scholarly journals Application of piezoelectric cells printing on three-dimensional porous bioceramic scaffold for bone regeneration

2019 ◽  
Vol 5 (2) ◽  
pp. 22 ◽  
Author(s):  
Ming-You Shie ◽  
Hsin-Yuan Fang ◽  
Yen-Hong Lin ◽  
Alvin Kai-Xing Lee ◽  
Joyce Yu ◽  
...  
Keyword(s):  
Cell Attachment ◽  
Three Dimensional ◽  
Fluorescein Isothiocyanate ◽  
Cellular Adhesion ◽  
Additive Manufacture ◽  
Cell Printing ◽  
Ceramic Scaffold ◽  
Porous Bioceramic ◽  
Bone Structures ◽  
Extrusion Technology

In recent years, the additive manufacture was popularly used in tissue engineering, as the various technologies for this field of research can be used. The most common method is extrusion, which is commonly used in many bioprinting applications, such as skin. In this study, we combined the two printing techniques; first, we use the extrusion technology to form the ceramic scaffold. Then, the stem cells were printed directly on the surface of the ceramic scaffold through a piezoelectric nozzle. We also evaluated the effects of polydopamine (PDA)-coated ceramic scaffolds for cell attachment after printing on the surface of the scaffold. In addition, we used fluorescein isothiocyanate to simulate the cell adhered on the scaffold surface after ejected by a piezoelectric nozzle. Finally, the attachment, growth, and differentiation behaviors of stem cell after printing on calcium silicate/polycaprolactone (CS/PCL) and PDACS/PCL surfaces were also evaluated. The PDACS/PCL scaffold is more hydrophilic than the original CS/PCL scaffold that provided for better cellular adhesion and proliferation. Moreover, the cell printing technology using the piezoelectric nozzle, the different cells can be accurately printed on the surface of the scaffold that provided and analyzed more information of the interaction between different cells on the material. We believe that this method may serve as a useful and effective approach for the regeneration of defective complex hard tissues in deep bone structures.

Biodegradable Foams for Cell Transplantation

1993 ◽  
Vol 331 ◽  
Author(s):  
H. Lo ◽  
S. Kadiyala ◽  
S. E. Guggino ◽  
K. W. Leong
Keyword(s):  
Cell Transplantation ◽  
Cell Attachment ◽  
Mercury Porosimetry ◽  
Three Dimensional ◽  
Fluorescein Isothiocyanate ◽  
Processing Technique ◽  
Microcellular Foams ◽  
Complex Shapes ◽  
The Matrix ◽  
Design Requirements

AbstractA processing technique based on the principle of phase separation was developed to fabricate three-dimensional microcellular foams to act as templates for cell transplantation. The polymers used to make the foams were polylactic acid (PLLA) and a polyphosphoester (BPA/PP). The resulting foams had relatively uniform, open cells throughout the matrix. The foams could also be fabricated into complex shapes to meet specific design requirements. The foam morphology and microstructure were characterized by mercury porosimetry and scanning electron microscopy. Osteoblast like cells ROS17/2.8 were successfully cultured in the foams. Cell attachment to the foam interior was verified by confocal microscopy. The fabrication technique allows incorporation of drugs or nutrients into the highly porous structure as demonstrated by the intimate dispersion of fluorescein isothiocyanate (FITC) in the matrix.

scholarly journals Adhesion Kinetics of MC3T3-E1 Pre-Osteoblasts to Osteoconductive Porous Titanium Scaffolds

2004 ◽  
Vol 823 ◽  
Author(s):  
Jean-Philippe St-Pierre ◽  
Maxime Gauthier ◽  
Louis-Philippe Lefebvre ◽  
Maryam Tabrizian
Keyword(s):  
Bone Growth ◽  
Three Dimensional ◽  
Porous Titanium ◽  
Cellular Adhesion ◽  
Cellular Interactions ◽  
Microstructural Parameters ◽  
Powder Metallurgy Process ◽  
Novel Material ◽  
Bone Structures

AbstractPorous metallic scaffolds have recently gained recognition as a promising avenue toward the regeneration of damaged bone structures. Interest in these materials resides in their ability to guide bone growth by presenting a favorable structure for cellular adhesion and three-dimensional proliferation. A powder metallurgy process to fabricate titanium foams with favorable microstructural parameters for applications in bone engineering has recently been developed. This study assesses the potential of this novel material for applications as an osteoconductive scaffold throughin vitrocharacterization of early cellular interactions with titanium foams having pore sizes ranging from 167 to 500 µm. The foams exhibit no cytotoxic effects on J774 mouse macrophages while favoring adhesion and proliferation of MC3T3-E1 pre-osteoblasts. Three-dimensional morphology assumed by these cells on porous titanium suggests that the microstructure of the foams is biomimetic.

scholarly journals Recent Trends in Three-Dimensional Bioinks Based on Alginate for Biomedical Applications

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 3980 ◽  
Author(s):  
Farnoosh Pahlevanzadeh ◽  
Hamidreza Mokhtari ◽  
Hamid Reza Bakhsheshi-Rad ◽  
Rahmatollah Emadi ◽  
Mahshid Kharaziha ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Review Paper ◽  
Cell Attachment ◽  
Three Dimensional ◽  
Natural Polymers ◽  
Cell Printing ◽  
Tissue Printing ◽  
Artificial Tissue ◽  
Recent Trends ◽  
Synthetic And Natural Polymers

Three-dimensional (3D) bioprinting is an appealing and revolutionary manufacturing approach for the accurate placement of biologics, such as living cells and extracellular matrix (ECM) components, in the form of a 3D hierarchical structure to fabricate synthetic multicellular tissues. Many synthetic and natural polymers are applied as cell printing bioinks. One of them, alginate (Alg), is an inexpensive biomaterial that is among the most examined hydrogel materials intended for vascular, cartilage, and bone tissue printing. It has also been studied pertaining to the liver, kidney, and skin, due to its excellent cell response and flexible gelation preparation through divalent ions including calcium. Nevertheless, Alg hydrogels possess certain negative aspects, including weak mechanical characteristics, poor printability, poor structural stability, and poor cell attachment, which may restrict its usage along with the 3D printing approach to prepare artificial tissue. In this review paper, we prepare the accessible materials to be able to encourage and boost new Alg-based bioink formulations with superior characteristics for upcoming purposes in drug delivery systems. Moreover, the major outcomes are discussed, and the outstanding concerns regarding this area and the scope for upcoming examination are outlined.

Surgical considerations during cochlear implantation: the utility of temporal bone computed tomography

2021 ◽  
pp. 1-8
Author(s):  
Beomcho Jun ◽  
Sunwha Song
Keyword(s):  
Computed Tomography ◽  
Temporal Bone ◽  
Cochlear Implantation ◽  
Round Window ◽  
Three Dimensional ◽  
Electrode Placement ◽  
Posterior Tympanotomy ◽  
Electrode Insertion ◽  
Window Approach ◽  
Bone Structures

Abstract Objective This paper describes the construction of portals for electrode placement during cochlear implantation and emphasises the utility of pre-operative temporal bone three-dimensional computed tomography. Methods Temporal bone three-dimensional computed tomography was used to plan portal creation for electrode insertion. Results Pre-operative temporal bone three-dimensional computed tomography can be used to determine the orientation of temporal bone structures, which is important for mastoidectomy, posterior tympanotomy and cochleostomy, and when using the round window approach. Conclusion It is essential to create appropriate portals (from the mastoid cortex to the cochlea) in a step-by-step manner, to ensure the safe insertion of electrodes into the scala tympani. Pre-operative three-dimensional temporal bone computed tomography is invaluable in this respect.

scholarly journals Osteogenic Properties of 3D-Printed Silica-Carbon-Calcite Composite Scaffolds: Novel Approach for Personalized Bone Tissue Regeneration

2021 ◽  
Vol 22 (2) ◽  
pp. 475
Author(s):  
Parastoo Memarian ◽  
Francesco Sartor ◽  
Enrico Bernardo ◽  
Hamada Elsayed ◽  
Batur Ercan ◽  
...  
Keyword(s):  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Cell Attachment ◽  
Three Dimensional ◽  
Bone Tissue Regeneration ◽  
Hemolysis Assay ◽  
Novel Approach ◽  
Related Transcription Factor ◽  
Diphenyl Tetrazolium Bromide

Carbon enriched bioceramic (C-Bio) scaffolds have recently shown exceptional results in terms of their biological and mechanical properties. The present study aims at assessing the ability of the C-Bio scaffolds to affect the commitment of canine adipose-derived mesenchymal stem cells (cAD-MSCs) and investigating the influence of carbon on cell proliferation and osteogenic differentiation of cAD-MSCs in vitro. The commitment of cAD-MSCs to an osteoblastic phenotype has been evaluated by expression of several osteogenic markers using real-time PCR. Biocompatibility analyses through 3-(4,5-dimethyl- thiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT), lactate dehydrogenase (LDH) activity, hemolysis assay, and Ames test demonstrated excellent biocompatibility of both materials. A significant increase in the extracellular alkaline phosphatase (ALP) activity and expression of runt-related transcription factor (RUNX), ALP, osterix (OSX), and receptor activator of nuclear factor kappa-Β ligand (RANKL) genes was observed in C-Bio scaffolds compared to those without carbon (Bio). Scanning electron microscopy (SEM) demonstrated excellent cell attachment on both material surfaces; however, the cellular layer on C-Bio fibers exhibited an apparent secretome activity. Based on our findings, graphene can improve cell adhesion, growth, and osteogenic differentiation of cAD-MSCs in vitro. This study proposed carbon as an additive for a novel three-dimensional (3D)-printable biocompatible scaffold which could become the key structural material for bone tissue reconstruction.

Modification of fibroblast surface amines alters receptor-mediated cell spreading on protein-coated substrata but not adsorptive endocytosis

1981 ◽  
Vol 49 (1) ◽  
pp. 283-297
Author(s):  
J.D. Aplin ◽  
R.C. Hughes
Keyword(s):  
Cell Attachment ◽  
Surface Membrane ◽  
Fluorescein Isothiocyanate ◽  
Adhesive Interaction ◽  
Cultured Fibroblasts ◽  
Amine Groups ◽  
Coated Surfaces ◽  
Amine Compounds ◽  
Membrane Components ◽  
Dose Dependent

Fluorescein isothiocyanate (FITC) and other anionic reagents specific for amine groups have previously been shown to inhibit the adhesion and spreading of cultured fibroblasts to fibronectin-coated surfaces (Butters, Devalia, Aplin & Hughes, 1980). Here it is demonstrated that a population of FITC-labelled cells can be separated using flow cytometry into fractions displaying greater and lesser adhesivity at lower and higher fluorescence, respectively, demonstrating that the inhibition is dose-dependent. Glass coverslips covalently derivatized with the lectins ricin and concanavalin A are used to show that the inhibition also occurs in lectinmediated cell adhesion as well as in adhesion to collagen coated with fibronectin and plastic coated with serum or antibody, suggesting that all of these responses share a common, FITC-sensitive component. Simple primary amine compounds inhibit adhesion to fibronectin, but specific inhibitors of transglutaminases do not affect the process. Transglutaminase activity of cell surfaces has been implicated in protein endocytosis and receptor recycling (Davies et al. 1980). FITC modification of cells appears to affect specifically adhesive interaction, since ricin cytotoxicity and infection of cells with influenza and Sendai viruses (phenomena thought to proceed by means of receptor-mediated endocytosis) are unaffected. Evidently, receptor-mediated cell attachment, spreading on protein-coated surfaces and protein endocytosis are functionally separate events requiring different cell-surface membrane components, even when the same protein (ricin) is used to trigger these 2 processes.

scholarly journals Hematopoiesis in 3 dimensions: human and murine bone marrow architecture visualized by confocal microscopy

Blood ◽  
2010 ◽  
Vol 116 (15) ◽  
pp. e41-e55 ◽  
Author(s):  
Tomoiku Takaku ◽  
Daniela Malide ◽  
Jichun Chen ◽  
Rodrigo T. Calado ◽  
Sachiko Kajigaya ◽  
...  
Keyword(s):  
Bone Marrow ◽  
Three Dimensional ◽  
Cell Types ◽  
Bone Marrow Tissue ◽  
Murine Bone Marrow ◽  
3 Dimensional ◽  
Vascular Structures ◽  
Bone Structures ◽  
Surrounding Bone

AbstractIn many animals, blood cell production occurs in the bone marrow. Hematopoiesis is complex, requiring self-renewing and pluripotent stem cells, differentiated progenitor and precursor cells, and supportive stroma, adipose tissue, vascular structures, and extracellular matrix. Although imaging is a vital tool in hematology research, the 3-dimensional architecture of the bone marrow tissue in situ remains largely uncharacterized. The major hindrance to imaging the intact marrow is the surrounding bone structures are almost impossible to cut/image through. We have overcome these obstacles and describe a method whereby whole-mounts of bone marrow tissue were immunostained and imaged in 3 dimensions by confocal fluorescence and reflection microscopy. We have successfully mapped by multicolor immunofluorescence the localization pattern of as many as 4 cell features simultaneously over large tiled views and to depths of approximately 150 μm. Three-dimensional images can be assessed qualitatively and quantitatively to appreciate the distribution of cell types and their interrelationships, with minimal perturbations of the tissue. We demonstrate its application to normal mouse and human marrow, to murine models of marrow failure, and to patients with aplastic anemia, myeloid, and lymphoid cell malignancies. The technique should be generally adaptable for basic laboratory investigation and for clinical diagnosis of hematologic diseases.

Three-Dimensional Computer Reconstruction of a Temporal Bone

1989 ◽  
Vol 101 (5) ◽  
pp. 522-526 ◽  
Author(s):  
Charles Lutz ◽  
Akira Takagi ◽  
Ivo P. Janecka ◽  
Isamu Sando
Keyword(s):  
Temporal Bone ◽  
Internal Carotid ◽  
Computer Graphic ◽  
Three Dimensional ◽  
Computer Assisted ◽  
Computer Reconstruction ◽  
Temporal Bone Anatomy ◽  
Bone Structures ◽  
Graphic Software ◽  
Computer Graphics System

The complexities of the temporal bone and the critical inter-relationships among its key structures can be simplified with three-dimensional computer-assisted reconstruction. Knowledge of the topography of these structures and their mutual relationships in essential in any surgical approach to the temporal bone. Sixty sagittal histologic sections of a normal left temporal bone were examined. Each section, 30 μm in thickness, was optically enlarged. Segments representing the facial nerve, internal carotid artery, and inner ear structures from individual slides were traced and data were entered into a computer. A personal computer was used for data processing and analysis. Graphic software developed in our laboratory generated images with x-y-z coordinates that could be rotated In any plane. The high resolution of the computer graphics system, combined with the precision of histologic sections, permitted study of the critical three-dimensional anatomic relationships among essential intratemporal bone structures. The capability of reproducing individual and joint images of the intratemporal bone structures and viewing them from all surgical angles gives skull base and otologic surgeons Important topographic guidance. Accurate spatial measurements of temporal bone anatomy are now possible with the application of computer graphic technology.

Additive manufactured multi-material structure with directional specific mechanical properties based upon classical lamination theory

2018 ◽  
Vol 24 (7) ◽  
pp. 1212-1220 ◽  
Author(s):  
Sugavaneswaran M. ◽  
Arumaikkannu G.
Keyword(s):  
Mechanical Properties ◽  
Three Dimensional ◽  
Additive Manufacture ◽  
Material Structure ◽  
Loading Conditions ◽  
Content Type ◽  
Three Dimensional Printing ◽  
Classical Lamination Theory ◽  
Innovative Methodology ◽  
Lamination Theory

Purpose This paper aims to additive manufacture (AM) the multi-material (MM) structure with directional-specific mechanical properties based on the classical lamination theory of composite materials. Design/methodology/approach The polyjet three-dimensional printing (3DP) process is used to fabricate the MM structure with directional-specific mechanical properties. MMs within a layer are positioned and oriented based on the classical lamination theory to achieve directional-specific properties. Mechanical behavior of the AM structure was examined under various loading conditions to justify the directional-specific properties. Findings With MM processing capabilities of the polyjet 3DP machine, AM MM structures with directional-specific mechanical properties were fabricated. From experimentation, it was observed that the AM MM structure with a quasi-isotropic laminate has superior tensile and flexural strength, and the AM MM structure with an angle ply laminate has superior shear strength. Various mechanical properties determined through testing will be useful for the selection of an appropriate layup arrangement within a structure for appropriate loading conditions. Originality/value This study presents the innovative methodology for the fabrication of AM MM structures with tailor-made mechanical properties. The developed methodology paves way for using the polyjet 3DP MM structure for applications such as the complaint mechanism, snap fits and thin features, which require directional-specific properties.

scholarly journals BIPLANAR IMAGING WITH TRIDIMENSIONAL CAPABILITIES: APPLICABILITY OF THIS NEW EXAMINATION TO SPINAL DEFORMITIES

2020 ◽  
Vol 19 (1) ◽  
pp. 67-70
Author(s):  
RAPHAEL DE REZENDE PRATALI ◽  
MURILO TAVARES DAHER ◽  
ROBERT MEVES
Keyword(s):  
Spinal Deformity ◽  
Imaging System ◽  
Adult Spinal Deformity ◽  
Three Dimensional ◽  
Entire Body ◽  
Spinal Deformities ◽  
Compensatory Mechanisms ◽  
Level Of Evidence ◽  
The Individual ◽  
Bone Structures

ABSTRACT This study presents details about the applicability of the new image acquisition system, called the biplanar imaging system, with three-dimensional capabilities (EOS®) to the treatment of spinal deformities. This system allows radiographic acquisition of the entire body, with a great reduction in the dose of radiation absorbed by the patient and three-dimensional (3D) stereoradiographic image reconstruction of bone structures, including the spine. In the case of adolescent idiopathic scoliosis, the analysis of the spinal deformity with 3D reconstruction allows better understanding of the deformity and surgical planning. In the case of adult spinal deformity, full-body analysis allows an evaluation of the spinopelvic deformity, including loss of sagittal alignment, in addition to an evaluation of compensatory mechanisms recruited by the individual in an attempt to maintain the sagittal balance. Level of evidence III; Descriptive Review.

Sign in / Sign up

Export Citation Format

Share Document