scholarly journals Experimental Digital Animation in Fluid Dynamics

2021 ◽  
Author(s):  
Irina Znamenskaya ◽  
Nikolay Sysoev ◽  
Igor Doroshchenko
Keyword(s):  
High Speed ◽  
Video Recording ◽  
Ccd Camera ◽  
Frame Rate ◽  
Thermal Plume ◽  
Digital Animation ◽  
Learning Techniques ◽  
Canny Edge ◽  
Sequential Images ◽  
Shock Detection

Digital imaging became one of the main tools for studying unsteady flows. Modern high-speed cameras support video recording at high frame rates which makes it possible to study extended high-speed processes. We demonstrate here different animations: water temperature field evolution with a frame rate of 115 Hz; high-speed shadowgraph visualisation of different flows - water jet formation process (100 000 frames / s), shadowgraph animations of the shock waves created by the pulsed discharges (124 000 frames / s). Also, as an example of plasma flow visualization technique, we offer 9 sequential images of the shock wave - pulse gas discharge visualization obtained by the high-speed CCD camera with the 100 ns delay between frames. We developed in-house software based on the machine vision and learning techniques for automatic flow animations processing. The examples of the automatic oblique shock detection using Canny edge detection and Hough transform and thermal plume detection based on the pre-trained convolutional neural network are provided and discussed.

Nucleate Boiling From Micro-Machined Surfaces

2003 ◽  
Author(s):  
Adrian M. Holland ◽  
Colin P. Garner
Keyword(s):  
Heat Transfer ◽  
High Speed ◽  
Imaging System ◽  
Laser System ◽  
Ccd Camera ◽  
Nucleate Boiling ◽  
Heat Fluxes ◽  
Frame Rate ◽  
High Speed Imaging ◽  
Machined Surfaces

This paper discusses the production and use of laser-machined surfaces that provide enhanced nucleate boiling and heat transfer characteristics. The surface features of heated plates are known to have a significant effect on nucleate boiling heat transfer and bubble growth dynamics. Nucleate boiling starts from discrete bubbles that form on surface imperfections, such as cavities or scratches. The gas or vapours trapped in these imperfections serve as nuclei for the bubbles. After inception, the bubbles grow to a certain size and depart from the surface. In this work, special heated surfaces were manufactured by laser machining cavities into polished aluminium plates. This was accomplished with a Nd:YAG laser system, which allowed drilling of cavities of a known diameter. The size range of cavities was 20 to 250 micrometers. The resulting nucleate pool boiling was analysed using a novel high-speed imaging system comprising an infrared laser and high resolution CCD camera. This system was operated up to a 2 kHz frame rate and digital image processing allowed bubbles to be analysed statistically in terms of departure diameter, departure frequency, growth rate, shape and velocity. Data was obtained for heat fluxes up to 60 kW.m−2. Bubble measurements were obtained working with water at atmospheric pressure. The surface cavity diameters were selected to control the temperature at which vapour bubbles started to grow on the surface. The selected size and spacing of the cavities was also explored to provide optimal heat transfer.

An Intelligent High-Frame-Rate Video Logging System for Abnormal Behavior Analysis

2011 ◽  
Vol 23 (1) ◽  
pp. 53-65 ◽  
Author(s):  
Yao-DongWang ◽  
◽  
Idaku Ishii ◽  
Takeshi Takaki ◽  
Kenji Tajima ◽  
...  
Keyword(s):  
Real Time ◽  
Video Processing ◽  
High Speed ◽  
Vision System ◽  
Video Recording ◽  
Frame Rate ◽  
Abnormal Behavior ◽  
High Frame Rate ◽  
Abnormal Behavior Detection ◽  
Abnormal Behaviors

This paper introduces a high-speed vision system called IDP Express, which can execute real-time image processing and High-Frame-Rate (HFR) video recording simultaneously. In IDP Express, 512×512 pixel images from two camera heads and the processed results on a dedicated FPGA (Field Programmable Gate Array) board are transferred to standard PC memory at a rate of 1000 fps or more. Owing to the simultaneous HFR video processing and recording, IDP Express can be used as an intelligent video logging system for long-term high-speed phenomenon analysis. In this paper, a real-time abnormal behavior detection algorithm was implemented on IDP-Express to capture HFR videos of crucial moments of unpredictable abnormal behaviors in high-speed periodic motions. Several experiments were performed for a high-speed slider machine with repetitive operation at a frequency of 15 Hz and videos of the abnormal behaviors were automatically recorded to verify the effectiveness of our intelligent HFR video logging system.

1A1-C12 High- Speed Active Vision with High-Frame-Rate Video Recording

2009 ◽  
Vol 2009 (0) ◽  
pp. _1A1-C12_1-_1A1-C12_4
Author(s):  
Tetsuro Tatebe ◽  
Yuta Moriue ◽  
Takeshi Takaki ◽  
Idaku Ishii ◽  
Kenji Tajima
Keyword(s):  
High Speed ◽  
Video Recording ◽  
Active Vision ◽  
Frame Rate ◽  
High Frame Rate

scholarly journals Collision of water drops with a thin cylinder

2021 ◽  
Vol 2057 (1) ◽  
pp. 012034
Author(s):  
A I Fedyushkin ◽  
A N Rozhkov ◽  
A O Rudenko
Keyword(s):  
Stainless Steel ◽  
High Speed ◽  
Video Recording ◽  
Frame Rate ◽  
Drop Diameter ◽  
Outer Diameter ◽  
Stainless Steel Capillary ◽  
Thin Cylinder ◽  
Water Drops ◽  
The Impact

Abstract The collision of water drops with a thin cylinder is studied. The droplet flight trajectory and the cylinder axis are mutually perpendicular. In the experiments, the drop diameter is 3 mm, and the diameter of horizontal stainless-steel cylinders is 0.4 and 0.8 mm. The drops are formed by a liquid slowly pumped through a vertical stainless-steel capillary with an outer diameter of 0.8 mm, from which droplets are periodically separated under the action of gravity. The droplet velocity before collision is defined by the distance between the capillary cut and the target (cylinder); in experiments, this distance is approximately 5, 10, and 20 mm. The drop velocities before the impact are estimated in the range of 0.2–0.5 m/s. The collision process is monitored by high-speed video recording methods with a frame rate of 240 and 960 Hz. The test liquids are water. Experiments and numerical simulation show that, depending on the drop impact height (droplets velocity) different scenarios of a drop collision with a thin cylinder are possible: a short-term recoil of a drop from an obstacle, a drop flowing around a cylindrical obstacle while maintaining the continuity of the drop, the breakup of a drop into two secondary drops, one of which can continue flight and the other one is captured by the cylinder, or both secondary droplets continue to fly, and the drop can be also captured by the cylinder, until the impact of the next drop(s) forces the accumulated drop to detach from the cylinder. Numerical modeling satisfactorily reproduces the phenomena observed in the experiment.

High-speed brightfield 3-D imaging and 3-D image analysis of thick and overlapped cell clusters in cytological preparations

1994 ◽  
Vol 52 ◽  
pp. 218-219
Author(s):  
Robert W. Mackin
Keyword(s):  
Image Analysis ◽  
High Speed ◽  
Three Dimensional ◽  
Image Data ◽  
Ccd Camera ◽  
Objective Lens ◽  
Array Processor ◽  
Vaginal Smears ◽  
Low Contrast ◽  
Computer Controlled

This paper presents two advances towards the automated three-dimensional (3-D) analysis of thick and heavily-overlapped regions in cytological preparations such as cervical/vaginal smears. First, a high speed 3-D brightfield microscope has been developed, allowing the acquisition of image data at speeds approaching 30 optical slices per second. Second, algorithms have been developed to detect and segment nuclei in spite of the extremely high image variability and low contrast typical of such regions. The analysis of such regions is inherently a 3-D problem that cannot be solved reliably with conventional 2-D imaging and image analysis methods.High-Speed 3-D imaging of the specimen is accomplished by moving the specimen axially relative to the objective lens of a standard microscope (Zeiss) at a speed of 30 steps per second, where the stepsize is adjustable from 0.2 - 5μm. The specimen is mounted on a computer-controlled, piezoelectric microstage (Burleigh PZS-100, 68/μm displacement). At each step, an optical slice is acquired using a CCD camera (SONY XC-11/71 IP, Dalsa CA-D1-0256, and CA-D2-0512 have been used) connected to a 4-node array processor system based on the Intel i860 chip.

Five-Dimensional Microscopy using Widefield-Deconvolution: Practical Considerations and Biological Applications

1996 ◽  
Vol 54 ◽  
pp. 268-269
Author(s):  
W.F. Marshall ◽  
K. Oegema ◽  
J. Nunnari ◽  
A.F. Straight ◽  
D.A. Agard ◽  
...  
Keyword(s):  
Confocal Microscopy ◽  
High Speed ◽  
Laser Scanning ◽  
Ccd Camera ◽  
Image Plane ◽  
Time Lapse ◽  
Laser Scanning Confocal Microscopy ◽  
Three Dimensions ◽  
Excitation Light ◽  
Cooled Ccd

The ability to image cells in three dimensions has brought about a revolution in biological microscopy, enabling many questions to be asked which would be inaccessible without this capability. There are currently two major methods of three dimensional microscopy: laser-scanning confocal microscopy and widefield-deconvolution microscopy. The method of widefield-deconvolution uses a cooled CCD to acquire images from a standard widefield microscope, and then computationally removes out of focus blur. Using such a scheme, it is easy to acquire time-lapse 3D images of living cells without killing them, and to do so for multiple wavelengths (using computer-controlled filter wheels). Thus, it is now not only feasible, but routine, to perform five dimensional microscopy (three spatial dimensions, plus time, plus wavelength).Widefield-deconvolution has several advantages over confocal microscopy. The two main advantages are high speed of acquisition (because there is no scanning, a single optical section is acquired at a time by using a cooled CCD camera) and the use of low excitation light levels Excitation intensity can be much lower than in a confocal microscope for three reasons: 1) longer exposures can be taken since the entire 512x512 image plane is acquired in parallel, so that dwell time is not an issue, 2) the higher quantum efficiently of a CCD detect over those typically used in confocal microscopy (although this is expected to change due to advances in confocal detector technology), and 3) because no pinhole is used to reject light, a much larger fraction of the emitted light is collected. Thus we can typically acquire images with thousands of photons per pixel using a mercury lamp, instead of a laser, for illumination. The use of low excitation light is critical for living samples, and also reduces bleaching. The high speed of widefield microscopy is also essential for time-lapse 3D microscopy, since one must acquire images quickly enough to resolve interesting events.

scholarly journals On-CMOS Image Sensor Processing for Lane Detection

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3713
Author(s):  
Soyeon Lee ◽  
Bohyeok Jeong ◽  
Keunyeol Park ◽  
Minkyu Song ◽  
Soo Youn Kim
Keyword(s):  
Edge Detection ◽  
High Speed ◽  
Cmos Image Sensor ◽  
Image Sensor ◽  
Image Resolution ◽  
Lane Detection ◽  
Frame Rate ◽  
Total Power ◽  
Detection Accuracy ◽  
Total Power Consumption

This paper presents a CMOS image sensor (CIS) with built-in lane detection computing circuits for automotive applications. We propose on-CIS processing with an edge detection mask used in the readout circuit of the conventional CIS structure for high-speed lane detection. Furthermore, the edge detection mask can detect the edges of slanting lanes to improve accuracy. A prototype of the proposed CIS was fabricated using a 110 nm CIS process. It has an image resolution of 160 (H) × 120 (V) and a frame rate of 113, and it occupies an area of 5900 μm × 5240 μm. A comparison of its lane detection accuracy with that of existing edge detection algorithms shows that it achieves an acceptable accuracy. Moreover, the total power consumption of the proposed CIS is 9.7 mW at pixel, analog, and digital supply voltages of 3.3, 3.3, and 1.5 V, respectively.

Towards A Multi-FPGA Infrared Simulator

2007 ◽  
Vol 4 (4) ◽  
pp. 343-355 ◽  
Author(s):  
Vinay Sriram ◽  
David Kearney
Keyword(s):  
Homeland Security ◽  
Reconfigurable Computing ◽  
High Speed ◽  
High Performance ◽  
Large Scale ◽  
Computation Time ◽  
Ccd Camera ◽  
Hardware Acceleration ◽  
Limiting Factor ◽  
Scene Simulation

High speed infrared (IR) scene simulation is used extensively in defense and homeland security to test sensitivity of IR cameras and accuracy of IR threat detection and tracking algorithms used commonly in IR missile approach warning systems (MAWS). A typical MAWS requires an input scene rate of over 100 scenes/second. Infrared scene simulations typically take 32 minutes to simulate a single IR scene that accounts for effects of atmospheric turbulence, refraction, optical blurring and charge-coupled device (CCD) camera electronic noise on a Pentium 4 (2.8GHz) dual core processor [7]. Thus, in IR scene simulation, the processing power of modern computers is a limiting factor. In this paper we report our research to accelerate IR scene simulation using high performance reconfigurable computing. We constructed a multi Field Programmable Gate Array (FPGA) hardware acceleration platform and accelerated a key computationally intensive IR algorithm over the hardware acceleration platform. We were successful in reducing the computation time of IR scene simulation by over 36%. This research acts as a unique case study for accelerating large scale defense simulations using a high performance multi-FPGA reconfigurable computer.

A Two-Dimensional Surface Profile Imaging Technique Based on Heterodyne Interferometer

2005 ◽  
Vol 295-296 ◽  
pp. 477-482
Author(s):  
K.W. Wang ◽  
Z.J. Cai ◽  
Li Jiang Zeng
Keyword(s):  
High Speed ◽  
Imaging Technique ◽  
Surface Profile ◽  
Ccd Camera ◽  
Measurement Range ◽  
Interference Signal ◽  
Two Dimensional ◽  
Step Method ◽  
Heterodyne Interferometer ◽  
Dimensional Surface

A two-dimensional surface profile imaging technique based on heterodyne interferometer is proposed. A piezo translator vibrated grating is used to generate a heterodyne signal. A high speed CCD camera is used to extract the interference signal using a five step method. The uncertainty in the displacement measurement is approximately 0.035 µm within a measurement range of 1.7 µm, confirming the two dimensional heterodyne interferometer is valid for measuring the surface profile. The method is also available for low coherence heterodyne interferometer due to the optical frequency shifts caused by the vibration of grating independent on the wavelength.

Sign in / Sign up

Export Citation Format

Share Document