scholarly journals Life Cycle Assessment of Material Recovery from Pyrolysis Process of End-of-Life Tires in Thailand

2020 ◽  
Vol 11 (10) ◽  
pp. 488-498
Author(s):  
Tarinee Buadit ◽  
◽  
Cheerawit Rattanapan ◽  
Achara Ussawarujikulchai ◽  
Krisda Suchiva ◽  
...  
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Human Health ◽  
Electricity Consumption ◽  
Resource Scarcity ◽  
The Other ◽  
Pyrolysis Process ◽  
Terrestrial Ecotoxicity ◽  
Fossil Resource

It is estimated that around 600,000 tons of end-of-life tires are generated annually in Thailand. These waste tires will cause danger to the environment and human health if handled improperly. On the other hand, if managed with the proper technology, it will be transformed into valuable products. This research aims to evaluate the potential environmental impacts of a waste tire pyrolysis plant in Thailand by using the Life Cycle Assessment (LCA) method. The functional unit is defined as 1 ton of products from the pyrolysis process of waste tires. The system boundary consists of a pre-treatment and pyrolysis process (gate-to-gate). The LCA calculations were carried out using licensed SimaPro 9.0 software. At the impact assessment step, the ReCiPe2016 method both Midpoint (problem-oriented) and Endpoint (damage-oriented) were applied, and 7 impact categories were selected (global warming, fine particulate matter formation, terrestrial acidification, freshwater eutrophication, terrestrial ecotoxicity, freshwater ecotoxicity, and fossil resource scarcity). If the avoided products from the pyrolysis process, including pyrolysis oil, steel wire, and carbon black were taken into account, the characterization results show that 3 impacts: global warming, terrestrial ecotoxicity, and fossil resource scarcity have a negative value. While the other impacts still have a positive value resulted mainly from electricity consumption. When considering weighting end-point results, it found that human health impact was a major contribution with a totally negative value of -0.947 Pt. As a summary, the outcomes confirm that the utilization of pyrolysis avoided products and the optimization of electricity consumption in the process has the potential to drives pyrolysis to become an environmentally effective technology for end-of-tires management.

scholarly journals Life Cycle Assessment of Households in Santiago, Chile: Environmental Hotspots and Policy Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2525
Author(s):  
Camila López-Eccher ◽  
Elizabeth Garrido-Ramírez ◽  
Iván Franchi-Arzola ◽  
Edmundo Muñoz
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Food Consumption ◽  
Household Income ◽  
Resource Scarcity ◽  
Life Cycles ◽  
The Impact ◽  
Freshwater Eutrophication

The aim of this study is to assess the environmental impacts of household life cycles in Santiago, Chile, by household income level. The assessment considered scenarios associated with environmental policies. The life cycle assessment was cradle-to-grave, and the functional unit considered all the materials and energy required to meet an inhabitant’s needs for one year (1 inh/year). Using SimaPro 9.1 software, the Recipe Midpoint (H) methodology was used. The impact categories selected were global warming, fine particulate matter formation, terrestrial acidification, freshwater eutrophication, freshwater ecotoxicity, mineral resource scarcity, and fossil resource scarcity. The inventory was carried out through the application of 300 household surveys and secondary information. The main environmental sources of households were determined to be food consumption, transport, and electricity. Food consumption is the main source, responsible for 33% of the environmental impacts on global warming, 69% on terrestrial acidification, and 29% on freshwater eutrophication. The second most crucial environmental hotspot is private transport, whose contribution to environmental impact increases as household income rises, while public transport impact increases in the opposite direction. In this sense, both positive and negative environmental effects can be generated by policies. Therefore, life-cycle environmental impacts, the synergy between policies, and households’ socio-economic characteristics must be considered in public policy planning and consumer decisions.

Comparative Life Cycle Assessment of Autoclaved Concrete Blocks and Fired Blocks in China

2018 ◽  
Vol 913 ◽  
pp. 1018-1026
Author(s):  
Yan Qiong Sun ◽  
Yu Liu ◽  
Su Ping Cui
Keyword(s):  
Sensitivity Analysis ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Data Quality ◽  
Human Health ◽  
Functional Unit ◽  
Cement Production ◽  
Terrestrial Ecotoxicity ◽  
Concrete Blocks

In this paper, a variety of blocks were grouped into the autoclaved blocks and fired blocks as far as the productive technology is concerned. In order to compare the life cycle impacts of the two kinds of the blocks, a life cycle assessment of two products on the functional unit 1m3 was carried out through the exploitation of mineral stage, transportation stage and the production of the blocks stage on the considering of the resource and energy consumption and the pollutant discharges. The results demonstrated that the fired blocks appeared to have less impact than autoclaved concrete blocks on human health, marine ecotoxicity toxicity and terrestrial ecotoxicity toxicity nearly 30%. The raw coal led to the serious impacts on the fossil depletion through the cement production stage of the autoclaved concrete blocks accounting for 45.86% and the gangue exploitation stage of the fired blocks accounting for 42.5%. Assessment of the data quality that the data was of pretty high or within the permission. The sensitivity analysis and contribution analysis assessment showed that the conclusion were robust.

scholarly journals Environmental Impacts Evaluation of Sorbitol Production from Glucose

Eksergi ◽  
2019 ◽  
Vol 16 (1) ◽  
pp. 7 ◽  
Author(s):  
Rifkah Akmalina
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Global Warming Potential ◽  
Energy Demand ◽  
Electricity Consumption ◽  
Sustainable Improvement ◽  
Photochemical Oxidants ◽  
Main Consumer

A life cycle assessment (LCA) has been performed on sorbitol production from glucose, which aims to quantify and evaluate the environmental impacts that produced from the process. SuperPro Designer software was employed to perform the process simulation, while SimaPro was used to quantify the LCA.Potency of global warming, acidification, eutrophication, photochemical oxidants creation, abiotic depletion, and ozone layer depletion were evaluated. A gate-to-gate LCA study of sorbitol production showed that global warming potential (GWP) had the largest impact to environment with the value of 3.551 kg CO2 eq/kg sorbitol. Glucose and electricity consumption were known as two major contributors to GWP, and hydrogen reactor was the main consumer of electricity. The use of glucose were responsible for more than 50% of total environmentalimpact in each category. Performing heat integration in sorbitol processing is highly recommended for gate-togate system to reduce energy demand, thus decreasing the environmental impacts. Therefore, this LCA study may be applied to perform a sustainable improvement on sorbitol production process.Keywords: sorbitol; life cycle assessment; global warming potential

scholarly journals Life Cycle Assessment of External Vertical Closing Systems: Sealing Masonry vs. Structural Masonry – a Brazilian Case Study

2021 ◽  
Author(s):  
Cláudio Henrique Pereira e Silva ◽  
Ricardo Augusto dos Santos Horta ◽  
Lineker Max Goulart Coelho ◽  
Raquel Diniz Oliveira
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Natural Resources ◽  
Human Health ◽  
Concrete Block ◽  
Resource Scarcity ◽  
Sustainable Construction ◽  
Construction Sites ◽  
Construction Techniques ◽  
Structural Blocks

The civil construction industry is one of the sectors that most consume natural resources in the world and, consequently, one of that generate more waste. Thinking about constructive techniques that generate less impact on the environment is vital to ensure sustainable development. In this scenario, the Life Cycle Assessment (LCA) has been presented as an internationally recognized approach, that assesses the potential impact of products and services on human health and the environment, throughout its entire life cycle. Aimed to identify construction techniques and vertical closing systems that generate less impact and consumption of natural resources, the impacts generated by the life cycle of the three vertical closing systems most applied in construction sites in Brazil were compared: ceramic brick masonry system (CBr); concrete block masonry system (CBk); and structural blocks masonry system (SBk). The SBk proved to be the least impacting to the “Resource Scarcity”, “Damage to Human Health”, and “Damage to the diversity of Ecosystems” interesting areas. This performance is directly related to the use of cement CPIII type and also by the fact that the SBk consumes less concrete and mortar than the others. Already the "Water Consumption" area, the CBk was the least impacting due to the lower consumption of electricity during its life cycle. The reliability of the results was proven through a sensitivity analysis of the normalization and characterization factors, which consisted of comparing the results obtained by applying two different methodologies. It is believed that the LCA study carried out can assist in the decision-making process regarding the choice of the most sustainable construction method.

scholarly journals Life Cycle Assessment of Autonomous Electric Field Tractors in Swedish Agriculture

2021 ◽  
Vol 13 (20) ◽  
pp. 11285
Author(s):  
Oscar Lagnelöv ◽  
Gunnar Larsson ◽  
Anders Larsolle ◽  
Per-Anders Hansson
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Global Warming Potential ◽  
Resource Scarcity ◽  
Key Factors ◽  
Agricultural Work ◽  
Single Score ◽  
Damage Categories

There is an increased interest for battery electric vehicles in multiple sectors, including agriculture. The potential for lowered environmental impact is one of the key factors, but there exists a knowledge gap between the environmental impact of on-road vehicles and agricultural work machinery. In this study, a life cycle assessment was performed on two smaller, self-driving battery electric tractors, and the results were compared to those of a conventional tractor for eleven midpoint characterisation factors, three damage categories and one weighted single score. The results showed that compared to the conventional tractor, the battery electric tractor had a higher impact in all categories during the production phase, with battery production being a majority contributor. However, over the entire life cycle, it had a lower impact in the weighted single score (−72%) and all three damage categories; human health (−74%), ecosystem impact (−47%) and resource scarcity (−67%). The global warming potential over the life cycle of the battery electric tractor was 102 kg CO2eq ha−1 y−1 compared to 293 kg CO2eq ha−1 y−1 for the conventional system. For the global warming potential category, the use phase was the most influential and the fuel used was the single most important factor.

scholarly journals Environmental Impact Assessment of Thai Minced Fish Paste (Surimi) Using Life Cycle Assessment Methodology

2020 ◽  
Vol 76 (3) ◽  
pp. 137-153
Author(s):  
Harnpon Phungrassami ◽  
Phairat Usubharatana
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Fuel Consumption ◽  
Environmental Impacts ◽  
Electricity Consumption ◽  
Impact Categories ◽  
Allocation Method ◽  
The Impact

Environmental impacts of fishery production have resulted in increased concern and awareness. Thailand, as one of the largest global fish exporters, faces challenges related to environmental problems caused by fishery processes. Here, the environmental impact of Thai surimi production was estimated based on life cycle assessment (LCA) methodology, focusing specifically on two Thai surimi products made from goatfish and ponyfish caught within the southern region of Thailand. Three impact categories where explored: global warming, acidification and eutrophication. Life cycle impacts were calculated for one kg of product using both mass and economic allocations. Results of this study indicated that goatfish has lower impacts than ponyfish for all the impact categories. Fuel consumption during the fishery phase and electricity consumption during processing were the main parameters leading to most of the considered environmental impacts. The value of Global Warming  Potential(GWP) ranged within 1.3‒3.0 kg CO2eq for goatfish and 2.2‒7.1 kg CO2eq ponyfish depending on the allocation method. The acidification impact of goatfish and ponyfish were revealed at 3.2‒7.3 gSO2eq and 12.7‒39.7 gSO2eq, respectively. The eutrophication of goatfish and ponyfish were 0.7‒1.6 gPO4eq and 2.5‒8.1 gPO4eq, respectively. Sensitivity analysis of fuel consumption, electricity consumption, product yield and allocation method were evaluated.

scholarly journals Kajian Daur Hidup (Life Cycle Assessment) dalam Produksi Pupuk Urea: Studi Kasus PT Pupuk Kujang

2019 ◽  
Vol 17 (3) ◽  
pp. 522
Author(s):  
Joni Safaat Adiansyah ◽  
Nailawati Prastiya Ningrum ◽  
Dyan Pratiwi ◽  
Hadiyanto Hadiyanto
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Fossil Fuel ◽  
Photochemical Oxidation ◽  
Human Toxicity ◽  
Ozone Layer Depletion ◽  
Aquatic Ecotoxicity ◽  
Terrestrial Ecotoxicity ◽  
Abiotic Depletion

Pupuk urea adalah merupakan salah satu jenis pupuk yang paling banyak digunakan oleh petani di Indonesia. Total penggunaan pupuk urea selama tahun 2018 yang tercatat pada Kementerian Perindustrian Indonesia adalah sejumlah 6,27 Juta ton atau mengalami peningkatan 5% dari tahun sebelumnya. Salah satu pabrik yang menghasilkan pupuk urea adalah PT Pupuk Kujang di Cikampek Jawa Barat. Tujuan dari studi ini adalah untuk mengidentifikasi dampak lingkungan potensial yang dihasilkan dari produksi 50 Kg pupuk urea. Metode yang digunakan dalam kajian dampak daur hidup (Life Cycle Impact Assessment) adalah CML-IA dengan 11(sebelas) parameter yaitu abiotic depletion dan abiotic depletion (fossil fuel), global warming (GWP100), ozone layer depletion, human toxicity, fresh water dan marine aquatic ecotoxicity, terrestrial ecotoxicity, photochemical oxidation, acidification, dan eutrophication,  Adapun batasan sistem menggunakancradle to grave yang memperhitungakn bahan dasar, proses produksi, transportasi dan pengelolaan limbah (karung bekas pupuk). Dari hasil analisa didapatkan bahwa proses produksi memberikan kontribusi dampak paling besar dibandingkan dengan pengelolaan limbah sisa karung (landfill). Proses produksi memberikan kontribusi terhadap dampak potensial lingkungan pada kisaran 99,14 – 100 persen dari total dampak yang di hasilkan. Sebagai tambahan bahwa dampak yang ditimbulkan pada proses di pabrik ammonia akan memberikan kontribusi lebih besar pada kisaran 22-37 persen lebih besar dibandingkan dengan proses di pabrik urea.Dari hasil analisa dengan memanfaatkan grafik jaringan (networking graph) pada program SimaPro juga menunjukkan bahwa environmental hotspotsdari daur hidup pupuk urea disebabkan oleh penggunaan gas alam, katalis molybdenum, penggunaan listrik dari Perusahaan Listrik Negara (PLN), penggunaan polypropylene dalam material karung, dan transportasi. Dengan mempertimbangan environmental hotspot maka tindakan perbaikan berkelanjutan perlu dilakukan baik berupa  audit energi maupun pengelolaan penggunaan katalis.

scholarly journals Case study of a water bioengineering construction site in Austria. Ecological aspects and application of an environmental life cycle assessment model

2021 ◽  
Author(s):  
M. von der Thannen ◽  
S. Hoerbinger ◽  
C. Muellebner ◽  
H. Biber ◽  
H. P. Rauch
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Demand ◽  
Assessment Model ◽  
Construction Site ◽  
Negative Effects ◽  
Environmental Life Cycle Assessment ◽  
The Impact ◽  
Soil And Water

AbstractRecently, applications of soil and water bioengineering constructions using living plants and supplementary materials have become increasingly popular. Besides technical effects, soil and water bioengineering has the advantage of additionally taking into consideration ecological values and the values of landscape aesthetics. When implementing soil and water bioengineering structures, suitable plants must be selected, and the structures must be given a dimension taking into account potential impact loads. A consideration of energy flows and the potential negative impact of construction in terms of energy and greenhouse gas balance has been neglected until now. The current study closes this gap of knowledge by introducing a method for detecting the possible negative effects of installing soil and water bioengineering measures. For this purpose, an environmental life cycle assessment model has been applied. The impact categories global warming potential and cumulative energy demand are used in this paper to describe the type of impacts which a bioengineering construction site causes. Additionally, the water bioengineering measure is contrasted with a conventional civil engineering structure. The results determine that the bioengineering alternative performs slightly better, in terms of energy demand and global warming potential, than the conventional measure. The most relevant factor is shown to be the impact of the running machines at the water bioengineering construction site. Finally, an integral ecological assessment model for applications of soil and water bioengineering structures should point out the potential negative effects caused during installation and, furthermore, integrate the assessment of potential positive effects due to the development of living plants in the use stage of the structures.

scholarly journals Exploring sustainability potentials in vineyards through LCA? Evidence from farming practices in South Africa

2021 ◽  
Author(s):  
V. Russo ◽  
A. E. Strever ◽  
H. J. Ponstein
Keyword(s):  
South Africa ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Human Health ◽  
South African ◽  
Wine Grape ◽  
Impact Categories ◽  
Farming Practices ◽  
Manual Labour ◽  
The Impact

Abstract Purpose Following the urgency to curb environmental impacts across all sectors globally, this is the first life cycle assessment of different wine grape farming practices suitable for commercial conventional production in South Africa, aiming at better understanding the potentials to reduce adverse effects on the environment and on human health. Methods An attributional life cycle assessment was conducted on eight different scenarios that reduce the inputs of herbicides and insecticides compared against a business as usual (BAU) scenario. We assess several impact categories based on ReCiPe, namely global warming potential, terrestrial acidification, freshwater eutrophication, terrestrial toxicity, freshwater toxicity, marine toxicity, human carcinogenic toxicity and human non-carcinogenic toxicity, human health and ecosystems. A water footprint assessment based on the AWARE method accounts for potential impacts within the watershed. Results and discussion Results show that in our impact assessment, more sustainable farming practices do not always outperform the BAU scenario, which relies on synthetic fertiliser and agrochemicals. As a main trend, most of the impact categories were dominated by energy requirements of wine grape production in an irrigated vineyard, namely the usage of electricity for irrigation pumps and diesel for agricultural machinery. The most favourable scenario across the impact categories provided a low diesel usage, strongly reduced herbicides and the absence of insecticides as it applied cover crops and an integrated pest management. Pesticides and heavy metals contained in agrochemicals are the main contributors to emissions to soil that affected the toxicity categories and impose a risk on human health, which is particularly relevant for the manual labour-intensive South African wine sector. However, we suggest that impacts of agrochemicals on human health and the environment are undervalued in the assessment. The 70% reduction of toxic agrochemicals such as Glyphosate and Paraquat and the 100% reduction of Chlorpyriphos in vineyards hardly affected the model results for human and ecotoxicity. Our concerns are magnified by the fact that manual labour plays a substantial role in South African vineyards, increasing the exposure of humans to these toxic chemicals at their workplace. Conclusions A more sustainable wine grape production is possible when shifting to integrated grape production practices that reduce the inputs of agrochemicals. Further, improved water and related electricity management through drip irrigation, deficit irrigation and photovoltaic-powered irrigation is recommendable, relieving stress on local water bodies, enhancing drought-preparedness planning and curbing CO2 emissions embodied in products.

scholarly journals Environmental impacts of wooden, plastic, and wood-polymer composite pallet: a life cycle assessment approach

2021 ◽  
Author(s):  
Md.Musharof Hussain Khan ◽  
Ivan Deviatkin ◽  
Jouni Havukainen ◽  
Mika Horttanainen
Keyword(s):  
Sensitivity Analysis ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Polymer Composite ◽  
Global Warming Potential ◽  
Consequential Life Cycle Assessment ◽  
Wood Polymer ◽  
Biogenic Carbon ◽  
Wood Polymer Composite

Abstract Purpose Waste recycling is one of the essential tools for the European Union’s transition towards a circular economy. One of the possibilities for recycling wood and plastic waste is to utilise it to produce composite product. This study analyses the environmental impacts of producing composite pallets made of wood and plastic waste from construction and demolition activities in Finland. It also compares these impacts with conventional wooden and plastic pallets made of virgin materials. Methods Two different life cycle assessment methods were used: attributional life cycle assessment and consequential life cycle assessment. In both of the life cycle assessment studies, 1000 trips were considered as the functional unit. Furthermore, end-of-life allocation formula such as 0:100 with a credit system had been used in this study. This study also used sensitivity analysis and normalisation calculation to determine the best performing pallet. Result and discussion In the attributional cradle-to-grave life cycle assessment, wood-polymer composite pallets had the lowest environmental impact in abiotic depletion potential (fossil), acidification potential, eutrophication potential, global warming potential (including biogenic carbon), global warming potential (including biogenic carbon) with indirect land-use change, and ozone depletion potential. In contrast, wooden pallets showed the lowest impact on global warming potential (excluding biogenic carbon). In the consequential life cycle assessment, wood-polymer composite pallets showed the best environmental impact in all impact categories. In both attributional and consequential life cycle assessments, plastic pallet had the maximum impact. The sensitivity analysis and normalisation calculation showed that wood-polymer composite pallets can be a better choice over plastic and wooden pallet. Conclusions The overall results of the pallets depends on the methodological approach of the LCA. However, it can be concluded that the wood-polymer composite pallet can be a better choice over the plastic pallet and, in most cases, over the wooden pallet. This study will be of use to the pallet industry and relevant stakeholders.

Sign in / Sign up

Export Citation Format

Share Document