scholarly journals Diagnosis of secondary caries in esthetic restorations: influence of the incidence vertical angle of the X-ray beam

2011 ◽  
Vol 22 (2) ◽  
pp. 129-133 ◽  
Author(s):  
Patrícia Lima Moreira ◽  
Michel Reis Messora ◽  
Stela Márcia Pereira ◽  
Solange Maria de Almeida ◽  
Adriana Dibo da Cruz
Keyword(s):  
Interobserver Reliability ◽  
Negative Influence ◽  
Composite Resins ◽  
Wilcoxon Test ◽  
Vertical Angle ◽  
Human Teeth ◽  
Radiographic Images ◽  
Secondary Caries ◽  
X Ray ◽  
Significant Difference

The aim of this study was to evaluate the accuracy on the diagnosis of secondary caries-like lesions simulated on esthetic restorations of different materials, changing the incidence vertical angle (IVA) of the x-ray beam. Twenty human teeth received MOD inlay preparations. In the experimental group (n=10), a round cavity was made in the floor of the proximal box to simulate the caries-like lesion. All teeth were restored with 3 composite resins (Charisma, Filtek-Z250 and TPH-Spectrum) at 3 moments. Two radiographic images were acquired with 0º and 10º IVA. Ten observers evaluated the images using a 5-point confidence scale. Intra- and interobserver reliability was analyzed with the Interclass Correlation Coefficient and the diagnostic accuracy was evaluated using the area under the ROC curve (Az), Friedman test and Wilcoxon test (α=0.05). Higher accuracy values were obtained with 10º IVA (Az=0.66, Filtek-Z250>Az=0.56, TPH-Spectrum) compared to 0º (Az=0.55, Charisma>Az=0.37, TPH-Spectrum), though without statistically significant difference (p>0.05). The detection of secondary caries-like lesions simulated on esthetic restorations of different materials suffered no negative influence by changing the IVA of the x-ray beam.

scholarly journals Influence of "soft start" polymerization on marginal sealing in resin composite restorations

2003 ◽  
Vol 50 (2) ◽  
pp. 59-64 ◽  
Author(s):  
Larisa Blazic ◽  
Slavoljub Zivkovic
Keyword(s):  
Resin Composite ◽  
Nitrate Solution ◽  
Silver Nitrate Solution ◽  
Class Ii ◽  
Composite Resins ◽  
Human Teeth ◽  
Composite Restorations ◽  
Soft Start ◽  
Significant Difference ◽  
Bonding Systems

The purpose of this study was to evaluate the marginal microleakage in Class II with different materials in resin composite restorations cured by using "soft start" and standard polymerization techniques. Two adhesive Class II cavities were prepared in 50 human teeth with enamel in-between. Samples were divided into 5 groups and filled with composite resins, compatible flow resin composites and bonding systems. The ocluso-mesial restorations were cured with standard curing technique, and the ocluso-distal restorations were cured with "soft start" curing technique. After thermocycling, the teeth were immersed in silver nitrate solution and sectioned for leakage evaluation. The results pointed out, after "soft start" and standard curing techniques, that the best marginal behavior in Class II restorations was obtained with Tetric Ceram / Tetric Flow composite resins, then with Filtek Z 250 / Filtek Flow, followed by Admira Admira Flow and Point / Revolution composite materials. The deepest dye penetration was found in cavities with Diamond Lite / Diamond Link composite restorations. No statistically significant difference was found in the tested composite resin restorations, whether treated with "soft start" polymerization or with standard polymerization technique, in regard to marginal micro leakage.

Effect of Postoperative Bleaching on Marginal Leakage of Resin Composite and Resin-Modified Glass Ionomer Restorations at Different Delayed Periods of Exposure to Carbamide Peroxide

2009 ◽  
Vol 10 (6) ◽  
pp. 9-16 ◽  
Author(s):  
Horieh Moosavi ◽  
Marjaneh Ghavamnasiri ◽  
Vahideh Manari
Keyword(s):  
Resin Composite ◽  
Wilcoxon Test ◽  
Filling Material ◽  
Glass Ionomer ◽  
Carbamide Peroxide ◽  
Control Groups ◽  
Human Teeth ◽  
Composite Restorations ◽  
Significant Difference ◽  
Resin Modified Glass Ionomer

Abstract Aim To evaluate the effect of dental bleaching with carbamide peroxide at different exposure times on the microleakage of resin composite and resin-modified glass ionomer restorations after placement in extracted human teeth. Methods and Materials 120 Class V cavity preparations were placed at the cementoenamel junction (CEJ) of human teeth. Half of the cavities were restored with Filtek P60 resin composite(C) and the other half were restored with Fuji II LC resin-modified glass ionomer (G). Each group was randomly divided into four subgroups (n=15). Groups C1 and G1 were not bleached and stored in artificial saliva at 37°C to serve as control groups, while in Groups C2 and G2, C3 and G3, and C4 and G4 specimens were exposed to a 15% carbamide peroxide gel for one day, one week, and two weeks, respectively, following the placement of restorations. Microleakage was assessed using the dye penetration method. Data were analyzed using the Kruskal-Wallis and Wilcoxon tests (p=0.05). Results The Kruskal-Wallis test showed no significant difference among all groups of composite or glass ionomer restorations with either enamel or dentinal margins with regard to microleakage (p>0.05). The Wilcoxon test revealed more marginal leakage in the enamel/ glass ionomer margins than the enamel/ composite margins (p<0.05). In comparisons within each group, the Wilcoxon test showed there was more microleakage in dentinal margins of composite restorations than in the enamel margins in the test groups (p<0.05). The dentinal margins of the glass ionomer in control groups showed more leakage than the enamel margins, but after the bleaching procedure all experimental groups showed statistically similar microleakage in both the enamel and dentinal margins (p>0.05). Conclusions Postoperative bleaching with carbamide peroxide could increase microleakage in the dentinal margins of composite and the enamel margins of resin-modified glass ionomer restorations. Clinical Significance Rebonding of resin composite restorations should be considered following bleaching with 15% carbamide peroxide in order to reseal the margins. Resin-modified glass ionomer is not suitable as a filling material before bleaching because of its susceptibility to increased microleakage. Citation Moosavi H, Ghavamnasiri M, Manari V. Effect of Postoperative Bleaching on Marginal Leakage of Resin Composite and Resin-Modified Glass Ionomer Restorations at Different Delayed Periods of Exposure to Carbamide Peroxide. J Contemp Dent Pract [Internet]. 2009 Nov; 10(6):009-016. Available from: http://www.thejcdp. com/journal/view/volume10-issue6-moosavi.

scholarly journals Effect of Postoperative Bleaching on Marginal Leakage of Resin Composite and Resin-Modified Glass Ionomer Restorations at Different Delayed Periods of Exposure to Carbamide Peroxide

2009 ◽  
Vol 10 (6) ◽  
pp. 1-8
Author(s):  
Horieh Moosavi ◽  
Marjaneh Ghavamnasiri ◽  
Vahideh Manari
Keyword(s):  
Resin Composite ◽  
Wilcoxon Test ◽  
Filling Material ◽  
Glass Ionomer ◽  
Carbamide Peroxide ◽  
Control Groups ◽  
Human Teeth ◽  
Composite Restorations ◽  
Significant Difference ◽  
Resin Modified Glass Ionomer

Abstract Aim To evaluate the effect of dental bleaching with carbamide peroxide at different exposure times on the microleakage of resin composite and resin-modified glass ionomer restorations after placement in extracted human teeth. Methods and Materials 120 Class V cavity preparations were placed at the cementoenamel junction (CEJ) of human teeth. Half of the cavities were restored with Filtek P60 resin composite(C) and the other half were restored with Fuji II LC resin-modified glass ionomer (G). Each group was randomly divided into four subgroups (n=15). Groups C1 and G1 were not bleached and stored in artificial saliva at 37°C to serve as control groups, while in Groups C2 and G2, C3 and G3, and C4 and G4 specimens were exposed to a 15% carbamide peroxide gel for one day, one week, and two weeks, respectively, following the placement of restorations. Microleakage was assessed using the dye penetration method. Data were analyzed using the Kruskal-Wallis and Wilcoxon tests (p=0.05). Results The Kruskal-Wallis test showed no significant difference among all groups of composite or glass ionomer restorations with either enamel or dentinal margins with regard to microleakage (p>0.05). The Wilcoxon test revealed more marginal leakage in the enamel/ glass ionomer margins than the enamel/ composite margins (p<0.05). In comparisons within each group, the Wilcoxon test showed there was more microleakage in dentinal margins of composite restorations than in the enamel margins in the test groups (p<0.05). The dentinal margins of the glass ionomer in control groups showed more leakage than the enamel margins, but after the bleaching procedure all experimental groups showed statistically similar microleakage in both the enamel and dentinal margins (p>0.05). Conclusions Postoperative bleaching with carbamide peroxide could increase microleakage in the dentinal margins of composite and the enamel margins of resin-modified glass ionomer restorations. Clinical Significance Rebonding of resin composite restorations should be considered following bleaching with 15% carbamide peroxide in order to reseal the margins. Resin-modified glass ionomer is not suitable as a filling material before bleaching because of its susceptibility to increased microleakage. Citation Moosavi H, Ghavamnasiri M, Manari V. Effect of Postoperative Bleaching on Marginal Leakage of Resin Composite and Resin-Modified Glass Ionomer Restorations at Different Delayed Periods of Exposure to Carbamide Peroxide. J Contemp Dent Pract [Internet]. 2009 Nov; 10(6):009-016. Available from: http://www.thejcdp. com/journal/view/volume10-issue6-moosavi.

scholarly journals Influence of Image Filters and Variation in Horizontal Angle of Incidence of X-ray Beam in Digital Interproximal Radiographs for Diagnosis of Secondary Caries in Esthetic Restorations

2015 ◽  
Vol 16 (10) ◽  
pp. 805-812 ◽  
Author(s):  
Lucas de Carvalho Deprá ◽  
Lilian Cristina Vessoni Iwaki ◽  
Mariliani Chicarelli ◽  
Wilton Mitsunari Takeshita
Keyword(s):  
High Speed ◽  
Tooth Surface ◽  
Angle Of Incidence ◽  
Lower Efficiency ◽  
Secondary Caries ◽  
X Ray ◽  
Horizontal Angle ◽  
Significant Difference ◽  
Image Filters ◽  
Caries Lesions

ABSTRACT Background Secondary or recurrent caries are located around restoration margins or under these lesions, and can lead to tooth loss. The interproximal or bite wing radiograph is the technique of choice to assist diagnosis of secondary caries. Objective To evaluate diagnostic accuracy of secondary caries in pulpal walls artificially created in extracted human premolars, observed in digital bitewing radiographs using variations in horizontal X-ray beam angle of incidence and application of enhancement filters. Materials and methods The sample consisted of 20 healthy premolars, in which secondary caries lesions were simulated by means of subjecting the pulpal wall of the cavity to wear with spherical carbide drill half, fitted to a high speed handpiece, under constant cooling, focused perpendicular to the tooth surface. The orifices were filled with wax and all teeth were restored with composite resin Filtek Z350 XT®. Later teeth were radiographed with a digital sensor complementary metal-oxidesemiconductor (CMOS) varying the horizontal angle at intervals of 2°, covering a range of −10 to +10°. Results The results showed that in the diagnosis of secondary caries, there was no statistically significant difference between the 2 pseudocolor filters, and negative and direct digital radiography. The pseudocolor filter no. 1 showed statistically significant differences, except at a horizontal angle of 0°, thus indicating lower efficiency in the diagnosis of secondary caries. Conclusion Secondary caries with esthetic pulp wall restoration can be diagnosed irrespective of variation in the horizontal angle of incidence of the X-ray beam. The use of different radiographic enhancement filters did not result in improved diagnosis of secondary caries. How to cite this article Deprá LC, Iwaki LCV, Chicarelli M, Takeshita WM. Influence of Image Filters and Variation in Horizontal Angle of Incidence of X-ray Beam in Digital Interproximal Radiographs for Diagnosis of Secondary Caries in Esthetic Restorations. J Contemp Dent Pract 2015;16(10): 805-812.

scholarly journals Clinical and radiological follow-up after free vascularised fibula transplantation for bone defects of the upper extremity with MRI and MR-angiography

2019 ◽  
Author(s):  
Lisa Eckstein ◽  
Ariane Asmus ◽  
Sven Mutze ◽  
Sinan Bakir ◽  
Lyubomir Haralambiev ◽  
...  
Keyword(s):  
Contrast Agent ◽  
Upper Extremity ◽  
Bone Healing ◽  
Pearson Correlation ◽  
Wilcoxon Test ◽  
X Ray ◽  
Significant Difference ◽  
Vascular Patency ◽  
Healing Score

Abstract Background Vascular patency of free vascularised fibula grafts can be postoperatively assessed by island flap which is not always possible or angiography which is invasive. Bone healing is examined based on radiographs with scoring systems. We present data on MRI with contrast agent and a comparison of the Giessler bone healing score by X-ray and MRI and clinical scores in patients with operation on the upper extremity. Methods We reviewed the clinical and radiological outcome of 13 patients with a follow-up of at least 1 year after free vascularised fibula graft of the upper extremity. The examination included the DASH, MSTS, SF-36, Rosén-Lundberg-scores and MRI with contrast agent. We determined the Giessler bone healing score by most recent x-ray and MRI and the Weiland score and its modification for the upper extremity. For statistics, we used the Wilcoxon test and Pearson correlation. Results Vascular patency was directly or indirectly detectable all cases in the MRI with contrast agent. 5 patients did not return to work and 5 patients had ongoing pain medication. Median DASH was 21.7, MSTS of the upper extremity 76.7, of the lower extremity 93.3, the Rosén-Lundberg score for median nerve 2.43, for ulnar nerve 2.32. Giessler score for x-ray and MRI showed no significant difference for proximal or distal junction. Conclusions We could prove with MRI that it was indeed a vascularised graft and its vitality at time of follow-up by assessment of vascular patency, and that MRI can be used to determine the Giessler score similarly to X-ray.

scholarly journals Evaluation of mandibular implant sites: correlation between panoramic and linear tomography

2003 ◽  
Vol 14 (3) ◽  
pp. 209-213 ◽  
Author(s):  
Maria Ivete Bolzan Rockenbach ◽  
Maria Carméli Correia Sampaio ◽  
Lino João da Costa ◽  
Nilza Pereira da Costa
Keyword(s):  
Statistical Evaluation ◽  
Panoramic Radiography ◽  
Safety Margin ◽  
Mental Foramen ◽  
Wilcoxon Test ◽  
Limit Set ◽  
Linear Measurements ◽  
Radiographic Images ◽  
X Ray

The reliability of the linear tomography and panoramic radiography made with X-ray equipment was evaluated (Vera View Scope X-600; Morita). The sample was composed of 20 dry human hemimandibles, in which the area selected for analysis was 1.5 cm distal from the limit set before the mental foramen. Four measurements were made. The images obtained were drawn on acetate paper and the hemimandibles cut at the demarcated area. The measurements were made using a digital electronic pachymeter. The values found for the radiographic images were compared to those obtained in the mandibular specimens and submitted to statistical evaluation by the Wilcoxon test. It was concluded that both techniques were reliable for the accomplishment of vertical linear measurements in the selected area. However, a 2.0 mm safety margin is recommended.

Effectiveness Of Toilet Training Education On Mother's Behavior And Toddler Age Toilet Training Ability (18-36 Months)

2020 ◽  
Vol 5 (2) ◽  
pp. 49-55
Author(s):  
Hafiko Andresni ◽  
Zahtamal Zahtamal ◽  
Winda Septiani ◽  
Mitra Mitra ◽  
Lita Lita
Keyword(s):  
Sampling Technique ◽  
T Test ◽  
The Body ◽  
Toilet Training ◽  
Wilcoxon Test ◽  
Control Group ◽  
Maternal Knowledge ◽  
Control Group Design ◽  
Significant Difference

ABSTRACT Toilet training is an effort to train children to be able to control and urinate (BAK) and defecate (BAB). Toilet training is one of the main tasks of children at toddler age. Toilet training is one of the main tasks of children in toddler age which is very important to be done to create independence in children in controlling BAK and BAB and children know the parts of the body and their functions. Data in 2012 shows that ± 60% of parents do not teach toilet training to children from an early age. The aim of the study was to find out the effectiveness of toilet training education on maternal behavior and toilet skills in toddler age training (18-36 months). The study was conducted in July-August 2018. This type of quantitative research used the design of the Quasy pretest and posttest experiment with non-equivalent control group design. Samples were 36 mothers and 36 children with purposive sampling technique. Data analysis used Paired t test, Wilcoxon test, Man-Whitney test an Independent t test. The results showed that toilet training education through lecture methods, modules and maze games was more effective than toilet training education through lecture and leaflet methods on children's knowledge and abilities. Conversely, for the role of mothers in supervision there is no significant difference in effectiveness. Health education is recommended in health promotion programs to increase maternal knowledge, the role of mothers and the ability of toilet training children independently. Keywords: Toilet training, Lecture method, Module, Maze game, Leaflet, Knowledge, Role of mother, Children's ability.

scholarly journals Can the cytokine adsorber CytoSorb® help to mitigate cytokine storm and reduce mortality in critically ill patients? A propensity score matching analysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Christina Scharf ◽  
Ines Schroeder ◽  
Michael Paal ◽  
Martin Winkels ◽  
Michael Irlbeck ◽  
...  
Keyword(s):  
Propensity Score ◽  
Critically Ill ◽  
Critically Ill Patients ◽  
Wilcoxon Test ◽  
Relative Reduction ◽  
Cytokine Storm ◽  
Saps Ii ◽  
Significant Difference ◽  
Group 2 ◽  
Group 1

Abstract Background A cytokine storm is life threatening for critically ill patients and is mainly caused by sepsis or severe trauma. In combination with supportive therapy, the cytokine adsorber Cytosorb® (CS) is increasingly used for the treatment of cytokine storm. However, it is questionable whether its use is actually beneficial in these patients. Methods Patients with an interleukin-6 (IL-6) > 10,000 pg/ml were retrospectively included between October 2014 and May 2020 and were divided into two groups (group 1: CS therapy; group 2: no CS therapy). Inclusion criteria were a regularly measured IL-6 and, for patients allocated to group 1, CS therapy for at least 90 min. A propensity score (PS) matching analysis with significant baseline differences as predictors (Simplified Acute Physiology Score (SAPS) II, extracorporeal membrane oxygenation, renal replacement therapy, IL-6, lactate and norepinephrine demand) was performed to compare both groups (adjustment tolerance: < 0.05; standardization tolerance: < 10%). U-test and Fisher’s-test were used for independent variables and the Wilcoxon test was used for dependent variables. Results In total, 143 patients were included in the initial evaluation (group 1: 38; group 2: 105). Nineteen comparable pairings could be formed (mean initial IL-6: 58,385 vs. 59,812 pg/ml; mean SAPS II: 77 vs. 75). There was a significant reduction in IL-6 in patients with (p < 0.001) and without CS treatment (p = 0.005). However, there was no significant difference (p = 0.708) in the median relative reduction in both groups (89% vs. 80%). Furthermore, there was no significant difference in the relative change in C-reactive protein, lactate, or norepinephrine demand in either group and the in-hospital mortality was similar between groups (73.7%). Conclusion Our study showed no difference in IL-6 reduction, hemodynamic stabilization, or mortality in patients with Cytosorb® treatment compared to a matched patient population.

scholarly journals Crystal structure of pimecrolimus Form B, C43H68ClNO11

2021 ◽  
Vol 36 (1) ◽  
pp. 35-42
Author(s):  
Shivang Bhaskar ◽  
Joseph T. Golab ◽  
James A. Kaduk ◽  
Amy M. Gindhart ◽  
Thomas N. Blanton
Keyword(s):  
Crystal Structure ◽  
Powder Diffraction ◽  
Density Functional ◽  
Van Der Waals Interactions ◽  
Powder Diffraction File ◽  
X Ray ◽  
Weak Intermolecular Interactions ◽  
Significant Difference ◽  
Atomic Coordinates ◽  
Solid State Conformation

The crystal structure of pimecrolimus Form B has been solved and refined using synchrotron X-ray powder diffraction data and optimized using density functional techniques. Pimecrolimus crystallizes in the space group P21 (#4) with a = 15.28864(7), b = 13.31111(4), c = 10.95529(5) Å, β = 96.1542(3)°, V = 2216.649(9) Å3, and Z = 2. Although there are an intramolecular six-ring hydrogen bond and some larger chain and ring patterns, the crystal structure is dominated by van der Waals interactions. There is a significant difference between the conformation of the Rietveld-refined and the DFT-optimized structures in one portion of the macrocyclic ring. Although weak, intermolecular interactions are apparently important in determining the solid-state conformation. The powder pattern is included in the Powder Diffraction File™ (PDF®) as entry 00-066-1619. This study provides the atomic coordinates to be added to the PDF entry.

Visualizing Fluid Flows With X-Rays

2007 ◽  
Author(s):  
Theodore J. Heindel ◽  
Terrence C. Jensen ◽  
Joseph N. Gray
Keyword(s):  
Computed Tomography ◽  
Flow Visualization ◽  
Three Dimensional ◽  
Fluid Flows ◽  
X Rays ◽  
Radiographic Images ◽  
Optical Access ◽  
X Ray ◽  
X Ray Computed ◽  
Density Map

There are several methods available to visualize fluid flows when one has optical access. However, when optical access is limited to near the boundaries or not available at all, alternative visualization methods are required. This paper will describe flow visualization using an X-ray system that is capable of digital X-ray radiography, digital X-ray stereography, and digital X-ray computed tomography (CT). The unique X-ray flow visualization facility will be briefly described, and then flow visualization of various systems will be shown. Radiographs provide a two-dimensional density map of a three dimensional process or object. Radiographic images of various multiphase flows will be presented. When two X-ray sources and detectors simultaneously acquire images of the same process or object from different orientations, stereographic imaging can be completed; this type of imaging will be demonstrated by trickling water through packed columns and by absorbing water in a porous medium. Finally, local time-averaged phase distributions can be determined from X-ray computed tomography (CT) imaging, and this will be shown by comparing CT images from two different gas-liquid sparged columns.

Sign in / Sign up

Export Citation Format

Share Document