Out-of-plane behaviour of masonry wall structures strengthened with steel-bar truss system

2021 ◽  
pp. 1-12
Author(s):  
Seung-Hyeon Hwang ◽  
Sanghee Kim ◽  
Keun-Hyeok Yang
Keyword(s):  
Masonry Wall ◽  
Wall Structures ◽  
Steel Bar ◽  
Out Of Plane

Mechanical Properties of Various Models of Interlocking Concrete Blocks under In-Plane and Out-of-Plane Loads

2021 ◽  
Vol 881 ◽  
pp. 149-156
Author(s):  
Mochamad Teguh ◽  
Novi Rahmayanti ◽  
Zakki Rizal
Keyword(s):  
Mechanical Properties ◽  
Building Material ◽  
Experimental Tests ◽  
Concrete Block ◽  
Masonry Wall ◽  
Masonry Walls ◽  
Plane Shear ◽  
Out Of Plane ◽  
Concrete Blocks ◽  
Local Materials

Building material innovations in various interlocking concrete block masonry from local materials to withstand lateral earthquake forces is an exciting issue in masonry wall research. The block hook has an advantage in the interlocking system's invention to withstand loads in the in-plane and out-of-plane orientations commonly required by the masonry walls against earthquake forces. Reviews of the investigation of in-plane and out-of-plane masonry walls have rarely been found in previous studies. In this paper, the results of a series of experimental tests with different interlocking models in resisting the simultaneous in-plane shear and out-of-plane bending actions on concrete blocks are presented. This paper presents a research investigation of various interlocking concrete blocks' mechanical properties with different hook thicknesses. Discussion of the trends mentioned above and their implications towards interlocking concrete block mechanical properties is provided.

Out-of-plane bending of masonry wall embedding with welded wire mesh (WWM) in different orientations

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Donkupar Francis Marbaniang ◽  
Teiborlang Warjri ◽  
Comingstarful Marthong
Keyword(s):  
Masonry Wall ◽  
Wire Mesh ◽  
Out Of Plane ◽  
Plane Bending

scholarly journals Monitoring of Thermal and Moisture Processes in Various Types of External Historical Walls

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 505 ◽  
Author(s):  
Dariusz Bajno ◽  
Lukasz Bednarz ◽  
Zygmunt Matkowski ◽  
Krzysztof Raszczuk
Keyword(s):  
Masonry Wall ◽  
Design Guidelines ◽  
Masonry Walls ◽  
Historical Buildings ◽  
Wall Structures ◽  
Mutual Comparison ◽  
Energy Audits ◽  
Biological Corrosion ◽  
Comfort Parameters ◽  
The Impact

In order to create and make available the following: Design guidelines, recommendations for energy audits, data for analysis and simulation of the condition of masonry walls susceptible to biological corrosion, deterioration of comfort parameters in rooms, or deterioration of thermal resistance, the article analyzes various types of masonry wall structures occurring in and commonly used in historical buildings over the last 200 years. The summary is a list of results of particular types of masonry walls and their mutual comparison. On this basis, a procedure path has been proposed which is useful for monitoring heat loss, monitoring the moisture content of building partitions, and improving the hygrothermal comfort of rooms. The durability of such constructions has also been estimated and the impact on the condition of the buildings that have been preserved and are still in use today was assessed.

scholarly journals Wire Ropes and CFRP Strips to Provide Masonry Walls with Out-Of-Plane Strengthening

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2712
Author(s):  
Elena Ferretti
Keyword(s):  
Steel Wire ◽  
Three Dimensional ◽  
Maximum Load ◽  
Masonry Wall ◽  
Masonry Walls ◽  
Wire Ropes ◽  
Out Of Plane ◽  
Beam Mechanism ◽  
Combined Technique ◽  
The Ideal

The present paper deals with an improvement of the strengthening technique consisting in the combined use of straps—made of stainless steel ribbons—and CFRP (Carbon Fiber Reinforced Polymer) strips, to increase the out-of-plane ultimate load of masonry walls. The straps of both the previous and the new combined technique pass from one face to the opposite face of the masonry wall through some holes made along the thickness, giving rise to a three-dimensional net of loop-shaped straps, closed on themselves. The new technique replaces the stainless steel ribbons with steel wire ropes, which form closed loops around the masonry units and the CFRP strips as in the previous technique. A turnbuckle for each steel wire rope allows the closure of the loops and provides the desired pre-tension to the straps. The mechanical coupling—given by the frictional forces—between the straps and the CFRP strips on the two faces of the masonry wall gives rise to an I-beam behavior that forces the CFRP strips to resist the load as if they were the two flanges of the same I-beam. Even the previous combined technique exploits the ideal I-beam mechanism, but the greater stiffness of the steel wire ropes compared to the stiffness of the steel ribbons makes the constraint between the facing CFRP strips stiffer. This gives the reinforced structural element a greater stiffness and delamination load. In particular, the experimental results show that the maximum load achievable with the second combined technique is much greater than the maximum load provided by the CFRP strips. Even the ultimate displacement turns out to be increased, allowing us to state that the second combined technique improves both strength and ductility. Since the CFRP strips of the combined technique run along the vertical direction of the wall, the ideal I-beam mechanism is particularly useful to counteract the hammering action provided by the floors on the perimeter walls, during an earthquake. Lastly, when the building suffers heavy structural damage due to a strong earthquake, the box-type behavior offered by the three-dimensional net of straps prevents the building from collapsing, acting as a device for safeguarding life.

Applied Element Method Simulation of Fiber Reinforced Polymer and Polypropylene Composite Retrofitted Masonry Walls

2014 ◽  
Vol 17 (11) ◽  
pp. 1567-1583 ◽  
Author(s):  
Saleem M. Umair ◽  
Muneyoshi Numada ◽  
Kimiro Meguro
Keyword(s):  
Numerical Model ◽  
Research Work ◽  
Masonry Wall ◽  
Fiber Reinforced Polymer ◽  
Bending Test ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Out Of Plane ◽  
Applied Element Method ◽  
Element Method

In current research work, an attempt is made to simulate the behavior of a newly proposed composite material using 3-D Applied Element Method (AEM). Fiber Reinforced Polymer (FRP) being a strong material provides a significant increase in shear strength. Polypropylene band (PP-band) not only holds the masonry wall system into a single unit but also provides a fairly high deformation capacity at a very low cost of retrofitting. A composite of FRP and PP-band is proposed and applied on the surface of masonry wall. Verification of the proposed numerical model is achieved by conducting experiments on twelve masonry wallets. Out of twelve, six masonry wallets were tested in out of plane bending test and six were tested under in-plane forces in the form of diagonal compression test. Same wallet retrofitting scheme was selected for in-plane and out of plane experiments and all of them were analyzed using proposed 3-D AEM numerical simulation tool. Proposed numerical model has served satisfactory and has shown a fairly good agreement with experimental results which encourages the use of 3D-AEM to numerically simulate the behavior of non-retrofitted and retrofitted masonry wallets.

scholarly journals Out-of-Plane Behavior of Masonry Wall Strengthened Using Expanded Wire Mesh

2018 ◽  
Vol 7 (3.12) ◽  
pp. 554
Author(s):  
S Kanchidurai ◽  
P A. Krishanan ◽  
K Baskar ◽  
K Saravana Raja Mohan
Keyword(s):  
Construction Industry ◽  
Masonry Wall ◽  
Strength Test ◽  
Wire Mesh ◽  
Propagation Path ◽  
Test Results ◽  
Wall Panel ◽  
Compressive Strength Test ◽  
Out Of Plane ◽  
Masonry Prism

Brick masonry is the principal part of the construction industry. This paper presents the result of the expanded wire mesh embedded into the masonry wall panel; expanded mesh (EM) is the inexpensive locally available material on the market. Through the experimental study, the primary affecting parameters recognized, and the methodology of the embedment details established, the preliminary survey was conducted as per the guidelines are given in the ASTM E518. Totally three numbers of control specimen and three numbers of EM embedded specimen are cast, and compressive strength test of masonry prism also evaluated to identify the crack propagation path. The test results turned out to be highly promising, out of plane damage was less in the EM embedded specimen also it was designated the cracks are reduced.

scholarly journals The Utilization of Recycled Masonry Aggregate and Recycled EPS for Concrete Blocks for Mortarless Masonry

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1923 ◽  
Author(s):  
Tereza Pavlu ◽  
Kristina Fortova ◽  
Jakub Divis ◽  
Petr Hajek
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Masonry Wall ◽  
Expanded Polystyrene ◽  
Mechanical And Thermal Properties ◽  
Concrete Mixtures ◽  
Wall Structures ◽  
Different Types ◽  
Concrete Blocks ◽  
Recycled Masonry

The main aim of this paper is to carry out the environmentally based enhancement of a concrete mixture containing recycled materials whilst considering natural resource consumption as well as mechanical and thermal property levels. The developed concrete is intended to be used in mortarless masonry wall structures. Ten concrete mixtures with different types and replacement rates of recycled masonry aggregate and recycled expanded polystyrene were prepared, and their mechanical and thermal properties were experimentally investigated. It was found that the use of recycled masonry aggregate led to better thermal properties while maintaining sufficient mechanical properties. On the contrary, the addition of recycled expanded polystyrene did not significantly affect the thermal properties of concrete, but the mechanical properties considerably declined. For this reason, the recycled masonry aggregate is suitable to use as an aggregate for concrete masonry blocks for wall structures.

Sign in / Sign up

Export Citation Format

Share Document