scholarly journals Bioactivity of leucite containing glass - ceramics using natural raw materials

2014 ◽  
Vol 17 (4) ◽  
pp. 1031-1038 ◽  
Author(s):  
Franco Matías Stábile ◽  
Cristina Volzone
Keyword(s):  
Raw Materials ◽  
Glass Ceramics

scholarly journals Eco-Compatible Construction Materials Containing Ceramic Sludge and Packaging Glass Cullet

2021 ◽  
Vol 11 (8) ◽  
pp. 3545
Author(s):  
Fernanda Andreola ◽  
Isabella Lancellotti ◽  
Paolo Pozzi ◽  
Luisa Barbieri
Keyword(s):  
Raw Materials ◽  
Construction Materials ◽  
Treatment Plant ◽  
Glass Ceramics ◽  
Chemical Properties ◽  
Linear Shrinkage ◽  
Glass Cullet ◽  
Commercial Glass ◽  
Packaging Glass ◽  
And Chemical Properties

This research reports results of eco-compatible building material obtained without natural raw materials. A mixture of sludge from a ceramic wastewater treatment plant and glass cullet from the urban collection was used to obtain high sintered products suitable to be used as covering floor/wall tiles in buildings. The fired samples were tested by water absorption, linear shrinkage, apparent density, and mechanical and chemical properties. Satisfactory results were achieved from densification properties and SEM/XRD analyses showed a compact polycrystalline microstructure with albite and wollastonite embedded in the glassy phase, similar to other commercial glass-ceramics. Besides, the products were obtained with a reduction of 200 °C with respect to the firing temperatures of commercial ones. Additionally, the realized materials were undergone to leaching test following Italian regulation to evaluate the mobility of hazardous ions present into the sludge. The data obtained verified that after thermal treatment the heavy metals were immobilized into the ceramic matrix without further environmental impact for the product use. The results of the research confirm that this valorization of matter using only residues produces glass ceramics high sintered suitable to be used as tile with technological properties similar or higher than commercial ones.

Microstructure, Mechanical Properties, and Electrical Resistivities of Mica Glass-Ceramics with Flake Phlogopite and Waste Glass

2014 ◽  
Vol 602-603 ◽  
pp. 640-643
Author(s):  
Yu Fei Chen ◽  
Yan Gai Liu ◽  
Xiao Wen Wu ◽  
Zhao Hui Huang ◽  
Ming Hao Fang
Keyword(s):  
High Speed ◽  
Sintering Temperature ◽  
Raw Materials ◽  
Glass Ceramics ◽  
Waste Glass ◽  
Raw Material ◽  
Bending Test ◽  
Electric Locomotive ◽  
Molding Process ◽  
Electrical Resistivities

Mica glass-ceramics can be applied in all kinds of electrical equipment, locomotive internal circuits in high-speed rail, ordinary electric locomotive and subway locomotive. In this study, mica glass-ceramics were prepared by sintering process using flake mica and waste glass as the main raw material with low cost. Different mica glass-ceramic samples were fabricated by changing the formula of raw materials, molding process and sintering temperature. X-ray diffraction, scanning electron microscopy, three-point bending test, and balanced-bridge technique were applied to investigate the phase, microstructure, mechanical and electrical resistivities of the samples, respectively. The results show that the optimum sintering temperature is 900 to 1000 °C holding for two hours, the desirable ratio is 70 wt% of mica powder while 30 wt% of glass powder. In that condition the sample could be less porosity, high flexural strength (63.3 MPa) and eligible electrical resistivity (0.4×1013 Ω·cm).

scholarly journals Preparation of basalt-based glass ceramics

2003 ◽  
Vol 68 (6) ◽  
pp. 505-510 ◽  
Author(s):  
Branko Matovic ◽  
Snezana Boskovic ◽  
Mihovil Logar
Keyword(s):  
Optical Microscopy ◽  
Phase Analysis ◽  
Glass Ceramic ◽  
Glassy Phase ◽  
Raw Materials ◽  
Glass Ceramics ◽  
High Strength ◽  
Ceramic Materials ◽  
X Ray ◽  
Glass Ceramic Materials

Local and conventional raw materials?massive basalt from the Vrelo locality on Kopaonik mountain?have been used as starting materials to test their suitability for the production of glass-ceramics. Crystallization phenomena of glasses of the fused basalt rocks were studied by X-ray phase analysis optical microscopy and other techniques. Various heat treatments were used and their influences, on controlling the microstructures and properties of the products were studied with the aim of developing high strength glass-ceramic materials. Diopside CaMg(SiO3)2 and hypersthene ((Mg,Fe)SiO3) were identifies as the crystalline phases. The final products contained considerable amounts of a glassy phase. The crystalline size was in range of 8?480 ?m with plate or needle shape. Microhardness, crashing strength and wears resistence of the glass-ceramics ranged from 6.5?7.5, from 2000?6300 kg/cm2 and from 0.1?0.2 g/cm, respectively.

scholarly journals High strength glass-ceramics sintered with coal gangue аs а raw material

2019 ◽  
Vol 51 (3) ◽  
pp. 285-294
Author(s):  
Dang Wei ◽  
H.-Y. He
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Glass Ceramics ◽  
High Strength ◽  
Coal Gangue ◽  
Raw Material ◽  
Sintering Process ◽  
Forming Process ◽  
Sintered Glass ◽  
Utilization Ratio

High strength lightweight glass-ceramics were fabricated with coal gangue and clay as main raw materials. The utilization ratio of coal gangue, the ratio of the coal gangue with clay, mineralization agents, forming process and sintering process on the properties of the fabricated glass-ceramics were optimized. The utilization ratio of coal gangue reached 75, and the ratio of coal gangue to clay was 3/1, as an optimal property was observed. The optimal sintering temperature was found to be 1370?C. At this optimal temperature, the sintered glass-ceramics showed the main phase of mullite and spindle and so showed high strength, low density, and low water absorbance. The appropriate amounts of codoping of the TiO2, ZnO, and MnO2/dolomite as mineralization agents obviously enhanced the properties of the glass-ceramics. Process optimizations further determined reasonable and optimal process parameters. The high strength lightweight glass-ceramics fabricated in this work may be very suitable for various applications including building materials, cooking ceramics, and proppant materials, et al.

scholarly journals Utilization of discarded foundry sand (DFS) and inorganic waste from cellulose and paper industry for the manufacture of glass-ceramic materials

Cerâmica ◽  
2020 ◽  
Vol 66 (380) ◽  
pp. 413-420
Author(s):  
L. M. S. e Silva ◽  
R. S. Magalhães ◽  
W. C. Macedo ◽  
G. T. A. Santos ◽  
A. E. S. Albas ◽  
...  
Keyword(s):  
Glass Ceramic ◽  
Raw Materials ◽  
Paper Industry ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Foundry Sand ◽  
X Ray ◽  
Glass Ceramic Materials

Abstract Recycling has been pointed out as an alternative to the disposal of waste materials in industrial landfills. In the present study, the transformation of residues (discarded foundry sand - DFS, grits, and lime mud) in glass-ceramic materials is shown. The glasses were obtained by the melting/cooling method. The precursor materials, glasses, and glass-ceramics were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), and differential scanning calorimetry/thermal gravimetric analysis (DSC/TGA). The glassy materials were milled, pelleted, and thermally treated at the crystallization temperatures given by DSC data to obtain the glass-ceramics (885, 961, and 1090 ºC). The main formed phases were cristobalite, α-wollastonite (parawollastonite), and β-wollastonite (pseudowollastonite). The glass-ceramics showed very low water absorption and apparent porosity (0.26 to 0.88 wt% and 0.66 to 1.77 vol%, respectively). The results confirmed that the studied residues can be used as raw materials for the manufacture of vitreous and glass-ceramic materials.

Properties of ZrO2/Glass-Ceramics Composite

2007 ◽  
Vol 280-283 ◽  
pp. 995-998
Author(s):  
Y.M. Zhu ◽  
Xia Wan Wu ◽  
Zhi Hong Li
Keyword(s):  
Thermal Expansion ◽  
Flexural Strength ◽  
Glass Powder ◽  
Sintering Temperature ◽  
Raw Materials ◽  
Glass Ceramics ◽  
Glass Content ◽  
Thermal Expansion Coefficients ◽  
Lower Thermal Expansion ◽  
Expansion Coefficients

In order to reduce the raw materials cost, lower the sintering temperature of 3Y-TZP optical fiber ferrules, the 3Y-TZP/ LAS glass ceramics composites were prepared and their properties were investigated in this paper. The results showed that the sintering temperatures and thermal expansion coefficients of the 3Y-TZP/LAS glass ceramics composites were lowered with the increase of glass content. The flexural strength of the composites were decreased with the increase of glass content, but the flexural strength of the composite with 15% weight glass was higher than 400MPa. The LAS glass powder added into the composites was crystallized and b-spodumene s.s was precipitated. during sintering. The b-spodumene s.s. having lower thermal expansion coefficient and higher strength was beneficial to reduce thermal expansion coefficients and keep higher strengths of the composites .

scholarly journals Mutual Influence of Special Components in Baotou Steel Blast Furnace Slag on the Crystallization Behavior of Glass

2012 ◽  
Vol 2012 ◽  
pp. 1-6
Author(s):  
Yici Wang ◽  
Qi Jiang ◽  
Guoping Luo ◽  
Wenwu Yu ◽  
Yan Ban
Keyword(s):  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Crystallization Behavior ◽  
Mutual Influence ◽  
Raw Materials ◽  
Glass Ceramics ◽  
Nucleating Agent ◽  
Crystal Phase ◽  
Furnace Slag ◽  
Crystallization Of Glass

In the process of glass-ceramics prepared with Baotou steel blast furnace slag, quartz sand, and other raw materials by melting method, the mutual influence of the special components such as CaF2, REXOY, TiO2, K2O, and Na2O in the blast furnace slag on the crystallization behavior of parent glass was investigated using differential thermal analysis (DTA) and X-ray diffraction (XRD). The results show that the special components in slag can reduce the crystallization temperature and promote crystallization of glass phase, which belongs to surface crystallization of glass, and they cannot play the role of the nucleating agent; the major crystal phase composed of diopside, diopside containing aluminum and anorthite, is slightly different from the expected main crystal phase of diopside. Therefore, the nucleating agents of proper species and quantity must be added into the raw materials in order to obtain glass-ceramics. The results have important theoretical guidance meaning for realizing industrial production of Baotou steel blast furnace slag glass-ceramics preparation.

scholarly journals Agricultural wastes as a resource of raw materials for developing low-dielectric glass-ceramics

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Satwinder Singh Danewalia ◽  
Gaurav Sharma ◽  
Samita Thakur ◽  
K. Singh
Keyword(s):  
Raw Materials ◽  
Glass Ceramics ◽  
Agricultural Wastes ◽  
Low Dielectric ◽  
Dielectric Glass

Characteristics of 45S5 Bioglass-Ceramics Using Natural Raw Materials

2012 ◽  
Vol 506 ◽  
pp. 174-177
Author(s):  
W. Leenakul ◽  
N. Pisitpipathsin ◽  
P. Kantha ◽  
N. Tawichai ◽  
S. Tigunta ◽  
...  
Keyword(s):  
Raw Materials ◽  
Glass Ceramics ◽  
Treatment Temperature ◽  
Phase Identification ◽  
Bovine Bone ◽  
In Vitro Test ◽  
Phase Form ◽  
Different Temperatures ◽  
Optimum Heat

The aim of this work was to analyze the effect of using rice husk ash (RHA) and bovine bone as raw materials of glass-ceramics based on the SiO2-Na2O-CaO-P2O5system on their physical, mechanical properties and bioactivity. All of the investigated compositions were prepared by melting the glass mixtures at 1300°C for 3 h. The resulting glass samples were heated at different temperatures ranging from 600 to 1000°C with fixed dwell-time for 2 h for crystallization. Phase identification of the prepared glass ceramics was carried out by X-Ray diffraction (XRD) and scanning electron microscope (SEM) techniques. In addition, in vitro test was carried out in stimulated body fluid (SBF). Differential thermal analysis (DTA) showed that the glass transition occurred at 505°C and crystallization at 700°C. The main crystalline phase form in most glass ceramics is a sodium calcium silicate. The optimum heat treatment temperature, at which the maximum mechanical value (620 HV) could be obtained, is around 1000°C. After incubation in SBF for 7 days, all of the samples show good bioactivity in vitro, as evident by the formation of bone like apatite phase.

Sign in / Sign up

Export Citation Format

Share Document