INFLUENCE OF PARAMETERS OF THE ROUGHLY DISPERSED DUST GAS MIXTURES AT THE TIME OF THEIR BURN-OUT IN MINE WORKINGS OF COAL MINES

Ugol ◽  
2018 ◽  
pp. 44-49 ◽  
Author(s):  
S.V. Cherdantsev ◽  
◽  
Kh.U. Lee ◽  
Yu.M. Filatov ◽  
P.A. Shlapakov ◽  
...  
Author(s):  
O. V. Skopintseva ◽  
S. V. Balovtsev

The results of a study of the aerodynamic aging of mine workings are presented. It is established that the local workings located in the zone of active manifestation of rock pressure are most deformed. The average rate of increase in their resistance reaches 0.0112 N×s2 / m9×yr, and the degree of increase in their resistivities over 4-9 years of existence reaches 7-8 times. The rate of aging of the mine workings is much lower than that of the local workings, averaging 0.0014 N×s2/m9×year for the inclined workings on average over the entire period of their existence, and 0.0009 N×s2/m9×year for horizontal ones. The degree of increase in the resistivity of capital workings for 12-25 years of their existence reaches 3 times. The workings were ranked by relative aerological risk indicator Rac by aerodynamic aging factor. The calculations showed that the average value of the relative aerological risk indicator for the aerodynamic aging factor of the Rac mine workings for the local haul drifts was 0.541; for precinct ventilation drifts - 0.842; for capital inclined workings - 0.172; for capital horizontal workings - 0.101. When assessing the risk of gassing of workings, it is necessary to take into account data on the aerodynamic aging of mine workings.


2020 ◽  
Vol 18 (1) ◽  
pp. 50-64
Author(s):  
O. Yu. Lukashov ◽  
D. A. Kostromin

The article describes the technology of discretization of the computational domain for solving unsteady gas-dynamic problems in the field of industrial safety of coal mines. The most important of this problem is the calculation of the parameters of air shock waves and the affected areas during methane explosions in mine workings. The technology allows you to automate the construction of a differential grid for a spatial network of mine workings, taking into account the features of the mines topology and simulated processes. At the same time, the grid can consist of cells of various dimensions – one-dimensional, two-dimensional and three-dimensional. The aim of the work is to create the basics for the development of scientific research of gas-dynamic processes in gas explosions in mining workings by taking into account new factors – means of explosion protection, the participation of coal dust, etc. The tasks of the work include: developing an addressing system for identification and quick access to arbitrary cells of the difference grid; the construction of unambiguous spatial relationships between the corresponding faces of the cells during their splitting and combining; testing of the technology on the mine network of a real mine. A new approach in the work is the possibility of automating the partition of the computational domain with the simultaneous use of cells of all three dimensions. The article contains details of the implementation of technology. The article shows the results of splitting the network of mine workings in a real coal mine, the results of calculations using the obtained grid and the convergence of the results to a solution when reducing the step as a result of subsampling the computational domain with different depth of splitting.


2011 ◽  
Vol 57 (3) ◽  
pp. 56-62
Author(s):  
Jana Magnusková ◽  
Simona Matušková ◽  
Jana Bartoňová ◽  
Zdeněk Pavelek

Abstract In current mining practice, the most often used methods of cooling spatially sealed fire areas are: natural cooling, cooling by nitrogen, cooling by water and inert foam and cooling by combustion product recirculation. The technology of cooling with nitrogen represents two variants - the use of liquid nitrogen or nitrogen gas in the area of closed mine workings. From a technical and safety points of view the application of liquid nitrogen is today considered unsatisfactory, while the use of nitrogen gas seams to be highly safe technology for cooling explosion-proof sealed fire areas. Another possibility for cooling fire areas in deep coal mines is so-called natural cooling, where economical costs are indeed zero, but comparing to cooling processes induced by the application of cooling technologies a longer time period necessary for the natural refrigeration of fire areas causes financial losses.


Author(s):  
I Sheka ◽  
Ye Tsivka

Purpose. To analyze composite materials and prospects of their use as fastening materials for mining of coal mines.Perform a comparative analysis of the physical and mechanical properties of the innovative material carbon fiber and metallic materials, as well as compare their features. To determine the possibility of using carbon fiber as a fastening material for mining of coal mines. Research methodology. The generalization of physical and mechanical properties of carbon fiber on the basis of its analysis is performed. The features of mechanical properties of carbon fiber, steel and aluminum are compared, which showed that this composite material has the best physical and mechanical properties and it is expedient to use it in the fastening elements of mine workings. Research results. The areas of use of composite materials in industry are analyzed and generalized, and it is concluded that it is better to use carbon fiber as a fastening material for coal mine workings. A comparative analysis of the physical and mechanical properties of carbon fiber and steel is performed, which shows that this composite material has identical (and sometimes even better) properties as metallic materials. The advantages and disadvantages of carbon fiber as a fastening material for mining of coal mines are estimated. It is specified that the restraining factor, today, is the cost of carbon fiber, and later their price will decrease and demand will increase. It is concluded that when using this composite material in the fasteners of mine workings, it is possible to increase the pace of their implementation, reduce the complexity of the work performed and improve working conditions while facilitating the design. Scientific novelty. It is established that carbon fiber as a composite material can be used in the fastening elements of the preparatory workings of coal mines. Practical value. According to the results of the analysis, it is established that carbon plastics can be used in the fastening elements of mine workings, which will promote the development of underground coal mining.


2019 ◽  
Vol 105 ◽  
pp. 01019
Author(s):  
Oleg Tokarev ◽  
Valery Popov ◽  
Anatoly Golik ◽  
Vera Zubareva

In the article on the basis of the analysis it is proved that the currently used technical means and methods of control of the mine atmosphere in coal mines during the conduct of rescue operations it is impossible to obtain complete and timely information about the gas situation in the system of mine workings of the emergency site and adjacent potentially hazardous areas. The article describes an Autonomous small-sized multichannel gas control system of a new technical level, protected by a patent for a utility model developed by LLC “Research and production center for automation of safety” (Moscow) and a Branch of “Prokopevsky paramilitary mine rescue unit” FSUE “VGSCH” EMERCOM of Russia (Prokopyevsk) in order to eliminate the noted problem of monitoring the mine atmosphere in the liquidation of the accident.


2021 ◽  
Vol 8 (1) ◽  
pp. 18-25
Author(s):  
Oleg Ulytsky ◽  
Kateryna Boiko

The article highlights the aspects of RSE technologies adaptation during the forward hydrogeological predictions development and for the purposes of the surface flooding zones spreading estimation within coal-mines fields, being flooded. Previously developed numerical geofiltration model allows to return filtration settings of the massif of rocks, that was broken due to coal extraction, and to identify the influence features of the mine workings flooding regime on the general hydrodynamic settings around the flooded mines. As a result of geofiltration modeling the forecast cartographic scheme of groundwater table level position at the final stage of mine workings flooding was obtained. To take into account the influence of surface subsidence over the mine workings on flooding zones distribution, the values of maximum possible vertical surface displacements over the mine workings contours were calculated, based on geological and surveying data. The relief mathematical model was developed with given expected vertical deformations using the GIS-techniques and the original DEM of the territory.The result of the radar satellites images processing is a cartographic model that demonstrates the intensity of uplift movements of the earth surface. Areas of distribution of large-amplitude movements (10-20 mm/year) were determines. As a result, an updated scheme of the forecasted flooded zones was developed.


2021 ◽  
Vol 15 (3) ◽  
pp. 7-15
Author(s):  
Mykhailo Barabash ◽  
Ildar Salieiev ◽  
Hennadii Symanovych

Purpose.Development of a comprehensive methodology for assessing the state of mine workings based on the analysis of their contour displacement patterns when solving the problem of minimizing the risks during the closure of coal mines in Ukraine. Methods. Based on an integrated analysis of international and domestic trends when assessing the consequences of mine closure, the main provisions of using the method of instrumental mine observations have been substantiated. When solving the problem, the approaches of regulatory documents are taken into account to identify the geomechanical situation according to two conditions: the structure and strength properties of the lithotypes in the adjacent coal-bearing stratum and the peculiarities of the rheological processes manifestation during the development of its displacements. Findings. The geomechanical, technological and hydrogeological factors have been distinguished that are required to take into account when closing the coal mines. Fundamental methodological provisions have been substantiated for the most reliable assessment of the mine workings state, taking into account the long period of their operation. A criterion for making a decision on the decommissioning of mine workings or their further maintenance is presented. Originality.A series of generalizing dependences of the mine working contour displacement development has been obtained, which can be divided into four main groups according to the criteria of the structural and strength properties of lithotypes in the adjacent mass, as well as the type of their rheological manifestations: decaying and persistent deformation creep. For each group, using the methods of correlation-dispersive analysis, empirical formulas have been determined for calculating the convergence of the roof and bottom of mine workings, as well as their sides, depending on the geomechanical criterion H/R of the maintenance conditions and the duration t of this period. Practical implications.The obtained correlation ratios make it possible to predict the residual section of mine working at any time of its maintenance. They are a geomechanical component of its operational state assessment. The result of this research is the development of a new methodology for assessing the mine working state according to the patterns for predicting its contour displacement.


2021 ◽  
Vol 330 ◽  
pp. 04001
Author(s):  
Oleg Tailakov ◽  
Evgeny Saltymakov ◽  
Sergey Kolesnichenko

Effective lengths measurements of boreholes drilled by rotary drilling rigs from mine workings based on the echolocation principle, was implemented. Recommendations for drilling and effective use of geophysical equipment for monitoring the degas boreholes conditions in coal mines were substantiated and formulated.


2014 ◽  
Vol 59 (3) ◽  
pp. 655-675 ◽  
Author(s):  
Nikodem Szlązak ◽  
Marek Borowski ◽  
Dariusz Obracaj ◽  
Justyna Swolkień ◽  
Marek Korzec

Abstract Methane drainage is used in Polish coal mines in order to reduce mine methane emissions as well as to keep methane concentration in mine workings at safe levels. This article describes methods of methane drainage during mining used in Polish coal mines. The first method involves drilling boreholes from tailgate roadway to an unstressed zone in roof or floor layers of a mined seam. It is the main method used in Polish mining, where both the location of drilled boreholes as well as their parameters are dependent on mining and ventilation systems of longwalls. The second method is based on drilling overlying drainage galleries in seams situated under or over the mined seam. This article compares these methods with regard to their effectiveness under mining conditions in Polish mines. High effectiveness of methane drainage of longwalls with different ventilation and methane drainage systems has been proven. The highest effectiveness of methane drainage has been observed for the system with overlying drainage gallery and with the parallel tailgate roadways. In case of classic U ventilation system of longwall panel, boreholes drilled from the tailgate roadway behind the longwall front are lost.


2015 ◽  
Vol 60 (2) ◽  
pp. 455-475 ◽  
Author(s):  
Przemysław Bukowski

AbstractWater hazard has been accompanying underground mining since the first mines were built. The hazard is particularly often in the areas of mines situated in hydrogeologically outcropped part of USCB and in water rich formations of Cracow Sandstone Series. To plan properly mining actions and technical measures at each stage of life of a mine it is necessary to evaluate hydrogeological and geomechanical conditions and their changes. The conditions determine formation, occurrence and volume of the most serious sources of water hazard. Symptoms obtained in geomechanical tests and observations of forming and dewatering reservoirs of underground water, show that it is necessary to update constantly evaluation and classification of sources of water hazard or the state of water hazard in the coal mines of USCB.Development of underground mining in 1945-1990, which resulted in a quick increase in production, determined development and the range of influence of mining operations on the rock mass and the influence on the state of drainage and saturation of the rock mass. The result of the changes was an apparent influence on the changes in the state and shaping water hazards in the course of time. Since 1989 economic conditions of functioning of mines have been tightly associated with the conditions and rules of market economy. As a result of each of the so-called restructuring of mining activity a certain number of mining companies was closed, merged or split. The consequence is that in the vicinity of active mines and prospective mining areas, more and more often there are partially or completely flooded abandoned coal mines. Flooded coal mines have changed and still do hydrogeological conditions of their surrounding and force active mining companies to introduce changes in mining activities they are planning and conducting. The current state of flooding mine workings, is a result of realizing previous plans of restructuring mining industry, and all the changes of the state require hydrogeological documentation and evaluation of water hazard.In the today’s conditions of functioning of mining industry, sources of water hazards like water reservoirs in goafs, are one of six main types of sources of hazard, and at the same time the biggest problem and the most serious threat for active mine workings. As the hydrodynamic conditions in the closed areas stabilise and the water piles up close to the surface, an increase in the influence of reservoirs on the state of environmental and public hazard (subsidence, overflowing, flooding, pollution of water in the aquifers located in the overburden and surface water).As there is a qualitative change in the directions, causes and sources of water hazard, it shall be expected that the changes will tend to increase the threat level from the closed mines. Hence since 2000 the Central Mining Institute has been focused mainly on methodology research, both laboratory ones of various scale of observation referring to the properties of rocks and rock debris, and in situ ones and forecasting ones accompanied by proposed multidirectional applications of the developed methods in mining and environmental practice. The effect of the works was developing and patenting a few new methods. The effects of works which have been conducted in the last several years were proposed changes in defining water hazard, classifying the hazard and its sources. Classifications of underground water reservoirs, deposits located in the vicinity of reservoirs in closed coal mines and water safety of shafts were proposed. The devised test and evaluation methods have wide practical applications in evaluating water hazard and limiting the hazard, as well as estimating volume of water in reservoirs of closed mines and estimating energy of the water and free methane deposit in the abandoned goafs and mine workings. Their application in hydrogeology plays an important role in estimating volume of water in aquifers built of porous hard rocks. It is also important and applicable in environmental engineering to evaluate volume of water, estimating conditions of its accumulation and flow, and migration of pollution mainly within surface water reservoirs reclaimed with waste rock.


Sign in / Sign up

Export Citation Format

Share Document