scholarly journals Multicomponent Solid Fuel Production Technology Using Waste Water

2021 ◽  
Vol 64 (6) ◽  
pp. 525-537
Author(s):  
A. N. Pekhota ◽  
B. M. Khroustalev ◽  
Minh Phap Vu ◽  
V. N. Romaniuk ◽  
E. A. Pekhota ◽  
...  
Keyword(s):  
Sewage Sludge ◽  
Carbon Footprint ◽  
Solid Fuel ◽  
Carbon Dioxide Emissions ◽  
Modern Society ◽  
Hydrocarbon Fuel ◽  
Wastewater Sludge ◽  
Raw Material ◽  
Flow Diagram ◽  
Short Term Treatment

An assessment is given to the problems of urban wastewater sludge utilization in our country and abroad, with determination of formation and usage level. Global trends in the reduction of carbon dioxide emissions exacerbate the urgency of solving the designated tasks. At the same time, recently, in connection with the EU’s plans to introduce a cross-border carbon levy, it has become necessary to reduce the carbon footprint from burning traditional fuels, which is an urgent problem of modern society. One of the directions that provide a solution to this problem is the replacement of part of the hydrocarbon fuel by the consumption of multicomponent solid fuel based on the use of combustible waste that is part of the multicomponent fuel. This solid fuel can be used to meet the needs of small consumers, for example, in the autumn-summer period to generate a drying agent for the preparation of grain on the threshing-floor, in small boiler houses, in sand drying plants of locomotive depots, heat installations of hangars and workshops, as well as in other heat-generating installations operating on solid fuels. At the same time, solving the problem of reducing the carbon footprint for Belarus is closely related to another urgent task – reducing the energy component of industrial products and the environmental consequences of storing accumulated and generated waste. The paper presents the results of joint scientific research in the field of application of modern technologies and equipment using electrohydraulic treatment to reduce and minimize the level of anthropogenic and polluting substances in wastewater sludge. The described technological equipment, technology and post-treatment modes reduce the content of harmful substances in the wastewater sludge composition even with short-term treatment. An assessment of the effectiveness of the developed technology for the use of sewage sludge is given, using the method of wet multicomponent briquetting to obtain a multicomponent fuel. The presented process flow diagram of multicomponent briquetting using sewage sludge and plant-wood waste directly shows the undeniable advantages of using watered wastewater sludge as a raw material for the production of solid fuel. At the same time, the optimally selected ratio of components and moisture content of the briquetted composition solves a number of technologically difficult problems that cannot be realized using traditional briquetting technologies. The presented data of the conducted research and the developed technology make it possible to expand the area of using wastewater sludge as a secondary renewable material resource.

scholarly journals Bio-Energetics and Utilization of Greenhouse Gases

10.12737/4938 ◽  
2014 ◽  
Vol 3 (3) ◽  
pp. 25-27 ◽  
Author(s):  
Хазанов ◽  
Grigoriy Khazanov ◽  
Курин ◽  
Valeriy Kurin ◽  
Апарушкина ◽  
...  
Keyword(s):  
Power Plant ◽  
Greenhouse Gases ◽  
Solid Fuel ◽  
Thermal Power Plant ◽  
Thermal Power ◽  
Hydrocarbon Fuel ◽  
Raw Material ◽  
Biofuel Production ◽  
Algae Biomass ◽  
Microalgae Biomass

The paper considers environmental problems of hydrocarbon fuel usage. The assessment of the area necessary for cultivation of algae biomass and its further use as solid fuel at thermal power plant has been carried out. Expediency of production of microalgae biomass in the process of photosynthesisas raw material for biofuel production is revealed.

scholarly journals Life-Cycle Assessment of Carbon Footprint of Bike-Share and Bus Systems in Campus Transit

2020 ◽  
Vol 13 (1) ◽  
pp. 158
Author(s):  
Sishen Wang ◽  
Hao Wang ◽  
Pengyu Xie ◽  
Xiaodan Chen
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Carbon Footprint ◽  
Co2 Emission ◽  
Raw Material ◽  
Transit System ◽  
Two Systems ◽  
Bus System ◽  
Bike Share

Low-carbon transport system is desired for sustainable cities. The study aims to compare carbon footprint of two transportation modes in campus transit, bus and bike-share systems, using life-cycle assessment (LCA). A case study was conducted for the four-campus (College Ave, Cook/Douglass, Busch, Livingston) transit system at Rutgers University (New Brunswick, NJ). The life-cycle of two systems were disaggregated into four stages, namely, raw material acquisition and manufacture, transportation, operation and maintenance, and end-of-life. Three uncertain factors—fossil fuel type, number of bikes provided, and bus ridership—were set as variables for sensitivity analysis. Normalization method was used in two impact categories to analyze and compare environmental impacts. The results show that the majority of CO2 emission and energy consumption comes from the raw material stage (extraction and upstream production) of the bike-share system and the operation stage of the campus bus system. The CO2 emission and energy consumption of the current campus bus system are 46 and 13 times of that of the proposed bike-share system, respectively. Three uncertain factors can influence the results: (1) biodiesel can significantly reduce CO2 emission and energy consumption of the current campus bus system; (2) the increased number of bikes increases CO2 emission of the bike-share system; (3) the increase of bus ridership may result in similar impact between two systems. Finally, an alternative hybrid transit system is proposed that uses campus buses to connect four campuses and creates a bike-share system to satisfy travel demands within each campus. The hybrid system reaches the most environmentally friendly state when 70% passenger-miles provided by campus bus and 30% by bike-share system. Further research is needed to consider the uncertainty of biking behavior and travel choice in LCA. Applicable recommendations include increasing ridership of campus buses and building a bike-share in campus to support the current campus bus system. Other strategies such as increasing parking fees and improving biking environment can also be implemented to reduce automobile usage and encourage biking behavior.

Experimental Parameter Study on Synthesis Gas Production by Steam-Oxygen Fluidized Bed Gasification of Sewage Sludge

2021 ◽  
Vol 11 (2) ◽  
pp. 579
Author(s):  
Max Schmid ◽  
Selina Hafner ◽  
Günter Scheffknecht
Keyword(s):  
Sewage Sludge ◽  
Fluidized Bed ◽  
Experimental Parameter ◽  
Space Velocity ◽  
Phosphate Fertilizer ◽  
Gas Production ◽  
Raw Material ◽  
Parameter Study ◽  
Syngas Production ◽  
Fuels And Chemicals

The conversion of biogenic residues to fuels and chemicals via gasification and synthesis processes is a promising pathway to replace fossil carbon. In this study, the focus is set on sewage sludge gasification for syngas production. Experiments were carried out in a 20 kW fuel input bubbling fluidized bed facility with steam and oxygen as gasification agent. In-situ produced sewage sludge ash was used as bed material. The sensitivity of the key operation parameters gasifier temperature, oxygen ratio, steam to carbon ratio, and the space velocity on the syngas composition (H2, CO, CO2, CH4, CxHy, H2S, COS, NH3, and tars) was determined. The results show that the produced syngas has high H2 and CO concentrations of up to 0.37 m3 m−3 and 0.18 m3 m−3, respectively, and is thus suitable for synthesis of fuels and chemicals. By adjusting the steam to carbon ratio, the syngas’ H2 to CO ratio can be purposely tailored by the water gas shift reaction for various synthesis products, e.g., synthetic natural gas (H2/CO = 3) or Fischer–Tropsch products (H2/CO = 2). Also, the composition and yields of fly ash and bed ash are presented. Through the gasification process, the cadmium and mercury contents of the bed ash were drastically reduced. The ash is suitable as secondary raw material for phosphorous or phosphate fertilizer production. Overall, a broad database was generated that can be used for process simulation and process design.

scholarly journals The Influence of Sewage Sludge Content and Sintering Temperature on Selected Properties of Lightweight Expanded Clay Aggregate

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3363
Author(s):  
Jolanta Latosińska ◽  
Maria Żygadło ◽  
Przemysław Czapik
Keyword(s):  
Sewage Sludge ◽  
Water Absorption ◽  
Apparent Density ◽  
Environmental Sustainability ◽  
Sintering Temperature ◽  
Total Porosity ◽  
Raw Material ◽  
Closed Porosity ◽  
Specific Density ◽  
Sustainability Principles

Wastewater treatment processes produce sewage sludge (SS), which, in line with environmental sustainability principles, can be a valuable source of matter in the production of lightweight expanded clay aggregate (LECA). The literature on the influence of SS content and sintering temperature on the properties of LECA is scarce. This paper aims to statistically evaluate the effects of SS content and sintering temperature on LECA physical properties. Total porosity, pore volume, and apparent density were determined with the use of a density analyzer. A helium pycnometer was utilized to determine the specific density. Closed porosity was calculated. The test results demonstrated a statistically significant influence of the SS content on the specific density and water absorption of LECA. The sintering temperature had a significant effect on the specific density, apparent density, total porosity, closed porosity, total volume of pores, and water absorption. It was proved that a broad range of the SS content is admissible in the raw material mass for the production of LECA.

Modeling of Carbon Dioxide Measurement on Cement Plants

2012 ◽  
Vol 610-613 ◽  
pp. 2120-2128 ◽  
Author(s):  
Jun Xia Peng ◽  
Liang Huang ◽  
Yu Bo Zhao ◽  
Pan Chen ◽  
Lu Zeng ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Carbon Footprint ◽  
Carbon Dioxide Emissions ◽  
Co2 Emission ◽  
Firing Process ◽  
Input Output ◽  
Carbon Dioxide Measurement ◽  
Key Steps ◽  
Furnace Slag ◽  
Reducing Co2 Emission

Input-output model on cement plants were established. Carbon dioxide emissions of key steps and carbon footprint of products were calculated and predicted using the input-output model. The results showed that CO2 emission in the plant (the production of the plant is 1320000t a year) reached 910000 t a year and CO2 emission per ton product is 0.689 ton. Over 80% of the total CO2 was emitted during the process of firing，so the firing process is the key step for reducing CO2 emission in the cement plant. Carbon footprint of three kinds of cement products including ordinary portland cement, portland pozzolan cement and portland blast furnace slag cement are 0.76, 0.59, 0.72 respectively.

scholarly journals Looking for Options to Sustainably Fixate Nitrogen. Are Molecular Metal Oxides Catalysts a Viable Avenue?

2021 ◽  
Vol 9 ◽  
Author(s):  
Rebeca González-Cabaleiro ◽  
Jake A. Thompson ◽  
Laia Vilà-Nadal
Keyword(s):  
Metal Oxides ◽  
Carbon Dioxide Emissions ◽  
Triple Bond ◽  
Industrial Process ◽  
Modern Society ◽  
Small Scale ◽  
Scale Production ◽  
Ammonia Production ◽  
Force System ◽  
Bosch Process

Fast and reliable industrial production of ammonia (NH3) is fundamentally sustaining modern society. Since the early 20th Century, NH3 has been synthesized via the Haber–Bosch process, running at conditions of around 350–500°C and 100–200 times atmospheric pressure (15–20 MPa). Industrial ammonia production is currently the most energy-demanding chemical process worldwide and contributes up to 3% to the global carbon dioxide emissions. Therefore, the development of more energy-efficient pathways for ammonia production is an attractive proposition. Over the past 20 years, scientists have imagined the possibility of developing a milder synthesis of ammonia by mimicking the nitrogenase enzyme, which fixes nitrogen from the air at ambient temperatures and pressures to feed leguminous plants. To do this, we propose the use of highly reconfigurable molecular metal oxides or polyoxometalates (POMs). Our proposal is an informed design of the polyoxometalate after exploring the catabolic pathways that cyanobacteria use to fix N2 in nature, which are a different route than the one followed by the Haber–Bosch process. Meanwhile, the industrial process is a “brute force” system towards breaking the triple bond N-N, needing high pressure and high temperature to increase the rate of reaction, nature first links the protons to the N2 to later easier breaking of the triple bond at environmental temperature and pressure. Computational chemistry data on the stability of different polyoxometalates will guide us to decide the best design for a catalyst. Testing different functionalized molecular metal oxides as ammonia catalysts laboratory conditions will allow for a sustainable reactor design of small-scale production.

scholarly journals Regulatory and technological prerequisites of the use of sewage sludge for the production of organic fertilizers

2020 ◽  
pp. 162-170
Author(s):  
R. Edgecock ◽  
V. V. Bratishko ◽  
I. V. Zinchenko ◽  
S. H. Karpus ◽  
D. O. Milko ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Sewage Sludge ◽  
Municipal Wastewater ◽  
Raw Materials ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Raw Material ◽  
Organic Fertilizers ◽  
Mineral Fertilizers

Annotation Purpose. Summarize the regulatory and technological requirements for the production of organic (organo-mineral) fertilizers on the base of sewage sludge. Methods. Analysis and generalization of the requirements of regulatory documents on the management of organic waste and their use as raw materials for the production of organic fertilizers and soil improvers. Results. The current legislative, departmental and regulatory documentary base in Ukraine concerning the treatment of sediment resulting from biological sewage treatment at municipal wastewater treatment plants for its further use in agriculture as fertilizers is analysed. Indicators are identified and analysed to determine the possibility, feasibility, efficiency and scope of organic fertilizers produced using sewage sludge. The analysis of changes in the content of organic matter and total nitrogen in the sewage sludge during its storage at the sewage treatment plant sites is presented. The technological feasibility of using sludge of different shelf life in composting production has been determined. Conclusions 1. The regulatory framework of Ukraine contains a sufficiently complete list of indicators that should be met by organic raw materials (sewage sludge) for further use as organic fertilizers. Some of these indicators – bio security and heavy metals content – can be improved in the composting process of fertilizers. 2. Fresh sediment, as well as sediment accumulated in the last late autumn and winter periods, is of main value for use as a raw material in the production of organic fertilizers. 3. The use in the production of compost sludge stored on sludge sites for a period of half a year or more requires special control of the process of decontamination. In this case, it is advisable to use additional means of wastewater decontamination. Keywords: heavy metals, manure, humus, decontamination, composting, organic fertilizers, sewage sludge.

Sign in / Sign up

Export Citation Format

Share Document