scholarly journals Measurement of rail vehicles exhaust emissions

2021 ◽  
Author(s):  
Michalina Kamińska ◽  
Daniel Kołodziejek ◽  
Natalia Szymlet ◽  
Paweł Fuć ◽  
Rafał Grzeszczyk

The exhaust emission standards in force in various parts of the world for off-road vehicles are becoming more and more stringent. Therefore, research on the compounds of harmful exhaust fumes emitted by vehicles of this category is constantly being researched and activities aimed at limiting them are constantly being carried out. The basic problem in terms of measuring exhaust emissions is the approval tests of traction vehicles, which are carried out on engine dynamome-ters. Therefore, it is impossible to obtain reliable results concerning their actual impact on the natural environment. It is therefore advisable to carry out the tests in real operation conditions, as is the case for road vehicles for which RDE (Real Driving Emissions) tests are carried out. The latest Stage V emission standards push for the introduction of this type of test, but no limit values for toxic exhaust gases have been established and no test guidelines have been defined for as-sessing actual emissions. This article describes the issues related to the legislative guidelines for non-road vehicles in force in Europe, as well as the measurement tools used, such as mobile equipment for measuring emissions of PEMS (Portable Emissions Measurement Systems) and newly developed emission gates.

2019 ◽  
Vol 35 (4(102)) ◽  
pp. 43-109
Author(s):  
Jadwiga Szymańska ◽  
Barbara Frydrych ◽  
Elżbieta Bruchajzer

Exhaust emissions from diesel engines (SESD) are multi-component mixtures of chemical compounds resulting from incomplete combustion of fuel and engine oil. The toxic effect of exhaust gases is associated with the presence of toxic and carcinogenic compounds in them. GIS reports in 2019 that the number of employees employed in conditions constituting 0.1– 0.5 of MAC-TWA (applicable for exhaust emissions from diesel engines) in 2017 and in 2018 was 1071 and 986, respectively, while in conditions 0 , 5–1 MAC-TWA were 26 and 46, respectively. In the list of occupational diseases in the years 2013–2017, two cancers were registered: one bladder and one larynx (exposure to PAHs present in exhaust gases). In the clinical picture of acute exhaust poisoning, irritant effects on the mucous membranes of the eyes and upper respiratory tract predominate. Eye conjunctival irritation is considered to be one of the most sensitive indicators of exhaust gas exposure. Chronic poisoning is usually seen in people who have been exposed to work for at least several years. Functional and morphological changes in the respiratory system dominate. Prolonged exposure to high concentrations of exhaust gases has resulted in: accumulation of solid particles in macrophages, changes in lung cells, fibrosis and epithelial metaplasia. Exposure to exhaust fumes can exacerbate the symptoms of existing diseases, e.g. asthma, allergies. The results of epidemiological studies indicate a relationship between occupational exposure to exhaust gas emitted from diesel engines and the increased incidence of certain groups of cancers, mainly lung cancer and bladder cancer. Studies conducted on laboratory animals have shown that exposure to exhaust fumes emitted from diesel engines caused disorders of the respiratory, circulatory, nervous and immune systems. Mutagenicity tests showed positive responses in several Salmonella strains. Animal studies (prenatal and adult exposure) suggest that exposure to exhaust gas may affect male fertility. Annex III of Directive (EU) 2019/130 of the European Parliament and of the Council contains occupational exposure limit values amending Directive 2004/37 / EC. For exhaust emissions from diesel engines for an 8-hour working day, this value was set at 0.05 mg/m3 (measured as elemental carbon). After 1–2 hours of human inhalation exposure to concentrations of 75–225 µg/m3 (as elemental carbon), a decrease in respiratory function parameters and the occurrence of inflammatory changes in the lungs were observed. There is insufficient data on occupational exposure to exhaust emissions from new generation diesel engines. Therefore, it was proposed to adopt as the MAC-TWA value for exhaust emissions from diesel engines a concentration of 0.05 mg/m3 (measured as elemental carbon) included in the Directive 2019/130, without setting STEL and TLV-C. This article discusses the problems of occupational safety and health, which are covered by health sciences and environmental engineering.


2021 ◽  
Vol 11 (1) ◽  
pp. 356-364
Author(s):  
Maciej Gis ◽  
Jacek Pielecha ◽  
Wojciech Gis

Abstract The article compares the exhaust emissions in road conditions of city buses: LNG and Diesel. Both buses met the Euro VI exhaust emission norm. The current strong drive to diversify fuels in Poland and the creation of a large gas port in Świnoujście for LNG imports creates an excellent opportunity to use this fuel, also in road transport. Therefore, the attempt to identify the emission in operation, in first place possible applications, i.e. an LNG bus, comparatively with the emission of a Diesel bus. The operational research carried out concerned such a bus and has not yet been carried out in the country, hence their innovation, also methodological. The conducted research, in particular, was aimed at verifying differences in exhaust emissions of carbon dioxide and nitrogen oxides. The study was carried out on one urban bus route performing trips on consecutive days in similar environmental conditions. The performed tests were not strictly type approval tests but only used for comparative purposes. Hence, it was necessary to determine the compliance factor for the relevant exhaust gas substances, with the use of an evaluation algorithm based on measurement windows. Based on these results, the assumption regarding compliance with the emission requirements for the tested buses was verified in real traffic conditions. The exhaust emission values (emission indicators) determined in this way did not exceed the permissible emission limit values for carbon monoxide, while for nitrogen oxides and non-methane hydrocarbons certain exceedances were found.


2011 ◽  
Vol 71-78 ◽  
pp. 5084-5088
Author(s):  
Chao Ding ◽  
Xu Zhang

On the basis of a long highway tunnel, this paper has worked out different fresh air demands in tunnel under various conditions—different driving speed; renewal of vehicles; different combination of motor vehicle emission standards; emission of NOx considered or not considered. From three aspects (calculation methodology, exhaust emission, design concentrations of pollutants) this paper has made a comparative analysis between the results calculated according to JTJ026.1-1999 and PIARC2007. The research findings show that there still exists a huge gap between JTJ026.1-1999 and PIARC2007. Domestic specifications should be adjusted and improved in terms of exhaust emissions and design concentrations of pollutants, so as to achieve the purpose of determining reasonable fresh air demand.


Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2340
Author(s):  
Kinga Skobiej ◽  
Jacek Pielecha

Transportation, as one of the most growing industries, is problematic due to environmental pollution. A solution to reduce the environmental burden is stricter emission standards and homologation tests that correspond to the actual conditions of vehicle use. Another solution is the widespread introduction of hybrid vehicles—especially the plug-in type. Due to exhaust emission tests in RDE (real driving emissions) tests, it is possible to determine the real ecological aspects of these vehicles. The authors of this paper used RDE testing of the exhaust emissions of plug-in hybrid vehicles and on this basis evaluated various hybrid vehicles from an ecological point of view. An innovative solution proposed by the authors is to define classes of plug-in hybrid vehicles (classes from A to C) due to exhaust emissions. An innovative way is to determine the extreme results of exhaust gas emission within the range of acceptable scatter of the obtained results. By valuating vehicles, it will be possible in the future to determine the guidelines useful in designing more environmentally friendly power units in plug-in hybrid vehicles.


2020 ◽  
Vol 182 (3) ◽  
pp. 54-58
Author(s):  
Andrzej Ziółkowski ◽  
Paweł Fuć ◽  
Piotr Lijewski ◽  
Łukasz Rymaniak ◽  
Paweł Daszkiewicz ◽  
...  

Road transport holds for the largest share in the freight transport sector in Europe. This work is carried out by heavy vehicles of various types. It is assumed that, in principle, transport should take place on the main road connections, such as motorways or national roads. Their share in the polish road infrastructure is not dominant. Rural and communal roads roads are the most prevalent. This fact formed the basis of the exhaust emissions and fuel consumption tests of heavy vehicles in real operating conditions. A set of vehicles (truck tractor with a semi-trailer) meeting the Euro V emission norm, transporting a load of 24,800 kg, was selected for the tests. The research was carried out on an non-urban route, the test route length was 22 km. A mobile Semtech DS instrument was used, which was used to measure the exhaust emissions. Based on the obtained results, the emission characteristics were determined in relation to the operating parameters of the vehicles drive system. Road emission, specific emission and fuel consumption values were also calculated.


2014 ◽  
Vol 26 (6) ◽  
pp. 459-466 ◽  
Author(s):  
Hedvika Kovandová ◽  
Robert Válka

The paper deals with safety of transport from the point of view of an important social problem, which are accidents at railroad (including tramway) and road level crossings, which means compatibility of rail and road vehicles crash. The scale of such accidents can be very wide. Regarding the statistics and frequency of accidents particularly at railway level crossings and tramway level crossings, a collision simulating the collision of a tram and passenger car was experimentally carried out. The experiment took place at the site of testing laboratory of Rail Vehicles Research Institute in Cerhenice. The experiment was conducted with a passenger car Škoda Superb of the first generation that was exposed to two collisions from both sides. Firstly by the impactor for tram headstock tests and secondly by the tram headstock itself. Both the impactor and the headstock were placed on the experimental vehicle for tests of passive safety of rail vehicles. Various speeds were chosen so that the passenger car could be used for two subsequent experiments without the influence on properties of skeleton´s supporting structure.


Atmosphere ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 582
Author(s):  
Michal Vojtisek-Lom ◽  
Jonáš Jirků ◽  
Martin Pechout

The paper summarizes exhaust emissions measurements on two diesel-electric locomotives and one diesel-hydraulic railcar, each tested for several days during scheduled passenger service. While real driving emissions of buses decrease with fleet turnaround and have been assessed by many studies, there are virtually no realistic emissions data on diesel rail vehicles, many of which are decades old. The engines were fitted with low-power portable online monitoring instruments, including a portable Fourier Transform Infra Red (FTIR) spectrometer, online particle measurement, and in two cases with proportional particle sampling systems, all installed in engine compartments. Due to space constraints and overhead electric traction lines, exhaust flow was computed from engine operating data. Real-world operation was characterized by relatively fast power level transitions during accelerations and interleaved periods of high load and idle, and varied considerably among service type and routes. Spikes in PM emissions during accelerations and storage of PM in the exhaust were observed. Despite all engines approaching the end of their life, the emissions per passenger-km were very low compared to automobiles. Tests were done at very low costs with no disruption of the train service, yielded realistic data, and are also applicable to diesel-hydraulic units, which cannot be tested at standstill.


Author(s):  
Dustin T. Osborne ◽  
Steven G. Fritz ◽  
Mike Iden ◽  
Don Newburry

This paper describes the test results of a program to apply an experimental diesel oxidation catalyst (DOC) to a 2,850 kW freight locomotive. Locomotive emissions and fuel consumption measurements were performed on an Electro-Motive Diesel (EMD) model SD60M locomotive, owned by Union Pacific Railroad company, that had been recently rebuilt to EPA Tier 0 exhaust emission certification levels. Emission testing was performed at the Southwest Research Institute (SwRI) Locomotive Exhaust Emissions Test Center in San Antonio, Texas. US EPA-regulated emission levels of hydrocarbons (HC), carbon monoxide (CO), oxides of nitrogen (NOx), and participate (PM) were measured using U.S. EPA locomotive certification test procedures in three configurations; first a baseline with a relatively high sulfur diesel fuel (2,913 ppm sulfur) meeting EPA locomotive certification test specifications, and another baseline using ultra-low sulfur diesel fuel (ULDS), and finally a test using ULSD after the installation of a diesel oxidation catalyst designed and manufactured by MIRATECH Corporation (patent pending). The DOC was applied pre-turbine, within the exhaust manifold due to both space and exhaust temperature considerations. This paper describes the design of the DOC-equipped exhaust manifold, and reports the changes in the regulated exhaust emission levels between the baseline tests and after installation of the DOC. Also described is a locomotive on-board monitoring system used to monitor DOC performance during ongoing revenue service field testing.


Sign in / Sign up

Export Citation Format

Share Document