scholarly journals UNDERSTANDING PLANT DENSITY EFFECTS ON MAIZE GROWTH AND DEVELOPMENT: AN IMPORTANT ISSUE TO MAXIMIZE GRAIN YIELD

2001 ◽  
Vol 31 (1) ◽  
pp. 159-168 ◽  
Author(s):  
Luís Sangoi
Keyword(s):  
Grain Yield ◽  
Plant Density ◽  
Plant Traits ◽  
Yield Potential ◽  
Grass Species ◽  
Carbon And Nitrogen ◽  
Plant Densities ◽  
Female Flowering ◽  
Number Of Individuals ◽  
Maturity Rating

Maize is the agronomic grass species that is most sensitive to variations in plant density. For each production system, there is a population that maximizes grain yield. This article presents an overview of the factors that affect optimum plant population, emphasizingthe effects of dense stands on ear development and discussing important changes in plant traits that have contributed to increase the tolerance of modern hybrids to high plant densities. Population for maize maximum economic grain yield varies from 30,000 to over 90,000pl.ha-1, depending on water availability, soil fertility, maturity rating, planting date and row spacing. When the number of individuals per area is increased beyond the optimum plant density, there is a series of consequences that are detrimental to ear ontogeny and result in barrenness. First, ear differentiation is delayed in relation to tassel differentiation. Later-initiated earshoots have a reduced growth rate, resulting in fewer spikelet primordia transformed into functional florets by the time of flowering. Functional florets extrude silks slowly, decreasing the number of fertilized spikelets due to the lack of synchrony between anthesis and silking. Limitations in carbon and nitrogen supply to the ear stimulate young kernel abortion immediately after fertilization. Availability of earlier hybrids, with shorter plant height, lower leaf number, upright leaves, smaller tassels and better synchrony between male and female flowering time has enhanced the ability of maize to face high plant populations without showing excessive barrenness. Improved endurance in high stands has allowed maize to intercept and use solar radiation more efficiently, contributing to the remarkable increase in grain yield potential experienced by this crop.

Comparative Response of Conventional and Quality Protein Maize Hybrids to High Population Densities in the Southern Guinea Savanna of Nigeria

2013 ◽  
Vol 2 (1) ◽  
Author(s):  
O B Bello
Keyword(s):  
Grain Yield ◽  
Plant Density ◽  
Plant Population ◽  
Yield Potential ◽  
High Yield ◽  
Quality Protein Maize ◽  
Population Densities ◽  
Higher Plant ◽  
Guinea Savanna ◽  
Plant Densities

Optimum plant population is very important in enhancing high and stable grain yield especially in quality protein maize (QPM) production. A field trial was therefore conducted to compare the performance of six hybrids (three each of QPM and normal endosperm) at three population densities using a split-plot design at the sub-station of the Lower Niger River Basin Development Authority, Oke-Oyi, in the southern Guinea savanna zone of Nigeria during the 2010 and 2011 cropping seasons. Plant population -1 densities (53,333, 66,666, and 88,888 plants ha ) constituted the main plots and the six hybrids were assigned to the subplots, replicated three times. Our results showed a differential response of maize -1 hybrids to high densities, with plant populations above 53,333 plants ha reduced grain yield, and this is more pronounced in QPM than normal endosperm hybrids. This is contrary to the results observed in many other countries. This might be that the hybrids were selected in low yield potential area at low plant densities, and hence not tolerant to plant density stress. It may also be due to low yield potential of the experimental site, which does not allow yield increases at high plant densities. Though normal endosperm hybrids 0103-11 and 0103-15 as well as QPM Dada-ba were superior for grain yield among -1 the hybrids at 53,333 plants ha , hybrid 0103-11 was most outstanding. Therefore, genetic improvement of QPM and normal endosperm hybrids for superior stress tolerance and high yield could be enhanced by selection at higher plant population densities.

scholarly journals Plant density and nitrogen topdressing of high-altitude main-season corn

2021 ◽  
Vol 42 (5) ◽  
pp. 2651-2668
Author(s):  
Denis Piazzoli ◽  
◽  
Moryb Jorge Lima da Costa Sapucay ◽  
André Mateus Prando ◽  
João Alberto de Oliveira Júnior ◽  
...  
Keyword(s):  
Grain Yield ◽  
High Altitude ◽  
Plant Height ◽  
Plant Density ◽  
N Fertilization ◽  
Stem Diameter ◽  
Yield Potential ◽  
High Yield ◽  
Corn Yield ◽  
Plant Densities

An appropriate combination of plant density with nitrogen (N) fertilization can optimize corn growth and increase grain yields. This study evaluated the effects of nitrogen topdressing rates and plant density levels on the agronomic performance of corn. The early hybrid DKB 240 YG, with high yield potential and stability, was evaluated in two summer crops in Mauá da Serra, Paraná (950 m asl), in a Cfb climate, on a Rhodic Eutrudox. The experiment was arranged in randomized complete blocks and subdivided plots with four replications. The plant densities (60,000; 75,000; 90,000 and 105,000 plants ha-1) were assessed in the plots and the nitrogen (ammonium nitrate 32% N) topdressing rates (0, 60, 120, 180 and 240 kg ha-1) in the subplots. The stem diameter, plant height, ear insertion height and grain yield were evaluated. The stem diameter, plant height, ear insertion height and grain yield were influenced by the interaction between plant density and nitrogen topdressing under the tested high-altitude edaphoclimatic conditions. The stem diameter of corn plants decreased due to the increase in plant density whereas nitrogen topdressing attenuated this reduction. Maximum plant height was observed at a density of 75,000 plants ha-1 associated with a topdressing of 169 kg ha-1 of N, and highest ear insertion at 60,000 plants ha-1 and 168 kg ha-1 of N. Corn yield was highest at a density of 105,000 plants ha-1 associated with a topdressing of 185 kg N ha-1 of N.

scholarly journals PLANT DENSITY AND NITROGEN FERTILIZATION ON COMMON BEAN NUTRITION AND YIELD

2017 ◽  
Vol 30 (3) ◽  
pp. 670-678 ◽  
Author(s):  
ROGÉRIO PERES SORATTO ◽  
TIAGO ARANDA CATUCHI ◽  
EMERSON DE FREITAS CORDOVA DE SOUZA ◽  
JADER LUIS NANTES GARCIA
Keyword(s):  
Grain Yield ◽  
Common Bean ◽  
Nitrogen Fertilization ◽  
Dry Matter ◽  
Plant Density ◽  
N Fertilization ◽  
N Concentration ◽  
Plant Densities ◽  
N Rates ◽  
Lower Plant

ABSTRACT The objective of this work was to evaluate the effect of plant densities and sidedressed nitrogen (N) rates on nutrition and productive performance of the common bean cultivars IPR 139 and Pérola. For each cultivar, a randomized complete block experimental design was used in a split-plot arrangement, with three replicates. Plots consisted of three plant densities (5, 7, and 9 plants ha-1) and subplots of five N rates (0, 30, 60, 120, and 180 kg ha-1). Aboveground dry matter, leaf macro- and micronutrient concentrations, yield components, grain yield, and protein concentration in grains were evaluated. Lower plant densities (5 and 7 plants m-1) increased aboveground dry matter production and the number of pods per plant and did not reduce grain yield. In the absence of N fertilization, reduction of plant density decreased N concentration in common bean leaves. Nitrogen fertilization linearly increased dry matter and leaf N concentration, mainly at lower plant densities. Regardless of plant density, the N supply linearly increased grain yield of cultivars IPR 139 and Pérola by 17.3 and 52.2%, respectively.

Response of pigeon pea (Cajanus cajan (L.) Millsp.) to plant density and phosphorus fertilizer under dryland conditions

1981 ◽  
Vol 97 (1) ◽  
pp. 119-124 ◽  
Author(s):  
I. P. S. Ahlawat ◽  
C. S. Saraf
Keyword(s):  
Grain Yield ◽  
Shoot Growth ◽  
Plant Density ◽  
Sandy Loam ◽  
Phosphate Fertilizer ◽  
Pigeon Pea ◽  
Phosphorus Fertilizer ◽  
Total N ◽  
Root And Shoot Growth ◽  
Plant Densities

SUMMARYField studies were made for 2 years on a sandy loam soil under dryland conditions of north-west India with three pigeon-pea varieties in relation to plant density and the application of phosphate fertilizer. Varieties Pusa Ageti and P4785 with better developed root system and profuse nodulation had higher grain and stalk yield, and higher N and P yield than Prabhat. Root and shoot growth and root nodulation were adversely affected with increasing plant densities in the range 50 × 103 and 150 × 103 plants/ha. Stalk and total N and P yield increased with increasing plant density. Plant density of 117 × 103 plants/ha produced maximum grain yield of 1·53 t/ha. Phosphorus fertilizer promoted root and shoot growth, intensity and volume of nodulation and increased grain, stalk, N and P yield. The effect of plant density on grain yield was more pronounced in the presence of phosphate fertilizer. The economic optimum rate of P ranged between 22·1 and 23·1 kg/ha under different plant densities.

scholarly journals Patterns of tillering and grain production of winter wheat at a wide range of plant densities.

1978 ◽  
Vol 26 (4) ◽  
pp. 383-398 ◽  
Author(s):  
A. Darwinkel
Keyword(s):  
Winter Wheat ◽  
Grain Yield ◽  
Harvest Index ◽  
Plant Density ◽  
Fold Increase ◽  
Grain Production ◽  
Higher Plant ◽  
Grain Number ◽  
Wide Range ◽  
Plant Densities

The effect of plant density on the growth and productivity of the various ear-bearing stems of winter wheat was studied in detail to obtain information on the pattern of grain production of crops grown under field conditions. Strong compensation effects were measured: a 160-fold increase in plant density (5-800 plants/m2) finally resulted in a 3-fold increase in grain yield (282 to 850 g DM/m2). Max. grain yield was achieved at 100 plants/m2, which corresponded to 430 ears/m2 and to about 19 000 grains/m2. At higher plant densities more ears and more grains were produced, but grain yield remained constant. Tillering/plant was largely favoured by low plant densities because these allowed tiller formation to continue for a longer period and a greater proportion of tillers produced ears. However, at higher plant densities more tillers/unit area were formed and, despite a higher mortality, more ears were produced. The productivity of individual ears, from main stems as well as from tillers, decreased with increasing plant density and with later emergence of shoots. In the range from 5 to 800 plants/m2 grain yield/ear decreased from 2.40 to 1.14 g DM. At 800 plants/m2 nearly all ears originated from main stems, but with decreasing plant density tillers contributed increasingly to the number of ears. At 5 plants/m2, there were 23 ears/plant and grain yield/ear ranged from 4.20 (main stem) to 1.86 g DM (late-formed stems). Grain number/ear was reduced at higher densities and on younger stems, because there were fewer fertile spikelets and fewer grains in these spikelets. At the low density of 5 plants/m2, plants developed solitarily and grain yield/ear was determined by the number of grains/ear as well as by grain wt. Above 400 ears/m2, in this experiment reached at 100 plants/m2 and more, grain yield/ear depended solely on grain number, because the wt. of grains of the various stems were similar. The harvest index showed a max. of about 44% at a moderate plant density; at this density nearly max. grain yield was achieved. At low plant densities the harvest index decreased from 45% in main stems to about 36% in late-formed stems. However, no differences in harvest index existed between the various ear-bearing stems if the number of ears exceeded 400/m2. (Abstract retrieved from CAB Abstracts by CABI’s permission)

scholarly journals Threshold Tolerance of New Genotypes of Pennisetum glaucum (L.) R. Br. to Salinity and Drought

Agronomy ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 230 ◽  
Author(s):  
Kristina Toderich ◽  
Elena Shuyskaya ◽  
Zulfira Rakhmankulova ◽  
Roman Bukarev ◽  
Temur Khujanazarov ◽  
...  
Keyword(s):  
Grain Yield ◽  
Crop Production ◽  
Plant Density ◽  
Pennisetum Glaucum ◽  
Germination Rate ◽  
Malonic Dialdehyde ◽  
Carotenoid Biosynthesis ◽  
Soil Salinization ◽  
Yield Potential ◽  
Grain Yields

With continued population growth, increasing staple crop production is necessary. However, in dryland areas, this is negatively affected by various abiotic stresses, such as drought and salinity. The field screening of 10 improved genetic lines of pear millet originating from African dryland areas was conducted based on a set of agrobiological traits (i.e., germination rate, plant density, plant maturity rate, forage, and grain yields) in order to understand plant growth and its yield potential responses under saline environments. Our findings demonstrated that genotype had a significant impact on the accumulation of green biomass (64.4% based on two-way ANOVA), while salinity caused reduction in grain yield value. HHVBC Tall and IP 19586 were selected as the best-performing and high-yielding genotypes. HHVBC Tall is a dual purpose (i.e., forage and grain) line which produced high grain yields on marginal lands, with soil salinization up to electrical conductivity (EC) 6–8 dS m−1 (approximately 60–80 mM NaCl). Meanwhile, IP 19586, grown under similar conditions, showed a rapid accumulation of green biomass with a significant decrease in grain yield. Both lines were tolerant to drought and sensitive to high salinity (above 200 mM NaCl). The threshold salinity of HHVBC Tall calculated at the seedling stage was lower than that of IP 19586. Seedling viability of these lines was affected by oxidative stress and membrane peroxidation, and they had decreased chlorophyll and carotenoid biosynthesis. This study demonstrated that ionic stress is more detrimental for the accumulation of green and dry biomass, in combination with increasing the proline and malonic dialdehyde (MDA) contents of both best-performing pearl millet lines, as compared with osmotic stress.

scholarly journals Unveiling the Actual Functions of Awns in Grasses: From Yield Potential to Quality Traits

2020 ◽  
Vol 21 (20) ◽  
pp. 7593
Author(s):  
Fabrice Ntakirutimana ◽  
Wengang Xie
Keyword(s):  
Grain Yield ◽  
Morphological Characteristics ◽  
Grain Filling ◽  
Yield Potential ◽  
Grass Species ◽  
Genetic Associations ◽  
Potential Yield ◽  
Yield And Quality ◽  
Advance Research ◽  
Favorable Conditions

Awns, which are either bristles or hair-like outgrowths of lemmas in the florets, are one of the typical morphological characteristics of grass species. These stiff structures contribute to grain dispersal and burial and fend off animal predators. However, their phenotypic and genetic associations with traits deciding potential yield and quality are not fully understood. Awns appear to improve photosynthesis, provide assimilates for grain filling, thus contributing to the final grain yield, especially under temperature- and water-stress conditions. Long awns, however, represent a competing sink with developing kernels for photosynthates, which can reduce grain yield under favorable conditions. In addition, long awns can hamper postharvest handling, storage, and processing activities. Overall, little is known about the elusive role of awns, thus, this review summarizes what is known about the effect of awns on grain yield and biomass yield, grain nutritional value, and forage-quality attributes. The influence of awns on the agronomic performance of grasses seems to be associated with environmental and genetic factors and varies in different stages of plant development. The contribution of awns to yield traits and quality features previously documented in major cereal crops, such as rice, barley, and wheat, emphasizes that awns can be targeted for yield and quality improvement and may advance research aimed at identifying the phenotypic effects of morphological traits in grasses.

Effect of plant density on grain yield and yield stability of sorghum hybrids differing in maturity

1990 ◽  
Vol 30 (2) ◽  
pp. 257 ◽  
Author(s):  
LJ Wade ◽  
ACL Douglas
Keyword(s):  
Grain Yield ◽  
Plant Density ◽  
Maximum Yield ◽  
Yield Stability ◽  
Early Maturity ◽  
Yield Level ◽  
Wide Range ◽  
Plant Densities ◽  
The Stability ◽  
Sorghum Grain

The extent and significance of the maturity x density interaction in dryland grain sorghum, and its implications for yield stability, were examined for 3 hybrids over 6 locations. Site mean grain yield ranged from 0.44 to 4.96 t/ha. Early maturity was superior in environments truncated by water stress, while late maturity was superior in favourable environments. Mid-season maturity provided greater stability of grain yield. Maximum yield by each hybrid at each yield level did not differ significantly from yield at a density of 75 000 plants/ha. The highest grain yields should be obtained with plant densities of 50000-100000 plants/ha under rainfed conditions, where yield expectations range from 0 to 5.0 t/ha. The results demonstrate the stability of sorghum grain yield over a wide range of plant density and crop maturity. Regression analysis aided data presentation and interpretation.

Early generation selection in wheat. I. Yield potential

1989 ◽  
Vol 40 (6) ◽  
pp. 1117 ◽  
Author(s):  
KJ Quail ◽  
RA Fischer ◽  
JT Wood
Keyword(s):  
Grain Yield ◽  
Plant Traits ◽  
Genotypic Variation ◽  
Genotype By Environment Interaction ◽  
Kernel Weight ◽  
Yield Potential ◽  
Leaf Angle ◽  
Environment Interaction ◽  
Spike Number ◽  
Erect Leaves

F3 single plant traits were tested as possible selection criteria for increasing yield potential. F3 plants were grown spaced in a glasshouse, while yield was measured in southern New South Wales under irrigation and optimum management. Thc population studied comprised 220 F1-derived lines taken at random from a multiple convergent cross amongst 16 parents representing elite CTMMYT germplasm of the mid 1970s but containing diversity for major dwarfing genes, maturity, leaf angle and other traits. More than 50 traits were determined, comprising numerical components of yield, size and morphology, partitioning ratios, development rates and physiological activities. All F3 traits showed significant genotypic variation which was usually greater for progeny lines than for parents although only occasionally significantly so. Broad sense heritability was generally moderate to high.F3 lines were advanced by single seed descent for replicated F7 and F8 yield experiments, two in each of 1982 and 1983. In each experiment 60-68 progeny lines chosen at random were tested; 44 lines were common to all experiments. Plot size was 8 rows X 5 m, and edge rows and plot ends were discarded. Yield levels were high (mean yield 5.9 t h a 1 at 10Yo moisture) and largely free of interference from lodging and disease. The progeny main effect on grain yield was highly significant, but no progeny line significantly outyielded the best parent. Best correlations with progeny grain yield were given by F3 plant height (r= -0.31 to -0.50 across experiments), F3 kernel weight (r= -0.03 to -0.44), F3 harvest index (r = 0.18 to 0.5 l), F3 leaf angle (r = -0.13 to -0.40, erect leaves favouring high yicld) and F3 spike number (r=0.08 to 0.40). Retrospective selection in F3 using these traits singly at a selection intensity of 25% gave increases in population mean yield (0 to + 12%) and in the proportion of high yielding lines (doubled in some cases), but only selection in F3 for reduced stature is considered worthwhile for advancing yield potential. It is suggested that the ineffectiveness of F3 selection is largely due to genotype by environment interaction, along with the complex multigenic nature of grain yicld.

scholarly journals EFFECT OF SPRAYING WITH DIFFERENT CONCENTRATION OF LICORICE EXTRACT AND PLANT DENSITIES IN GROWTH AND YIELD OF SORGHUM BICOLOR L.

2019 ◽  
Vol 50 (6) ◽  
Author(s):  
Al-Mohmadi & Al-Ani
Keyword(s):  
Grain Yield ◽  
Plant Density ◽  
Foliar Application ◽  
Growth And Yield ◽  
Control Treatment ◽  
Spring Season ◽  
Area Index ◽  
Fall Season ◽  
High Plant Density ◽  
Plant Densities

A field experiment was condueted at the experimental Farm, College of Agriculture University of AL-Anbar in replace location (Abu-Gheaib) in spring season of 2017. While in Fall season it was applied at AL-saqluwiya-Anbar Province 10 km west north of Falluga city to study the effect of four levels of licorice extractor (Glycyrrhiza glabra L.) (0,2,4 and 6) g.L-1 water and three (53,333, 66,666 and 88,888 plant) plant.ha-1. On growth and grain yield of Sorghum cv. Rabih. The experiment was applied using R.C.B.D. arranged in split plots with three replications. levels of plant densities were used as main-plot, while licorice extractor were used as sub-plot. Foliar application of licorice extractor was applied during vegetative growth. The results showed that, high plant density (88888) plant.h-1 significantly increase plant height and leaf area index, while most of traits were not significantly influenced by plant density including grain yield. Results revealed that foliar application of licorice extractor with 2,4,6 g.L-1 of water significantly influenced grain yield in spring season compane with control treatment and it is amounted to (9.62, 9.55 and 9.78) t.h-1 respectively. There were significant interaction between Licorice extractor and plant density in spring and fall season in grain yield. The higher grain yield of 10.31 and 10.33 t.h-1 were obtained when sorghum plants were sowing at hight density and sprayed with Licorice extractor at level          4 g.L-1 respectively

Sign in / Sign up

Export Citation Format

Share Document