Antileishmanial Activity of Carum Copticum Essential Oil Against Leishmania Major [MRHO/IR/75/ER]: An In Vitro Study

2019 ◽  
Author(s):  
Ali Fattahi Bafghi ◽  
Moneyreh Modares Mosadegh ◽  
Mehrdad Ghaemi ◽  
Seyed Hassan Hejazian
Keyword(s):  
Essential Oil ◽  
Leishmania Major ◽  
In Vitro Study ◽  
Antileishmanial Activity ◽  
Control Group ◽  
Synthetic Drugs ◽  
Carum Copticum ◽  
Antileishmanial Activities ◽  
Better Than

Background and Aims: Because of the toxicity and side-effects of synthetic drugs, there is a growing interest in biomedical plants. The aim of this study was to evaluate in vitro antileishmanial activity of Carum copticum essential oil against Leishmania (L) major. Materials and Methods: Nineteen experimental groups were designed to determine the effect of Carum copticum essential oil against L. major and compare it with Meglumine antimonite. Group 1 was the control group and included 200 µl of RPMI 1640 plus 2×105 cells/ml promastigotes. Groups 2-10 included the aforementioned substances plus 10 µl of 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2 and 3 µg/ml of Carum copticum essential oil respectively. Groups 11-19 were similar to groups 2-10 but Meglumine antimonite (0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2 and 3 µg/ml) was used instead of Carum copticum essential oil. All the experiments were repeated five times. After 8 hours, the antileishmanial activities of studied substances were determined. Results: Up to concentration of 0.5 µg/ml, no effect was observed with both substances. In comparison to control group, at 1 and 2 µg/ml, Meglumine antimonite had no effect on Leishmaniasis (p>0.05) while Carum copticum essential oil significantly decreased Leishmaniasis viability (p<0.05). Moreover, at 3 µg/ml, both compounds significantly decreased Leishmaniasis viability (p<0.05). However, Carum copticum essential oil had substantially better Antileishmanial activity than the other.   Conclusions: These results suggest that comparable concentrations, in vitro antileishmanial activity of Carum copticum essential oil is better than Meglumine antimonite.

scholarly journals In vitro study of the efficacy of Solanum nigrum against Leishmania major

F1000Research ◽  
2018 ◽  
Vol 7 ◽  
pp. 1329 ◽  
Author(s):  
Christine N. Mutoro ◽  
Johnson K. Kinyua ◽  
Joseph K. Ng'ang'a ◽  
Daniel W. Kariuki ◽  
Johnstone M. Ingonga ◽  
...  
Keyword(s):  
Leishmania Major ◽  
In Vitro Study ◽  
Vero Cells ◽  
Solanum Nigrum ◽  
Therapeutic Interventions ◽  
Phlebotomine Sandflies ◽  
High Concentrations ◽  
Antileishmanial Activities

Leishmania parasites (Kinetoplastida: Trypanosomatidae) are obligate intracellular parasites of macrophages that causes visceral and cutaneous leishmaniases. Currently, there is inadequate therapeutic interventions to manage this endemic tropical disease, transmitted mainly by phlebotomine sandflies hence there is need to develop affordable and effective therapeutic measures. This study determined the in vitro efficacy of Solanum nigrum methanolic and aqueous plant extracts on Leishmania major parasites.  Cytotoxic effects of the extracts were determined using vero cells and reported as percentage viability of the cells. The promastigote parasites of Leishmania major were cultured and grown for 3 days in different concentrations of extracts to determine the MIC and IC50 values. The in vitro antileishmanial efficacy was done on macrophages infected with L. major amastigote parasites and then treated with extracts in varying concentrations. The study revealed that all the test extracts had lower toxicity than control drugs, pentostam (IC50= 0.0 92 mg/ml) and amphotericin B (IC50=0.049 mg/ml).  The extracts tended to show a dose dependent cytotoxic effect which corresponded to high vero cells viability as their concentration increased.  Methanolic extract of S. nigrum from Kisii seemed to be more efficacious in vitro since it knocked out the promastigotes at a lower MIC level (0.5 mg/ml) when compared to all other extracts whose effective MIC level was ≥ 1 mg/ml. High concentrations of the test extracts and control drugs resulted to low infectivity and multiplication of L. major amastigotes. Findings from this study demonstrate that S. nigrum extracts have potential antileishmanial activities however; further investigation needs to be done on pure compound isolation, in vivo assays and clinical trials so as to use the promising compounds as effective antileishmanial agents.

Antileishmanial activity of conventional and solid lipid nanoparticles of Amphotericin B on Leishmania major

2019 ◽  
Vol 19 ◽  
Author(s):  
Shahrzad Soltani ◽  
Hoda Mojiri -Forushani ◽  
Sheyda Soltani ◽  
Mehdi Sagha Kahvaz ◽  
Masoud Foroutan
Keyword(s):  
Amphotericin B ◽  
Solid Lipid Nanoparticles ◽  
Leishmania Major ◽  
Colorimetric Assay ◽  
Lipid Nanoparticles ◽  
Antileishmanial Activity ◽  
Control Group ◽  
Dependent Manner ◽  
Solid Lipid

Background: Obligate intracellular parasites of Leishmania genus belong to family Trypanosomatidae and more than twenty species causes this neglected vector-borne infection throughout the globe. The current study was aimed to assess the antileishmanial activity of Amphotericin B (AmB) and AmB formulated into solid lipid nanoparticles (SLNs) in vitro and in vivo. Materials and methods: In the present research, microemulsification and high shear homogenization methods were used to prepare SLNs. Leishmania major (L. major) promastigotes were cultured in RPMI 1640 and incubated for three time points of 24, 48 and 72 h at 25±1°C. Then, the MTT colorimetric assay was employed for obtaining of 50% inhibitory concentration (IC50). Finally, we evaluated the efficacy of AmB and AmB-SLN for the treatment of experimental cutaneous leishmaniasis (CL) in BALB/c mice. Results: The average diameter sizes of prepared AmB-SLN were <180 nm and monodisperse preparations with polydispersity index 0.21±0.29. The antileishmanial activity of AmB and AmB-SLN revealed a dose and time-dependent manner in vitro. The IC50 values of AmB (38.18±1.33, 25.06±2.00, and 13.87±0.61 μg/ml) and AmB-SLN (0.40±0.02, 0.26±0.02, and 0.14±0.01 μg/ml) were estimated after 24, 48 and 72 hours, respectively. In all BALB/c treatment groups, the diameter of lesions were significantly smaller than the control group. Conclusion: Discovery of new effective drugs based on nanocarriers, such as SLN, is practical and opens a new window for the treatment of CL. More studies are needed in the future.

Reverse torque values of abutment screws after dynamic loading: The effects of sealant agents and the taper of conical connections

2020 ◽  
Author(s):  
Arda Ozdiler ◽  
suleyman dayan ◽  
Burc Gencel ◽  
Gulbahar Isık-Ozkol
Keyword(s):  
Dynamic Loading ◽  
Antibacterial Agent ◽  
In Vitro Study ◽  
Control Group ◽  
Silicone Sealant ◽  
Reverse Torque ◽  
The Stability ◽  
Torque Values ◽  
Chlorhexidine Gel

This in vitro study evaluated the influence of taper angles on the internal conical connections of implant systems and of the application of chlorhexidine gel as an antibacterial agent or a polyvinyl siloxane (PVS) sealant on the reverse torque values of abutment screws after dynamic loading. The current study tested four implant systems with different taper angles (5.4°, 12°, 45°, and 60°). Specimens were divided into three groups: control (neither chlorhexidine gel filled nor silicone sealed), 2% chlorhexidine gel-filled or silicone-sealed group, and group subjected to a dynamic load of 50 N at 1 Hz for 500,000 cycles prior to reverse torque measurements. Quantitative positive correlation was observed between the taper angle degree and the percentage of tightening torque loss. However, this correlation was significant only for the 60° connection groups except in the group in which a sealant was applied ( p = 0.013 for the control group, p = 0.007 for the chlorhexidine group). Percentages of decrease in the torque values of the specimens with silicone sealant application were significantly higher compared with both the control and chlorhexidine groups ( p = 0.001, p = 0.002, p = 0.001, and p = 0.002, respectively, according to the increasing taper angles); the percentage of decrease in torque values due to chlorhexidine application was statistically insignificant when compared with the control group. The application of gel-form chlorhexidine as an antibacterial agent does not significantly affect the stability of the implant–abutment connection under dynamic loads. PVS sealants may cause screw loosening under functional loads.

Comparative Study to Evaluate the Surface Detail Reproduction of Dental Stone after Immersion in Various Different Disinfectant Solutions, Under Stereomicroscope 10 X Magnification –An In-Vitro Study

2017 ◽  
Vol 9 (3) ◽  
Author(s):  
Rathika Rai ◽  
M. A. Easwaran ◽  
K. T. Dhivya
Keyword(s):  
Sodium Hypochlorite ◽  
In Vitro Study ◽  
Control Group ◽  
Immersion Method ◽  
Significant Difference ◽  
Surface Irregularities ◽  
Disinfectant Solution ◽  
Surface Detail ◽  
Group B

Aim: To evaluate the surface detail reproduction of dental stone this is immersed in different disinfectant solution and studied under stereomicroscope. Methodology: Total number of 30 specimens of dental stone (Type III) were made with measurements of 1.5cm diameter and 1cm height .This samples are divided in to 3 groups group A,B,C. were A is immersed in Distilled water which was taken as control group ;B is immersed in 2% Glutaraldehyde and C is immersed in 5%sodium hypochlorite. Each specimen were immersed in the disinfectant solution for 15 minutes and dried under room temperature for 24 hrs. After 24 hrs each specimens are studied under stereomicroscope for surface details. Result: The results showed no significant difference in the surface irregularities and porosities for a group 1 and group 2 except group 3 which showed significant increase in the porosities, surface irregularities and erosions after disinfection with 5% NaHOCl by immersion method. Conclusion: The surface detail reproduction capacity of die stone was adversely affected when 5% Sodium hypochlorite was used as disinfectant solution when compare d to control group and 2% Glutaraldehyde

Evaluating the Effect of Cinnarizine on Promastigotes and Amastigotes forms of Leishmania major

2020 ◽  
Vol 20 (4) ◽  
pp. 550-555 ◽  
Author(s):  
Lima Asgharpour Sarouey ◽  
Parvaneh Rahimi-Moghaddam ◽  
Fatemeh Tabatabaie ◽  
Khadijeh Khanaliha
Keyword(s):  
Flow Cytometry ◽  
Cutaneous Leishmaniasis ◽  
Leishmania Major ◽  
Inhibitory Effect ◽  
Control Group ◽  
Secondary Infections ◽  
Ic50 Values ◽  
J774 Cells ◽  
Mtt Assays

: As an important global disease, cutaneous leishmaniasis is associated with complications such as secondary infections and atrophic scars. The first line treatment with antimonials is expensive and reported to have serious side effects and enhance resistance development. The main objective of this study was to evaluate the effect of Cinnarizine on standard strains of Leishmania major because of paucity of information on this subject. Methods: In this experimental study, four concentrations of the drug (5, 10, 15 and 20 μg/ml) were added to Leishmania major cultures at 24, 48 and 72 hours intervals. MTT assays were performed to determine parasite viability and drug toxicity. Leishmania major promastigotes were augmented to the in vitro cultured macrophages (J774 cells) and then incubated for 72 hours. Half maximal inhibitory concentration (IC50) was ascertained by counting parasites. The inhibitory effect of the drug was compared with that of Glucantime. Flow-cytometry was performed to investigate apoptosis. Each test was repeated thrice. Results: The IC50 values of Cinnarizine after 72 hours were calculated to be 34.76 μg/ml and 23.73 μg/ml for promastigotes and amastigotes, respectively. The results of MTT assays showed 48 % promastigote viability after 72 hour-exposure to Cinnarizine at 20 μg/ml concentration. Programmed cell death in promastigote- and amastigote-infected macrophages was quantified to be 13.66 % and 98.7 %, respectively. Flow- cytometry analysis indicated that Cinnarizine induced early and late apoptosis in parasites. All treatments produced results which differed significantly from control group (P<0.05). Conclusion: Cinnarizine showed low toxicity with anti-leishmanial and apoptosis effects on both promastigote and intracellular amastigote forms. Therefore, we may suggest further assessment on animal models of this drug as candidates for cutaneous leishmaniasis therapy.

scholarly journals Pomegranate Peel Extract Is a Potential Alternative Therapeutic for Giardiasis

Antibiotics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 705
Author(s):  
Asmaa M. El-Kady ◽  
Iman A. M. Abdel-Rahman ◽  
Samer S. Fouad ◽  
Khaled S. Allemailem ◽  
Taghrid Istivan ◽  
...  
Keyword(s):  
Diarrheal Disease ◽  
Apoptotic Cell ◽  
In Vitro Study ◽  
Ethanolic Extract ◽  
Control Group ◽  
Pomegranate Peel ◽  
Pomegranate Peel Extract ◽  
Multiple Drugs ◽  
Peel Extract

Giardiasis is a major diarrheal disease affecting approximately 2.5 million children annually in developing countries. Several studies have reported the resistance of Giardia lamblia (G. lamblia) to multiple drugs. Therefore, identifying an effective drug for giardiasis is a necessity. This study examined the antiparasitic effect of Punica granatum (pomegranate) and evaluated its therapeutic efficacy in rats infected with G. lamblia. In vitro study showed high efficacy of pomegranate peel ethanolic extract in killing G. lamblia cysts as demonstrated by eosin vital staining. We showed that treating infected rats with pomegranate extract resulted in a marked reduction in the mean number of G. lamblia cysts and trophozoites in feces and intestine respectively. Interestingly, the number of G. lamblia trophozoites and cysts were significantly lower in the pomegranate extract-treated group compared to the metronidazole-positive control group. Moreover, pomegranate extract treatment significantly induced nitric oxide (NO) and reduced serum IL-6 and TNF-α, compared to infected untreated rats. Histological and scanning electron microscopy (SEM) examination of the jejunum and duodenum of pomegranate extract-treated animals confirmed the antiparasitic effect of the extract, and demonstrated the restoration of villi structure with reduction of villi atrophy, decreased infiltration of lymphocytes, and protection of intestinal cells from apoptotic cell death. In conclusion, our data show that the pomegranate peel extract is effective in controlling G. lamblia infections, which suggests that it could be a viable treatment option for giardiasis.

scholarly journals Potential of different fluoride gels to prevent erosive tooth wear caused by gastroesophageal reflux

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Philipp Körner ◽  
Luca Georgis ◽  
Daniel B. Wiedemeier ◽  
Thomas Attin ◽  
Florian J. Wegehaupt
Keyword(s):  
Gastroesophageal Reflux ◽  
Artificial Saliva ◽  
In Vitro Study ◽  
Tooth Wear ◽  
Control Group ◽  
Erosive Tooth Wear ◽  
Custom Made ◽  
Post Hoc ◽  
Bovine Enamel

Abstract Background This in-vitro-study aimed to evaluate the potential of different fluoride gels to prevent gastroesophageal reflux induced erosive tooth wear. Methods Surface baseline profiles of a total of 50 bovine enamel specimens [randomly assigned to five groups (G1–5)] were recorded. All specimens were positioned in a custom made artificial oral cavity and perfused with artificial saliva (0.5 ml/min). Reflux was simulated 11 times a day during 12 h by adding HCl (pH 3.0) for 30 s (flow rate 2 ml/min). During the remaining 12 h (overnight), specimens were stored in artificial saliva and brushed twice a day (morning and evening) with a toothbrush and toothpaste slurry (15 brushing strokes). While specimens in the control group (G1) did not receive any further treatment, specimens in G2–5 were coated with different fluoride gels [Elmex Gelée (G2); Paro Amin Fluor Gelée (G3); Paro Fluor Gelée Natriumfluorid (G4); Sensodyne ProSchmelz Fluorid Gelée (G5)] in the evening for 30 s. After 20 days, surface profiles were recorded again and enamel loss was determined by comparing them with the baseline profiles. The results were statistically analysed using one-way analysis of variance (ANOVA) followed by Tukey`s HSD post-hoc test. Results The overall highest mean wear of enamel (9.88 ± 1.73 µm) was observed in the control group (G1), where no fluoride gel was applied. It was significantly higher (p < 0.001) compared to all other groups. G2 (5.03 ± 1.43 µm), G3 (5.47 ± 0.63 µm, p = 0.918) and G4 (5.14 ± 0.82 µm, p > 0.999) showed the overall best protection from hydrochloric acid induced erosion. Enamel wear in G5 (6.64 ± 0.86 µm) was significantly higher compared to G2 (p = 0.028) and G4 (p = 0.047). Conclusions After 20 days of daily application, all investigated fluoride gels are able to significantly reduce gastroesophageal reflux induced loss of enamel.

scholarly journals Time Efficiency of Digitally and Conventionally Produced Single-Unit Restorations

2021 ◽  
Vol 9 (6) ◽  
pp. 62
Author(s):  
Sofia Stromeyer ◽  
Daniel Wiedemeier ◽  
Albert Mehl ◽  
Andreas Ender
Keyword(s):  
Single Unit ◽  
Operating Time ◽  
In Vitro Study ◽  
Working Time ◽  
Control Group ◽  
Similar Amount ◽  
Scan Design ◽  
Time Efficiency ◽  
Dental Professional

The purpose of this in vitro study was to compare the time efficiency of digital chairside and labside workflows with a conventional workflow for single-unit restorations. The time efficiency in this specific sense was defined as the time, which has to be spent in a dental office by a dental professional performing the relevant steps. A model with interchangeable teeth on position 36 was created. These teeth were differently prepared, responding to several clinical situations to perform single-unit restorations. Different manufacturing techniques were used: For the digital workflows, CEREC Omnicam (CER) and Trios 3 (TN/TI) were used. The conventional workflow, using a dual-arch tray impression technique, served as the control group. For the labside workflow (_L) and the conventional impression procedure (CO), the time necessary for the impressions and temporary restorations was recorded and served as operating time. The chairside workflow time was divided by the time for the entire workflow (_C) including scan, design, milling and finishing the milled restoration, and in the actual working time (_CW) leaving out the chairside milling of the restoration. Labside workflow time ranged from 9 min 27 s (CER_L) to 12 min 41 s (TI_L). Entire chairside time ranged from 43 min 35 s (CER_C) to 58 min 43 s (TI_C). Pure chairside working time ranged from 15 min 21 s (CER_CW) to 23 min 17 s (TI_CW). Conventional workflow time was 10 min 39 s (CO) on average. The digital labside workflow and the conventional workflow require a similar amount of time. The digital chairside workflow is more time consuming.

Sign in / Sign up

Export Citation Format

Share Document