EFFECT OF FORCING SOLUTION COMPOSITION ON BUDBREAK AND SHOOT ELONGATION OF FOUR HYBRID HAZELNUT GENOTYPES

2001 ◽  
pp. 259-262
Author(s):  
S. Ercisli ◽  
P.E. Read ◽  
M.N. Nas
Keyword(s):  
Shoot Elongation ◽  
Solution Composition ◽  
Forcing Solution

scholarly journals 107 Silver Thiosulfate (STS) Alone and in Combination with Gibberellic Acid (GA3) in the Forcing Solution Influences Budbreak and Shoot Elongation of Dormant Woody Plant Species

HortScience ◽  
1999 ◽  
Vol 34 (3) ◽  
pp. 460A-460
Author(s):  
Bahget T. Hamooh ◽  
Paul E. Read
Keyword(s):  
Gibberellic Acid ◽  
Effective Treatment ◽  
Woody Plants ◽  
Woody Plant ◽  
Shoot Elongation ◽  
Shoot Length ◽  
Solution System ◽  
Silver Thiosulfate ◽  
Cornus Alba ◽  
Forcing Solution

Research was conducted to further modify the forcing solution system in order to expedite the propagation of woody plants, such as Spiraea canescens, Lonicera maakii, and Cornus alba. Time of immersion in solutions containing 5 mM silver thiosulfate (STS) was compared with the basic forcing solution reported by Yang and Read (1989), a solution containing 200 mg 8-hydroxyquinoline citrate per liter and 2% sucrose. Other treatments employed were gibberellic acid (GA3) 50 mg per liter for 24 h and a combination of STS and GA3 for the same amount of time. Increasing the time in STS solution up to 24 h led to higher percent budbreak and shorter time to budbreak for all the three species examined. The combination of STS and GA3 was the most effective treatment overall in reducing time of budbreak and increasing percent of budbreak. All STS treatments studied showed similar responses in shoot elongation. However, treatments with GA3 alone, and in combination with STS showed more than a doubling in shoot length compared to all STS treatments studied and the control. Implications based on SEM observations will be presented.

scholarly journals 569 PB 012 A MODIFIED FORCING SOLUTION SYSTEM PROMOTES PROPAGATION OF WOODY SPECIES

HortScience ◽  
1994 ◽  
Vol 29 (5) ◽  
pp. 513c-513
Author(s):  
Guochen Yang ◽  
Paul E. Read
Keyword(s):  
Root Length ◽  
Woody Species ◽  
Shoot Elongation ◽  
Bud Break ◽  
Root Number ◽  
Negative Effects ◽  
Solution System ◽  
Forcing Solution

A forcing solution containing 200 mg 8-hydroxyquinoline citrate per liter and 2% sucrose has enhanced availability of cutting materials by forcing dormant woody stems in the off-season. Anxins, such as IBA, included in the forcing solution promoted subsequent rooting by increasing root number per cutting and root length for privet. Inclusion of IBA in the forcing solution following the initial use of GA3 in the forcing solution counteracted the undesirable effects of GA3 on rooting and stimulated rooting after taking advantage of the favorable effects of GA3 on bud break and shoot elongation. However, the ability of IBA to counteract the negative effects of GA3 on rooting was dependent on the length of GA3 treatment. The modification of forcing solution system by sequentially including GA3 and then replacing GA3 with IBA expedited propagation of privet. Production of candidate cuttings or explants was stimulated by including GA3 in the forcing solution, and rooting of the cuttings was promoted by subsequent auxin or cytokinin inclusions in the forcing solution to replace GA3 This modified forcing solution system also proved to be a successful and efficient model for propagation of other difficult to propagate woody species.

scholarly journals SEQUENCING OF FORCING SOLUTION PLANT GROWTH REGULATORS ENHANCES MACROPROPAGATION OF LIGUSTRUM VULGARE L. BY SOFTWOOD CUTTINGS

HortScience ◽  
1992 ◽  
Vol 27 (6) ◽  
pp. 608a-608
Author(s):  
Guochen Yang ◽  
Paul E. Read
Keyword(s):  
Plant Growth ◽  
Plant Growth Regulators ◽  
Growth Regulators ◽  
Woody Plants ◽  
Woody Plant ◽  
Shoot Elongation ◽  
Root Number ◽  
Negative Effects ◽  
Rooting Of Cuttings ◽  
Forcing Solution

A forcing solution containing 200 mg 8-hydroxyquinoline citrate per liter and 2% sucrose has been demonstrated to extend the season for obtaining softwood growth suitable for use as explants in micropropagation (Yang & Read 1989). Forcing dormant woody stems in the off-season in this fashion also enhances the macropropagation of woody plant species by providing softwood outgrowth that can be rooted as softwood cuttings. GA3, IBA, IAA and NAA were incorporated into softwood growth which was later used as cuttings for rooting by adding plant growth regulators at various concentrations to the forcing solution. GA3 incorporated into the forcing solution hastened bud break, increased shoot elongation, but inhibited rooting of softwood cuttings taken from stems forced in this manner. IBA, IAA and NAA in the forcing solution exhibited typical auxin effects on rooting of cuttings by increasing root number per cutting and root elongation. In order to expedite macropropagation of woody plants, GA3 and IBA were added SEQUENTIALLY to the forcing solution. Addition of IBA to fresh forcing solution following initial use of GA3 in the forcing solution counteracted the negative effects of GA3 and stimulated rooting. This protocol is proposed as a method to assist propagation in rooting difficult species by softwood cuttings in the off-season.

Role of putrescine in enhancing shoot elongation in Scirpus mucronatus under submergence

1996 ◽  
Vol 96 (3) ◽  
pp. 419-424
Author(s):  
Tse-Min Lee ◽  
Yuh-Jang Shieh ◽  
Chang-Hung Chou
Keyword(s):  
Shoot Elongation

Cyclanilide Spray Increases Branching in Containerized Whip Production

2007 ◽  
Vol 25 (4) ◽  
pp. 221-228
Author(s):  
Petra Sternberg ◽  
Daniel K. Struve
Keyword(s):  
Shoot Elongation ◽  
Major Goal ◽  
Mature Tree ◽  
Lateral Branching ◽  
Reduced Height ◽  
Second Year ◽  
One Year ◽  
Tree Quality ◽  
Tree Pruning ◽  
Number Of Branches

Abstract A major goal in the production of tree whips is to produce appropriately sized, well-branched liners with a crown form similar to that of a mature tree. Pruning is used to induce lateral branching. This can result in poor tree quality, reduced growth and the practice is labor intensive. An alternative to mechanical pruning, foliar Cyclanilide® (CYC) sprays at 0, 56, 1 12 and 223 ppm were applied to container grown whips to determine its effect on branching of Amelanchier; Cercis, Malus and Tilia whips. Most species responded to CYC sprays with increased lateral branching if treated during active shoot elongation. Cyclanilide® sprays of 1 12 ppm produced the greatest number of branches. Sprays at 56 ppm resulted in reduced branching (relative to 112 ppm), while sprays of 223 ppm did not increase the number of branches, relative to sprays of 112 ppm, but reduced growth. Cyclanilide® sprays reduced height growth, relative to untreated whips, but did not alter height diameter growth. Cyclanilide® foliar applications to container -grown whips during periods of active shoot elongation increased branching in one-year-old whips that normally do not branch until the second year of production. Further, the origin of lateral branching can be controlled by timing of CYC application. The results indicate that CYC foliar sprays can be an important tool in the production of one-year-old branched whips.

Growth and Branching Responses of Portulaca grandiflora to Foliar Applications of Chemical Growth Regulators

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 447c-447
Author(s):  
T.J. Banko ◽  
M.A. Stefani
Keyword(s):  
Growth Regulators ◽  
Growth Habit ◽  
Stem Elongation ◽  
Block Design ◽  
Shoot Elongation ◽  
Main Shoot ◽  
Randomized Complete Block Design ◽  
Portulaca Grandiflora ◽  
Prostrate Growth ◽  
Secondary Shoot

During container production of portulaca, growth of long, prostrate, sparsely branched stems makes handling of plants difficult, and reduces their commercial appeal. Growers prefer to minimize shoot elongation while increasing branching to provide a full, compact plant. The objectives of this study were to evaluate growth regulators for promotion of branching and inhibition of stem elongation. Container-grown plants ≈21 cm in diameter were treated with sprays of ProShear (benzylaminopurine) at 62.4, 125, and 250 ppm; Promalin (benzyaminopurine + gibberellins 4+7) at 125, 250, and 500 ppm; Atrimmec (dikegulac) at 250, 500, and 750 ppm; and Florel (ethephon) at 250, 500, and 750 ppm. These treatments were compared with untreated controls in a randomized complete-block design. Main shoot lengths were measured at 16, 31, and 51 days after treatment (DAT). Numbers of new shoot breaks were counted 16 DAT. The growth habit, that is, tendency to grow upright or prostrate, was also evaluated 16 DAT. The most-effective material for retarding primary shoot elongation and for stimulating secondary shoot development was ProShear. At 16 DAT, 250 ppm ProShear reduced shoot elongation by 25% compared to control plants. This treatment also increased the number of secondary shoot breaks by 143%. Promalin increased the number of new shoot breaks, but it also increased the lengths of all shoots. High rates of Florel and Promalin caused shoots to grow predominantly upright rather then prostrate. ProShear, however, caused more prostrate growth as rate increased.

Effect of ionizing radiation on the kinetics of hydrogenation on the Ni-MgO mixed catalyst

1982 ◽  
Vol 47 (7) ◽  
pp. 1780-1786 ◽  
Author(s):  
Rostislav Kudláček ◽  
Jan Lokoč
Keyword(s):  
Experimental Data ◽  
Activation Energy ◽  
Liquid Phase ◽  
Ionizing Radiation ◽  
Oxide Catalyst ◽  
Absorbed Dose ◽  
Hydrogenation Rate ◽  
Solution Composition ◽  
Mixed Catalyst ◽  
Kinetics Of

The effect of gamma pre-irradiation of the mixed nickel-magnesium oxide catalyst on the kinetics of hydrogenation of maleic acid in the liquid phase has been studied. The changes of the hydrogenation rate are compared with the changes of the adsorbed amount of the acid and with the changes of the solution composition, activation energy, and absorbed dose of the ionizing radiation. From this comparison and from the interpretation of the experimental data it can be deduced that two types of centers can be distinguished on the surface of the catalyst under study, namely the sorption centres for the acid and hydrogen and the reaction centres.

scholarly journals Rheological and Microstructural Features of Plant Culture Media Doped with Biopolymers: Influence on the Growth and Physiological Responses of In Vitro-Grown Shoots of Thymus lotocephalus

2021 ◽  
Vol 2 (2) ◽  
pp. 538-553
Author(s):  
Natacha Coelho ◽  
Alexandra Filipe ◽  
Bruno Medronho ◽  
Solange Magalhães ◽  
Carla Vitorino ◽  
...  
Keyword(s):  
In Vitro Culture ◽  
Culture Medium ◽  
Culture Media ◽  
Average Pore Size ◽  
Physiological Responses ◽  
Gum Arabic ◽  
Shoot Elongation ◽  
Hydroxyethyl Cellulose ◽  
Plant Culture

In vitro culture is an important biotechnological tool in plant research and an appropriate culture media is a key for a successful plant development under in vitro conditions. The use of natural compounds to improve culture media has been growing and biopolymers are interesting alternatives to synthetic compounds due to their low toxicity, biodegradability, renewability, and availability. In the present study, different culture media containing one biopolymer (chitosan, gum arabic) or a biopolymer derivative [hydroxyethyl cellulose (HEC), carboxymethyl cellulose (CMC)], at 100 or 1000 mg L−1, were tested regarding their influence on the growth and physiological responses of Thymus lotocephalus in vitro culture. Cellulose-based biopolymers (HEC and CMC) and gum arabic were used for the first time in plant culture media. The results showed that CMC at 100 mg L−1 significantly improved shoot elongation while chitosan, at the highest concentration, was detrimental to T. lotocephalus. Concerning only the evaluated physiological parameters, all tested biopolymers and biopolymer derivatives are safe to plants as there was no evidence of stress-induced changes on T. lotocephalus. The rheological and microstructural features of the culture media were assessed to understand how the biopolymers and biopolymer derivatives added to the culture medium could influence shoot growth. As expected, all media presented a gel-like behaviour with minor differences in the complex viscosity at the beginning of the culture period. Most media showed increased viscosity overtime. The surface area increased with the addition of biopolymers and biopolymer derivatives to the culture media and the average pore size was considerably lower for CMC at 100 mg L−1. The smaller pores of this medium might be related to a more efficient nutrients and water uptake by T. lotocephalus shoots, leading to a significant improvement in shoot elongation. In short, this study demonstrated that the different types of biopolymers and biopolymer derivatives added to culture medium can modify their microstructure and at the right concentrations, are harmless to T. lotocephalus shoots growing in vitro, and that CMC improves shoot length.

Sign in / Sign up

Export Citation Format

Share Document