scholarly journals Adhesion and biofilm formation by Staphylococcus aureus from food processing plants as affected by growth medium, surface type and incubation temperature

2012 ◽  
Vol 48 (4) ◽  
pp. 737-745
Author(s):  
Heloísa Maria Ângelo Jerônimo ◽  
Rita de Cássia Ramos do Egypto Queiroga ◽  
Ana Caroliny Vieira da Costa ◽  
Isabella de Medeiros Barbosa ◽  
Maria Lúcia da Conceição ◽  
...  

This study assessed the effect of different growth media [BHI broth, BHI broth plus glucose (10 g/100 mL) and BHI broth plus NaCl (5 g/100 mL)] and incubation temperatures (28 or 37 ºC) on the adherence, detachment and biofilm formation on polypropylene and stainless steel surfaces (2 x 2 cm coupons) for a prolonged period (24-72 h) by some strains of Staphylococcus aureus (S3, S28 and S54) from food processing plants. The efficacy of the sanitizers sodium hypochlorite (250 mg/mL) and peracetic acid (30 mg/mL) in reducing the number of viable bacterial cells in a preformed biofilm was also evaluated. S. aureus strains adhered in highest numbers in BHI broth, regardless of the type of surface or incubation temperature. Cell detachment from surfaces revealed high persistence over the incubation period. The number of cells needed for biofilm formation was noted in all experimental systems after 3 days. Peracetic acid and sodium hypochlorite were not efficient in completely removing the cells of S. aureus adhered onto polypropylene and stainless steel surfaces. From these results, the assayed strains revealed high capacities to adhere and form biofilms on polypropylene and stainless steel surfaces under the different growth conditions, and the cells in biofilm matrixes were resistant to total removal when exposed to the sanitizers sodium hypochlorite and peracetic acid.

2019 ◽  
Vol 49 (7) ◽  
Author(s):  
Bruna Webber ◽  
Amauri Picollo de Oliveira ◽  
Emanuele Serro Pottker ◽  
Luciane Daroit ◽  
Rafael Levandowski ◽  
...  

ABSTRACT: We evaluated the influence of temperature on the ability of Salmonella Enteritidis (SE) to form biofilms on stainless steel, polyethylene, and polyurethane surfaces under different hygiene procedures. These materials were placed on SE culture and incubated at 42±1 ºC, 36±1 ºC, 25±1 ºC, 9±1 ºC, and 3±1 ºC for 4, 8, 12, and 24 h. Hot water at 45 ºC and 85 ºC, 0.5% peracetic acid solution, and 1% quaternary ammonia were used for hygienization. Biofilm formation occurred at all temperatures evaluated, highlighting at 3 ºC which has not been reported as an ideal temperature for the adhesion of SE to these materials. The SE adhered more often to polyethylene surfaces than to polyurethane and stainless steel surfaces (P<0.05). Peracetic acid and water at 85 ºC had similar hygienization efficiency (P<0.05) followed by quaternary ammonia whereas water at 45 ºC was not effective. SE adhered to these materials under low temperatures which to date have been deemed safe for food preservation.


2018 ◽  
Vol 46 (1) ◽  
pp. 6 ◽  
Author(s):  
Anelise Bravo Friedriczewski ◽  
Eliezer Ávila Gandra ◽  
Rita De Cássia dos Santos da Conceição ◽  
Natacha Deboni Cereser ◽  
Lauren Machado Moreira ◽  
...  

Background: The buffalo milk mozzarella cheese is a new product in the market, with high consumer acceptance and excellent prospects for trade. The cheese is rich in nutrients, which favors the proliferation of microorganisms that can cause food-borne diseases in the consumer. Staphylococcus aureus can cause gastro-enteritis in humans by the production of enterotoxins in food. One problem that may hinder the elimination of undesirable microorganisms in the food industry is the formation of biofilms. The objective of this study was to determine the effect of biofilm formation by Staphylococcus aureus isolated from buffalo mozzarella cheese on sensitivity to sanitizers.Materials, Methods & Results: Fifty samples of buffalo mozzarella cheese were analyzed to investigate the presence of S. aureus. The isolates were obtained through microbiological analysis and identified by PCR. The similarity of the strains was compared through rep-PCR. The distinct strains were tested for biofilm formation in microtiter plates. Soy Tripticase Broth (TSB) was placed in each well of the microtiter plate and overnight cultures of each strain was added. Wells without bacterial culture were used as controls. A villous cap was then placed on the plate and incubated for 48 h at 37°C. During incubation, the biofilms formed on the surface of the villi of the caps. For quantification of biofilm formation, material that remained attached to the cap was stained with crystal violet, the stained biofilm was extracted and the OD570 of each well was measured. Each strain was classified as non-biofilm forming, weak forming, moderately formed or formative strong. Strong forming and non-biofilm forming strains were tested on high density polyethylene, stainless steel and glass surfaces. Plates of 4 cm² of the different materials were placed in TSB where the culture of each isolate was inoculated separately. At each 48 h incubation the plates were washed to remove unbound cells and re-inserted into TSB without the inoculum. After five replicates of the procedure, sterile swabs were passed over the entire surface of each plate for counting in Baird-Parker agar. They were also tested for sensitivity to sodium hypochlorite and iodine after biofilm formation. The biofilm plates were immersed in flasks containing sanitizers, where they remained for 10 min. At the established contact time, the plates were immersed in neutralizing solution for 30 s. After washing with PBS, a sterile swab was passed on the surface of each plate and counts on Baird-Parker agar were performed. The bands profiles obtained on rep-PCR were identical when compared to isolates from the same sample, indicating that each sample was contaminated with only one S. aureus strain. From the twenty S. aureus strain identified, two isolates were classified as strong biofilm formers, seven as moderate formers, ten weak formers and one as non-biofilm builder. The two strong forming strains produced biofilm on the three surfaces tested. The application of sodium hypochlorite and iodine sanitizers promoted a reduction of approximately 2 log bacterial populations on all surfaces of both the biofilm and non-forming strains.Discussion: Most strains of S. aureus isolated from buffalo milk mozzarella cheese have the ability to form biofilm on the surfaces of equipment and utensils that have stainless steel, glass or high density polyethylene components. Although biofilm forming strains are no longer resistant to sanitizers sodium hypochlorite and iodine than non-forming sanitizers, they reach higher concentrations in the biofilm, resulting in larger bacterial populations remaining after application of the sanitizers. These results support the recommendation that the good hygienic practices adopted by industries processing buffalo milk mozzarella cheese should include specific measures to control the Staphylococcus aureus contamination.


2010 ◽  
Vol 30 (1) ◽  
pp. 231-236 ◽  
Author(s):  
Iara Dias Silva ◽  
Roberta Torres Careli ◽  
Júnia Capua Lima ◽  
Nelio José Andrade

The effectiveness of cleaning and sanitizing procedures in controlling Staphylococcus aureus, Salmonella Enteritidis, and Pseudomonasfluorescens adhered to granite and stainless steel was evaluated. There was no significant difference (p > 0.05) in the adherence of pure cultures of these microorganisms to stainless steel. The numbers of P. fluorescens and S. Enteritidis adhered to granite were greater (p < 0.05) than the numbers of S. aureus. Additionally, the adherence of P. fluorescens was similar to the adherence of S. Enteritidis on granite surface. In a mixed culture with P. fluorescens, S aureus adhered less (p < 0.05) to stainless steel surfaces (1.31 log CFU.cm-2) than when in a pure culture (6.10 log CFU.cm-2). These results suggest that P. fluorescens inhibited the adherence of S. aureus. However, this inhibition was not observed in the adherence process for granite. There was a significant difference (p < 0.05) between the number of adhered cells before and after pre-washing for S. aureus on stainless steel and granite surfaces, and after washing with detergent for all microorganisms and surfaces. The efficiency of the cleaning plus sanitizing procedures was not significantly different (p > 0.05) between the surfaces. However, a significant difference was observed (p < 0.05) between the sanitizer solutions. Sodium hypochlorite and peracetic acid were more bactericidal (p < 0.05) than a quaternary ammonium compound. With regard to microorganisms, S. aureus was the least resistant to the sanitizers. These results show the importance of good cleaning and sanitization procedures to prevent bacterial adherence and biofilm formation.


2018 ◽  
Vol 48 (12) ◽  
Author(s):  
Janaina Viana da Rosa ◽  
Natália Volpato da Conceição ◽  
Rita de Cássia dos Santos da Conceição ◽  
Cláudio Dias Timm

ABSTRACT: Vibrio parahaemolyticus is an important pathogen for both fish industry and consumers. It forms biofilm which makes it difficult to eliminate this microorganism using sanitizers. This study aimed to assess biofilm formation on different surfaces and effect of biofilm on resistance to sanitizers. Eight isolates of biofilm-forming V. parahaemolyticus were tested for the ability to form biofilms on a number of surfaces including high density polyethylene, stainless steel, glass, exoskeleton of Farfantepenaeus paulensis (Pink Shrimp), and operculum of Micropogonias furnieri (Whitemouth Croaker). Efficiency of sanitizer sodium hypochlorite against the bacteria was evaluated in the biofilms formed on the surface of the materials used; out the eight strains analyzed four formed biofilm on different surfaces. The present study shows that there are variations between surfaces in terms of biofilm formation, with more than one bacterial strain being able to form biofilm on the surface of the operculum of M. furnieri and on high density polyethylene as well. One isolate formed biofilm on glass, and one isolate formed biofilm on stainless steel. Sanitizers reduced biofilm formation on all surfaces. Based on our findings, we concluded that V. parahaemolyticus isolates have different ability to form biofilm on different surfaces. No isolates formed biofilm on shrimp shells. Results of this study also showed that sodium hypochlorite eat a concentration of 20 parts per million (20ppm) of Cl2, albeit not able to eliminate bacteria reported in biofilms, is still capable of reducing bacterial populations.


2014 ◽  
Vol 35 (11) ◽  
pp. 1414-1416 ◽  
Author(s):  
Abhishek Deshpande ◽  
Thriveen S. C. Mana ◽  
Jennifer L. Cadnum ◽  
Annette C. Jencson ◽  
Brett Sitzlar ◽  
...  

OxyCide Daily Disinfectant Cleaner, a novel peracetic acid/hydrogen peroxide–based sporicidal disinfectant, was as effective as sodium hypochlorite for in vitro killing of Clostridium difficile spores, methicillin-resistant Staphylococcus aureus, and vancomcyin-resistant enterococci. OxyCide was minimally affected by organic load and was effective in reducing pathogen contamination in isolation roomsInfect Control Hosp Epidemiol 2014;35(11):1414–1416


2006 ◽  
Vol 69 (10) ◽  
pp. 2411-2416 ◽  
Author(s):  
L. LAGACÉ ◽  
M. JACQUES ◽  
A. A. MAFU ◽  
D. ROY

The susceptibility of planktonic and biofilm cells of Pseudomonas marginalis toward four commonly used biocides at different temperatures (15 and 30°C) and biofilm growth times (24 and 48 h) was assessed. Using the MBEC biofilm device, biofilm production in maple sap was shown to be highly reproducible for each set of conditions tested. Biofilm formation was influenced by growth temperature and time. A temperature of 15°C and incubation time of 24 h yielded fewer CFU per peg and showed fewer adhered cells and typical biofilm structures, based on scanning electron microscopy observations as compared with other conditions. Minimal biofilm eradication concentration values for P. marginalis were significantly greater (P &lt; 0.001) than were MBCs for planktonic cells and for every biocide tested, with the exception of minimal biofilm eradication concentration values for peracetic acid at 15°C and 24 h. Sodium hypochlorite and peracetic acid sanitizers were able to eliminate P. marginalis biofilms at lower concentrations as compared with hydrogen peroxide– and quaternary ammonium– based sanitizers (P &lt; 0.001). According to the results obtained, sodium hypochlorite and peracetic acid sanitizers would be more appropriate for maple sap collection system sanitation.


2020 ◽  
Vol 63 (5) ◽  
pp. 1401-1407
Author(s):  
Bog Eum Lee ◽  
Youngsang You ◽  
Won Choi ◽  
Eun-mi Hong ◽  
Marisa M. Wall ◽  
...  

HighlightsNanoporous superhydrophobic surfaces were fabricated using electrochemical etching and Teflon coating.Adhesion of Listeria monocytogenes to the nanoengineered stainless steel surfaces was reduced.Self-cleanable food-contact surfaces prevent bacterial attachment and subsequent biofilm formation.Abstract. Bacterial attachment on solid surfaces and subsequent biofilm formation is a significant problem in the food industry. Superhydrophobic surfaces have potential to prevent bacterial adhesion by minimizing the contact area between bacterial cells and the surface. In this study, stainless steel-based superhydrophobic surfaces were fabricated by manipulating nanostructures with electrochemical etching and polytetrafluoroethylene (PTFE) film. The formation of nanostructures on stainless steel surfaces was characterized by field emission scanning electron microscopy (FESEM). The stainless steel surfaces etched at 10 V for 5 min and at 10 V for 10 min with PTFE deposition resulted in average water contact angles of 154° ±4° with pore diameters of 50 nm. In addition, adhesion of Listeria monocytogenes was decreased by up to 99% compared to the bare substrate. These findings demonstrate the potential for the development of antibacterial surfaces by combining nanoporous patterns with PTFE films. Keywords: Electrochemical etching, PTFE, Nanoengineered surface, L. monocytogenes, Superhydrophobic.


Sign in / Sign up

Export Citation Format

Share Document