scholarly journals Ear tag mechanical properties under extreme climate conditions

2012 ◽  
Vol 58 (No. 4) ◽  
pp. 142-147
Author(s):  
M. Müller ◽  
D. Lukešová
Keyword(s):  
Mechanical Properties ◽  
Experimental Research ◽  
Potential Application ◽  
Laboratory Tests ◽  
Laboratory Experiments ◽  
Practical Experience ◽  
Climate Conditions ◽  
Extreme Climate ◽  
The Common ◽  
Constructional Design

The common ear tag production and application do not take into regard the demographic environment and climate of a target destination which are specified. However, this fact becomes a core of the problem. The necessity to characterize the ear tag bond comes out from the practical experience when applying incorrect exchange spike in the application punch by mistake. The aim of the experimental research was to carry out the evaluation of the ear tag mechanical qualities under increased and decreased temperatures on the base of the laboratory experiments together with the suitable and incorrect application of the exchange spike in the application punch. Different environment temperatures in the tested interval –20°C till 60°C should simulate one of the possible attribute of the potential application in the different climate. The constructional design of the ear tag bond was proposed on the basis of the laboratory tests.  

8. Experimental Research

2017 ◽  
Author(s):  
Sandra Halperin ◽  
Oliver Heath
Keyword(s):  
Experimental Design ◽  
Research Design ◽  
Experimental Research ◽  
External Validity ◽  
Laboratory Experiments ◽  
Field Experiments ◽  
Ethical Issues ◽  
Natural Experiments ◽  
The Common ◽  
Internal And External Validity

This chapter explores the principles of experimental research design as well as the issues and problems associated with different aspects of the approach. In particular, it considers the issue of internal and external validity, the common obstacles associated with experimental research, and what can be done to try and avoid or minimize them. The chapter first describes the five steps involved in the classic version of the experimental design before discussing three types of experimental design: laboratory experiments, field experiments, and natural experiments. It also examines the ethical issues that arise from experimental research and concludes by highlighting some of the advantages of experimental research.

scholarly journals Development and experimental research of a low-thermal asphalt material for grouting leakage blocking

2020 ◽  
Vol 39 (1) ◽  
pp. 433-446
Author(s):  
Ping Fu ◽  
Liwei Huang ◽  
Zhanqing Xing
Keyword(s):  
Mechanical Properties ◽  
Experimental Research ◽  
Heating Temperature ◽  
Physical And Mechanical Properties ◽  
Construction Technology ◽  
Geological Hazards ◽  
The World ◽  
High Heating ◽  
The Common ◽  
Impact Experiments

AbstractTunnel water burst is among the common severe geological hazards in deep buried tunnel projects in China and throughout the world. Asphalt grouting is an effective method to block seepage channels in macroporous strata under the condition of flowing water, but it has defects such as a high heating temperature, complex high-temperature construction technology, and poor controllability during the grouting process. A type of “water-in-oil” low-thermal asphalt was developed in this study. It can cool and solidify and not be diluted when encountering water, and its construction temperature can be below 80°C. Experimental research on the physical and mechanical properties of the low-thermal asphalt leakage-blocking material was completed, including proportion experiments, fluidity, sensitivity to temperature, one- and two-dimensional indoor diffusion experiments, and impact experiments, which presented its physical and mechanical properties and can provide guidance for the application of the material in site projects.

8. Experimental Research

2020 ◽  
pp. 211-230
Author(s):  
Sandra Halperin ◽  
Oliver Heath
Keyword(s):  
Experimental Design ◽  
Research Design ◽  
Experimental Research ◽  
External Validity ◽  
Laboratory Experiments ◽  
Field Experiments ◽  
Ethical Issues ◽  
Natural Experiments ◽  
The Common ◽  
Internal And External Validity

This chapter explores the principles of experimental research design as well as the issues and problems associated with different aspects of the approach. In particular, it considers the issue of internal and external validity, the common obstacles associated with experimental research, and what can be done to try and avoid or minimize them. The chapter first describes the five steps involved in the classic version of the experimental design before discussing three types of experimental design: laboratory experiments, field experiments, and natural experiments. It also examines the ethical issues that arise from experimental research and concludes by highlighting some of the advantages of experimental research.

scholarly journals Numerical simulation study on the crack propagation of conglomerate

2021 ◽  
Vol 8 (7) ◽  
pp. 202178
Author(s):  
Senlin Luo ◽  
Hongkui Ge ◽  
Jianbo Wang ◽  
Wei Zhou ◽  
Yinghao Shen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Laboratory Experiments ◽  
Oil And Gas ◽  
Elasticity Modulus ◽  
Additional Stress ◽  
Uniaxial Compression Test ◽  
Failure Characteristics ◽  
Deformation And Failure ◽  
Gravel Content ◽  
The Common

The conglomerate reservoir is rich in oil and gas reserves; however, the gravel's mechanical properties and laws are difficult to gain through laboratory experiments, which furthermore constrain the hydraulic fracturing design. To analyse the failure law of conglomerate, we simulated the uniaxial compression test based on discrete element software PFC2D and analysed the effect of different cementation strength, gravel content and gravel geometry on the rock deformation and failure characteristics. Results show that (i) as the cementation strength decreases, the compressive strength and elasticity modulus both reduce clearly, while the crack shapes get more complex and the critical value is 0.3; (ii) as the gravel content increases, the conglomerate strength first decreases then increases under the influences of cracks bypassing gravels; cementation strength and gravel content of the conglomerate both contribute to the increase in local additional stress, which leads to a series of changes in crack shapes and mechanical properties of the conglomerate. Based on the above research, the conglomerate strength and crack shapes after failure are relatively complex due to the common influence of cementation strength and gravel content. The gravel edge crack caused by stress concentration is the micro-mechanism that affects the conglomerate mechanical properties.

LABORATORY TESTS OF THE PHYSICAL-MECHANICAL PROPERTIES OF MATERIALS FOR REMEDIAL JOBS

2020 ◽  
pp. 58-63
Author(s):  
M.A. Druzhinin ◽  
◽  
G.V. Okromelidze ◽  
O.V. Garshina ◽  
I.A. Kudimov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Laboratory Tests ◽  
Mechanical Properties Of Materials ◽  
Properties Of Materials

PRÁTICA LABORATORIAL DE PESQUISA SEDIMENTOLÓGICA

2019 ◽  
Vol 21 (2) ◽  
pp. 218-226
Author(s):  
Alyne Karollayne Melquiades Souza Silva ◽  
Joanderson Fernandes Simões ◽  
Júlio César Reis Silva ◽  
Amanda Cristina Dias Lima ◽  
Marcelo Santos Chaves ◽  
...  
Keyword(s):  
Undergraduate Students ◽  
Experimental Research ◽  
Laboratory Experiments ◽  
Rio Grande ◽  
Physical Geography ◽  
Laboratory Work ◽  
Theoretical Knowledge ◽  
Laboratory Experience

Esta pesquisa teve como finalidade relatar experiências em laboratório, especificamente o Laboratório de Geografia Física - Pesquisa (LabGeoFis-Pesquisa), localizado no Departamento de Geografia, no Centro de Ciências Humanas, Letras e Artes, da Universidade Federal do Rio Grande do Norte. Procuramos relatar, de forma concisa, as principais técnicas aplicadas ao trabalho laboratorial, enfatizado a temática da Geografia Física. Para tecer essas considerações, nos fundamentamos em autores como Venturi (2005) e Rudio (1990), os quais tratam sobre teorias e procedimentos relacionados às práticas de laboratório e a pesquisa descritiva e experimental, respectivamente. Para realizar esta pesquisa, levamos em consideração os trabalhos e as experiências desenvolvidas pelos alunos de bacharelado e licenciatura do primeiro período do curso de Geografia. Os resultados aqui obtidos, nos mostraram a importância dos conhecimentos teóricos aliados com a prática de laboratório.Palavras chaves: Laboratório; Experiência; Técnicas. ABSTRACT This research had the purpose of reporting laboratory experiments, specifically the Laboratory of Physical Geography - Research (LabGeoFis-Search), located in the Department of Geography, at the Humanities, Letters and Arts Center of the Federal University of Rio Grande do Norte. We try to report, in a concise way, the main techniques applied to laboratory work, emphasizing the theme of Physical Geography. In order to make these considerations, we base ourselves on authors such as Venturi (2005) and Rudio (1990), who deal with theories and procedures related to laboratory practices and descriptive and experimental research, respectively. To carry out this research, we take into account the work and experiences developed by the baccalaureate and undergraduate students of the first period of the Geography course. The results obtained here showed us the importance of theoretical knowledge allied with laboratory practice.Keywords: Laboratory; Experience; Technique. RESUMENEl propósito de esta investigación fue reportar experimentos de laboratorio, específicamente el Laboratorio de Investigación de Geografía Física (LabGeoFis-Pesquisa), ubicado en el Departamento de Geografía, en el Centro de Humanidades, Letras y Artes, Universidad Federal de Río Grande del Norte.

Polypyrrole/PU hybrid hydrogels: electrically conductive and fast self-healing for the potential application in body-monitor sensor

2021 ◽  
Author(s):  
Zhanyu Jia ◽  
Guangyao Li ◽  
Juan Wang ◽  
shouhua Su ◽  
Jie Wen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Potential Application ◽  
Self Healing ◽  
Electrically Conductive ◽  
Sensor Application ◽  
Hybrid Hydrogels ◽  
Health Monitor

Conductivity, self-healing and moderate mechanical properties are necessary for multifunctional hydrogels which have great potential in health-monitor sensor application. However, the combination of electrical conductivity, self-healing and good mechanical properties...

Development of Low Carbon High Strength H-Beam Steel

2010 ◽  
Vol 168-170 ◽  
pp. 969-972
Author(s):  
Jian Qing Qian ◽  
Ji Ping Chen ◽  
Bao Qiao Wu ◽  
Jie Ca Wu
Keyword(s):  
Mechanical Properties ◽  
Laboratory Experiments ◽  
Theoretical Study ◽  
High Strength ◽  
Rolling Process ◽  
Low Carbon ◽  
Study Product ◽  
H Beam ◽  
Nitrogen Alloy

The application of vanadium-nitrogen alloy to develop a certain low carbon high strength H-beam steel was determined through the combination of theoretical study, product requirements and existing practical conditions. The specific rolling process was further defined through laboratory experiments. The developed low carbon high strength H-beam steel was trial produced and its properties were also analyzed. The results showed that the newly developed low carbon high strength H-beam steel had excellent mechanical properties and good weldability.

Sign in / Sign up

Export Citation Format

Share Document