scholarly journals The Effectiveness of Automated Sonic Bloom Method in An IoT-Based Hydroponic System

Author(s):  
Seli Suhesti ◽  
Aji Gautama Putrada ◽  
Rizka Reza Pahlevi

One of the solutions for food security is planting using hydroponic method and to increase productivity and help hydroponic grow faster and facilitate in monitoring hydroponic growth, sonic bloom and Internet of Things (IoT) are two technologies that can be used. However, in previous studies, the two systems have not been interconnected. The aim of this study is to evaluate the effectiveness of the combination of the two systems mentioned, hence creating an automated sonic bloom method in an IoT-based hydroponic system. To test the proposed method, this system is implemented with bok choi as the hydroponic plant using the DFT technique. The automated sonic bloom is embedded to the IoT system with DF Player Mini module, RTC module, and speakers. The evaluation is done by comparing growth parameters and the crop parameters. The results show that the system with sonic bloom produces fresh weight of 0,44-0,56 g and dry weight of 0,21–0,33 g. The mentioned results are superior to the system without sonic bloom, where fresh weight is 0,17–0,25 g and dry weight is 0,08–0,13 g. It can be concluded that the IoT-based sonic bloom system is effective in increasing the growth rate and hydroponic production rate.

Toxics ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 182
Author(s):  
Ruchi Bansal ◽  
Swati Priya ◽  
Harsh Kumar Dikshit ◽  
Sherry Rachel Jacob ◽  
Mahesh Rao ◽  
...  

Cadmium (Cd) is a hazardous heavy metal, toxic to our ecosystem even at low concentrations. Cd stress negatively affects plant growth and development by triggering oxidative stress. Limited information is available on the role of iron (Fe) in ameliorating Cd stress tolerance in legumes. This study assessed the effect of Cd stress in two lentil (Lens culinaris Medik.) varieties differing in seed Fe concentration (L4717 (Fe-biofortified) and JL3) under controlled conditions. Six biochemical traits, five growth parameters, and Cd uptake were recorded at the seedling stage (21 days after sowing) in the studied genotypes grown under controlled conditions at two levels (100 μM and 200 μM) of cadmium chloride (CdCl2). The studied traits revealed significant genotype, treatment, and genotype × treatment interactions. Cd-induced oxidative damage led to the accumulation of hydrogen peroxide (H2O2) and malondialdehyde in both genotypes. JL3 accumulated 77.1% more H2O2 and 75% more lipid peroxidation products than L4717 at the high Cd level. Antioxidant enzyme activities increased in response to Cd stress, with significant genotype, treatment, and genotype × treatment interactions (p < 0.01). L4717 had remarkably higher catalase (40.5%), peroxidase (43.9%), superoxide dismutase (31.7%), and glutathione reductase (47.3%) activities than JL3 under high Cd conditions. In addition, L4717 sustained better growth in terms of fresh weight and dry weight than JL3 under stress. JL3 exhibited high Cd uptake (14.87 mg g−1 fresh weight) compared to L4717 (7.32 mg g−1 fresh weight). The study concluded that the Fe-biofortified lentil genotype L4717 exhibited Cd tolerance by inciting an efficient antioxidative response to Cd toxicity. Further studies are required to elucidate the possibility of seed Fe content as a surrogacy trait for Cd tolerance.


Author(s):  
Mahmoud Ahmed Touny El-Dabaa ◽  
Hassan Abd-El-Khair

Abstract Background Orobanche crenata is an obligate root parasite belonging to Orbanchaceae. Broomrape causes great damage to the faba bean. Several attempts were applied for controlling parasitic weeds. So, the aim of this work is to study the application of Trichoderma spp. as well as three rhizobacteria species in comparison to herbicidal effect of Glyphosate (Glialka 48% WSC) for controlling broomrape infesting faba bean (Vicia faba). Materials and methods Three pot experiments were carried out in the greenhouse of the National Research Centre, Dokki, Giza, Egypt during two successive winter seasons. Trichoderma inocula were adjusted to 3.6 × 108 propagules/ml and the bacterium inocula were adjusted at 107–109 colony-forming unit (CFU)/ml. All treatments were applied, before 1 week of sowing, at rate of 50 ml per pot in experiments I and II, while 100 ml per pot in experiment III. Results Trichoderma spp. (T. harzianum, T. viride and T. vierns) as well as three rhizobacteria species (Pseudomonas fluorescens, Bacillus subtilis and Bacillus pumilus) enhanced the growth parameters in faba bean plants, i.e. shoot length, shoot fresh weight, shoot dry weight and leaf number in the first experiment when applied without O. crenata infection. In the second experiment, all bio-control could protect plants against O. crenata infection, where it had better juvenile number reduction, than glyphosate after 2 months of application. Both B. subtilis and B. pumilus had the highest reduction to juvenile fresh weight, while their effect was equal to herbicide for juvenile dry weight, respectively. The bio-control agents had high effects until the 4th month, but it was less than that of the herbicide. In experiment III, the bio-control agents could highly reduce the juvenile parameters after 2 months, as well as juvenile fresh weight and juvenile dry weight after 4 months, than the herbicide, respectively. The bio-control agents were effective until 6 months, but less than the herbicide effect. All bio-control treatments highly increased the plant growth parameters, than the herbicide. Conclusion The application of Trichoderma spp. as well as rhizobacteria species could play an important role in controlling broomrape in faba bean as a natural bioherbicide.


2020 ◽  
Vol 11 (1) ◽  
pp. 25
Author(s):  
AHMAD TAOFIK ◽  
SOFIYA HASANI ◽  
AYU CAHYANINGTYAS ◽  
BUDY FRASETYA

The paitan plant contains allelopathic compounds for other plants so that the utilize of paitan plant as a source of liquid organic fertilizer (LOF) has not been widely applied. This research aimed to study the interaction between LOF dosage and appropriate application method of LOF to increase the growth of kailan plants. The research conducted at experimental garden of UIN Bandung from June-August 2016. The experimental design was a completely randomized design with two factors and replicated four times. The first factor was application methods (A), i.e. a1=direct application to the soil, and a2= spraying. The second factor was LOF dosage (T), i.e. t0: 0 ml plant-1, t1: 20 ml plant-1, t2: 40 ml plant-1, t3: 60 ml plant-1, t4: 80 ml plant-1. The growth parameters observed i.e. plant height (14, 21, 28, 35 and 42 Day after Transplanting (DAT)), leaf area 42 DAT, plant dry weight 42 DAT, and plant fresh weight 42 DAT. The data then analyzed with analysis of variance at a significant level of 5%. If the analysis of variance was significant, the Duncan multiple range test was used at α=5%. The research results showed there was no interaction between method of application with a various dosage of paitan LOF to all of the growth parameters. The application paitan LOF showed similar growth in terms of plant height, leaf area, plant dry, and plant fresh weight. The application method of paitan LOF direct to the soil or spraying to leaves can not increase kailan plant growth.


Sensors ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 6501
Author(s):  
Mohammad Ajlouni ◽  
Audrey Kruse ◽  
Jorge A. Condori-Apfata ◽  
Maria Valderrama Valencia ◽  
Chris Hoagland ◽  
...  

Crop growth analysis is used for the assessment of crop yield potential and stress tolerance. Capturing continuous plant growth has been a goal since the early 20th century; however, this requires a large number of replicates and multiple destructive measurements. The use of machine vision techniques holds promise as a fast, reliable, and non-destructive method to analyze crop growth based on surrogates for plant traits and growth parameters. We used machine vision to infer plant size along with destructive measurements at multiple time points to analyze growth parameters of spring wheat genotypes. We measured side-projected area by machine vision and RGB imaging. Three traits, i.e., biomass (BIO), leaf dry weight (LDW), and leaf area (LA), were measured using low-throughput techniques. However, RGB imaging was used to produce side projected area (SPA) as the high throughput trait. Significant effects of time point and genotype on BIO, LDW, LA, and SPA were observed. SPA was a robust predictor of leaf area, leaf dry weight, and biomass. Relative growth rate estimated using SPA was a robust predictor of the relative growth rate measured using biomass and leaf dry weight. Large numbers of entries can be assessed by this method for genetic mapping projects to produce a continuous growth curve with fewer replicates.


1990 ◽  
Vol 122 (6) ◽  
pp. 1177-1186 ◽  
Author(s):  
Y.S. Xie ◽  
J.T. Arnason ◽  
B.J.R. Philogène ◽  
J.D.H. Lambert ◽  
J. Atkinson ◽  
...  

Abstract2,4-Dihydroxy-7-methoxy-1,4-benzoxazin-3-one (DIMBOA), the major hydroxamic acid present in corn root, was studied for its effects on western corn rootworm, Diabrotica virgifera virgifera (LeConte). Exogenously applied DIMBOA caused mortality in western corn rootworm larvae feeding on fresh corn roots. The LC50 (lethal concentration for 50% mortality) value (fiducial limits) was 153 ppm (108–209) and the LC90 value was 917 ppm (560–2297). The deleterious effects of DIMBOA on western corn rootworm larvae possibly are due to both feeding deterrence and toxicity. In a replicated pot trial during two growing seasons, two corn lines developed by Agriculture Canada from CIMMYT collections, ITR 3872 with high DIMBOA content in roots, and NTR-2 Ger. 4042 with low DIMBOA content in roots, were evaluated for resistance to western corn rootworm larvae. The results indicated that the high DIMBOA line (but not the low DIMBOA line) stressed western corn rootworm larvae to produce inferior adults based on the measurement of adult emergence number, adult weight, and adult head-capsule width. The effect of western corn rootworm on both corn lines with different DIMBOA levels was measured based on plant growth parameters including plant height, stem thickness, plant fresh weight, root fresh weight, plant dry weight, and root dry weight. ITR 3872 (high DIMBOA) showed significantly less damage than NTR-2 Ger. 4042 (low DIMBOA) in almost all plant parameters measured. The results suggest that DIMBOA may in some instances contribute to the resistance of corn to western corn rootworm larvae.


2013 ◽  
Vol 5 (4) ◽  
pp. 508-512
Author(s):  
Gideon Olarewaju OKUNLOLA ◽  
Adekunle Ajayi ADELUSI

The experiment was carried out to determine the effects of heat stress on some growth parameters like shoot height, leaf area, fresh weight, dry weight as well as the accumulation of chlorophylls in Carica papaya. Seedlings of C. papaya were exposed to prior heat stress at 40 °C. A group of plants was placed in a Gallenkamp oven for four hours; another group of plants was placed in the oven for eight hours while the third group of plants was placed in a dark cupboard for the period of eight hours. Sampling was carried out at weekly intervals starting from seven days after treatment. Plants were randomly picked from each of the three treatments. Three replicates were used for each parameter. The results obtained from the study showed that there was an increment in the shoot height, leaf area, fresh weight and dry weight from the beginning to the end of the experimental period. However, the accumulation of chlorophylls did not follow a particular pattern. The analysis of variance carried out on the data obtained showed that heat stress had a significant effect on the petiole length, shoot height, leaf length, leaf width, leaf area, fresh weight and dry weight. Heat stress, however, did not produce a significant effect on the accumulation of chlorophylls a and b and total chlorophyll.


1985 ◽  
Vol 65 (3) ◽  
pp. 797-801 ◽  
Author(s):  
A. LIPTAY

The spindliness of tomato transplants grown at high densities in a greenhouse was reduced by an ethephon spray or intermittent vibration of the seedlings with air movement. Either treatment reduced the following growth parameters: plant height, height-to-stem-diameter ratio, stem diameter, fresh weight, and dry weight. One ethephon spray alone reduced the height and improved the stalkiness of the seedling. Vibration of the plants with air movement had an even greater height-reduction effect while a combination of the two treatments was the most effective in producing the stalkiest transplants.Key words: Lycopersicon esculentum, plant height, stem diameter, tomato, growth regulator


2016 ◽  
Vol 75 (2) ◽  
Author(s):  
Happy WIDIASTUTI ◽  
. TRI-PANJI

SummaryThe utilization of lignocellulolitic emptyfruit-bunches of oil-palm (EFBOP) material asstraw mushroom (Volvariella volvacea) mediacould produce short chain organic carbon andnutrients which may be available for growth ofplant. This research was aimed to determine theeffect of spent mushroom media amendmentderived from empty fruit bunches of oil palm(SMEB) as organic fertilizer on the growth andnutrient uptake of oil palm seedling. Theexperiment was conducted at greenhouse usingacid soil. Oil palm seedling was grown in 60 x 50cm polybags. The experiment was carried out toexamine 20 treatments i.e. combinations of fourlevel of SMEB (0, 25%, 50%, and 75% w/w) andfive dosages of conventional fertilizer (0, 25%,50%, 75%, and 100%) recommended dosages.The experiment was conducted using completerandomized design with factorial type. Theresearch showed that the amendment of SMEB atthe level of 25% could increase the height ofseedling, fresh weight of root, stem, and seedlingsas well as dry weight of oil palm stem. However,for leaf dry weight, a higher addition of SMEB upto 50% was needed. Fertilizing at 25% ofrecommended dosage could increase the seedlingheight, fresh weight of stem and leaf while forseedling fresh weight and leaf number, higheraddition of fertilizer up to 50% was needed.Significantly higher uptake of K and Mg wasobserved on the amendment of 75% of SMEB.The higher addition of SMEB (up to 75% w/w)did not decrease any growth parameters andnutrient uptake. However, the addition of 100%of recommended chemical fertilizer tended todecrease various growth parameters and uptakeof N, P, K, and Mg of oil palm seedling.RingkasanPenggunaan bahan lignoselulosa sebagaimedium jamur merang (Volvariella volvacea)diketahui dapat menghasilkan senyawa karbonrantai pendek demikian pula hara tersedia,sehingga diduga bahan ini dapat digunakansebagai pupuk organik untuk tanaman. Penelitiandilakukan untuk mengetahui pengaruh pemberiantandan kosong kelapa sawit (TKKS) sisa mediumjamur merang (TKSJ) terhadap pertumbuhan danserapan hara bibit kelapa sawit. Percobaandilakukan di rumah kaca menggunakan tanahbereaksi masam. TKKS sisa medium jamurmerang (TKSJ) sesuai dosis perlakuan dicampurdengan tanah dan selanjutnya bibit kelapa sawitditanam di polibag berukuran 60 x 50 cm.Percobaan dilakukan untuk menguji 20 perlakuanyang merupakan kombinasi empat tingkat TKSJ(0, 25%, 50% dan 75% b/b) dan lima dosis pupukkonvensional (0, 25%, 50%, 75% dan 100%)dosis rekomendasi. Percobaan dilakukan meng-gunakan rancangan acak lengkap dengan polafaktorial. Hasil percobaan menunjukkan bahwapemberian TKSJ pada tingkat 25% dapatmeningkatkan tinggi bibit, bobot basah akar,batang, dan bibit serta bobot kering batangkelapa sawit. Namun, untuk peubah bobot keringdaun diperlukan pemberian TKSJ yang lebihtinggi yaitu 50%. Pemupukan pada dosis 25%rekomendasi meningkatkan tinggi, bobot basahbatang dan daun sedangkan untuk jumlah daundan bobot basah bibit diperlukan dosis pupuk50%. Serapan hara K dan Mg nyata lebih tinggipada pemberian 75% TKSJ. Pemberian TKSJpada jumlah yang tinggi (hingga 75% b/b) tidakmenyebabkan penurunan berbagai peubah per-tumbuhan dan serapan hara, namun pemberianpupuk 100% rekomendasi cenderung menurun-kan berbagai peubah pertumbuhan dan serapanhara N, P, K, dan Mg bibit kelapa sawit.


HortScience ◽  
1994 ◽  
Vol 29 (7) ◽  
pp. 731c-731
Author(s):  
Pauline P. David ◽  
Audrey A. Trotman ◽  
Desmond G. Mortley

One of the major objective of growth analysis data is to provide a basic understanding of some of the mechanisms that affect plant growth. This study was initiated to evaluate the effects on several growth parameters when plants are grown in an NFT system. Vine cuttings (15 cm length) of the sweetpotato cultivar ``Georgia Jet” was grown in a closed NFT system for a period of 120 days. Nutrient was supplied in a modified half-strength Hoagland's solution with a N:K ratio of 1:2.4. Destructive harvesting of plants occurred at 14 day intervals at which time plants were separated into their various component parts and analyzed for dry weight accumulation, leaf area index, crop growth rate, relative growth rate and net assimilation rate. Results showed dry weight distribution within the plant had a linear response for all component part evaluated. Greatest contributors to total plant dry weight was stem followed by leaves, fibrous roots, buds and flowers. However, once storage root production occurred it contributed the largest percentage to total plant dry weight. LAI was optimum at 80 days after planting (DAP) while CGR and RGR fluctuated throughout the growing season. Initially NAR was higher in foliage than storage roots but declined once storage root enlargement began, suggesting a translocation of assimilates to storage root.


Sign in / Sign up

Export Citation Format

Share Document