POTENCIAL DE ENERGIA SOLAR PARA A IRRIGAÇÃO NO MUNICÍPIO DE BARBALHA-CE

2017 ◽  
Vol 32 (1) ◽  
pp. 57
Author(s):  
Francisca Valdelice Pereira Silva ◽  
Hernandes Oliveira Feitosa ◽  
Claudio Faustino Pereira ◽  
João Alvino Sampaio Silva ◽  
Erialdo Oliveira Feitosa
Keyword(s):  
Solar Energy ◽  
Renewable Energy Sources ◽  
Economic Feasibility ◽  
Photovoltaic System ◽  
Net Income ◽  
Energy Potential ◽  
Financial Return ◽  
Pv Systems ◽  
Historical Series ◽  
Alternative Means

Atualmente há uma preocupação na utilização de energia solar como meios alternativos, tendo em vista a viabilidade para implantação dos sistemas fotovoltaicos. Sendo de extrema importância nos tempos atuais devido à necessidade de utilização de novas fontes de energia renováveis. O objetivo desse trabalho é analisar a viabilidade econômica do uso da energia solar na agricultura familiar irrigada no município de Barbalha. O trabalho foi desenvolvido a partir de dados coletados na Estação Climatológica, localizada em Barbalha, numa série histórica de 30 anos, esses dados foram inserido num programa computacional Retscreen para analisar a viabilidade de projetos, foi feita uma simulaçao do sistema fotovoltaico para geração de energia acionando um conjunto motobomba de 1,0 cv para transportar água a uma caixa com capacidade de 1000 l á 6 m de altura, em seguida será realizada a irrigação por gotejamento de forma gravitacional numa área de 1 há cultivado com milho. Os resultados foram que o sistema só terá um retorno financeiro em 18,5 anos, passando essa energia solar para os agricultores verificamos que somando todos os custos do agricultor será de R$ 7710,00 com uma receita bruta de R$ 11963,52 durante dez meses período em que se podem cultivar dois ciclos de milho irrigado, obtendo uma receita liquida de R$ 4253,52. Assim, o agricultor poderá pagar o investimento da energia fotovoltaica em menos tempo. O sistema mostra-se vantajoso nestes aspectos e abre uma interessante perspectiva de aproveitamento mais eficiente da energia solar na irrigação.Palavras-chave: energia solar; sistemas fotovoltaicos; viabilidade econômica. SOLAR ENERGY POTENTIAL FOR IRRIGATION IN THE MUNICIPALITY OF BARBALHA-CEAbstract: Currently there is concern in the use of solar energy as alternative means in order to implement the viability of PV systems. It is of paramount importance in the present times due to the necessity of use of new renewable energy sources. The aim of this study is to analyze the economic feasibility of using solar energy in irrigated family farming in the municipality of Barbalha. The work was developed from data collected in the Climatological Station, located in Barbalha, a historical series of 30 years, this data is inserted into a computer program Retscreen Software to analyze the feasibility of projects, it was made a Simulation of the photovoltaic system for generating energy driving a pump of 1.0 hp to carry water to a box with 1000 l capacity with 6 m high, then will be held drip irrigation of gravity form an area of 1 is cultivated with milho.Os results were the system will only have a financial return approximately 18.5 years, passing this energy for farmers we found that adding all the farmer's cost will be R $ 7,710.00 with gross revenues of R $ 11,963.52 for ten month period in that can grow two cycles of irrigated corn, obtaining a net income of R $ 4,253.52. Thus, the farmer can afford the investment of photovoltaics in less time. The system seems advantageous in these aspects and opens an interesting perspective more efficient use of solar energy for irrigation. Keywords: solar energy; photovoltaics; economic viabilit.

scholarly journals A Methodological Analysis Approach to Assess Solar Energy Potential at the Neighborhood Scale

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3554 ◽  
Author(s):  
Gabriele Lobaccaro ◽  
Malgorzata Maria Lisowska ◽  
Erika Saretta ◽  
Pierluigi Bonomo ◽  
Francesco Frontini
Keyword(s):  
Solar Energy ◽  
Renewable Energy Sources ◽  
Urban Morphology ◽  
Solar Irradiation ◽  
Energy Potential ◽  
Public Authorities ◽  
Local Conditions ◽  
Pv Systems ◽  
Energy Needs ◽  
Neighborhood Scale

Rapid and uncontrolled urbanization is continuously increasing buildings’ energy consumption and greenhouse gas emissions into the atmosphere. In this scenario, solar energy integrated into the built environment can play an important role in optimizing the use of renewable energy sources on urban surfaces. Preliminary solar analyses to map the solar accessibility and solar potential of building surfaces (roofs and façades) should become a common practice among urban planners, architects, and public authorities. This paper presents an approach to support urban actors to assess solar energy potential at the neighborhood scale and to address the use of solar energy by considering overshadowing effects and solar inter-building reflections in accordance with urban morphology and building characteristics. The approach starts with urban analysis and solar irradiation analysis to elaborate solar mapping of façades and roofs. Data processing allows assessment of the solar potential of the whole case study neighborhood of Sluppen in Trondheim (Norway) by localizing the most radiated parts of buildings’ surfaces. Reduction factors defined by a new method are used to estimate the final solar potential considering shadowing caused by the presence of buildings’ architectural elements (e.g., glazed surfaces, balconies, external staircases, projections) and self-shading. Finally, rough estimation of solar energy generation is assessed by providing preliminary recommendations for solar photovoltaic (PV) systems suited to local conditions. Results show that depending on urban morphology and buildings’ shapes, PV systems can cover more than 40% of the total buildings’ energy needs in Trondheim.

scholarly journals Optimal Configuration and Sizing of Seaport Microgrids including Renewable Energy and Cold Ironing—The Port of Aalborg Case Study

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 431
Author(s):  
Nur Najihah Abu Bakar ◽  
Josep M. Guerrero ◽  
Juan C. Vasquez ◽  
Najmeh Bazmohammadi ◽  
Muzaidi Othman ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Maximum Load ◽  
Optimal Operation ◽  
Economic Feasibility ◽  
Photovoltaic System ◽  
Design Stage ◽  
Component Size

Microgrids are among the promising green transition technologies that will provide enormous benefits to the seaports to manage major concerns over energy crises, environmental challenges, and economic issues. However, creating a good design for the seaport microgrid is a challenging task, considering different objectives, constraints, and uncertainties involved. To ensure the optimal operation of the system, determining the right microgrid configuration and component size at minimum cost is a vital decision at the design stage. This paper aims to design a hybrid system for a seaport microgrid with optimally sized components. The selected case study is the Port of Aalborg, Denmark. The proposed grid-connected structure consists of renewable energy sources (photovoltaic system and wind turbines), an energy storage system, and cold ironing facilities. The seaport architecture is then optimized by utilizing HOMER to meet the maximum load demand by considering important parameters such as solar global horizontal irradiance, temperature, and wind resources. Finally, the best configuration is analyzed in terms of economic feasibility, energy reliability, and environmental impacts.

scholarly journals TECHNO-ECONOMIC ANALYSIS OF AN OFF-GRID HYBRID ENERGY SYSTEM WITH HOMER PRO

2021 ◽  
Vol 5 (3) ◽  
pp. 56-61
Author(s):  
Ahmet Erhan AKAN
Keyword(s):  
Renewable Energy ◽  
Solar Energy ◽  
Economic Analysis ◽  
Energy Conversion ◽  
Renewable Energy Sources ◽  
Lithium Ion ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Energy Potential ◽  
Economic Point

The decrease in fossil-based energy sources and increasing environmental problems increase the tendency to renewable energy sources day by day. The potential of renewable energy sources differs according to the region where the energy will be produced. For this reason, it is crucial to conduct a good feasibility study that deals with the selected systems from a technical and economic point of view before making an investment decision on energy conversion systems based on renewable energy sources. In this study, the most suitable equipment and capacities were investigated by examining the techno-economic analysis of a hybrid system created with wind-solar renewable energies for a detached house, which is considered off-grid, in a rural area of Tekirdağ province (40o58.7ı N, 27o30.7ı E). Investigations were carried out using the HOMER Pro (Hybrid Optimization Model for Electric Renewable) program. The wind and solar energy potential of Tekirdağ province were obtained from the NASA renewable energy resources database added to the HOMER Pro program. The daily electricity requirement of the sample house was chosen as 11.27 kWh, and the current peak electrical load was chosen as 2.39 kW. A wind turbine is connected to the AC busbars, solar collectors and battery group connected to the DC busbars, and a converter that converts energy between AC and DC busbars in the energy conversion system. In order to determine the optimum capacities of the system elements, 27486 different simulations were performed by HOMER Pro. The selection of the most suitable system among these was determined according to the lowest net present cost (NPC) value. In addition, the energy production capacities that will occur in the case of different wind speeds were also investigated. Accordingly, the system to be installed with a solar panel with a capacity of 6.25 kW, PV-MPPT with a capacity of 1 kW, 2 wind turbines with a capacity of 1 kW, 8 Lithium-ion batteries with a capacity of 6V-167 Ah, and a converter with a capacity of 2.5 kW has been determined will generate electrical energy of 5433 kWh per year. In addition, it has been determined that 61.8% of this produced energy will be obtained from solar energy and 38.2% from wind energy, and the simple payback period of the investment will be 14 years. It is thought that this study will provide valuable information to researchers and investors.

scholarly journals Solar Assisted Power Generation System in Hot Desert Climate: A Cost-Benefit Perspective

2021 ◽  
Author(s):  
Ramzi Alahmadi ◽  
◽  
Kamel Almutairi ◽  
Keyword(s):  
Solar Energy ◽  
Fossil Fuels ◽  
Cost Benefit ◽  
Energy Systems ◽  
Clean Energy ◽  
Economic Feasibility ◽  
Economic Viability ◽  
Solar Pv ◽  
Pv System ◽  
Pv Systems

With the increasing global concerns about greenhouse gas emissions caused by the extensive use of fossil fuels, many countries are investing in the deployment of clean energy sources. The utilization of abundant solar energy is one of the fastest growing deployed renewable sources due its technological maturity and economic competitivity. In addition to report from the National Renewable Energy Laboratory (NREL), many studies have suggested that the maturity of solar energy systems will continue to develop, which will increase their economic viability. The focus of analysis in this paper is countries with hot desert climates since they are the best candidates for solar energy systems. The capital of Saudi Arabia, Riyadh is used as the case study due to the country’s ambitious goals in this field. The main purpose of this study is to comprehensively analyze the stochastic behavior and probabilistic distribution of solar irradiance in order to accurately estimate the expected power output of solar systems. A solar Photovoltaic (PV) module is used for the analysis due to its practicality and widespread use in utility-scale projects. In addition to the use of a break-even analysis to estimate the economic viability of solar PV systems in hot desert climates, this paper estimates the indifference point at which the economic feasibility of solar PV systems is justified, compared with the fossil-based systems. The numerical results show that the break-even point of installing one KW generation capacity of a solar PV system is estimated to pay off after producing 16,827 KWh, compared to 15,422 KWh for the case of fossil-based systems. However, the increased cost of initial investment in solar PV systems deployment starts to be economically justified after producing 41,437 KWh.

scholarly journals A Novel Current Sensor less MPPT based Approach for PV Applications Using PSO Technique

2021 ◽  
Vol 2070 (1) ◽  
pp. 012123
Author(s):  
Vinay Kumar ◽  
T Naveen Kumar ◽  
K T Prajwal
Keyword(s):  
Solar Energy ◽  
Renewable Energy Sources ◽  
Maximum Power ◽  
Current Sensor ◽  
Pv System ◽  
Pv Systems ◽  
Power Resources ◽  
Point Tracking ◽  
Power Point ◽  
The One

Abstract As an increased demand in power resources and to reduce global warming, Renewable Energy Sources (RES) are preferred over the conventional sources. Among various available RES, solar energy is the effective and efficient one. The solar energy is also clean and free energy. The use of Maximum Power Point Tracking (MPPT) is the one of the techniques to get maximized output power from the Photo Voltaic (PV) system. The proposed method uses a voltage sensor by eliminating the need of current sensor based on selected technique using Partial Swarm Optimization (PSO) technique interfaced with DC-DC boost converter. PSO technique is one of the methods which has high conflux speed, to precisely track the maximum power. The result of the planned methodology is studied with the assistance of an acceptable simulation applied in MATLAB/Simulink setting for experiment to valid of microcontroller which is employed. The result obtained from the simulations studies showed that current sensor less methodology using PSO technique can extract the maximize power from PV systems.

scholarly journals CURRENT STATE OF THE RENEWABLE SOURCES OF ENERGY USE IN SERBIA

2015 ◽  
Vol 6 (2) ◽  
Author(s):  
Dragana Milosavljević ◽  
Tomislav Pavlovic ◽  
Dragoljub Mirjanić ◽  
Danica Piršl
Keyword(s):  
Renewable Energy ◽  
Solar Energy ◽  
Wind Energy ◽  
Geothermal Energy ◽  
Energy Use ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Energy Potential ◽  
Current State ◽  
Extensive Body

This paper reviews the current state of the renewable energy use in Serbia. Further on, the paper describes energy potential and gives examples of the use of solar energy, wind energy, hydropower, geothermal energy, biomass and biogas in Serbia. Extensive body of information is given about support systems and measures of incentives for the investment in the construction and sale of electricity from plants using renewable energy sources. In conclusion, achieved results of the use of renewable energy sources in Serbia and the incentives for their use are presented.

scholarly journals CALCULATING SOLAR ENERGY POTENTIAL OF BUILDINGS AND VISUALIZATION WITHIN UNITY 3D GAME ENGINE

2017 ◽  
Vol XLII-4/W5 ◽  
pp. 39-44 ◽  
Author(s):  
G. Buyuksalih ◽  
S. Bayburt ◽  
A. P. Baskaraca ◽  
H. Karim ◽  
A. Abdul Rahman
Keyword(s):  
Solar Energy ◽  
Urban Areas ◽  
Environmental Conservation ◽  
Solar Panel ◽  
Photovoltaic System ◽  
Accurate Information ◽  
Game Engine ◽  
Energy Potential ◽  
3D Game ◽  
Unity 3D

Solar energy modelling is increasingly popular, important, and economic significant in solving energy crisis for big cities. It is a clean and renewable resource of energy that can be utilized to accommodate individual or group of buildings electrical power as well as for indoor heating. Implementing photovoltaic system (PV) in urban areas is one of the best options to solve power crisis over expansion of urban and the growth of population. However, as the spaces for solar panel installation in cities are getting limited nowadays, the available strategic options are only at the rooftop and façade of the building. Thus, accurate information and selecting building with the highest potential solar energy amount collected is essential in energy planning, environmental conservation, and sustainable development of the city. Estimating the solar energy/radiation from rooftop and facade are indeed having a limitation - the shadows from other neighbouring buildings. The implementation of this solar estimation project for Istanbul uses CityGML LoD2-LoD3. The model and analyses were carried out using Unity 3D Game engine with development of several customized tools and functionalities. The results show the estimation of potential solar energy received for the whole area per day, week, month and year thus decision for installing the solar panel could be made. We strongly believe the Unity game engine platform could be utilized for near future 3D mapping visualization purposes.

scholarly journals The Effect of Plants on the Energy Output of Green Roof Photovoltaic Systems in Tropical Climates

2021 ◽  
Vol 13 (8) ◽  
pp. 4505
Author(s):  
Chila Kaewpraek ◽  
Liaqat Ali ◽  
Md. Arfeen Rahman ◽  
Mohammad Shakeri ◽  
M. S. Chowdhury ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Solar Energy ◽  
Production Efficiency ◽  
Renewable Energy Sources ◽  
Green Roof ◽  
Electricity Production ◽  
Energy Output ◽  
Pv System ◽  
Pv Systems ◽  
The Future

The rapid rise in the number of fossil fuel uses over the last few decades has increased carbon dioxide (CO2) emissions. The purpose of implementing renewable energy solutions, such as solar, hydro, wind, biomass, and other renewable energy sources, is to mitigate global climate change worldwide. Solar energy has received more attention over the last few decades as an alternative source of energy, and it can play an essential role in the future of the energy industry. This is especially true of energy solutions that reduce land use, such as off-grid and on-grid solar rooftop technologies. This study aims to evaluate the energy conversion efficiency of photovoltaic (PV) systems in tropical environments. It also explores the effect of growing plants beneath PV panels. Two identical grid-connected PV systems—each containing five solar panels—were installed. The overall power production of each PV system was about 1.4 kWp. All the collected data were processed and analysed in the same way and by the same method. The PV systems were installed in two different environments—one with the possibility of growing the plants beneath the PV panels (PViGR module) and one with no possibility of growing the plants beneath the PV panels (PViSR module). The experiments were conducted in the Bo Yang District of Songkhla, Thailand over a 12-month period. Our findings indicate that green roof photovoltaic (GRPV) systems can produce around 2100 kWh of electricity in comparison to the 2000 kWh produced by other solar energy systems. Thereby, growing plants beneath PV panels increases electricity production efficiency by around 2%. This difference comes from the growing of plants underneath GRPV systems. Plants do not only help to trap humidity underneath GRPV systems but also help to cool the PV panels by absorbing the temperature beneath GRPV systems. Thus, in the production of electrical energy; the system was clearly showing significant differences in the mentioned results of both PV solar systems, which are evident for great energy efficiency performances in the future.

scholarly journals Preliminary Evaluation of a Rooftop Grid-Connected Photovoltaic System Installation under the Climatic Conditions of Texas (USA)

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 586
Author(s):  
Fadhil Y. Al-Aboosi ◽  
Abdullah F. Al-Aboosi
Keyword(s):  
Power Plants ◽  
Negative Impact ◽  
Photovoltaic System ◽  
Performance Ratio ◽  
Energy Output ◽  
Preliminary Evaluation ◽  
Solar Pv ◽  
Energy Potential ◽  
Pv System ◽  
Pv Systems

Solar photovoltaic (PV) systems have demonstrated growing competitiveness as a viable alternative to fossil fuel-based power plants to mitigate the negative impact of fossil energy sources on the environment. Notwithstanding, solar PV technology has not made yet a meaningful contribution in most countries globally. This study aims to encourage the adoption of solar PV systems on rooftop buildings in countries which have a good solar energy potential, and even if they are oil or gas producers, based on the obtained results of a proposed PV system. The performance of a rooftop grid-tied 3360 kWp PV system was analyzed by considering technical, economic, and environmental criteria, solar irradiance intensity, two modes of single-axis tracking, shadow effect, PV cell temperature impact on system efficiency, and Texas A&M University as a case study. The evaluated parameters of the proposed system include energy output, array yield, final yield, array and system losses, capacity factor, performance ratio, return on investment, payback period, Levelized cost of energy, and carbon emission. According to the overall performance results of the proposed PV system, it is found to be a technically, economically, and environmentally feasible solution for electricity generation and would play a significant role in the future energy mix of Texas.

scholarly journals Extremum Seeking for Wind and Solar Energy Applications

2014 ◽  
Vol 136 (03) ◽  
pp. S13-S21 ◽  
Author(s):  
Azad Ghaffari ◽  
Miroslav Krstic ◽  
Sridhar Seshagiri
Keyword(s):  
Solar Energy ◽  
Experimental Results ◽  
Photovoltaic System ◽  
Extremum Seeking ◽  
Attractive Alternative ◽  
Optimization Approach ◽  
Energy Applications ◽  
Pv Systems ◽  
Model Free ◽  
Point Tracking

This paper explores the advantages of extremum seeking (ES) for wind and solar energy applications. The experimental results are also provided for the photovoltaic system. ES is an attractive alternative to perturb and observe (P&O) techniques for solving maximum power point tracking (MPPT) problems in wind and solar systems. As a model-free, real-time optimization approach, ES is well suited for systems with unknown dynamics or those that are affected by high levels of uncertainty or external dynamics, like wind turbines (WT) and PV systems. ES has the dual benefit of rigorously provable convergence and the simplicity of hardware implementation. In addition to a probing signal, the ES algorithm employs only an integrator, as well as optional high-pass and a low-pass filters. Finally, multivariable MPPT based on ES for PV systems are presented, and the validity of the proposed algorithms with experimental results are verified. Experimental results verify the effectiveness of the Newton-based MPPT versus its scalar and multivariable gradient-based counterparts.

Sign in / Sign up

Export Citation Format

Share Document