fermentation with Saccharomyces cerevisiae var. burgundy. Three ratios of fresh pineapple juice to water were mixed to obtain three treatments, which were T1—2:1, T2—1:1, and T3—1:2. The °Brix and pH of all pineapple juice and water ratios were adjusted to 25 and 4, respectively. The results showed that changes in alcohol, pH, Total Soluble Solids (TSS), Total Titratable Acidity (TAA, as citric acid), and Volatile Acidity (VA, as acetic acid) during the 10-day fermentation among three treatments were significantly different. The highest alcohol content was obtained from the 2:1 with values of 10.71% (v/v). The mixed ratio at 1:1 and 1:2 obtained the alcohol value of 9.61 and 8.35% (v/v), respectively. After ten days of fermentation, TSS, pH values, TAA, and VA were in the range of 9.7–13 °Brix, 3.56–3.82, 0.384–0.448, and 0.0013–0.0016, respectively. However, the appearance, aroma, and taste of all ratios were not significantly different. Sweetness and overall liking, wine with pineapple juice/water ratio at 2:1 had the highest score (p ≤ 0.05). The total antioxidant activities determined by DPPH and total phenolic content were 0.91 mmol/L TE and 365.80 mg/L GAE, respectively, as confirmed by FTIR spectral analyses.

scholarly journals Initial production and fruit quality of scion-rootstock combinations in orange trees in Amazonas

2021 ◽  
Vol 43 (3) ◽  
Author(s):  
Jefferson Costa Santos ◽  
Cláudio Luiz Leone Azevedo ◽  
José Eduardo Borges de Carvalho ◽  
Silvana Pimentel de Oliveira ◽  
Ajax de Souza Ferreira ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Rangpur Lime ◽  
Yield Efficiency ◽  
Total Titratable Acidity ◽  
Citrus Production ◽  
Technological Index ◽  
Orange Trees

Abstract The cultivation of orange trees in Amazonas, Brazil relies predominantly on grafted plants combining ‘Pera’ scion and ‘Rangpur’ lime rootstock. Alternative rootstocks better adapted to the conditions of the region have not been investigated. Therefore, the objective of this research was to test seven rootstocks for the production of high-quality oranges under the typical conditions of the Amazon. Citrus production was evaluated from May to August between 2017 and 2019, based on the variables of cumulative yield, yield efficiency, and crop-yield index over the study period. The fruit physicochemical quality was evaluated by quantification of total soluble solids, total titratable acidity, ratio, juice percentage, and technological index. ‘Indio,’ ‘BRS Bravo’, and ‘Riverside’ genotypes combined with ‘Pera’/CNPMF scion had the highest yield and good fruit quality. They are potentially the most suitable combinations to grow sweet oranges in the Amazon.

scholarly journals Studies of chemical and enzymatic characteristics of Yacon (Smallanthus sonchifolius) and its flours

2013 ◽  
Vol 33 (1) ◽  
pp. 75-83 ◽  
Author(s):  
Juciane de Abreu Ribeiro Pereira ◽  
Maria de Fátima Píccolo Barcelos ◽  
Michel Cardoso De Angelis Pereira ◽  
Eric Batista Ferreira
Keyword(s):  
Oxalic Acid ◽  
Dietary Fiber ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Average Yield ◽  
Total Dietary Fiber ◽  
Smallanthus Sonchifolius ◽  
Total Titratable Acidity ◽  
Wet Weight ◽  
Peroxidase Enzymes

Due to the importance of studies on yacon related to health, its in natura pulp, in natura peel, pulp flour, and peel flour were chemically analyzed in terms of its centesimal composition, specific minerals, total dietary fiber and fractions, pH, total soluble solids, total titratable acidity, tannins, oxalic acid, and nitrate. The polyphenoloxidase and peroxidase enzymatic activities were evaluated for in natura pulp and peel only. Yacon pulp and peel flour presented average yield of 7.94% and 10.86%, respectively. The in natura pulp presented a higher moisture and carboydrate content and lower lipid, protein, total dietary fiber, and ash than those of the peel flour. The same pattern was observed for pulp flour when compared to peel flour. The highest tannin, nitrate, and oxalic acid levels were found in the peel flour, 15,304.5 mg.kg-1, 1,578.3 mg.kg-1, and 7,925.0 mg.kg-1 (wet weight), respectively. The polyphenoloxidase and peroxidase enzymes presented higher enzymatic activity in the yacon peel. Based on the results obtained, it can be said that the yacon and its derivatives are important dietary carbohydrate and mineral sources and contain antinutritional substance contents lower than those harmful to health.

scholarly journals Productivity, quality of fruits and architecture of Jalapeño pepper at different planting densities

2019 ◽  
Vol 37 (3) ◽  
pp. 331-337
Author(s):  
Carlos Francisco Ragassi ◽  
Juliana Zucolotto ◽  
Lucas M Gomes ◽  
Cláudia SC Ribeiro ◽  
Nuno Rodrigo Madeira ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Plant Architecture ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Randomized Complete Block Design ◽  
Total Titratable Acidity ◽  
Second Year ◽  
Increase In Productivity

ABSTRACT Mechanizing the harvest of Jalapeño pepper involves changes in the production system. Spacings between plants in rows (10 to 40 cm; 60 cm fixed between rows) were evaluated in relation to plant architecture, productivity and fruit quality of cultivar BRS Sarakura during three years, in a randomized complete block design with five replicates. Productivity (41.9 to 78.8 t ha-1) and plant height (40.1 to 47.3 cm) responded linearly to density; on the other hand, productivity per plant responded negatively (0.48 to 1.04 kg plant-1). The stem first bifurcation height was little influenced. Fruit chemical analyses were carried out in the second year of the experiment; spacing significantly influenced pH (5.36 to 4.84), total titratable acidity (TTA) (0.48 to 0.36%) and total soluble solids (TSS)/TTA ratio (11.5 to 15.6); no influence on TSS (5.65%) was noticed, though. The increase of plant population provided an increase in productivity without affecting fruit quality; the highest height of the first bifurcation achieved may not be enough to enable mechanized harvesting of the cultivar BRS Sarakura.

scholarly journals Physicochemical properties of seven outstanding strawberry (Fragaria x ananassa Duch.) varieties cultivated in Cundinamarca (Colombia) during maturation

2018 ◽  
Vol 19 (1) ◽  
Author(s):  
Gerhard Fischer ◽  
David López-Valencia ◽  
Manuel Sánchez-Gómez ◽  
John Fabio Acuña-Caita
Keyword(s):  
Titratable Acidity ◽  
Fruit Weight ◽  
Fragaria X Ananassa ◽  
Maturity Index ◽  
Soluble Solids ◽  
Maturity Stage ◽  
Fresh Weight ◽  
Respiration Rates ◽  
Total Titratable Acidity ◽  
Maturation State

The strawberry market in Cundinamarca (Colombia) is mainly size driven with no consideration for its maturation state and nutritional quality, wasting therefore, its organoleptic and nutritional potential. For that reason, the physicochemical differences among seven strawberry varieties (Albión, Dulce Ana, Lucía, Monterrey, Ruby June, Sabrina and Ventana) cultivated in the municipality of Sibaté (Cundinamarca) were established. Fruits collected from a productive plot with homogeneous cultivation management conditions were analyzed in six maturity states, establishing the degree of red pigmentation according to the Colombian Standard ntc 4103. Fresh weight, size, color, firmness, total soluble solids (tss), total titratable acidity (tta), maturity and respiration indices were evaluated. Fruits in stages 4, 2 and 3 developed their largest size and weight, where the variety Dulce Ana stands out. The highest color index values were found in the maturity stage 5 in the variety Ventana. Moreover, the highest firmness values were recorded in stages 4 and 5 in the varieties Monterrey and Ventana. The varieties Sabrina, Dulce Ana and Monterrey accumulated the highest tss concentration and the last two showed the best maturity relations. Respiration rates increased with maturation, especially from stage 3. The results suggest that the optimum commercialization and consumption points are stages 3 and 4, namely because these stages exhibit the highest maturity index and fruit weight. Among the varieties studied, Monterrey stands out due to its firmness and maturity index.

scholarly journals Parâmetros físico-químicos de polpas de fruta produzidas na cidade de Petrolina – PE

2015 ◽  
Vol 10 (4) ◽  
pp. 01 ◽  
Author(s):  
A. C. Honorato ◽  
C. B. R. Dias ◽  
E. B. Souza ◽  
I. R. B. Carvalho ◽  
K. S. M. Sousa
Keyword(s):  
Ascorbic Acid ◽  
Physicochemical Parameters ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Chemical Characteristics ◽  
Fruit Pulp ◽  
Total Titratable Acidity ◽  
Physical And Chemical ◽  
The City

<p>Este trabalho teve como objetivo avaliar os parâmetros físico-químicos de polpas de fruta produzidas e comercializadas na cidade de Petrolina-PE, tendo como referência a Instrução Normativa nº 1, de 7 jan. 2000, do Ministério da Agricultura que define as características físicas e químicas estabelecendo limites mínimos e máximos específicos para cada polpa de fruta. Foram avaliadas duas marcas (1 e 2) de polpas de abacaxi, cacau, caju, graviola, maracujá e umbu, analisadas quanto aos parâmetros de pH, sólidos solúveis totais (SST), acidez total titulável (ATT), ácido ascórbico, relação SST/ATT e sólidos totais. Os resultados permitem inferir que a marca 2 apresentou qualidade superior na maioria dos parâmetros avaliados quando comparado com a marca 1. Entretanto para alguns sabores de polpa as duas marcas não atenderam os valores padrões. Entre as polpas o único sabor que apresentou os padrões exigidos foi a polpa de caju em ambas as marcas, e a que apresentou resultado de pior qualidade diante dos padrões foi a polpa de maracujá principalmente da marca 1. Dessa forma constata-se que há grandes variações entre as marcas, e entre alguns parâmetros, o que compromete a qualidade das polpas, prejudicando assim o consumidor.</p><p align="center"><strong><em>Physicochemical parameters of fruit pulps produced in Petrolina – PE</em></strong></p><p><strong>Abstract</strong><strong>: </strong>This study aimed to evaluate the physicochemical parameters of fruit pulps produced and marketed in the city of Petrolina-PE, with reference to the Instruction Nº 1 of 7 January 2000 of the Ministry of Agriculture, which defines the physical and chemical characteristics setting minimum and maximum limits specific to each fruit pulp. We evaluated two brands (1 and 2) of pineapple, cocoa, cashew, soursop, passion and umbu fruit pulp, analyzed for pH, total soluble solids (TSS), total titratable acidity (TTA), ascorbic acid, TSS / TTA and total solids parameters. Results show that the brand 2 showed superior in most evaluated parameters when compared to the brand 1. However, for some pulp flavors of both brands did not reached the standards values. Among the pulps, the only flavor that presented the required standards was the cashew pulp in both brands, and presented the results of lower quality on the standards was the passion fruit pulp mainly brand 1. Thus, it appears that there are great variations between brands and between some parameters, which compromises the quality of the pulp, thus impairing the consumer.</p>

scholarly journals Bioactive compounds in gladiolus flowers

2021 ◽  
Author(s):  
Alexandra Goede de Souza ◽  
Eduardo Affonso Jung ◽  
Vinícius Petermann Benedicto ◽  
Leosane Cristina Bosco
Keyword(s):  
Titratable Acidity ◽  
Soluble Solids ◽  
Total Phenolic ◽  
Anthocyanin Content ◽  
Cut Flowers ◽  
Flavonoid Content ◽  
Total Titratable Acidity ◽  
Total Antioxidant ◽  
Relationship Of ◽  
The Relationship

Abstract Flowers have received special attention not only for their ornamental nature but also for their nutraceutical, cosmetic, aromatic, and culinary properties. This study aimed to characterize physicochemical attributes and the antioxidant capacity of flowers of four gladiolus cultivars. The cultivars used were White Friendship, Rose Supreme, Jester, and T704. We analyzed the content of total soluble solids (SS), total titratable acidity (TA), SS/TA ratio, pH, vitamin C, anthocyanin, flavonoids, total phenolic compounds (TPC), total antioxidant activity (TAA), and the relationship of TPC with flavonoids and TAA for each cultivar. The results showed that the Jester flowers had the lowest TA and highest SS/TA ratio, indicating the best flavor. Jester also had the highest flavonoid content, similarly to the White Friendship and Rose Supreme. As a result, these cultivars have flowers with higher TPC and TAA content than T704. The anthocyanin content was the characteristic attribute of cultivar T704, due to its purple pigmentation. Gladiolus flowers, traditionally used in landscaping and as cut flowers, have the potential for use in human nutrition, particularly the White Friendship, Rose Supreme, and Jester cultivars.

scholarly journals Reuse of sand, crushed sugarcane and peanut hull-based substrates for cherry tomato cultivation

2007 ◽  
Vol 64 (6) ◽  
pp. 630-635 ◽  
Author(s):  
Carolina Fernandes ◽  
José Eduardo Corá ◽  
Leila Trevizan Braz
Keyword(s):  
Titratable Acidity ◽  
Production Costs ◽  
Soluble Solids ◽  
Good Growth ◽  
Cherry Tomato ◽  
Average Yield ◽  
Growth Season ◽  
Yield And Quality ◽  
Total Titratable Acidity ◽  
Peanut Hull

The reuse of substrates for more than one growing season is an alternative to reduce production costs. The objective of this work was to evaluate the yield and quality fruits of the cherry tomato (Lycopersicon esculentum) grown in reused substrates. The experimental design was a complete randomized block, with a factorial array of 7 × 2 (seven substrates and two growth periods), with four replications. The seven substrates consisted of different combinations of sand (S), crushed sugarcane (CS) and peanut hull (PH). The substrates used were: S1 = S; S2 = [(2/3 S) + (1/3 CS)]; S3 = [(2/3 S) + (1/3 PH)]; S4 = [(2/3 S) + (1/6 CS) + (1/6 PH)]; S5 = [(1/2 S) + (1/2 CS)]; S6 = [(1/2 S) + (1/2 PH)] and S7 = [(1/3 S) + (1/3 CS) + (1/3 PH)]. These substrates were tested as new (one growth season), and reused (two sequentially growth seasons). The cherry tomato average yield was 9.07 kg m-2 when growth on the new substrates, and 8.44 kg m-2 when growth on the reused ones. The fruit quality was not affected by the reutilization of the substrates. The average values were 6.5 ºBrix for total soluble solids; 0.6 g for citric acid per 100 g for total titratable acidity and 4.2 for pH. A substrate consisting of equal parts of the three components can be recommended as a good growth medium for cherry tomato. All the substrates tested can be efficiently reused, at least once.

scholarly journals Physico-chemical composition of native fruits of the Ceará coast at different development stages

2017 ◽  
Vol 21 (9) ◽  
pp. 640-644 ◽  
Author(s):  
Nigéria P. Gonçalves ◽  
Eliseu M. P. de Lucena ◽  
Oriel. H. Bonilla ◽  
Francisca J. C. Tavares
Keyword(s):  
Chemical Composition ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Maturation Stage ◽  
Total Soluble Solids ◽  
Development Stages ◽  
Randomized Design ◽  
Physico Chemical ◽  
Stage 4 ◽  
Total Titratable Acidity

ABSTRACT This study aimed to evaluate the physico-chemical composition of native fruits of the Ceará coast at different development stages. The fruits of ‘guajiru’, ‘manipuçá’, ‘murici-pitanga’ and ‘murta’ were collected during the year 2014, and the following evaluations were made: total soluble solids, total titratable acidity, pH, total soluble solids and titratable acidity ratio. A completely randomized design was used, with 5 or 6 treatments, depending on the maturation stage and 4 replicates. For total soluble solids, ‘murta’ obtained a minimum of 2.6 °Brix in stage 1 and ‘manipuçá’ obtained maximum of 24.53 °Brix in stage 5. For the total titratable acidity, ‘guajiru’ showed minimum of 0.09% in stages 3 and 4, and ‘murici-pitanga’ showed maximum of 3.29% in stage 6. ‘Murici-pitanga’ had minimum pH of 3.44 in stage 5 and ‘guajiru’, maximum pH of 5.9 in stage 2. For total soluble solids and titratable acidity ratio, ‘murici-pitanga’ exhibited a minimum of 3.25 in stages 1 and 3, and ‘guajiru’ showed maximum of 141.11 in stage 4. It was concluded that ‘guajiru’ and ‘manipuçá’ fruits reached physiological maturity in stage 3, whereas ‘murici-pitanga’ and ‘murta’ fruits reached in stage 4; thus, these are the ideal stages for fruit harvest.

scholarly journals Stability of cactus-pear powder during storage

2016 ◽  
Vol 20 (2) ◽  
pp. 169-173
Author(s):  
Plúvia O. Galdino ◽  
Rossana M. F. de Figueirêdo ◽  
Alexandre J. de M. Queiroz ◽  
Pablícia O. Galdino ◽  
Tâmila K. da S. Fernandes
Keyword(s):  
Water Content ◽  
Water Activity ◽  
Reducing Sugars ◽  
Titratable Acidity ◽  
High Water ◽  
Soluble Solids ◽  
High Water Content ◽  
Cactus Pear ◽  
Total Titratable Acidity ◽  
The Stability

ABSTRACT The stability of cactus-pear powder, obtained by the process of spray drying for 40 days, was evaluated under controlled conditions of relative air humidity (83%) and temperature (25 and 40 °C). The whole pulp was characterized with regard to its physico-chemical parameters: pH, total titratable acidity, soluble solids, water content, total solids, ashes, reducing sugars, total sugars, non-reducing sugars, luminosity, redness, yellowness and water activity. The stored samples in powder were evaluated every 10 days for water content, water activity, total titratable acidity and color (luminosity, redness and yellowness). The whole pulp was slightly acidic and perishable, due to the high water content. During storage, the packages did not prevent water absorption, thus increasing water content and, consequently, water activity. Yellowness oscillated along the storage time, but the predominance of the yellow color was not affected.

Sign in / Sign up

Export Citation Format

Share Document