scholarly journals BIOMASS ACCUMULATION AND NUTRITION IN MICROPROPAGATED PLANTS OF THE BANANA ‘PRATA CATARINA’ UNDER BIOFERTILISERS

2017 ◽  
Vol 30 (4) ◽  
pp. 901-911 ◽  
Author(s):  
EDER DE OLIVEIRA SANTOS ◽  
THALES VINICIUS DE ARAÚJO VIANA ◽  
GEOCLEBER GOMES DE SOUSA ◽  
ANA CRISTINA PORTUGAL PINTO DE CARVALHO ◽  
BENITO MOREIRA DE AZEVEDO
Keyword(s):  
Anaerobic Fermentation ◽  
Biomass Accumulation ◽  
Dry Weight ◽  
Mineral Element ◽  
Aerobic Fermentation ◽  
Different Types ◽  
Micropropagated Plants ◽  
Leaves And Roots ◽  
Social Importance ◽  
Different Parts

ABSTRACT Banana farming is an activity of great economic and social importance, and is carried out in most tropical countries. The aim of this work was to evaluate the biomass accumulation and levels of nitrogen (N), phosphorus (P), potassium (K), calcium (Ca) and magnesium (Mg) in micropropagated plants of the banana “Prata Catarina” during the acclimatization phase, under different types and doses of biofertilisers. The experimental design included randomised blocks in a 2 × 5 + (2) factorial scheme, with two types of liquid biofertilisers (bovine biofertiliser with anaerobic and aerobic fermentation) and five biofertiliser doses (0.25, 0.50, 0.75, 1.00, and 1.25 L plant-1 week-1), as well as two additional treatments (control and recommended mineral fertilisation). The following variables were analysed: dry weight of the leaves and roots, and mineral element content (N, P, K, Ca, and Mg) in different parts of the plant (leaf and root). During 90 days of acclimatization, the nutritional contribution of bovine biofertiliser with anaerobic fermentation was greater in comparison with the biofertiliser with aerobic fermentation and the control, but lower in comparison with mineral fertilisation. The 1000-mL dose of the biofertiliser with anaerobic fermentation promoted greater dry weight accumulation in the leaves and roots of the banana “Prata Catarina”. The biofertiliser with anaerobic fermentation promoted higher levels of N, K, and Ca in the leaves, whereas the biofertiliser with aerobic fermentation promoted higher levels of P in the leaves and roots.

scholarly journals GERMINATION AND VIGOUR IN SEEDS OF THE COWPEA IN RESPONSE TO SALT AND HEAT STRESS

2019 ◽  
Vol 32 (1) ◽  
pp. 143-151 ◽  
Author(s):  
Luma Rayane de Lima Nunes ◽  
Paloma Rayane Pinheiro ◽  
Charles Lobo Pinheiro ◽  
Kelly Andressa Peres Lima ◽  
Alek Sandro Dutra
Keyword(s):  
Salt Stress ◽  
Heat Stress ◽  
High Temperature ◽  
Low Temperature ◽  
Vigna Unguiculata ◽  
Salt Concentration ◽  
Dry Weight ◽  
Germination Percentage ◽  
Different Types ◽  
Different Temperatures

ABSTRACT Salinity is prejudicial to plant development, causing different types of damage to species, or even between genotypes of the same species, with the effects being aggravated when combined with other types of stress, such as heat stress. The aim of this study was to evaluate the tolerance of cowpea genotypes (Vigna unguiculata L. Walp.) to salt stress at different temperatures. Seeds of the Pujante, Epace 10 and Marataoã genotypes were placed on paper rolls (Germitest®) moistened with different salt concentrations of 0.0 (control), 1.5, 3.0, 4.5 and 6.0 dS m-1, and placed in a germination chamber (BOD) at temperatures of 20, 25, 30 and 35°C. The experiment was conducted in a completely randomised design, in a 3 × 4 × 5 scheme of subdivided plots, with four replications per treatment. The variables under analysis were germination percentage, first germination count, shoot and root length, and total seedling dry weight. At temperatures of 30 and 35°C, increases in the salt concentration were more damaging to germination in the Epace 10 and Pujante genotypes, while for the Marataoã genotype, damage occurred at the temperature of 20°C. At 25°C, germination and vigour in the genotypes were higher, with the Pujante genotype proving to be more tolerant to salt stress, whereas Epace 10 and Marataoã were more tolerant to high temperatures. Germination in the cowpea genotypes was more sensitive to salt stress when subjected to heat stress caused by the low temperature of 20°C or high temperature of 35°C.

Ground Transport for an Air Organisation

1928 ◽  
Vol 32 (211) ◽  
pp. 596-623 ◽  
Author(s):  
R. E. H. Allen
Keyword(s):  
British Empire ◽  
Air Force ◽  
Similar Magnitude ◽  
Ground Vehicles ◽  
Royal Air Force ◽  
Different Types ◽  
Aerial Transport ◽  
Different Parts

Probably few realise that a self–contained organisation for maintaining an air fleet would need many more different types of ground vehicles than aircraft. This is true in the case of the Royal Air Force even if all vehicles of a purely military nature are excluded. It is highly probable that a civilian air organisation of similar magnitude would have fewer types of aircraft, but if it were to be self–contained and operate in different parts of the globe, it could not do with many less types of ground vehicles than the R.A.F. finds necessary.Obviously this depends on the interpretation of the term “self–contained.” Most of the small aerial transport companies have their own ground transport organisations, but they are far from being self–contained in the sense in which the author wishes to use the term to–night. We would all like to see a vast civilian air organisation operating in and between all the different units which comprise the British Empire. Nothing would do more to knit us and the Dominions and Colonies into one impregnable whole.

scholarly journals Die Gattung Erratencrinurus Krueger, 1971 (Trilobita; Ordovizium) aus baltoskandischen Geschieben

Fossil Record ◽  
2004 ◽  
Vol 7 (1) ◽  
pp. 69-132
Author(s):  
H.-H. Krueger
Keyword(s):  
New Species ◽  
Hard Rock ◽  
Late Ordovician ◽  
Middle Ordovician ◽  
Different Types ◽  
Single Spine ◽  
Pore Canals ◽  
Different Parts

Aus der mittel- bis oberordovizischen Trilobitenfamilie Encrinuridae, die in Baltoskandia durch die Untergattungen <i>Erratencrinurus</i> und <i>Celtencrinurus</i> repräsentiert wird, werden achtzehn Arten beschrieben, darunter die vier neuen Arten <i>Erratencrinurus (E.) sellinensis, E. (E.) heinrichi, E. (E.) praecapricornu</i> und <i>E. (E.) rhebergeni</i>. Das überwiegende Material stammt aus dem schwer zu präparierenden Ostseekalk. Die Tripp'sche Tuberkelformel wurde der <i>Erratencrinurus</i>-Gruppe angepasst; innerhalb der <i>Erratencrinurus</i>-Gruppe können drei verschiedene Schilder-Typen des scutum rostrale nachgewiesen werden. Unterschiedliche Tuberkeltypen bis hin zu extremen Stacheln wurden beschrieben. Außerdem kann eine Reduzierung von drei Thoraxialstacheln im Mittelordovizium zu einem im oberen Oberordovizium festgestellt werden. Verschiedene Regionen des Panzers von <i>Erratencrinurus (E.) sellinensis</i>, die Porenkanäle besitzen, werden dargestellt. Ein neuer Häutungstyp kann an Panzerhemden von <i>Erratencrinurus (E.) seebachi</i> beschrieben werden. <br><br> In Baltoscandia the Middle to Late Ordovician trilobite family <i>Encrinurida</i> is represented by the two subgenera <i>Erratencrinurus</i> and <i>Celtencrinurus</i>. Out of these 18 species, four new species are described herein. Most of the material comes from the Ostseekalk which is an extremely hard rock and thus difficult to preparate. The tubercle formula after Tripp is applied to the <i>Erratencrinurus</i> group and led to the distinction of three different types of scutum rostrale shields. Various types of tubercles which may even pass into extreme spines are described. The number of thoracic spines becomes reduced from three spines in Middle Ordovician taxa to a single spine in youngest Ordovician species. Different parts of the carapace of <i>Erratencrinurus sellinensis</i> with pore canals are illustrated and a new moulting type of E. <i>seebachi</i> is introduced. New species are <i>E. sellinensis. E. heinrichi, E. praecapricornu and E. (E.) rhebergeni.</i> <br><br> doi:<a href="http://dx.doi.org/10.1002/mmng.20040070106" target="_blank">10.1002/mmng.20040070106</a>

Variation of Taxane Content in Needles of Taxus x media Cultivars with Different Growth Characteristics

2006 ◽  
Vol 61 (9-10) ◽  
pp. 619-624 ◽  
Author(s):  
Xinkun Wang ◽  
Yinghua Huang ◽  
Andrew J. Mort ◽  
Yuhong Zeng ◽  
Charles G. Tauer ◽  
...  
Keyword(s):  
High Performance ◽  
Biomass Accumulation ◽  
Dry Weight ◽  
Growth Characteristics ◽  
Alternative Methods ◽  
Baccatin Iii ◽  
Fast Growing ◽  
Taxus X Media ◽  
Slow Growing ◽  
Group 1

AbstractNeedles from 17 different Taxus x media cultivars, belonging to 4 groups showing different growth characteristics, were analyzed using high performance liquid chromatography for their content of 10-deacetylbaccatin III, baccatin III, cephalomannine and paclitaxel (Taxol®). The 4 Taxus x media cultivar groups were: 1.) medium to fast growing and upright form; 2.) slow growing and upright form; 3.) fast growing and spreading form; and 4.) slow growing and spreading form. The purpose of this study was to identify yew cultivars of fast growth rate, upright growth and high taxane content in their needles. The highest content of paclitaxel was found in ‘Coleana’ of group 1 (378 μg/g of the extracted dry weight). Three cultivars in group 1, ‘Coleana’, ‘Stovekenii’ and ‘Hicksii’, make good candidates for taxane extraction because of their high paclitaxel and 10-deacetylbaccatin III content, fast biomass accumulation and upright growing form. They are also good starting materials to develop alternative methods for the production of paclitaxel and its analogous compounds through modern biotechnology approaches.

Formation of Part Families for Shared Setups Generation in Sheet Metal Bending

1998 ◽  
Author(s):  
Satyandra K. Gupta
Keyword(s):  
Sheet Metal ◽  
Cost Effective ◽  
Second Step ◽  
Setup Planning ◽  
Planning Techniques ◽  
Individual Part ◽  
Part Families ◽  
Different Types ◽  
Sheet Metal Bending ◽  
Different Parts

Abstract Sheet metal bending press-brakes can be setup to produce more than one type of parts without requiring a setup change. To exploit this flexibility, we need setup planning techniques to generate press-brake setups that can be shared among many different parts. In this paper, we describe an algorithm which partitions a given set of parts into setup compatible part families which can be produced on the same setup. Our algorithm is based on a two step approach. The first step is to identify setup constraints for each individual part. The second step is to form setup-compatible part families based on the compatibility of setup constraints. We expect that by producing many different types of parts on the same setup, we can significantly reduce the required number of setups and enable cost effective small batch manufacturing.

Study of pH Effect on the Anaerobic-Aerobic Fermentation of Siwalan (Borassus flabellifer L.) Sap to Produce Acetic Acid

2019 ◽  
Vol 964 ◽  
pp. 209-214
Author(s):  
Elly Agustiani ◽  
Atiqa Rahmawati ◽  
Fibrillian Zata Lini ◽  
Dimas Luthfi Ramadhani
Keyword(s):  
Acetic Acid ◽  
Acid Concentration ◽  
Ethanol Fermentation ◽  
Anaerobic Fermentation ◽  
Sugar Content ◽  
Alcoholic Beverages ◽  
Acetic Acid Concentration ◽  
Acetobacter Aceti ◽  
Aerobic Fermentation ◽  
Acid Product

Siwalan (Borassus flabellifer L.) is a palm family that is widely planted in the Tuban area of ​​East Java. Siwalan sap has a relatively high sugar content of about 10-15 g / 100 ml. The sap is obtained by tapping the inflorescences. In general, siwalan sap is used for fresh drinks or alcoholic beverages with maximum storage in 3 days. Based on the sugar content in the sap of siwalan, acetic acid products can be made through fermentation of glucose to ethanol, then the ethanol is fermented into acetic acid. Acetic acid is widely used as a preservative of food and health drinks. The purpose of this research is to study the effect of ethanol fermentation aerobic pH on acetic acid product. Anaerobic fermentation uses saccharomyces cereviceae to produce ethanol, and aerobic fermentation uses acetobacter aceti for acetic acid production. In aerobic ethanol fermentation using pH 3; 3.5; 4 and 5. The concentration of ethanol was analyzed using GC ULTRA Scientific Gas Chromatography, DSQ II detector, and MS 220 column. Acetic acid produced from the aerobic fermentation process was analyzed using an alkalimetric method. Anaerobic fermentation uses Saccharomyces cereviceae with 1-day log phase, while aerobic fermentation uses acetobacter aceti with a 5 day log phase. Aerobic fermentation to produce acetic acid was observed in 5 days to obtained maximum acetic acid concentration, the highest acetic acid concetration is about 2.595 g/l and yield of acetic acid is obtained 0.519% (b/v) at pH 5. Low acetic acid concentration due to low intitial sugar content in siwalan sap.

scholarly journals Agro-economic yield of taro clones in Brazil, propagated with different types of cuttings, in three crop seasons

2013 ◽  
Vol 85 (2) ◽  
pp. 785-798
Author(s):  
NESTOR A. HEREDIA ZARATE ◽  
MARIA C. VIEIRA ◽  
LUCIANE A. TABALDI ◽  
DANILO A. HEREDIA VIEIRA ◽  
ROSIMEIRE P.G. JORGE ◽  
...  
Keyword(s):  
Analysis Of Variance ◽  
Experimental Studies ◽  
Dry Weight ◽  
Joint Analysis ◽  
Net Income ◽  
Average Yield ◽  
Fresh Weight ◽  
Crop Season ◽  
Different Types

The experimental studies were conducted in 2007-2008, 2008-2009 and 2009-2010 crop seasons, in order to know the agro-economic yield of 'Chinês' and "Macaquinho" taro clones, propagated using huge, extra, large, medium, small and tiny cormels. The harvest was done on average on 202 days after planting, in three crop seasons. Based on the joint analysis of variance carried out, it was observed that taro clones showed significant differences in the yield of fresh and dry weight of leaves, cormels, and commercial and non-commercial comels; besides, there were significant differences in yield of a crop season to another and the size of the cuttings induced significant differences in yield. In the conditions that the experiments were conducted, and considering the highest average yield of fresh weight of commercial cormels (28.69 t.ha-1) and highest net income (US $14,741.14) correspondent to the three crop seasons, it is recommended to cultivate 'Macaquinho' clone using small cuttings in propagation.

scholarly journals Commercial Greenhouse Growers Can Produce High-quality Bedding Plants in Bioplastic-based Biocontainers

2017 ◽  
Vol 27 (4) ◽  
pp. 472-481 ◽  
Author(s):  
Nicholas J. Flax ◽  
Christopher J. Currey ◽  
James A. Schrader ◽  
David Grewell ◽  
William R. Graves
Keyword(s):  
Production Systems ◽  
Growth Index ◽  
Dry Weight ◽  
High Quality ◽  
Bedding Plants ◽  
Shoot Dry Weight ◽  
Different Types ◽  
Greenhouse Growers ◽  
Container Type

Our objectives were to quantify the growth and quality of herbaceous annuals grown in different types of bioplastic-based biocontainers in commercial greenhouses and quantify producer interest in using these types of biocontainers in their production systems. Seedlings of ‘Serena White’ angelonia (Angelonia angustifolia) and ‘Maverick Red’ zonal geranium (Pelargonium ×hortorum) that had been transplanted into nine different (4.5-inch diameter) container types [eight bioplastic-based biocontainers and a petroleum-based plastic (PP) (control)] were grown at six commercial greenhouses in the upper midwestern United States. Plants were grown alongside other bedding annuals in each commercial greenhouse, and producers employed their standard crop culture practices. Data were collected to characterize growth when most plants were flowering. Questionnaires to quantify producer perceptions and interest in using bioplastic-based biocontainers, interest in different container attributes, and satisfaction were administered at select times during the experiment. Container type interacted with greenhouse to affect angelonia growth index (GI) and shoot dry weight (SDW), as well as shoot, root, and container ratings. Container type or greenhouse affected geranium GI and shoot rating, and their interaction affected SDW, and root and container ratings. These results indicate that commercial producers can grow herbaceous annuals in a range of bioplastic-based biocontainers with few or no changes to their crop culture practices.

scholarly journals Light reduction and moisture stress: effects on growth and water relations of western larch seedlings

1985 ◽  
Vol 15 (1) ◽  
pp. 72-77 ◽  
Author(s):  
Nan C. Vance ◽  
Steven W. Running
Keyword(s):  
Stomatal Closure ◽  
Biomass Accumulation ◽  
Dry Weight ◽  
Moisture Stress ◽  
Western Larch ◽  
Light Reduction ◽  
Stress Effects ◽  
Reduced Height ◽  
Terminal Bud ◽  
Nighttime Temperatures

Ten-week-old western larch (Larixoccidentalis Nutt.) seedlings were grown in a greenhouse under 70, 37, and 27% full sunlight from late July to early October. In August, seedlings under each light treatment were repetitively water stressed until predawn leaf water potential (Bψ1) reached one of three levels: no stress (> −0.4 MPa), moderate stress (−0.7 to −1.0 MPa), and severe stress (−1.5 to −1.8 MPa). Moisture stressing significantly reduced height and diameter of seedlings grown under 70% light. Light reduction reduced shoot and root biomass accumulation. A positive linear relation was found between root dry weight and light intensity. The largest seedlings (on a weight basis) received the highest light, were unstressed, and had the lowest shoot/root ratios. Terminal bud set was not affected by light reduction or moisture stressing but occurred under a 14-h photoperiod and reduced nighttime temperatures. Stressed and shaded seedlings had significantly reduced diurnal K1 and stress-cycled seedlings showed an adjustment to stressing. The K1 of unstressed seedlings was correlated with humidity deficit (ABHD), and K1 of stressed seedlings, with Bψ1, and ABHD. Maximum K1 declined with decreasing Bψ1, but not to a level indicating complete stomatal closure.

scholarly journals Competition ability of selected amenity varieties of Festuca rubra in mixture with Deschampsia caespitosa

2013 ◽  
Vol 49 (No. 2) ◽  
pp. 70-76
Author(s):  
M. Svobodová ◽  
J. Martinek ◽  
T. Králíčková ◽  
I. Našinec ◽  
J. Šantrůček
Keyword(s):  
Dry Weight ◽  
Total Weight ◽  
Festuca Rubra ◽  
Aboveground Phytomass ◽  
The Third ◽  
Deschampsia Caespitosa ◽  
Low Weight ◽  
Different Types ◽  
Competition Ability ◽  
Viable Seeds

The aim of the research was to evaluate the competition capacity and find suitable proportion of different types of Festuca rubra and Deschampsia caespitosa in grass mixtures for decorative lawns. A field experiment with Deschampsia caespitosa cv. Kometa in monoculture or in mixtures with Festuca rubra L. varieties Viktorka (ssp. trichophylla), Barborka (ssp. commutata) and Petruna (ssp. rubra) was established in Větrov in 2007. The sowing rate was 40 000 viable seeds per m<sup>2</sup> (0, 25, 50 or 75% of F. rubra). The sward was mown at 3 cm. The number and weight of tillers of the turf components were evaluated during three years. The highest number of tillers (on average 63.3 thousand/m<sup>2</sup>) and weight of the dry aboveground phytomass (on average 196 g/m<sup>2</sup>) were found with F. rubra ssp. trichophylla. Its particular tillers had the lowest dry weight (0.32 g/100 tillers). The lowest number of tillers (32.9 thousand/m<sup>2</sup>) and low weight of dry aboveground phytomass (134 g/m<sup>2</sup>) showed mixtures with F. rubra ssp. rubra, whose tiller weight was relatively high (0.42 g/100 tillers). The size of F. rubra tillers was not influenced either by the mixture composition or by vegetation years. The number of F. rubra tillers was not significantly different in the third and first vegetation year. The number of D. caespitosa tillers in monoculture decreased during the years from 45 to 30 thousand/m<sup>2</sup>, but the weight of dry aboveground phytomass increased significantly from 233 g/m<sup>2</sup> to 318 g/m<sup>2</sup>. Poor competition of D. caespitosa was found in the mixture with F. rubra ssp. commutata (on average 4% of total number of tillers and 7% of the total weight of the dry aboveground phytomass). F. rubra ssp. trichophylla was less competitive and the least competition with D. caespitosa was found in F. rubra ssp. rubra, After three years the proportion of D. caespitosa in mixtures with F. rubra ssp. rubra significantly increased to 36% of the total number of tillers and to 55% of the total weight of phytomass. Mixtures of D. caespitosa and F. rubra ssp. rubra were found to be promising for low input lawns.

Sign in / Sign up

Export Citation Format

Share Document