scholarly journals Influence of distance, geometry and number of control stations on quality of local geodetic networks for the purpose of georeferencing of rural properties

2014 ◽  
Vol 34 (2) ◽  
pp. 311-321 ◽  
Author(s):  
David Luciano Rosalen
Keyword(s):  
Statistical Tests ◽  
Distance Geometry ◽  
Geodetic Network ◽  
Maximum Distance ◽  
Baseline Length ◽  
Technical Standard ◽  
Geodetic Networks ◽  
Geodetic Control

The implementation of local geodetic networks for georeferencing of rural properties has become a requirement after publication of the Georeferencing Technical Standard by INCRA. According to this standard, the maximum distance of baselines to GNSS L1 receivers is of 20 km. Besides the length of the baseline, the geometry and the number of geodetic control stations are other factors to be considered in the implementation of geodetic networks. Thus, this research aimed to examine the influence of baseline lengths higher than the regulated limit of 20 km, the geometry and the number of control stations on quality of local geodetic networks for georeferencing, and also to demonstrate the importance of using specific tests to evaluate the solution of ambiguities and on the quality of the adjustment. The results indicated that the increasing number of control stations has improved the quality of the network, the geometry has not influenced on the quality and the baseline length has influenced on the quality; however, lengths higher than 20 km has not interrupted the implementation, with GPS L1 receiver, of the local geodetic network for the purpose of georeferencing. Also, the use of different statistical tests, both for the evaluation of the resolution of ambiguities and for the adjustment, have enabled greater clearness in analyzing the results, which allow that unsuitable observations may be eliminated.

Applications of Statistical Characteristics of Geodetic Networks

1974 ◽  
Vol 28 (5) ◽  
pp. 702-708
Author(s):  
L. A. Gale
Keyword(s):  
Observational Data ◽  
Geodetic Network ◽  
Statistical Information ◽  
Statistical Characteristics ◽  
Geodetic Networks ◽  
Control File ◽  
Geodetic Control ◽  
Inner Constraint

Numerous statistics that can be obtained from the processing of the observations and the adjustment of a geodetic network can be used to assess the quality of the network and the observational data. The processes used for assessment and planning depend on the needs and the capabilities of the user. Statistical information derived from nonsingular vis-à-vis singular (“inner-constraint”) adjustments is discussed. Standards for the characterization of the quality of networks are reviewed. Suggestions are made on the type of information that should be directly available from a geodetic control file.

scholarly journals GIScience Theory Based Assessment of Spatial Disparity of Geodetic Control Points Location

2020 ◽  
Vol 9 (3) ◽  
pp. 148
Author(s):  
Elzbieta Bielecka ◽  
Krzysztof Pokonieczny ◽  
Sylwia Borkowska
Keyword(s):  
Nearest Neighbor ◽  
Geodetic Network ◽  
Control Points ◽  
Outlier Analysis ◽  
Geodetic Networks ◽  
Land Administration ◽  
Ex Post ◽  
Spatial Cluster Analysis ◽  
Geodetic Control ◽  
Application Fields

Geodetic networks provide a spatial reference framework for the positioning of any geographical feature in a common and consistent way. An even spatial distribution of geodetic control points assures good quality for subordinate surveys in mapping, cadaster, engineering activities, and many other land administration-oriented applications. We investigate the spatial pattern of geodetic control points based on GIScience theory, especially Tobler’s Laws in Geography. The study makes contributions in both the research and application fields. By utilizing Average Nearest Neighbor, multi-distance spatial cluster analysis, and cluster and outlier analysis, it introduces the comprehensive methodology for ex post analysis of geodetic control points’ spatial patterns as well as the quantification of geodetic networks’ uniformity to regularly dense and regularly thinned. Moreover, it serves as a methodological resource and reference for the Head Office of Geodesy and Cartography, not only the maintenance, but also the further densification or modernization the geodetic network in Poland. Furthermore, the results give surveyors the ability to quickly assess the availability of geodetic points, as well as identify environmental obstacles that may hamper measurements. The results show that the base geodetic control points are evenly dispersed (one point over 50 sq. km), however they tend to cluster slightly in urbanized areas and forests (1.3 and 1.4 points per sq. km, respectively).

The Optimum Design of Geodetic Networks

1965 ◽  
Vol 19 (1) ◽  
pp. 90-91
Author(s):  
Michel Creusen ◽  
Harold J. Welch
Keyword(s):  
Computer Program ◽  
Least Squares ◽  
Optimum Design ◽  
Geodetic Network ◽  
University Of Michigan ◽  
Geodetic Networks ◽  
Least Squares Adjustment ◽  
The University

For a geodetic network, the least squares adjustment gives the best possible solution and an indication of the quality of that solution. On this basis, a computer program is being developed at the University of Michigan to determine the best and most economic configuration networks and the accuracies required in measuring.

scholarly journals Influence of the Datum Definition on the Accuracy of Horizontal Geodetic Control Networks for Engineering Objects

2019 ◽  
Vol 8 (3) ◽  
pp. 99-106
Author(s):  
Nedim Tuno ◽  
Admir Mulahusić ◽  
Jusuf Topoljak
Keyword(s):  
Geodetic Network ◽  
Control Points ◽  
Engineering Structures ◽  
Control Networks ◽  
Geometrical Distribution ◽  
Quality Of Control ◽  
Design And Implementation ◽  
Triangulation Network ◽  
Geodetic Control

For the construction of various civil engineering structures, particular care should be taken in the perspective of geodetic control. Therefore, the design and implementation of the geodetic network deserves special attention. This paper is focused on various aspects of datum definitions for tested micro-triangulation network. It was shown that the geometrical distribution of datum points in a minimally constrained solution has a great impact on the accuracy of the geodetic network. Estimates of the accuracies of individual station y-x coordinates, error circles and error ellipses, obtained by free adjustment, where the datum selection was independent of errors in fixed coordinates, revealed much better quality of control points.

Assessment Of Dry Eye Symptoms And Quality Of Sleep In Engineering Students During The Covid-19 Pandemic

2020 ◽  
Vol 11 (SPL1) ◽  
pp. 1202-1207
Author(s):  
Pavithra S ◽  
Dheepak Sundar M
Keyword(s):  
Sleep Quality ◽  
Dry Eye ◽  
Screen Time ◽  
Engineering Students ◽  
Statistical Tests ◽  
Quality Of Sleep ◽  
Cross Sectional ◽  
Eye Symptoms ◽  
Dry Eye Symptoms

To assess dry eye symptoms (DES) and quality of sleep in engineering students during the Covid19 pandemic lockdown and also to assess the association between DES and sleep quality. A cross-sectional questionnaire-based study was carried out among 396 engineering students studying in Saveetha engineering college. The study tool used was a semi-structured google form questionnaire designed for assessing digital device usage, symptoms of dry eye disease and sleep pattern. Responses were analyzed using appropriate statistical tests. Overall 64.1% attained a score of more than 10, indicating the presence of DES. 70.2% of the study population used digital screens for more than 13 hours. A statistically significant association was found between increased screen time and presence of DES(p<0.05). 64.9% had a score of >18 indicating reduced sleep quality. About 77.1% of the students with DES had reduced sleep quality, and a significant association (p<0.01) was observed between the two. During the Covid19 pandemic lockdown, there appears to be rising prevalence of DES in student population, one of the reasons being increased screen time. The sleep quality was also found to be reduced, and a significant association was found between DES and sleep quality.

Efektivitas Komunikasi Pendamping Corporate Social Responsibility (CSR)

2020 ◽  
Vol 4 (6) ◽  
pp. 894
Author(s):  
Yara Falmira Dianira
Keyword(s):  
Statistical Tests ◽  
Rank Correlation ◽  
Communication Effectiveness ◽  
Message Content ◽  
Sources Of Information ◽  
Source Information ◽  
Spearman Rank Correlation ◽  
Level Of Understanding ◽  
Corporate Social

ABSTRACT An important factor for the success of a CSR program is effective communication. Communication will be effective if it has an impact. If the information is conveyed based on the needs, then the communication will be effective. This study aims to analyze the factors which are related to the effectiveness of CSR communication. This study used a census method to approach 37 participants who received CSR programs. The Data analysis used the Spearman rank correlation for the statistical tests. The results showed that there was a correlation between factors that have the strength of CSR companion communication (level of attractiveness of the companion, quality of message content, and sources of information) which have real communication at the level of understanding of the participants of the Kertajaya Creative Destination (KCD) CSR program. In addition, there is a real correlation the factors that have the strength of CSR companion communication (the level of credibility of the companion, the source information, and the level of the recipient) and having communication at the level of attitudes of participants in the Kertajaya Creative Destination (KCD) CSR program. However, there is no real correlation between CSR companion communication factors and participant actions.Keywords :communication effectiveness, CSR, elements of communication. ABSTRAK Faktor penting dari keberhasilan program CSR adalah komunikasi yang efektif. Komunikasi dikatakan efektif jika menimbulkan dampak. Bila informasi tersampaikan sesuai dengan kebutuhan, maka komunikasi yang dijalankan efektif. Penelitian ini bertujuan untuk menganalisis efektivitas komunikasi pendamping CSR. Penelitian ini menggunakan pendekatan sensus terhadap 37 orang peserta penerima program CSR. Analisis data menggunakan uji statistik korelasi rank Spearman. Hasil penelitian menunjukkan bahwa terdapat hubungan nyata antara faktor efektivitas komunikasi pendamping CSR (derajat daya tarik pendamping, kualaitas isi pesan, dan sumber informasi)  dengan efektivitas komunikasi pada tingkat pemahaman peserta program CSR Kertajaya Creative Destination (KCD). Selain itu, terdapat hubungan nyata antara faktor efektivitas komunikasi pendamping CSR (tingkat kredibilitas pendamping, sumber informasi, dan tingkat penerima) dengan efektivitas komunikasi pada tingkat sikap peserta program CSR Kertajaya Creative Destination (KCD). Namun, tidak terdapat hubungan nyata antara faktor efektivitas komunikasi pendamping CSR dengan tindakan peserta. Kata Kunci : CSR, efektivitas komunikasi, unsur-unsur komunikasi.

scholarly journals Quality of wood in the stands of poplar clones

2008 ◽  
Vol 54 (No. 1) ◽  
pp. 9-16
Author(s):  
R. Petráš ◽  
J. Mecko ◽  
V. Nociar
Keyword(s):  
Root Mean Square Error ◽  
Systematic Error ◽  
Mean Square Error ◽  
Statistical Tests ◽  
Mean Square ◽  
Poplar Clones ◽  
Mean Diameter ◽  
Empirical Material ◽  
Relative Root

The results obtained in research on the quality of raw timber by means of the structure of assortments for the stands of poplar clones Robusta and I-214 are presented in the paper. Models for an estimation of the structure of basic assortments of poplar stands were constructed separately for each clone in dependence on mean diameter, quality of stems, and damage to stems in the stand. The clone Robusta has higher proportions of higher-quality assortments than the clone I-214. The accuracy of models was determined on empirical material. It was confirmed by statistical tests that the models did not have a systematic error. The relative root mean-square error for main assortments of the clone I-214 is 15–27% and Robusta 13–24%.

scholarly journals Research of technical characteristics of wall leveling signs in the context of the ethymology of terms

2021 ◽  
Vol 41 (I) ◽  
pp. 55-60
Author(s):  
I. TREVOHO ◽  
◽  
A. DRBAL ◽  
E. ILKIV ◽  
M. GALYARNYK ◽  
...  
Keyword(s):  
Geodetic Network ◽  
The Black Sea ◽  
Historical Sources ◽  
Term Operation ◽  
Geodetic Networks ◽  
City Environment ◽  
Technical Developments ◽  
The City ◽  
Technical Recommendations

The aim is to clarify the etymology of the terms “wall leveling mark” and “wall leveling benchmark” in the context of the historical sequence of the appearance of leveling networks in the Ukrainian lands to present the author’s view on these definitions in scientific reference and encyclopedic geodetic literature. To conduct a chronological study of the phenomenon of leveling wall signs of different structures and the corresponding technologies of binding to them in leveling networks, which were created in the Ukrainian lands during the XIX–XXI centuries. Pay attention to the fact that level marks and wall frames, which are valid (working) independent geodetic signs in leveling networks, due to long-term operation are carriers of important geodetic information. Method. To study the results of the analysis of historical sources, standards, reference, encyclopedic and scientific literature in the context of the analysis of the definitions of “level mark” and “wall benchmark” was used analysis of patterns of functioning of the relevant geodetic terminological units. Results. On the territory of Ukraine during the XIX–XXI centuries. Created a leveling (height) network [State Geodetic Network, experimental operation], which operates to this day. The functioning of the leveling (height) network is regulated by legislative acts and regulations. Thanks to the geo-portal of the DGM of Ukraine created by NDIGK, it is possible to obtain information about the preserved level signs. The peculiarity of the leveling (height) network is that it was created by different departments of different countries [Glushkov V.V., 2003] with different height systems and taking into account the access of Ukrainian lands to the Black Sea. All this led to the use of different designs of wall leveling signs and, accordingly, their interpretation, which is not sufficiently reflected in the geodetic reference and regulatory literature. Scientific novelty. The performed comprehensive analysis of information sources can serve as a basis for development of scientific and technical recommendations formonitoring of level signs ofDGMofUkraine and will allow to reveal weaknesses of their functioning which are caused by changes in vital activity of the city environment. The practical value of the work is to solve the problem of distinguishing the production characteristics of the wall leveling mark and wall leveling benchmark, which are fixed leveling signs in geodetic networks of thickening and leveling networks to develop technical developments for inspection and updating points II, leveling networks classes and geodetic networks of thickening in the context of monitoring of geodetic points of DGM of Ukraine and their corresponding representation in the scientific and reference geodetic literature.

scholarly journals Enhancing the operational efficiency of quantum random number generators

2021 ◽  
Vol 13 (2) ◽  
pp. 10-18
Author(s):  
Botond L. Márton ◽  
Dóra Istenes ◽  
László Bacsárdi
Keyword(s):  
Random Number ◽  
Statistical Tests ◽  
Practical Implementation ◽  
Random Numbers ◽  
Random Number Generators ◽  
Original Source ◽  
Negative Effect ◽  
Quantum Phenomena ◽  
The Right

Random numbers are of vital importance in today’s world and used for example in many cryptographical protocols to secure the communication over the internet. The generators producing these numbers are Pseudo Random Number Generators (PRNGs) or True Random Number Generators (TRNGs). A subclass of TRNGs are the Quantum based Random Number Generators (QRNGs) whose generation processes are based on quantum phenomena. However, the achievable quality of the numbers generated from a practical implementation can differ from the theoretically possible. To ease this negative effect post-processing can be used, which contains the use of extractors. They extract as much entropy as possible from the original source and produce a new output with better properties. The quality and the different properties of a given output can be measured with the help of statistical tests. In our work we examined the effect of different extractors on two QRNG outputs and found that witg the right extractor we can improve their quality.

scholarly journals Analisis Faktor-Faktor yang Memengaruhi Non Performing Financing di PT TAF dan Pengendaliannya

2020 ◽  
Vol 10 (2) ◽  
pp. 72-91
Author(s):  
Tri Wahyudi ◽  
Harianto ◽  
Sahara
Keyword(s):  
Service System ◽  
Statistical Tests ◽  
Descriptive Analysis ◽  
Information Service ◽  
Secondary Data ◽  
Binary Logistic Regression ◽  
Organizational Structures ◽  
Financial Information

PT TAF is one of multifinance companies in Indonesia. The increase in low segment sales from 2013-2017 with a high credit amount led to an increase in the quality of PT TAF's receivables categorized as Non Performing Financing (NPF). This increase in NPF was also accompanied by an increase in PT TAF's net loss in 2017 and affected the company's profits. Therefore an analysis is needed to find out factors that influence the amount of credit and NPF, in order to formulate the strategy to manage it. This study uses secondary data of PT TAF debtors which related to the amount of credit, debtor delays and NPF from 2013 to 2017. The approach of this study is a case study in PT TAF about the level of NPF from 2013 -2017. The method used in this study is descriptive analysis and statistical tests. Multiple linear regression is performed to determine the factors that influence the amount of credit, while binary logistic regression is carried out to determine the factors that influence NPF. The results of the analysis will be used to formulate a strategy proposal for controlling NPF at PT TAF. Factors that significantly influence the amount of the credit are vehicle price, age, loan interest, installment amount, income, down payment, type of first installment, type of vehicle, education, gender, credit package, and credit tenor. The factors that influence NPF are the amount of credit, Loan to Value (LTV), the residence area of ​​the debtor and inflation. The proposed strategy formulations are: to consider factors which affecting amount of credit in granting credit, to increase the debtor portfolio with LTV less than or equal to 80 percent, avoid low down payment and long tenor products, strengthen collection organizational structures and increase team collection capabilities, and utilize the Financial Information Service System from OJK to obtain information about the debtors.

Sign in / Sign up

Export Citation Format

Share Document