scholarly journals Different types of mechanical vibration application on EMG response and strength performance

2022 ◽  
Vol 28 ◽  
Author(s):  
Aler R. Almeida ◽  
Marcos D. M. Drummond ◽  
Leszek A. Szmuchrowski ◽  
Gustavo F. Pedrosa ◽  
Bruno P. Couto
Keyword(s):  
Mechanical Vibration ◽  
Strength Performance ◽  
Different Types

scholarly journals Effects of different types of verbal encouragement on ankle force and muscle activity

2018 ◽  
Vol 32 (4) ◽  
pp. 699-708
Author(s):  
Ulisses T. Taddei ◽  
Francis Trombini-Souza ◽  
Jane S. S. P. Ferreira ◽  
Alessandra B. Matias ◽  
Rafael S. Inoue ◽  
...  
Keyword(s):  
Muscle Activity ◽  
Intraclass Correlation ◽  
Correlation Coefficients ◽  
Psychological Traits ◽  
Strength Performance ◽  
Intraclass Correlation Coefficients ◽  
Main Effect ◽  
Different Types ◽  
Verbal Encouragement ◽  
Flexion Force

The aim of this study is to investigate (i) the effect of live and recorded verbal encouragement on muscle activity and ankle force; (ii) the effect of communication/extroversion on the variables; (iii) the reliability intra and inter examiners of the variables. Twenty healthy-youngers were assessed by surface electromyography of tibialis anterior and ankle flexion force by an ergometer twice, with one week apart. No difference was found between ankle force (p = 0.373) and root mean square values (RMS) (p = 0.207) for any of the conditions assessed on day 1 nor between examiners 1 and 2 for both live and recorded conditions in RMS (p = 0.207) and force (p = 0.373). Between the 1st and 7th days, there were no differences for any of the conditions on RMS (main effect “Day” p = 0.261, “condition” p = 0.568, interaction p = 0.936) or force (main effect“Day” p = 0.889, “condition” p = 0.781, interaction p = 0.961). Intraclass correlation coefficients (ICCs) for the ankle force were, for without verbal encouragement (ICC2, k = 0.880), live verbal encouragement of examiner 1 (ICC2, k = 0.870), and recorded verbal encouragement of examiner 1 (ICC2, k = 0.920). RMS without verbal encouragement condition (ICC2, k = 0.860), live verbal encouragement of examiner 1 (ICC2, k = 0.930) and recorded verbal encouragement of examiner 1 (ICC2, k = 0.920). Reproducibility between the two examiner’s live encouragements for ankle force (ICC3, k = 0.981) and RMS (ICC3, k = 0.920). There was no effect of the presence or type of the augmented feedback in RMS and ankle force. We conclude that verbal encouragement does not influence ankle torque or muscle activity and there is good to excellent intra and inter rater reliability for subjects’ performance regardless of verbal encouragement modality. In addition, we observed that psychological traits Communication and Emotional stability does not affect the subjects’ strength performance at the ankle.

scholarly journals Ultimate Compressive Strength of Stiffened Panel: An Empirical Formulation for Flat-bar Type

2020 ◽  
Author(s):  
Do Kyun Kim ◽  
Su Young Yu ◽  
Hui Ling Lim ◽  
Nak-Kyun Cho
Keyword(s):  
Compressive Strength ◽  
Ultimate Strength ◽  
Limit State ◽  
Ultimate Compressive Strength ◽  
Stiffened Panel ◽  
Ultimate Limit State ◽  
Longitudinal Compression ◽  
Strength Performance ◽  
Different Types ◽  
Ultimate Limit

This research aims to study the ultimate limit state (ULS) behaviour of stiffened panel under longitudinal compression by non-linear finite element method (NLFEM). There are different types of stiffeners being used in shipbuilding i.e. T-bar, flat-bar and angle-bar. However, this research focuses on the ultimate compressive strength behaviour of flat-bar stiffened panel. A total of 420 of reliable scenarios of flat-bar stiffened panel are selected for numerical simulation by ANSYS NLFEM. The ultimate strength behaviours obtained were used as data for the development of closed form shape empirical formulation. Recently, Kim et al. [1] proposed for advanced empirical formulation for T-bar stiffened panel and the applicability of the proposed formulation to flat-bar stiffened panel will be confirmed by this study. The accuracy of the empirical formulation obtained for flat-bar stiffened panel has been validated by FE simulation results of statistical analysis (R2 = 0.9435). The outcome obtained will be useful for ship structural designers in predicting the ultimate strength performance of flat-bar type stiffened panel under longitudinal compression.

The extinction time of a general birth and death process with catastrophes

1986 ◽  
Vol 23 (04) ◽  
pp. 851-858 ◽  
Author(s):  
P. J. Brockwell
Keyword(s):  
Laplace Transform ◽  
Size Distribution ◽  
Sufficient Conditions ◽  
Necessary And Sufficient Conditions ◽  
Death Process ◽  
Extinction Time ◽  
Birth And Death Process ◽  
Different Types ◽  
The Laplace Transform ◽  
Necessary And Sufficient

The Laplace transform of the extinction time is determined for a general birth and death process with arbitrary catastrophe rate and catastrophe size distribution. It is assumed only that the birth rates satisfyλ0= 0,λj> 0 for eachj> 0, and. Necessary and sufficient conditions for certain extinction of the population are derived. The results are applied to the linear birth and death process (λj=jλ, µj=jμ) with catastrophes of several different types.

Differentiating between different forms of moral obligations

2020 ◽  
Vol 43 ◽  
Author(s):  
Rajen A. Anderson ◽  
Benjamin C. Ruisch ◽  
David A. Pizarro
Keyword(s):  
Moral Character ◽  
Moral Obligations ◽  
Different Types

Abstract We argue that Tomasello's account overlooks important psychological distinctions between how humans judge different types of moral obligations, such as prescriptive obligations (i.e., what one should do) and proscriptive obligations (i.e., what one should not do). Specifically, evaluating these different types of obligations rests on different psychological inputs and has distinct downstream consequences for judgments of moral character.

Ultrastructural Investigations of the Contractile Filaments of Amoebae

1974 ◽  
Vol 32 ◽  
pp. 188-189
Author(s):  
P.L. Moore
Keyword(s):  
Cytoplasmic Streaming ◽  
Three Dimensional ◽  
Freeze Fracture ◽  
Amoeboid Movement ◽  
Different Types ◽  
Chemical Conditions ◽  
Complete Interpretation

Previous freeze fracture results on the intact giant, amoeba Chaos carolinensis indicated the presence of a fibrillar arrangement of filaments within the cytoplasm. A complete interpretation of the three dimensional ultrastructure of these structures, and their possible role in amoeboid movement was not possible, since comparable results could not be obtained with conventional fixation of intact amoebae. Progress in interpreting the freeze fracture images of amoebae required a more thorough understanding of the different types of filaments present in amoebae, and of the ways in which they could be organized while remaining functional.The recent development of a calcium sensitive, demembranated, amoeboid model of Chaos carolinensis has made it possible to achieve a better understanding of such functional arrangements of amoeboid filaments. In these models the motility of demembranated cytoplasm can be controlled in vitro, and the chemical conditions necessary for contractility, and cytoplasmic streaming can be investigated. It is clear from these studies that “fibrils” exist in amoeboid models, and that they are capable of contracting along their length under conditions similar to those which cause contraction in vertebrate muscles.

Study of the Molecular Architecture of Keratin Filaments by Electron Microscopy

1982 ◽  
Vol 40 ◽  
pp. 118-119
Author(s):  
U. Aebi ◽  
P. Rew ◽  
T.-T. Sun
Keyword(s):  
Electron Microscopy ◽  
Structural Organization ◽  
Cell Types ◽  
Structural Features ◽  
Molecular Architecture ◽  
The Past ◽  
Keratin Filaments ◽  
Different Types ◽  
10 Nm Filaments ◽  
Different Cell Types

Various types of intermediate-sized (10-nm) filaments have been found and described in many different cell types during the past few years. Despite the differences in the chemical composition among the different types of filaments, they all yield common structural features: they are usually up to several microns long and have a diameter of 7 to 10 nm; there is evidence that they are made of several 2 to 3.5 nm wide protofilaments which are helically wound around each other; the secondary structure of the polypeptides constituting the filaments is rich in ∞-helix. However a detailed description of their structural organization is lacking to date.

A New Defect in Polyethylene Single Crystals

1973 ◽  
Vol 31 ◽  
pp. 70-71
Author(s):  
E. L. Thomas ◽  
S. L. Sass
Keyword(s):  
Single Crystals ◽  
Screw Dislocation ◽  
Small Distance ◽  
Dipole Model ◽  
Dislocation Dipole ◽  
Chain Folding ◽  
Black And White ◽  
Polymer Crystal ◽  
Different Types

In polyethylene single crystals pairs of black and white lines spaced 700-3,000Å apart, parallel to the [100] and [010] directions, have been identified as microsector boundaries. A microsector is formed when the plane of chain folding changes over a small distance within a polymer crystal. In order for the different types of folds to accommodate at the boundary between the 2 fold domains, a staggering along the chain direction and a rotation of the chains in the plane of the boundary occurs. The black-white contrast from a microsector boundary can be explained in terms of these chain rotations. We demonstrate that microsectors can terminate within the crystal and interpret the observed terminal strain contrast in terms of a screw dislocation dipole model.

Methionine-Specific Staining of Collagen

1982 ◽  
Vol 40 ◽  
pp. 294-295
Author(s):  
E.M. Kuhn ◽  
K.D. Marenus ◽  
M. Beer
Keyword(s):  
Amino Acids ◽  
Collagen Fibers ◽  
Type Iii Collagen ◽  
Type I ◽  
Electron Microscopic ◽  
Good Correspondence ◽  
Specific Staining ◽  
Type Iii ◽  
Different Types ◽  
Sulfur Containing

Fibers composed of different types of collagen cannot be differentiated by conventional electron microscopic stains. We are developing staining procedures aimed at identifying collagen fibers of different types.Pt(Gly-L-Met)Cl binds specifically to sulfur-containing amino acids. Different collagens have methionine (met) residues at somewhat different positions. A good correspondence has been reported between known met positions and Pt(GLM) bands in rat Type I SLS (collagen aggregates in which molecules lie adjacent to each other in exact register). We have confirmed this relationship in Type III collagen SLS (Fig. 1).

Identification of Asbestos Fibres in a Water Sample by X-Ray Microanalysis

1975 ◽  
Vol 33 ◽  
pp. 274-275
Author(s):  
K. A. Brookes ◽  
D. Finbow ◽  
Madeleine Samuel
Keyword(s):  
Water Sample ◽  
Background Radiation ◽  
X Ray ◽  
Left Hand ◽  
Transmission Imaging ◽  
Different Types ◽  
Normal Specimen ◽  
Liquid Nitrogen Cooling ◽  
Normal Transmission ◽  
Additional Port

Investigation of the particulate matter contained in the water sample, revealed the presence of a number of different types and certain of these were selected for analysis.An A.E.I. Corinth electron microscope was modified to accept a Kevex Si (Li) detector. To allow for existing instruments to be readily modified, this was kept to a minimum. An additional port is machined in the specimen region to accept the detector, with the liquid nitrogen cooling dewar conveniently housed in the left hand cupboard adjacent to the microscope column. Since background radiation leads to loss in the sensitivity of the instrument, great care has been taken to reduce this effect by screening and manufacturing components that are near the specimen from material of low atomic number. To change from normal transmission imaging to X-ray analysis, the special 4-position specimen rod is inserted through the normal specimen airlock.

Backscattered Electron Imaging of GaAs/AlGaAs Super Lattice Structures with an Ultra-High- Resolution SEM

1988 ◽  
Vol 46 ◽  
pp. 204-205
Author(s):  
Kazumichi Ogura ◽  
Michael M. Kersker
Keyword(s):  
High Resolution ◽  
Layer Structure ◽  
High Sensitivity ◽  
Beam Current ◽  
Electron Beam Current ◽  
Lattice Structures ◽  
Super Lattice ◽  
Different Types ◽  
Backscattered Electron ◽  
Electron Imaging

Backscattered electron (BE) images of GaAs/AlGaAs super lattice structures were observed with an ultra high resolution (UHR) SEM JSM-890 with an ultra high sensitivity BE detector. Three different types of super lattice structures of GaAs/AlGaAs were examined. Each GaAs/AlGaAs wafer was cleaved by a razor after it was heated for approximately 1 minute and its crosssectional plane was observed.First, a multi-layer structure of GaAs (100nm)/AlGaAs (lOOnm) where A1 content was successively changed from 0.4 to 0.03 was observed. Figures 1 (a) and (b) are BE images taken at an accelerating voltage of 15kV with an electron beam current of 20pA. Figure 1 (c) is a sketch of this multi-layer structure corresponding to the BE images. The various layers are clearly observed. The differences in A1 content between A1 0.35 Ga 0.65 As, A1 0.4 Ga 0.6 As, and A1 0.31 Ga 0.69 As were clearly observed in the contrast of the BE image.

Sign in / Sign up

Export Citation Format

Share Document