scholarly journals Improvement of Filler-Matrix Interactions in Polypropylene/Montmorillonite Nanocomposites by Usıng Irradiated Polypropylene

2018 ◽  
Author(s):  
Fatma Zengin ◽  
Tahsin Çağlayan ◽  
Semra Ide ◽  
Olgun Güven
Keyword(s):  
Molecular Weight ◽  
Dose Rate ◽  
Chain Scission ◽  
Clay Nanocomposites ◽  
Melt Flow Rate ◽  
Clay Surface ◽  
Knowing That ◽  
Matrix Interactions ◽  
Organically Modified

In the preparation of polymer-clay nanocomposites the chemical incompatibility between the clay surface and polyolefins can be overcome by using clays organically modified with short chain organic cations. The compatibility can be further enhanced by using functionalized polymer that wets the clay surface while being miscible with the non-polar polymer matrix. In this work we tried to modify the host polymer polypropylene (PP) by irradiating it with gamma-rays in air knowing that it undergoes oxidation and chain scission simultaneously. Thus lower molecular weight PP with highly polar surface due to oxidation can be expected to play double role of clay modifier and functional compatibilizer. This has been observed to be the case. Finely ground PP granules were irradiated in air in a 60Co γ-irradiator at the dose rate of 0.08 kGy/h (low dose rate to enhance oxidation) to 5, 10, and 20 kGy total doses. The extent of oxidation and change in molecular weight were determined by ATR-FTIR and Melt Flow Rate measurements respectively. PP/MMT nanocomposites were prepared by using 20% γ-PP, 1-5 % MMT and pristine PP to make up the total 100 in a torque rheometer. Maleated PP was also used in similar quantities to compare the effectiveness of γ-PP as a compatibilizing agent. Nanocomposites prepared with 10 kGy irradiated PP was found to show optimum mechanical properties among all formulations, with 26% increase in E-modulus and 10% increase in tensile strength as compared to pristine PP. Ternary PP nanocomposites were characterized by XRD, SAXS and PALS studies.

scholarly journals Adiponectin: Structure, Physiological Functions, Role in Diseases, and Effects of Nutrition

Nutrients ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 1180
Author(s):  
Kayvan Khoramipour ◽  
Karim Chamari ◽  
Amirhosein Ahmadi Hekmatikar ◽  
Amirhosein Ziyaiyan ◽  
Shima Taherkhani ◽  
...  
Keyword(s):  
Cardiovascular Disease ◽  
Amino Acids ◽  
Molecular Weight ◽  
Energy Regulation ◽  
Treatment Interventions ◽  
Adipose Tissues ◽  
Physiological Functions ◽  
Cellular Events ◽  
Healthy Nutrition

Adiponectin (a protein consisting of 244 amino acids and characterized by a molecular weight of 28 kDa) is a cytokine that is secreted from adipose tissues (adipokine). Available evidence suggests that adiponectin is involved in a variety of physiological functions, molecular and cellular events, including lipid metabolism, energy regulation, immune response and inflammation, and insulin sensitivity. It has a protective effect on neurons and neural stem cells. Adiponectin levels have been reported to be negatively correlated with cancer, cardiovascular disease, and diabetes, and shown to be affected (i.e., significantly increased) by proper healthy nutrition. The present review comprehensively overviews the role of adiponectin in a range of diseases, showing that it can be used as a biomarker for diagnosing these disorders as well as a target for monitoring the effectiveness of preventive and treatment interventions.

scholarly journals Improving Rheological and Mechanical Properties of Various Virgin and Recycled Polypropylenes by Blending with Long-Chain Branched Polypropylene

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1137
Author(s):  
Sascha Stanic ◽  
Thomas Koch ◽  
Klaus Schmid ◽  
Simone Knaus ◽  
Vasiliki-Maria Archodoulaki
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Tensile Test ◽  
Reactive Extrusion ◽  
Original Material ◽  
Melt Flow Rate ◽  
Single Screw Extruder ◽  
Pp Blends ◽  
The Impact ◽  
Long Chain

Blends of two long-chain branched polypropylenes (LCB-PP) and five linear polypropylenes (L-PP) were prepared in a single screw extruder at 240 °C. The two LCB-PPs were self-created via reactive extrusion at 180 °C by using dimyristyl peroxydicarbonate (PODIC C126) and dilauroyl peroxide (LP) as peroxides. For blending two virgin and three recycled PPs like coffee caps, yoghurt cups and buckets with different melt flow rate (MFR) values were used. The influence of using blends was assessed by investigating the rheological (dynamic and extensional rheology) and mechanical properties (tensile test and impact tensile test). The dynamic rheology indicated that the molecular weight as well as the molecular weight distribution could be increased or broadened. Also the melt strength behavior could be improved by using the two peroxide modified LCB-PP blends on the basis of PODIC C126 or PEROXAN LP (dilauroyl peroxide). In addition, the mechanical properties were consistently enhanced or at least kept constant compared to the original material. In particular, the impact tensile strength but also the elongation at break could be increased considerably. This study showed that the blending of LCB-PP can increase the investigated properties and represents a promising option, especially when using recycled PP, which demonstrates a real “up-cycling” process.

Neurofilament phosphorylation

1995 ◽  
Vol 73 (9-10) ◽  
pp. 575-592 ◽  
Author(s):  
Harish C. Pant ◽  
Veeranna
Keyword(s):  
Molecular Weight ◽  
Nervous System ◽  
Nervous Tissue ◽  
Important Determinant ◽  
Neurofilament Proteins ◽  
Neurofilament Phosphorylation ◽  
Axonal Compartment

Neurofilament proteins (NFPs) are highly phosphorylated molecules in the axonal compartment of the adult nervous system. The phosphorylation of NFP is considered an important determinant of filament caliber, plasticity, and stability. This process reflects the function of NFs during the lifetime of a neuron from differentiation in the embryo through long-term activity in the adult until aging and environmental insult leads to pathology and ultimately death. NF function is modulated by phosphorylation–dephosphorylation in each of these diverse neuronal states. In this review, we have summarized some of these properties of NFP in adult nervous tissue, mostly from work in our own laboratory. Identification of sites phosphorylated in vivo in high molecular weight NFP (NF-H) and properties of NF-associated and neural-specific kinases phosphorylating specific sites in NFP are described. A model to explain the role of NF phosphorylation in determining filament caliber, plasticity, and stability is proposed.Key words: neurofilament proteins, phosphorylation, kinases, phosphatases, regulators, inhibitors, multimesic complex, domains.

Detection of inducible nitric oxide synthase inSchistosoma japonicumandS. mansoni

2004 ◽  
Vol 78 (1) ◽  
pp. 47-50 ◽  
Author(s):  
X.-C. Long ◽  
M. Bahgat ◽  
K. Chlichlia ◽  
A. Ruppel ◽  
Y.-L. Li
Keyword(s):  
Nitric Oxide ◽  
Molecular Weight ◽  
Inducible Nitric Oxide Synthase ◽  
Mouse Liver ◽  
Apparent Molecular Weight ◽  
Western Blots ◽  
Oxide Synthase ◽  
Host Tissues ◽  
Inducible Nitric Oxide

AbstractSchistosoma japonicumandS. mansoniwere tested for reactivity with an anti-inducible nitric oxide (iNOS) antibody and the distribution of iNOS was studied by immunofluorescent tests in different stages of the parasites. Reactivity was associated with the tegument in both larval schistosomes (sporocysts and cercariae) and eggs. With adult worms, the majority of the immunofluorescence was predominantly subtegumental inS. japonicumand parenchymal inS. mansoni. Fluorescence was also observed in host tissues (snails and mouse liver). In Western blots, the enzyme ofS. japonicumhad an apparent molecular weight of about 210 kDa. The possible role of worm and host iNOS in the parasite–host interrelation remains to be clarified.

Sign in / Sign up

Export Citation Format

Share Document