scholarly journals Multicriteria model of the process of crushing rock

2019 ◽  
Vol 80 (4) ◽  
pp. 111-115
Author(s):  
Yu. V. Bugaev ◽  
L. A. Korobova ◽  
I. S. Tolstova ◽  
Yu. A. Demina
Keyword(s):  
Internal Combustion Engines ◽  
A Priori ◽  
Quality Criteria ◽  
Point Of View ◽  
Production Costs ◽  
Model Quality ◽  
Main Equipment ◽  
Active Experiment ◽  
Energy Consuming ◽  
The Cost

The article deals with the modernization and adjustment of the fine chalk grinding process. The crushing process is an energy-consuming procedure, annually spent about 5% of all energy produced on Earth, including the energy of internal combustion engines. This indicates its great importance. In addition to the cost of electricity, large expenses go to repair the equipment. The greatest replacements are made on the main working parts of machines. In the course of substitutions a lot of time is spent, in order not to spend this rather important resource, it is necessary to approach this procedure from a scientific point of view. The organization and conduct of research on the replacement of the main working parts of crushers and mills will increase the productivity of the main equipment, improve the quality of the finished product and reduce production costs in terms of energy saving. Modernization and adjustment of technological equipment in order to improve the production process of fine chalk significantly increase the service life of the main equipment. For this purpose, it is proposed to conduct an active experiment. Before carrying out the experiment, it is necessary to set the model. The classical regression analysis is based on the assumption that the model type is a priori specified with accuracy to the parameters, and that an experiment has already been implemented that supplies the initial data for the regression construction. Hence, the problem is to choose the best method of data processing. In this paper, we propose a fundamentally new approach-automatic evaluation of the model options on a set of indicators, the calculation of which is based on a set of pareto-optimal variants of the model.The proposed method made it possible to identify two best alternatives out of 16384. Obviously, this approach can be easily modified for any other set of regression model quality criteria.

scholarly journals Quality of pre-sprouted sugarcane seedlings grown on substrates with decomposed babassu palm stem

2021 ◽  
Vol 51 ◽  
Author(s):  
Romário Martins Costa ◽  
Marcos Renan Lima Leite ◽  
Sâmia dos Santos Matos ◽  
Rayssa Carolinne Mouzinho de Sousa ◽  
Raissa Rachel Salustriano da Silva-Matos ◽  
...  
Keyword(s):  
Growth And Development ◽  
Dry Mass ◽  
Quality Parameters ◽  
Point Of View ◽  
Production Costs ◽  
Economic Point ◽  
Babassu Palm ◽  
Number Of Leaves ◽  
The Cost

ABSTRACT The use of pre-sprouted seedlings in the implantation of sugarcane crops not only reduces the establishment period and production costs, but also has other advantages, such as a lesser requirement of propagules (stems) and greater phytosanitary control of the seedlings, when compared to conventional planting. Commercial substrates are also expensive and their use increases the cost of seedlings. This study aimed to evaluate the quality of sugarcane pre-sprouted seedlings grown on substrates with different proportions of decomposed babassu palm stem (DBPS), as well as to recommend the substrate formulation that provides the most favorable environment for the growth and development of sugarcane pre-sprouted seedlings. For preparation of the substrate (S), DBPS and soil were used in the following proportions: S1: 0 % of DBPS + 100 % of soil; S2: 20 % of DBPS + 80 % of soil; S3: 40 % of DBPS + 60 % of soil; S4: 60 % of DBPS + 40 % of soil; S5: 80 % of DBPS + 20 % of soil; S6: 100 % of DBPS + 0 % of soil. The use of S2 and S3 considerably improved the seedling quality parameters, such as sprout diameter and length, number of leaves and total, shoot and root dry mass. However, from an economic point of view, S2 is recommended for use.

Internal cost control of health resort institutions: Methodological aspects

2021 ◽  
Vol 22 (7) ◽  
pp. 804-825
Author(s):  
Margarita F. SAFONOVA ◽  
Evgeniya S. VYALAYA
Keyword(s):  
Cost Control ◽  
Point Of View ◽  
Theory And Practice ◽  
Production Costs ◽  
Continuous Control ◽  
Health Resort ◽  
Food Treatment ◽  
Tax Management ◽  
Analysis And Synthesis ◽  
The Cost

Subject. This article analyzes the activities of therapeutic resort and spa facilities from the point of view of the social importance of the population's health. It discusses the problems of improving the system of cost control and calculating the cost of a unit of services provided by these facilities to obtain reliable information and optimize the costs. Objectives. Based on the analysis of statistical information and scientific sources, the article aims to form an opinion on the state of the health resort complex, the structure of costs, and their share by items and elements in the total amount of production costs, and develop a methodology for their continuous control, taking into account the industry specifics to minimize risks. Methods. For the study, we used analysis and synthesis, induction and deduction, literature review, and the calculation, graphical, accounting and analytical methods. Results. The article finds that the service provided by the health resort industry organizations is complex (accommodation, food, treatment) and therefore, it has a multi-element cost structure, which entails certain financial, tax, management risks that need continuous monitoring. Conclusions and Relevance. The proposed methodology helps to continuously control the costs of a multi-component service provided by economic entities of the health resort sector, optimizing them taking into account the industry specifics. This makes it possible to make this service more accessible to all segments of the population. The results of the study can be used in the theory and practice of internal cost control and the formation of the cost of a unit of services provided by the health resort institutions, as well as for further scientific developments and practical application.

scholarly journals Identification of Technoeconomic Opportunities with the Use of Premium Efficiency Motors as Alternative for Developing Countries

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5411 ◽  
Author(s):  
Julio R. Gómez ◽  
Enrique C. Quispe ◽  
Rosaura del Pilar Castrillón ◽  
Percy R. Viego
Keyword(s):  
Electric Motor ◽  
A Priori ◽  
Industrial Sector ◽  
Production Costs ◽  
Production Cycle ◽  
Final Decision ◽  
Discounted Cash Flow ◽  
Energy Saving Potential ◽  
Cost Of Energy ◽  
The Cost

More than 65% of electricity consumed worldwide by the industrial sector is used in electric-motor-driven systems. For this reason, the efficiency of electric motors is an important factor in improving the energy efficiency of the industry. Additionally, this contributes to reducing energy consumption, production costs, as well as CO2eq emissions. The replacement of motors with efficiency class IE1 by motors of efficiency class IE3 is one possible alternative to increase the efficiency of electric motor systems. When a program to replace motors with others of greater efficiency is initiated, it is necessary to casuistically evaluate all identified opportunities. Economic viability can be evaluated using a variety of methods. Often, the methods recommended by manufacturers or consulting entities focus on simple payback time without accounting for all influencing factors. This paper contributes to the academic discussion by proposing a methodology based on the calculation of energy-saving potential, by performing a preliminary an a priori evaluation and determining the economic opportunities. It avoids evaluating all motors in the studied facility and shows its effectiveness by using the cost of energy saved to distinguish which motors to evaluate. Finally, it provides a complete economic evaluation of the final decision on the basis of discounted cash flow methods. A short-production-cycle sugarcane industry was used in the case study.

scholarly journals Stamp-Charged Coke-Making Technology—The Effect of Charge Density and the Addition of Semi-Soft Coals on the Structural, Textural and Quality Parameters of Coke

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3401
Author(s):  
Michał Rejdak ◽  
Andrzej Strugała ◽  
Aleksander Sobolewski
Keyword(s):  
Coke Quality ◽  
Structural Parameters ◽  
World Market ◽  
Coke Production ◽  
Quality Parameters ◽  
Point Of View ◽  
Production Costs ◽  
Blast Furnace Charge ◽  
Large Fluctuations ◽  
The Cost

Coke is an integral component of the blast furnace charge; therefore, it plays an important role in the integrated steelmaking process. Achieving the required coke quality parameters by producers requires the use of a high proportion of the highest quality coking coals (hard coking coals) in the coking blends, which significantly increases the unit production costs. Approximately 75% of these costs are constituted by the cost of the coal blend’s preparation. There is a deficit in the best quality coking coals on the world market and their supply are characterized by large fluctuations in quality parameters. Therefore, from the point of view of the economics of coke production, it is advantageous to produce high-quality coke from a coke blend with the highest possible content of cheaper coals. The paper presents the results of the influence of coal charge bulk density and semi-soft coking coal content in the coking blend on the textural and structural parameters of coke, which determine its quality. Research has shown that the application of increased density influences the parameters of the texture and structure of the coke, which shape its quality parameters. The use of stamp-charging technology contributes to the improvement of the coke quality or enables the production of coke of a predetermined quality from blends containing cheaper semi-soft coals.

Catalog-Based Customization

1999 ◽  
Author(s):  
Bala Chidambaram ◽  
Alice M. Agogino
Keyword(s):  
Cost Function ◽  
Cost Estimation ◽  
A Priori ◽  
Production Costs ◽  
Estimation Methods ◽  
Optimization Formulation ◽  
Catalog Design ◽  
Standard Designs ◽  
Approximate Cost ◽  
The Cost

Abstract This paper develops a new method for implementing mass-customization, namely, the customization around standard products, or catalog-based customization. The method addresses the customization requirements of a class of products that are complex in configuration, multi-functional and structurally similar. We formulate catalog-based customization as an optimization problem consistent with the manufacturer’s goal of incurring minimal costs in the redesign of existing standard components, while meeting customer specifications and satisfying design constraints. The ‘catalog-based’ nature of the formulation raises concomitant issues of cost function development and problem simplification/solution. We identify the generational structure as best suited to exploit the cost data in existing catalogs and construct a product cost function. The cost-estimation methods used by the generational structure in the construction are identified as weight-based — for modeling the material costs, and methods based on similarity principles and regression analyses — for the production costs. The optimization formulation of catalog-based customization may be simplified by an a priori identification of a standard catalog design as the customization basis. This is accomplished with function costing — a cost-estimation hypothesis that uses product functionality to develop an approximate cost-estimate. The function-costing estimate is also used to abstract features from the standard base design into the optimization formulation. The preferred solution strategy for the optimization formulation is identified as genetic algorithms. We apply the customization method developed to Brushless D.C. Permanent Magnet (BDCPM) motors and obtain optimal minimal cost custom designs (from the standard designs of a BDCPM motor family) for different sets of customer requirements.

Evaluation Of The Functional Of Space-Planning Arrangement Of A Building

2019 ◽  
pp. 4-9
Keyword(s):  
Numerical Simulation ◽  
Life Cycle ◽  
Initial Data ◽  
Objective Assessment ◽  
Objective Evaluation ◽  
Point Of View ◽  
Shopping Centers ◽  
Space Planning ◽  
Planning Decisions ◽  
The Cost

The article focuses on the problem of the lack of objective evaluation of space-planning arrangement of buildings as a creative approach of the architect to the performing of functional tasks by the object. It is proposed to create a methodology for assessing the functional of space-planning solutions of buildings on the basis of numerical simulation of functional processes using the theory of human flows. There is a description of the prospects of using this method, which makes it possible to increase the coefficient of compactness, materials and works saving, more efficient use of space, reduce the cost of the life cycle of the building, save human forces and time to implement the functional of the building. The necessary initial data for modeling on the example of shopping and shopping-entertainment centers are considered. There are three main tasks for algorithmization of the functional of shopping centers. The conclusion is made about necessity of development of a method for objective assessment of buildings from the point of view of ergonomics of space-planning decisions based on the study of human behavior in buildings of different purposes.

A Fatal Error of Locke’s?

2017 ◽  
Author(s):  
Galen Strawson
Keyword(s):  
Personal Identity ◽  
John Locke ◽  
A Priori ◽  
Point Of View ◽  
Radical Theory ◽  
Single Person

This chapter argues that the unqualified attribution of the radical theory to John Locke is mistaken if we are to take into account the fact that the theory allows for freaks like [Sₓ]. It first considers [I]-transfer without [P]-transfer—that is, [I]-transfer preserving personal identity—before discussing Locke's response to the idea that personal identity might survive [I]-transfer from an a priori point of view. It suggests that [I]-transfer is possible in such a way that the existence of a single Person [P₁] from t₁ to t₂ can successively (and non-overlappingly) involve the existence of two immaterial substances. It also explains how Locke's claim that [I]-transfer is possible opens up the possibility that it could go wrong, in such a way as to lead to injustice. Finally, it examines Locke's notion of “sensible creature,” which refers to a subject of experience who is a person.

PREREQUISITES FOR THE FORMATION OF A MECHANISM FOR STATE REGULATION OF SOCIAL GUARANTEES IN THE REGION

2017 ◽  
Author(s):  
Vitaly Lobas ◽  
◽  
Elena Petryaeva ◽  
Keyword(s):  
Social Protection ◽  
Well Being ◽  
State Regulation ◽  
The State ◽  
Point Of View ◽  
Periodic Review ◽  
Cost Of Living ◽  
Economic Relations ◽  
State Management ◽  
The Cost

The article deals with modern mechanisms for managing social protection of the population by the state and the private sector. From the point of view of forms of state regulation of the sphere of social protection, system indicators usually include the state and dynamics of growth in the standard of living of the population, material goods, services and social guarantees for the poorly provided segments of the population. The main indicator among the above is the state of the consumer market, as one of the main factors in the development of the state. Priority areas of public administration with the use of various forms of social security have been identified. It should be emphasized that, despite the legislative conflicts that exist today in Ukraine, mandatory indexation of the cost of living is established, which is associated with inflation. Various scientists note that although the definition of the cost of living index has a well-established methodology, there are quite a lot of regional features in the structure of consumption. All this is due to restrictions that are included in the consumer basket of goods and different levels of socio-economic development of regions. The analysis of the establishment and periodic review of the minimum consumer budgets of the subsistence minimum and wages of the working population and the need to form state insurance funds for unforeseen circumstances is carried out. Considering in this context the levers of state management of social guarantees of the population, we drew attention to the crisis periods that are associated with the market transformation of the regional economy. In these conditions, there is a need to develop and implement new mechanisms and clusters in the system of socio-economic relations. The components of the mechanisms ofstate regulation ofsocial guarantees of the population are proposed. The deepening of market relations in the process of reforming the system of social protection of the population should be aimed at social well-being.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

scholarly journals Monitoring the technological processes in the wood industry in order to make them more efficient through technical overhauling

2019 ◽  
Vol 290 ◽  
pp. 02007
Author(s):  
Radu Dan Paltan ◽  
Cristina Biriş ◽  
Loredana Anne-Marie Rădulescu
Keyword(s):  
Automotive Industry ◽  
Operating Mode ◽  
Solid Wood ◽  
Production Costs ◽  
Operating Costs ◽  
Future Research ◽  
Wood Industry ◽  
Research Article ◽  
State Of Research ◽  
The Cost

Of many techniques that are used to optimize production and costs, the studies conducted within a profile company lead to our choice for testing the 6Sigma method (the most used method in the automotive industry) in view of the economic efficiency applied in the wood Industry company. This method measures how many flaws exist in a process and determines in a systematic way how to improve it by technical overhauling and eliminating or minimizing the process for efficiency. This research article aims to study the state of research on the optimization of the production process through technical overhauling for panels reconstituted from solid wood and ways to make production more efficient by cutting costs through technical overhauling. From preliminary research, we estimate that all the items founded and others that will result from further research will result in a significant decrease in production costs that are reflected in the cost of the finished product and consequently in increasing the yield of the company by maximizing its profit. At the same time it may be the basis of future research studies in the field. The easier it is to maximize profits, the lower the operating costs are and the higher recovery rate of investments are, that will result a change in the operating mode: “working smarter not harder”.

Sign in / Sign up

Export Citation Format

Share Document