scholarly journals Salmonella Enteritidis forms biofilm under low temperatures on different food industry surfaces

2019 ◽  
Vol 49 (7) ◽  
Author(s):  
Bruna Webber ◽  
Amauri Picollo de Oliveira ◽  
Emanuele Serro Pottker ◽  
Luciane Daroit ◽  
Rafael Levandowski ◽  
...  

ABSTRACT: We evaluated the influence of temperature on the ability of Salmonella Enteritidis (SE) to form biofilms on stainless steel, polyethylene, and polyurethane surfaces under different hygiene procedures. These materials were placed on SE culture and incubated at 42±1 ºC, 36±1 ºC, 25±1 ºC, 9±1 ºC, and 3±1 ºC for 4, 8, 12, and 24 h. Hot water at 45 ºC and 85 ºC, 0.5% peracetic acid solution, and 1% quaternary ammonia were used for hygienization. Biofilm formation occurred at all temperatures evaluated, highlighting at 3 ºC which has not been reported as an ideal temperature for the adhesion of SE to these materials. The SE adhered more often to polyethylene surfaces than to polyurethane and stainless steel surfaces (P<0.05). Peracetic acid and water at 85 ºC had similar hygienization efficiency (P<0.05) followed by quaternary ammonia whereas water at 45 ºC was not effective. SE adhered to these materials under low temperatures which to date have been deemed safe for food preservation.

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Victoria O. Adetunji ◽  
Aderemi O. Kehinde ◽  
Olayemi K. Bolatito ◽  
Jinru Chen

Mycobacterium boviscauses classic bovine tuberculosis, a zoonosis which is still a concern in Africa. Biofilm forming ability of twoMycobacterium bovisstrains was assessed on coupons of cement, ceramic, or stainless steel in three different microbiological media at 37°C with agitation for 2, 3, or 4 weeks to determine the medium that promotes biofilm. Biofilm mass accumulated on coupons was treated with 2 sanitizers (sanitizer A (5.5 mg L−1active iodine) and sanitizer B (170.6 g1alkyl dimethylbenzyl ammonium chloride, 78 g−1didecyldimethyl ammonium chloride, 107.25 g L−1glutaraldehyde, 146.25 g L−1isopropanol, and 20 g L−1pine oil) at 28 and 45°C and in hot water at 85°C for 5 min. Residual biofilms on treated coupons were quantified using crystal violet binding assay. The two strains had a similar ability to form biofilms on the three surfaces. More biofilms were developed in media containing 5% liver extract. Biofilm mass increased as incubation time increased till the 3rd week. More biofilms were formed on cement than on ceramic and stainless steel surfaces. Treatment with hot water at 85°C reduced biofilm mass, however, sanitizing treatments at 45°C removed more biofilms than at 28°C. However, neither treatment completely eliminated the biofilms. The choice of processing surface and temperatures used for sanitizing treatments had an impact on biofilm formation and its removal from solid surfaces.


Toxins ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 420 ◽  
Author(s):  
Danielle Bruno de Carvalho ◽  
Eduardo Gonçalves Paterson Fox ◽  
Diogo Gama dos Santos ◽  
Joab Sampaio de Sousa ◽  
Denise Maria Guimarães Freire ◽  
...  

Biofilm formation on exposed surfaces is a serious issue for the food industry and medical health facilities. There are many proposed strategies to delay, reduce, or even eliminate biofilm formation on surfaces. The present study focuses on the applicability of fire ant venom alkaloids (aka ‘solenopsins’, from Solenopsis invicta) tested on polystyrene and stainless steel surfaces relative to the adhesion and biofilm-formation by the bacterium Pseudomonas fluorescens. Conditioning with solenopsins demonstrates significant reduction of bacterial adhesion. Inhibition rates were 62.7% on polystyrene and 59.0% on stainless steel surfaces. In addition, solenopsins drastically reduced cell populations already growing on conditioned surfaces. Contrary to assumptions by previous authors, solenopsins tested negative for amphipathic properties, thus understanding the mechanisms behind the observed effects still relies on further investigation.


2005 ◽  
Vol 68 (10) ◽  
pp. 2149-2154 ◽  
Author(s):  
E. GIAOURIS ◽  
N. CHORIANOPOULOS ◽  
G.-J. E. NYCHAS

An assay was developed in an effort to elucidate the effect of important environmental parameters (temperature, pH, and water activity [aw]) on Salmonella Enteritidis biofilm formation on stainless steel surfaces. To achieve this, a modified micro-biological technique used for biofilm studying (the bead vortexing method) and a rapid method based on conductivity measurements were used. The ability of the microorganism to generate biofilm on the stainless surfaces was studied at three temperatures (5, 20, and 37°C), four pH values (4.5, 5.5, 6.5, and 7.4), and four aw values (0.5, 1.5, 5.5, and 10.5% NaCl). Results obtained by the bead vortexing method show that maximum numbers of adherent bacteria per square centimeter (106 CFU/cm2) were attained in 6 days at 20°C. Biofilm formation after 7 days of incubation at 20°C was found to be independent of the pH value. In addition, the high concentration of sodium chloride (10.5% NaCl, aw = 0.94) clearly inhibited the adherence of cells to the coupons. Conductance measurements were used as a supplementary tool to measure indirectly the attachment and biofilm formation of bacterial cells on stainless steel surfaces via their metabolic activity (i.e., changes in the conductance of the growth medium due to microbial growth or metabolism). Results obtained by conductance measurements corresponded well to those of the bead vortexing method. Furthermore, we were able to detect cells that remained attached on the metal surfaces even after vortexing via their metabolic activity. The results, except for demonstrating environmental-dependent Salmonella Enteritidis biofilm formation, indicated that traditional vortexing with beads did not remove completely biofilm cells from stainless steel; hence, conductance measurements seem to provide a more sensitive test capable to detect down to one single viable organism.


2018 ◽  
Vol 47 (1) ◽  
Author(s):  
Laura Beatriz Rodrigues ◽  
Bruna Webber ◽  
Rafael Levandowski ◽  
Sarah Souza Gehlen ◽  
Luciana Ruschel dos Santos ◽  
...  

Background: The genus Salmonella, associated with poultry products, is considered the leading cause of foodborne outbreaks in humans in many countries. In Brazil, Salmonella Enteritidis (SE) is the serovar remains as one most frequently isolated from humans, and it is also a major serovar found in animals, food, animal feed, and environmental samples, despite all the efforts to control this pathogen. Also, the bacterium is able to form biofilms on different surfaces, protecting cells from both cleaning and sanitizing procedures in the food industries. This study aimed to verify the ability of Salmonella Enteritidis isolates to form biofilm on polystyrene at different incubation temperatures.Materials, Methods & Results: A total of 171 SE samples were isolated from foodborne outbreaks (foods and stool cultures) and poultry products between 2003 and 2010. The biofilm-forming ability of samples was measured at four different temperatures (3°C, 9ºC, 25ºC, and 36ºC), for 24 h, simulating temperatures usually found in poultry slaughterhouses. Later, 200 μL of each bacterial suspension was inoculated, in triplicate, onto 96-well, flat-bottomed sterile polystyrene microtiter plates, washed, after that, the biofilm was fixed with methanol. The plates were dried at ambient temperature, stained with 2% Hucker’s crystal violet. Afterwards, absorbance was read using an ELISA plate reader and the optical density (OD) of each isolate was obtained by the arithmetic mean of the absorbance of three wells and this value was compared with the mean absorbance of negative controls (ODnc). The following classification was used for the determination of biofilm formation: no biofilm production, weak biofilm production, moderate biofilm production and strong biofilm production. Results demonstrated all isolates from stool cultures and foods involved in foodborne outbreaks, at least one of the four temperatures tested, were able to form biofilm, even at 3°C, undescribed as possible for the growth of SE. SE strains from poultry products also formed biofilm at least at one of the temperatures.Discussion: the prevention of biofilms formation is very important, once they can be difficult to remove from utensils and food equipment surfaces, becoming a chronic source of microbial contamination of foods, possible dissemination of diseases, and increase of resistance to cleaning and sanitization procedures. A high ability for biofilm formation on plastic surfaces was observed. We may consider that Salmonella has the capacity to bind to surfaces, with relevant impacts on public health. Although biofilm formation could be affected by temperature, most of the SE isolates analyzed in our study were strong biofilm producers at all temperatures, including at 3°C, a temperature used for food preservation and until then not acknowledged as worrisome regarding the development of Salmonella spp. There is a common sense that maintenance of food at low temperatures, particularly below 5°C, is safer to consumers as low temperatures reduce microbial multiplication. However, our results show that the growth of SE in its sessile form is possible under refrigeration. These findings lead to the assumption that the ability of SE to form biofilms, especially at low temperatures, is related to its endurance in inhospitable environments, eventually infecting humans, and that may be one of the factors associated with the high prevalence of this serovar in outbreaks of foodborne diseases. To our knowledge, this is the first publication about biofilm formation by Salmonella Enteritidis at 3ºC.


2012 ◽  
Vol 48 (4) ◽  
pp. 737-745
Author(s):  
Heloísa Maria Ângelo Jerônimo ◽  
Rita de Cássia Ramos do Egypto Queiroga ◽  
Ana Caroliny Vieira da Costa ◽  
Isabella de Medeiros Barbosa ◽  
Maria Lúcia da Conceição ◽  
...  

This study assessed the effect of different growth media [BHI broth, BHI broth plus glucose (10 g/100 mL) and BHI broth plus NaCl (5 g/100 mL)] and incubation temperatures (28 or 37 ºC) on the adherence, detachment and biofilm formation on polypropylene and stainless steel surfaces (2 x 2 cm coupons) for a prolonged period (24-72 h) by some strains of Staphylococcus aureus (S3, S28 and S54) from food processing plants. The efficacy of the sanitizers sodium hypochlorite (250 mg/mL) and peracetic acid (30 mg/mL) in reducing the number of viable bacterial cells in a preformed biofilm was also evaluated. S. aureus strains adhered in highest numbers in BHI broth, regardless of the type of surface or incubation temperature. Cell detachment from surfaces revealed high persistence over the incubation period. The number of cells needed for biofilm formation was noted in all experimental systems after 3 days. Peracetic acid and sodium hypochlorite were not efficient in completely removing the cells of S. aureus adhered onto polypropylene and stainless steel surfaces. From these results, the assayed strains revealed high capacities to adhere and form biofilms on polypropylene and stainless steel surfaces under the different growth conditions, and the cells in biofilm matrixes were resistant to total removal when exposed to the sanitizers sodium hypochlorite and peracetic acid.


2010 ◽  
Vol 30 (1) ◽  
pp. 231-236 ◽  
Author(s):  
Iara Dias Silva ◽  
Roberta Torres Careli ◽  
Júnia Capua Lima ◽  
Nelio José Andrade

The effectiveness of cleaning and sanitizing procedures in controlling Staphylococcus aureus, Salmonella Enteritidis, and Pseudomonasfluorescens adhered to granite and stainless steel was evaluated. There was no significant difference (p > 0.05) in the adherence of pure cultures of these microorganisms to stainless steel. The numbers of P. fluorescens and S. Enteritidis adhered to granite were greater (p < 0.05) than the numbers of S. aureus. Additionally, the adherence of P. fluorescens was similar to the adherence of S. Enteritidis on granite surface. In a mixed culture with P. fluorescens, S aureus adhered less (p < 0.05) to stainless steel surfaces (1.31 log CFU.cm-2) than when in a pure culture (6.10 log CFU.cm-2). These results suggest that P. fluorescens inhibited the adherence of S. aureus. However, this inhibition was not observed in the adherence process for granite. There was a significant difference (p < 0.05) between the number of adhered cells before and after pre-washing for S. aureus on stainless steel and granite surfaces, and after washing with detergent for all microorganisms and surfaces. The efficiency of the cleaning plus sanitizing procedures was not significantly different (p > 0.05) between the surfaces. However, a significant difference was observed (p < 0.05) between the sanitizer solutions. Sodium hypochlorite and peracetic acid were more bactericidal (p < 0.05) than a quaternary ammonium compound. With regard to microorganisms, S. aureus was the least resistant to the sanitizers. These results show the importance of good cleaning and sanitization procedures to prevent bacterial adherence and biofilm formation.


2020 ◽  
Vol 10 (4) ◽  
pp. 1364
Author(s):  
Krzysztof Skowron ◽  
Karolina Jadwiga Skowron ◽  
Justyna Bauza-Kaszewska ◽  
Ewa Wałecka-Zacharska ◽  
Joanna Kwiecińska-Piróg ◽  
...  

The decontamination of food contact surfaces is a major problem for the food industry. The radiant catalytic ionization (RCI) method, based on the ionization process, may be an alternative for conventional decontamination procedures. The advantage of this technique is the possibility of its application to household refrigerating appliances and industrial cold rooms. This study aimed to assess the effect of RCI on the reduction of Campylobacter jejuni, Listeria monocytogenes, and Salmonella Enteritidis from the biofilms formed on a glass surface under refrigeration conditions. Bacterial biofilms were exposed to RCI for 24 h and after 12 (variant I) and 72 h (variant II) of the glass surface contamination. In the last variant (III), the contaminated meat was placed on the glass surface in the refrigerator and subjected to RCI treatment for 72 h. The significantly highest values of absolute reduction efficiency coefficient E were found for the bacterial attachment stage of biofilm formation (variant I). The research proves the efficiency of the RCI method in the reduction of bacteria number from a glass surface.


2020 ◽  
Vol 63 (5) ◽  
pp. 1401-1407
Author(s):  
Bog Eum Lee ◽  
Youngsang You ◽  
Won Choi ◽  
Eun-mi Hong ◽  
Marisa M. Wall ◽  
...  

HighlightsNanoporous superhydrophobic surfaces were fabricated using electrochemical etching and Teflon coating.Adhesion of Listeria monocytogenes to the nanoengineered stainless steel surfaces was reduced.Self-cleanable food-contact surfaces prevent bacterial attachment and subsequent biofilm formation.Abstract. Bacterial attachment on solid surfaces and subsequent biofilm formation is a significant problem in the food industry. Superhydrophobic surfaces have potential to prevent bacterial adhesion by minimizing the contact area between bacterial cells and the surface. In this study, stainless steel-based superhydrophobic surfaces were fabricated by manipulating nanostructures with electrochemical etching and polytetrafluoroethylene (PTFE) film. The formation of nanostructures on stainless steel surfaces was characterized by field emission scanning electron microscopy (FESEM). The stainless steel surfaces etched at 10 V for 5 min and at 10 V for 10 min with PTFE deposition resulted in average water contact angles of 154° ±4° with pore diameters of 50 nm. In addition, adhesion of Listeria monocytogenes was decreased by up to 99% compared to the bare substrate. These findings demonstrate the potential for the development of antibacterial surfaces by combining nanoporous patterns with PTFE films. Keywords: Electrochemical etching, PTFE, Nanoengineered surface, L. monocytogenes, Superhydrophobic.


2003 ◽  
Vol 69 (8) ◽  
pp. 4814-4822 ◽  
Author(s):  
Ann-Cathrin Olofsson ◽  
Malte Hermansson ◽  
Hans Elwing

ABSTRACT N-Acetyl-l-cysteine (NAC) is used in medical treatment of patients with chronic bronchitis. The positive effects of NAC treatment have primarily been attributed to the mucus-dissolving properties of NAC, as well as its ability to decrease biofilm formation, which reduces bacterial infections. Our results suggest that NAC also may be an interesting candidate for use as an agent to reduce and prevent biofilm formation on stainless steel surfaces in environments typical of paper mill plants. Using 10 different bacterial strains isolated from a paper mill, we found that the mode of action of NAC is chemical, as well as biological, in the case of bacterial adhesion to stainless steel surfaces. The initial adhesion of bacteria is dependent on the wettability of the substratum. NAC was shown to bind to stainless steel, increasing the wettability of the surface. Moreover, NAC decreased bacterial adhesion and even detached bacteria that were adhering to stainless steel surfaces. Growth of various bacteria, as monocultures or in a multispecies community, was inhibited at different concentrations of NAC. We also found that there was no detectable degradation of extracellular polysaccharides (EPS) by NAC, indicating that NAC reduced the production of EPS, in most bacteria tested, even at concentrations at which growth was not affected. Altogether, the presence of NAC changes the texture of the biofilm formed and makes NAC an interesting candidate for use as a general inhibitor of formation of bacterial biofilms on stainless steel surfaces.


2007 ◽  
Vol 38 (2) ◽  
pp. 318-323 ◽  
Author(s):  
Kelly Oliveira ◽  
Tereza Oliveira ◽  
Pilar Teixeira ◽  
Joana Azeredo ◽  
Rosário Oliveira

Sign in / Sign up

Export Citation Format

Share Document