Fuel Operated Heaters Applied to Electric Vehicles

2014 ◽  
Vol 8 (5) ◽  
pp. 723-732 ◽  
Author(s):  
Tetsushi Mimuro ◽  
◽  
Hiroyuki Takanashi ◽  
Keyword(s):  
Carbon Dioxide ◽  
Energy Efficiency ◽  
Global Warming ◽  
Electric Vehicles ◽  
Combustion Engine ◽  
Positive Temperature Coefficient ◽  
Positive Temperature ◽  
Heating Performance ◽  
Battery Capacity ◽  
Pros And Cons

In recent years, numerous automobile manufacturers have been pursuing the development of Electric Vehicles (EVs) as a response to environmental problems such as global warming. Such EVs usually have shorter ranges than Internal Combustion Engine (ICE) vehicles because of their limited battery capacity. This problem is exacerbated in the winter, especially in cold districts, as the need for electricity to heat vehicle cabins results in drastic mileage reductions. One readily available solution to this problem is the use of Fuel-Operated Heaters (FOHs), and in this study we have performed field operation tests on such heaters retrofitted into mass-produced EVs. The pros and cons of FOH use with EVs will be discussed in comparison with Positive Temperature Coefficient (PTC) and heat pump heaters from the viewpoints of energy efficiency, carbon dioxide (CO2) emissions, heating performance, mileage influence, and usability.

scholarly journals Life Cycle Assessment of Electric Vehicle Batteries: An Overview of Recent Literature

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2864 ◽  
Author(s):  
Andrea Temporelli ◽  
Maria Leonor Carvalho ◽  
Pierpaolo Girardi
Keyword(s):  
Life Cycle ◽  
Electric Vehicles ◽  
Combustion Engine ◽  
Climate Change Impacts ◽  
Hybrid Vehicles ◽  
Decision Makers ◽  
Life Cycle Assessments ◽  
Battery Capacity ◽  
Automotive Batteries ◽  
Use Phase

In electric and hybrid vehicles Life Cycle Assessments (LCAs), batteries play a central role and are in the spotlight of scientific community and public opinion. Automotive batteries constitute, together with the powertrain, the main differences between electric vehicles and internal combustion engine vehicles. For this reason, many decision makers and researchers wondered whether energy and environmental impacts from batteries production, can exceed the benefits generated during the vehicle’s use phase. In this framework, the purpose of the present literature review is to understand how large and variable the main impacts are due to automotive batteries’ life cycle, with particular attention to climate change impacts, and to support researchers with some methodological suggestions in the field of automotive batteries’ LCA. The results show that there is high variability in environmental impact assessment; CO2eq emissions per kWh of battery capacity range from 50 to 313 g CO2eq/kWh. Nevertheless, either using the lower or upper bounds of this range, electric vehicles result less carbon-intensive in their life cycle than corresponding diesel or petrol vehicles.

Experimental Investigation on Heating Performance of Newly Designed Air Source Heat Pump System for Electric Vehicles

2020 ◽  
Vol 13 (2) ◽  
Author(s):  
Kang Li ◽  
Jun Yu ◽  
Rong Yu ◽  
Lin Su ◽  
Yidong Fang ◽  
...  
Keyword(s):  
Heat Pump ◽  
Electric Vehicles ◽  
Flow Characteristics ◽  
Cold Climate ◽  
Positive Temperature ◽  
Pump System ◽  
Cooling Performance ◽  
Heat Pump System ◽  
Heating Performance ◽  
Driving Range

Abstract Utilizing the heat from air source with heat pump system in electric vehicles shows a significant advantage from thermoelectric heat source for heat supply in cold climate. It could improve the driving range of electric vehicles considerably in winter and replace the positive temperature coefficient (PTC) heater with an acceptable cost and reliability. In this work, a newly designed heat pump system was first introduced with less components and cost. Second, experiments were conducted to investigate its cooling performance, and subsequent heating performance from −10 to 10 °C. The typical heat transfer and flow characteristics of refrigerant were recorded, and the behavior of each component including compressor, evaporator, condenser, and outside heat exchanger were analyzed and interpreted. The results showed that the heating and cooling performance of the new heat pump system could almost remain the same with traditional air-conditioning system in automobile and surely satisfy with the heat requirement of electric vehicles. In the heating mode, the maximum heating capacity increases by 13% at 400 m3/h air volume from 300 m3/h at the ambient temperature −10 °C, while the outlet air temperature decreases by 4–6%. In addition, using a heat pump system showed an increase in the driving range of electric vehicles by 25–31% as compared to PTC heaters.

Forecasting the Ecology Effects of Electric Cars Deployment in Krasnodar Region: Learning Curves Approach

2018 ◽  
Vol 9 (1) ◽  
pp. 82 ◽  
Author(s):  
Svetlana RATNER ◽  
Marina ZARETSKAYA
Keyword(s):  
Energy Efficiency ◽  
Electric Vehicles ◽  
Environmental Effects ◽  
Combustion Engine ◽  
Environmental Indicators ◽  
Learning Curves ◽  
Transport Systems ◽  
Clear Understanding ◽  
Electric Cars ◽  
Krasnodar Region

One of the most urgent problems of modern urban agglomerations is the optimization of the structure and technological maintenance of transport systems. As one of the options to solve this problem, the development of electric vehicles (EV) is usually suggested. But the scientific community has still not developed a clear understanding of whether electric vehicles are a better alternative to traditional cars, considering all environmental indicators. The aim of this work is to develop a method of forecasting the environmental effects of diffusion of EV technologies and test it on the example of the Krasnodar region of Russia as a region with the highest motorization ratios in the country, a complicated ecologic situation in large cities, a high population density and a modern structure for energy generation.  The technical progress in energy efficiency of each technology is taken into consideration. We use learning theory as a methodological framework, which is common for solution of problems of forecasting technological development. According to the calculations, the total emissions from private motor vehicles, with an increase in energy efficiency of vehicles with internal combustion engine and increase penetration of electric vehicles should decrease in 2025 by 15% comparing business-as-usual scenario, despite a significant increase in the level of motorization (almost 65%). Thus, a wide spread of EV technologies is preferable from an environmental point of view. The proposed approach to predict the environmental effects of diffusion of EV technologies allows us to estimate the reduction in emissions from road transport in any region while maintaining the direction and speed of the following key trends: the growth of energy efficiency and environmental performance of traditional cars with combustion engines, the growth of the level of motorization of the population in Russia, and reduction of EVs costs. Additional effects of stimulating (or de-stimulating) policies are not considered in this model.

scholarly journals Comparisons of Real-World Vehicle Energy Efficiency with Dynamometer-Based Ratings and Simulation Models

2021 ◽  
Vol 12 (4) ◽  
pp. 161
Author(s):  
Karim Hamza ◽  
Kang-Ching Chu ◽  
Matthew Favetti ◽  
Peter Keene Benoliel ◽  
Vaishnavi Karanam ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Electric Vehicles ◽  
Fuel Economy ◽  
Real World ◽  
Hybrid Electric Vehicle ◽  
Energy Intensity ◽  
Hybrid Electric Vehicles ◽  
Combustion Engine ◽  
Simulation Models ◽  
Hybrid Electric

Software tools for fuel economy simulations play an important role during design stages of advanced powertrains. However, calibration of vehicle models versus real-world driving data faces challenges owing to inherent variations in vehicle energy efficiency across different driving conditions and different vehicle owners. This work utilizes datasets of vehicles equipped with OBD/GPS loggers to validate and calibrate FASTSim (software originally developed by NREL) vehicle models. The results show that window-sticker ratings (derived from dynamometer tests) can be reasonably accurate when averaged across many trips by different vehicle owners, but successfully calibrated FASTSim models can have better fidelity. The results in this paper are shown for nine vehicle models, including the following: three battery-electric vehicles (BEVs), four plug-in hybrid electric vehicles (PHEVs), one hybrid electric vehicle (HEV), and one conventional internal combustion engine (CICE) vehicle. The calibrated vehicle models are able to successfully predict the average trip energy intensity within ±3% for an aggregate of trips across multiple vehicle owners, as opposed to within ±10% via window-sticker ratings or baseline FASTSim.

scholarly journals Comparison of the Overall Energy Efficiency for Internal Combustion Engine Vehicles and Electric Vehicles

2020 ◽  
Vol 24 (1) ◽  
pp. 669-680
Author(s):  
Aiman Albatayneh ◽  
Mohammad N. Assaf ◽  
Dariusz Alterman ◽  
Mustafa Jaradat
Keyword(s):  
Energy Efficiency ◽  
Renewable Energy ◽  
Power Plant ◽  
Natural Gas ◽  
Internal Combustion Engine ◽  
Electric Vehicles ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Basic Question ◽  
Electric Cars

Abstract The tremendous growth in the transportation sector as a result of changes in our ways of transport and a rise in the level of prosperity was reflected directly by the intensification of energy needs. Thus, electric vehicles (EV) have been produced to minimise the energy consumption of conventional vehicles. Although the EV motor is more efficient than the internal combustion engine, the well to wheel (WTW) efficiency should be investigated in terms of determining the overall energy efficiency. In simple words, this study will try to answer the basic question – is the electric car really energy efficient compared with ICE-powered vehicles? This study investigates the WTW efficiency of conventional internal combustion engine vehicles ICEVs (gasoline, diesel), compressed natural gas vehicles (CNGV) and EVs. The results show that power plant efficiency has a significant consequence on WTW efficiency. The total WTW efficiency of gasoline ICEV ranges between 11–27 %, diesel ICEV ranges from 25 % to 37 % and CNGV ranges from 12 % to 22 %. The EV fed by a natural gas power plant shows the highest WTW efficiency which ranges from 13 % to 31 %. While the EV supplied by coal-fired and diesel power plants have approximately the same WTW efficiency ranging between 13 % to 27 % and 12 % to 25 %, respectively. If renewable energy is used, the losses will drop significantly and the overall efficiency for electric cars will be around 40–70% depending on the source and the location of the renewable energy systems.

scholarly journals Quest for Sustainability: Life-Cycle Emissions Assessment of Electric Vehicles Considering Newer Li-Ion Batteries

2019 ◽  
Vol 11 (8) ◽  
pp. 2366 ◽  
Author(s):  
Arminda Almeida ◽  
Nuno Sousa ◽  
João Coutinho-Rodrigues
Keyword(s):  
Life Cycle ◽  
Electric Vehicles ◽  
Electricity Generation ◽  
Combustion Engine ◽  
Statistical Significance ◽  
Sustainable Transportation ◽  
Assessment Model ◽  
Battery Capacity ◽  
Li Ion ◽  
The Impact

The number of battery electric vehicle models available in the market has been increasing, as well as their battery capacity, and these trends are likely to continue in the future as sustainable transportation goals rise in importance, supported by advances in battery chemistry and technology. Given the rapid pace of these advances, the impact of new chemistries, e.g., lithium-manganese rich cathode materials and silicon/graphite anodes, has not yet been thoroughly considered in the literature. This research estimates life cycle greenhouse gas and other air pollutants emissions of battery electric vehicles with different battery chemistries, including the above advances. The analysis methodology, which uses the greenhouse gases, regulated emissions, and energy use in transportation (GREET) life-cycle assessment model, considers 8 battery types, 13 electricity generation mixes with different predominant primary energy sources, and 4 vehicle segments (small, medium, large, and sport utility vehicles), represented by prototype vehicles, with both battery replacement and non-replacement during the life cycle. Outputs are expressed as emissions ratios to the equivalent petrol internal combustion engine vehicle and two-way analysis of variance is used to test results for statistical significance. Results show that newer Li-ion battery technology can yield significant improvements over older battery chemistries, which can be as high as 60% emissions reduction, depending on pollutant type and electricity generation mix.

Natural Refrigerants

1998 ◽  
Vol 120 (10) ◽  
pp. 96-99 ◽  
Author(s):  
Yunho Hwang ◽  
Michael Ohadi ◽  
Reinhard Radermacher
Keyword(s):  
Carbon Dioxide ◽  
Energy Efficiency ◽  
Global Warming ◽  
Environmental Impact ◽  
Global Warming Potential ◽  
Thermal Characteristics ◽  
Environmentally Benign ◽  
Advantages And Disadvantages ◽  
Clear Advantage

This article explains that substances such as air, water, ammonia, hydrocarbons, and carbon dioxide may provide solutions to the problem of finding environmentally acceptable refrigerants. The search for new and environmentally benign refrigerants to replace the existing chlorofluorocarbons (CFC) and hydrochlorofluorocarbons (HCFC) has led to the introduction of hydrofluorocarbons (HFC). HFCs could be useful as short- and mid-term replacements, but may ultimately not be suitable, owing to their high global-warming potential (GWP). Natural refrigerants still have several technical and safety challenges to overcome, and each has its unique advantages and disadvantages. Refrigerant, carbon dioxide offers a clear advantage over CFCs and HCFCs from the environmental impact standpoint. In addition to its environmental advantages, carbon dioxide also offers certain attractive thermal characteristics that can help it provide substantial potential as a long-term replacement if energy efficiency challenges can be addressed.

Studies in polymerization - VII. The polymerization of N -carboxy-α-amino acid anhydrides

1954 ◽  
Vol 223 (1155) ◽  
pp. 495-520 ◽  
Keyword(s):  
Carbon Dioxide ◽  
Amino Acid ◽  
Reaction Scheme ◽  
Positive Temperature Coefficient ◽  
Positive Temperature ◽  
First Order ◽  
Molecular Weights ◽  
Rate Determining Step ◽  
Acid Anhydrides ◽  
Kinetics Of

The kinetics of the polymerization of the N -carbonic anhydrides of DL-leucine, DL-phenylalanine and sarcosine in nitrobenzene solution have been studied. When preformed polymer is used as initiator, and in the complete absence of water, the first two anhydrides polymerize at rates which show first-order dependence on the monomer (anhydride) and initiator con­centrations. The reaction of the sarcosine derivative, however, while first order in monomer, is very nearly second order in initiator, and is strongly catalyzed by carbon dioxide. This latter effect is attributed to the substituted carbamic acids formed by interaction of carbon dioxide and bases in the system. Other acids have been shown to be catalysts for the reaction. The observations are consistent with a reaction scheme (5) in which a complex is formed reversibly from the monomer and a base; this complex may then decompose with evolution of carbon dioxide by routes involving base or acid catalysis. The polymerizations of the DL-leucine and DL-phenylalanine carbonic anhydrides are simple cases of this reaction mechanism in which the formation of the complex is the rate-determining step. This difference explains the lower order of these reactions in the initiator concentration, the absence of catalysis, and also the observation that unlike the formation of polysarcosine these polymerizations have a positive temperature coefficient. When the dimethylamide of an amino-acid is used as initiator the first stage of the reaction is faster than the subsequent stages involving polymers, since the initiator is a stronger base than the polymers. The kinetics for these reactions have been worked out, and shown to agree with experiment. The tertiary bases pyridine and quinoline when quite pure have been shown to be ineffective as initiators of the polymerization of sarcosine carbonic anhydride. Initiation by water and amino-acids is discussed. The molecular weights and molecular weight distribution are not affected by the presence of acid catalysts. The distribution for a reaction in which the first step has a rate different from that of the subsequent ones has been calculated.

scholarly journals A method to predict electric vehicles’ market penetration as well as its impact on energy saving and CO2 mitigation

2021 ◽  
Vol 104 (3) ◽  
pp. 003685042110402
Author(s):  
Shijun Fu ◽  
Hongji Fu
Keyword(s):  
Carbon Dioxide ◽  
Internal Combustion Engine ◽  
Energy Saving ◽  
Electric Vehicle ◽  
Electric Vehicles ◽  
Carbon Dioxide Emissions ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Market Penetration ◽  
Carbon Dioxide Mitigation

Introduction: Although forecasting electric vehicles’ growth in China was frequently reported in the literature, predicting electric vehicles market penetration as well as corresponding energy saving and carbon dioxide mitigation potential in a more suitable method is not well understood. Methods: This study chose the double species model to predict electric vehicles’ growth trajectory under mutually competitive conditions between electric vehicles and internal combustion engine vehicles. For comparison, it set two scenarios: with 200 and 300 vehicles per thousand persons at 2050. To give details on energy saving and carbon dioxide mitigation potential induced by electric vehicles’ market penetration, it further divided electric vehicles into five subgroups and internal combustion engine vehicles into seven subgroups, therein forming respective measurement formulas. Results: This paper solved the double species model and thus got its analytical formula. Then it employed the analytical formula to conduct an empirical study on electric vehicles market penetration in China from year 2010 to 2050. Under scenario 300, electric vehicles growth trajectory will emerge a quick growth stage during 2021–2035, thereafter keeping near invariant till 2050. Meanwhile, current internal combustion engine vehicles’ quick growth will continue up to 2027, then holding constant during 2028–2040, afterwards following a 10-year slowdown period. Scenario 200 has similar features, but a 2-year delay for electric vehicles and a 5-year lead time for internal combustion engine vehicles were found. On average, scenario 300 will save 114.4 Mt oil and 111.5 Mt carbon dioxide emissions, and scenario 200 will save 77.1 Mt oil and 73.4 Mt carbon dioxide emissions each year. Beyond 2032, annual 50.0% of road transport consumed oil and 18.6% of carbon dioxide emissions from this sector will be saved under scenario 300. Discussion: Compared with scenario 200, scenario 300 was more suitable to predict electric vehicle market penetration in China. In the short-term electric vehicle penetration only brings about trivial effects, while in the long-term it will contribute a lot to both energy security and carbon dioxide mitigation. The contribution of this article provided a more suitable methodology for predicting electric vehicle market penetration, simulated two coupled trajectories of electric vehicles and internal combustion engine vehicles, and discussed relative energy-saving and climate effects from 2010 to 2050.

scholarly journals Energy Efficiency, Emissions, Tribological Challenges and Fluid Requirements of Electrified Passenger Car Vehicles

2021 ◽  
Author(s):  
Robert Ian Taylor
Keyword(s):  
Energy Efficiency ◽  
Co2 Emissions ◽  
Electric Vehicles ◽  
Combustion Engine ◽  
Hybrid Vehicles ◽  
Cooling Systems ◽  
Engine Oils ◽  
Electricity System ◽  
Vehicle Transmissions ◽  
Made In

The motivations for the move to electrified vehicles are discussed with reference to their improved energy efficiency, their potential for lower CO2 emissions (if the electricity system is decarbonized), their lower (or zero) NOx/particulate matter (PM) tailpipe emissions, and the lower overall costs for owners. Some of the assumptions made in life-cycle CO2 emissions calculations are discussed and the effect of these assumptions on the CO2 benefits of electric vehicles are made clear. A number of new tribological challenges have emerged, particularly for hybrid vehicles that have both a conventional internal combustion engine and a battery, such as the need to protect against the much greater number of stop-starts that the engine will have during its lifetime. In addition, new lubricants are required for electric vehicle transmissions systems. Although full battery electric vehicles (BEVs) will not require engine oils (as there is no engine) they will require a system to cool the batteries – alternative cooling systems are discussed, and where these are fluid based, the specific fluid requirements are outlined.

Sign in / Sign up

Export Citation Format

Share Document