High-Efficiency, High-Yield Pulsed Neutron Generators for the Well Logging Industry

Author(s):  
Juan Navarro ◽  
Weijun Guo
2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Yingfeng Yang ◽  
Hanze Ying ◽  
Zhixia Li ◽  
Jiang Wang ◽  
Yingying Chen ◽  
...  

AbstractMacrocycles are unique molecular structures extensively used in the design of catalysts, therapeutics and supramolecular assemblies. Among all reactions reported to date, systems that can produce macrocycles in high yield under high reaction concentrations are rare. Here we report the use of dynamic hindered urea bond (HUB) for the construction of urea macrocycles with very high efficiency. Mixing of equal molar diisocyanate and hindered diamine leads to formation of macrocycles with discrete structures in nearly quantitative yields under high concentration of reactants. The bulky N-tert-butyl plays key roles to facilitate the formation of macrocycles, providing not only the kinetic control due to the formation of the cyclization-promoting cis C = O/tert-butyl conformation, but also possibly the thermodynamic stabilization of macrocycles with weak association interactions. The bulky N-tert-butyl can be readily removed by acid to eliminate the dynamicity of HUB and stabilize the macrocycle structures.


Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 788
Author(s):  
Jinlin Mei ◽  
Aijun Duan ◽  
Xilong Wang

The traditional hydrothermal method to prepare zeolite will inevitably use a large amount of water as a solvent, which will lead to higher autogenous pressure, low efficiency, and wastewater pollution. The solvent-free method can be used to synthesize various types of zeolites by mechanical mixing, grinding, and heating of solid raw materials, which exhibits the apparent advantages of high yield, low pollution, and high efficiency. This review mainly introduces the development process of solvent-free synthesis, preparation of hierarchical zeolite, morphology control, synthesis mechanism and applications of solvent-free methods. It can be believed that solvent-free methods will become a research focus and have enormous industrial application potential.


2021 ◽  
Vol 7 (10) ◽  
pp. eabe8130
Author(s):  
Shangshang Chen ◽  
Xun Xiao ◽  
Hangyu Gu ◽  
Jinsong Huang

Perovskite-based electronic materials and devices such as perovskite solar cells (PSCs) have notoriously bad reproducibility, which greatly impedes both fundamental understanding of their intrinsic properties and real-world applications. Here, we report that organic iodide perovskite precursors can be oxidized to I2 even for carefully sealed precursor powders or solutions, which markedly deteriorates the performance and reproducibility of PSCs. Adding benzylhydrazine hydrochloride (BHC) as a reductant into degraded precursor solutions can effectively reduce the detrimental I2 back to I−, accompanied by a substantial reduction of I3−-induced charge traps in the films. BHC residuals in perovskite films further stabilize the PSCs under operation conditions. BHC improves the stabilized efficiency of the blade-coated p-i-n structure PSCs to a record value of 23.2% (22.62 ± 0.40% certified by National Renewable Energy Laboratory), and the high-efficiency devices have a very high yield. A stabilized aperture efficiency of 18.2% is also achieved on a 35.8-cm2 mini-module.


1983 ◽  
Vol 3 (6) ◽  
pp. 1123-1132
Author(s):  
Archibald S. Perkins ◽  
Paul T. Kirschmeier ◽  
Sebastiano Gattoni-Celli ◽  
I. Bernard Weinstein

We have developed a transfection vector for animal cells that contains long terminal repeat (LTR) sequences to promote expression. Plasmid p101/101, a derivative of plasmid pBR322 containing the complete Moloney murine sarcoma virus genome, was cut with restriction enzymes and religated so that both the 5′ and 3′ LTRs were retained and all but about 700 base pairs of the intervening viral sequences were removed. To test this vector, the Escherichia coli gene gpt was cloned into a unique Pst I site, between the two LTRs, with guanine and cytosine tailing, a method that can be generalized for insertion of any DNA segment into this vector. When DNA from recombinant plasmids in which the gpt gene was inserted in the same transcriptional polarity as the LTR sequences was transfected onto murine or rat fibroblast cultures, we obtained a high yield of Gpt + colonies. However, plasmid constructs with the gpt gene in the opposite polarity were virtually devoid of activity. With gpt in the proper orientation, restriction enzyme cuts within the LTRs or between the 5′ LTR and the gpt gene reduced transfection by more than 98%, whereas a cut between the gpt gene and the 3′ LTR gave an 80% reduction in activity. Thus, both 5′ and 3′ LTR sequences are essential for optimal gpt expression, although the 5′ LTR appears to play a more important role. When the LTR- gpt plasmid was transfected onto murine leukemia virus-infected mouse fibroblasts, we obtained evidence that RNA copies became pseudotyped into viral particles which could transfer the Gpt + phenotype into rodent cells with extremely high efficiency. This vector should prove useful for high-efficiency transduction of a variety of genes in mammalian cells.


Author(s):  
Udayakumar Veerabagu ◽  
Gowsika Jaikumar ◽  
Fushen Lu ◽  
Franck Quero

The 3 wt% CuI/BNNS catalyst exhibited high efficiency for C–H difluoromethylation reactions and enabled greener synthesis at high yields using cyrene as a solvent. Furthermore, the catalyst could be easily recovered and recycled for at least five cycles.


2005 ◽  
Vol 48 (spe2) ◽  
pp. 9-12 ◽  
Author(s):  
Priscilla Brunelli Pujatti ◽  
Carlos Jorge Rodrigues Simal ◽  
Raquel Gouvêa dos Santos

Technetium-99m (99mTc) has been the radionuclide of choice for nuclear medicine procedures and experimental research. Because of its optimal nuclear properties, 99mTc is suitable for high efficiency detection with the advantage of reduced radiological waste. Crotalus venom (CV) has been shown to reduce tumors in clinical studies and tissue distribution studies are very important for clinical use. The goal of this work was to obtain CV labeled with 99mTc which preserves its biological activity. After labeling, biological activity was assessed by hemolytic activity evaluation. Labeled and crude venom caused indirect hemolysis provided that the incubation medium contained an exogenous source of lecithin. High yield radiolabeled-CV was obtained and biological activity was preserved. The results suggest that 99mTc-CV can be a useful tool for biodistribution studies.


2021 ◽  
Author(s):  
Peili Shen ◽  
Dandan Niu ◽  
Xuelian Liu ◽  
Kangming Tian ◽  
Permaul Kugenthiren ◽  
...  

Abstract Highly efficient preparation of industrially important enzymes depends on development of the genetically stable and high-yield microbial cell factories, which is often a challengeable laboratory hard work. In aims to simplify strain development with high efficiency for enzyme overproduction, a new strategy based on chromosomal integration and amplification in Bacillus sp . was developed. A pair of plasmids, an integrated expression plasmid pUB'-Ex1 and a thermosensitive replicable plasmid pUB-MazF, were constructed. pUB'-Ex1 conditionally self-replicated in Bacillus sp . when the RepF in pUB-MazF expressed. pUB-MazF thermosensitively self-replicated in Bacillus sp . , which was easily cured from the host by inducing MazF expression with IPTG. Bacillus licheniformis BL-UBM that integrated with pUB-MazF was then transformed with pUB'-amyS derived from pUB'-Ex1 by in-frame cloning of amyS encoding a thermophilic α-amylase from Geobacillus stearothermophilus ATCC 31195. The transformant of B. licheniformis BL-UBM with pUB'-amyS was cultivated at 42 o C with the existence of 1 mmol/l IPTG and 500 μg/ml kanamycin and the recombinants with high α-amylase activities were selected. All tested recombinants were extremely high genetic stability. One of which, recombinant BLiS-002, carried five copies of amyS and produced the highest yield of α-amylase. It could yield 50,753 U/ml of α-amylase in a 50-l bioreactor. The strategy developed in this study is of application potential for convenient and quick strain development for industrially important enzyme overexpression.


2021 ◽  
Vol 303 ◽  
pp. 01028
Author(s):  
Chuanwei Zang ◽  
Miao Chen ◽  
Yang Chen ◽  
Xuean Zhuang ◽  
Chenming Zhai ◽  
...  

Fully mechanized top coal caving is a major high-yield and high-efficiency coal mining method for thick seam mining. At present, it is affected by the further popularization and application of fully mechanized caving mining because the recovery rate is limited. The research on the technology of fully mechanized top coal caving and transitional coal mining is crucial. This paper aims at the top coal recovery with the top coal of the fully mechanized caving face and the transitional frame at both ends of the working face. With the top roof structure model of the fully mechanized caving face, the numerical simulation and field measurement is used to compare the end coal caving. With caving coal or not, the destruction and migration rules of the top coal in the fully mechanized caving face are obtained. The study found that at the end of the transport trough, the maximum concentration factor of the support pressure in the coal is 2.35, and the maximum vertical displacement is 9.2cm. And at the end of the return air trough, the support pressure concentration factor is 3.53, and the maximum vertical displacement of the roof is 102cm. The above research reveals the law of the occurrence of the pressure and the movement of the top coal when caving the coal at the end, while ensuring the safe production and efficient mining of the coal mine.


MRS Advances ◽  
2019 ◽  
Vol 4 (3-4) ◽  
pp. 177-183
Author(s):  
Takashi Tsuji ◽  
Naoyuki Matsumoto ◽  
Hirokazu Takai ◽  
Shunsuke Sakurai ◽  
Don N. Futaba

ABSTRACTWe have demonstrated the high yield (∼900 μm) and highly single-wall selective (>95%) growth of carbon nanotube (CNT) forest using aluminium nitride (AlN) as a catalyst underlayer. Such high efficiency and single-wall selectivity have not been previously reported using this underlayer system. Evaluation with transmission electron microscopy showed that the average diameter of the grown carbon nanotubes was ∼3.0 nm, which is similar to those grown on alumina underlayers. In addition, characterization of the catalyst/underlayer system using atomic force microscopy and X-ray photoelectron spectroscopy suggests that neither Ostwald ripening along the surface nor catalyst subsurface diffusion into the AlN underlayer are severely occurring at the growth temperature, leading to the creation of the stable and dense small nanoparticle array to achieve an efficient growth of single-wall CNTs.


Sign in / Sign up

Export Citation Format

Share Document