Comparative Evaluation of Artificial Intelligence Models for Drilling Rate of Penetration Prediction

2021 ◽  
Author(s):  
Ololade Adetifa ◽  
Ibiye Iyalla ◽  
Kingsley Amadi
Keyword(s):  
Artificial Intelligence ◽  
Least Square ◽  
Coefficient Of Determination ◽  
Percentage Error ◽  
Support Vector ◽  
Artificial Intelligent ◽  
Rate Of Penetration ◽  
Drilling Data ◽  
Intelligent Models ◽  
Prediction Capability

Abstract Rate of penetration is an important parameter in drilling performance analysis. The accurate prediction of rate of penetration during well planning leads to a reduction in capital and operating costs which is vital given the recent downturn in oil prices. The industry is seen to embrace the use of novel technologies and artificial intelligence in its bid to be sustainable which is why this study focuses on the use of artificial intelligent models in predicting the rate of penetration. The predictive performance of three data-driven models [artificial neural network (ANN), extreme learning machine (ELM) and least-square support vector machine (LS-SVM)] were evaluated using actual drilling data based on three performance evaluation criteria [mean square error (MSE), coefficient of determination (R2) and average absolute percentage error (AAPE)]. The models were validated using the physics based Bourgoyne and Young's model. The results show that all three models performed to an acceptable level of accuracy based on the range of the actual drilling data because, although the ELM had the least MSE (1317.44) and the highest R2 (0.52 i.e. 52% prediction capability) the LS-SVM model had a smaller spread of predicted ROP when compared with the actual ROP and the ANN had the least AAPE (38.14). The results can be improved upon by optimizing the controllable predictors. Validation of the model's performance with the Bourgoyne and Young's model resulted in R2 of 0.29 or 29% prediction capability confirming that artificial intelligent models outperformed the physics-based model.

Fracture Pressure Prediction Using Surface Drilling Parameters by Artificial Intelligence Techniques

2020 ◽  
Vol 143 (3) ◽  
Author(s):  
Abdulmalek Ahmed ◽  
Salaheldin Elkatatny ◽  
Abdulwahab Ali
Keyword(s):  
Artificial Intelligence ◽  
Real Time ◽  
Coefficient Of Determination ◽  
Percentage Error ◽  
Support Vector ◽  
Optimal Model ◽  
Time Data ◽  
Fracture Pressure ◽  
Drilling Parameters ◽  
Drilling Operations

Abstract Several correlations are available to determine the fracture pressure, a vital property of a well, which is essential in the design of the drilling operations and preventing problems. Some of these correlations are based on the rock and formation characteristics, and others are based on log data. In this study, five artificial intelligence (AI) techniques predicting fracture pressure were developed and compared with the existing empirical correlations to select the optimal model. Real-time data of surface drilling parameters from one well were obtained using real-time drilling sensors. The five employed methods of AI are functional networks (FN), artificial neural networks (ANN), support vector machine (SVM), radial basis function (RBF), and fuzzy logic (FL). More than 3990 datasets were used to build the five AI models by dividing the data into training and testing sets. A comparison between the results of the five AI techniques and the empirical fracture correlations, such as the Eaton model, Matthews and Kelly model, and Pennebaker model, was also performed. The results reveal that AI techniques outperform the three fracture pressure correlations based on their high accuracy, represented by the low average absolute percentage error (AAPE) and a high coefficient of determination (R2). Compared with empirical models, the AI techniques have the advantage of requiring less data, only surface drilling parameters, which can be conveniently obtained from any well. Additionally, a new fracture pressure correlation was developed based on ANN, which predicts the fracture pressure with high precision (R2 = 0.99 and AAPE = 0.094%).

Application of Artificial Intelligence Techniques to Estimate the Static Poisson's Ratio Based on Wireline Log Data

2018 ◽  
Vol 140 (7) ◽  
Author(s):  
Salaheldin Elkatatny
Keyword(s):  
Artificial Intelligence ◽  
Poisson’S Ratio ◽  
Carbonate Reservoirs ◽  
Poisson's Ratio ◽  
Coefficient Of Determination ◽  
Percentage Error ◽  
Support Vector ◽  
Cement Slurry ◽  
Inference System ◽  
Log Data

Static Poisson's ratio (νstatic) is a key factor in determine the in-situ stresses in the reservoir section. νstatic is used to calculate the minimum horizontal stress which will affect the design of the optimum mud widow and the density of cement slurry while drilling. In addition, it also affects the design of the casing setting depth. νstatic is very important for field development and the incorrect estimation of it may lead to heavy investment decisions. νstatic can be measured in the lab using a real reservoir cores. The laboratory measurements of νstatic will take long time and also will increase the overall cost. The goal of this study is to develop accurate models for predicting νstatic for carbonate reservoirs based on wireline log data using artificial intelligence (AI) techniques. More than 610 core and log data points from carbonate reservoirs were used to train and validate the AI models. The more accurate AI model will be used to generate a new correlation for calculating the νstatic. The developed artificial neural network (ANN) model yielded more accurate results for estimating νstatic based on log data; sonic travel times and bulk density compared to adaptive neuro fuzzy inference system (ANFIS) and support vector machine (SVM) methods. The developed empirical equation for νstatic gave a coefficient of determination (R2) of 0.97 and an average absolute percentage error (AAPE) of 1.13%. The developed technique will help geomechanical engineers to estimate a complete trend of νstatic without the need for coring and laboratory work and hence will reduce the overall cost of the well.

Hybrid artificial intelligence-based inference models for accurately predicting dam body displacements: A case study of the Fei Tsui dam

2021 ◽  
pp. 147592172110441
Author(s):  
Min-Yuan Cheng ◽  
Minh-Tu Cao ◽  
I-Feng Huang
Keyword(s):  
Artificial Intelligence ◽  
Real Data ◽  
Influential Factors ◽  
Machine Learning Techniques ◽  
Coefficient Of Determination ◽  
Percentage Error ◽  
Support Vector ◽  
Prediction Errors ◽  
Operation Condition ◽  
Inference Models

Surveillance is a critical activity in monitoring the operation condition and safety of dams. This study reviewed the historical monitoring data of the Fei Tsui dam to determine possible influential factors for the dam body displacement and then evaluated the influencing degree of these factors by using correlation analysis. Thus, the key influential factors were identified objectively and further chosen as the input variables for numerous artificial intelligence (AI)-based inference models, including single machine learning techniques (support vector machine (SVM), artificial neural networks) and hybrid AI models. The models were trained and tested with 4722 real data retrieved in 11 years from the monitoring devices installed on elements of the dam, and then generated their respective inferred dam body displacement values. The results revealed that the adaptive time-dependent evolutionary least squares SVM model had the greatest performance by providing the lowest values of prediction errors in terms of mean absolute percentage error (MAPE = 8.14%), root mean square error (RMSE = 1.08 cm), and coefficient of determination (R = 0.993). The analysis results endorsed that the hybrid AI model could be an efficient tool to early produce accurate warnings of the dam displacements.

scholarly journals Predicting Ink Transfer Rate of 3D Additive Printing Using EGBO Optimized Least Squares Support Vector Machine Model

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Shengpu Li ◽  
Yize Sun
Keyword(s):  
Support Vector Machine ◽  
Prediction Model ◽  
Least Squares ◽  
Transfer Rate ◽  
Coefficient Of Determination ◽  
Percentage Error ◽  
Support Vector ◽  
Experimental Sample ◽  
Machine Model ◽  
Ink Transfer

Ink transfer rate (ITR) is a reference index to measure the quality of 3D additive printing. In this study, an ink transfer rate prediction model is proposed by applying the least squares support vector machine (LSSVM). In addition, enhanced garden balsam optimization (EGBO) is used for selection and optimization of hyperparameters that are embedded in the LSSVM model. 102 sets of experimental sample data have been collected from the production line to train and test the hybrid prediction model. Experimental results show that the coefficient of determination (R2) for the introduced model is equal to 0.8476, the root-mean-square error (RMSE) is 6.6 × 10 (−3), and the mean absolute percentage error (MAPE) is 1.6502 × 10 (−3) for the ink transfer rate of 3D additive printing.

scholarly journals Machine Learning for Sensorless Temperature Estimation of a BLDC Motor

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4655
Author(s):  
Dariusz Czerwinski ◽  
Jakub Gęca ◽  
Krzysztof Kolano
Keyword(s):  
Machine Learning ◽  
Temperature Measurement ◽  
Stochastic Gradient Descent ◽  
Estimation Accuracy ◽  
Coefficient Of Determination ◽  
Percentage Error ◽  
Support Vector ◽  
Bldc Motor ◽  
Temperature Estimation ◽  
Motor Operation

In this article, the authors propose two models for BLDC motor winding temperature estimation using machine learning methods. For the purposes of the research, measurements were made for over 160 h of motor operation, and then, they were preprocessed. The algorithms of linear regression, ElasticNet, stochastic gradient descent regressor, support vector machines, decision trees, and AdaBoost were used for predictive modeling. The ability of the models to generalize was achieved by hyperparameter tuning with the use of cross-validation. The conducted research led to promising results of the winding temperature estimation accuracy. In the case of sensorless temperature prediction (model 1), the mean absolute percentage error MAPE was below 4.5% and the coefficient of determination R2 was above 0.909. In addition, the extension of the model with the temperature measurement on the casing (model 2) allowed reducing the error value to about 1% and increasing R2 to 0.990. The results obtained for the first proposed model show that the overheating protection of the motor can be ensured without direct temperature measurement. In addition, the introduction of a simple casing temperature measurement system allows for an estimation with accuracy suitable for compensating the motor output torque changes related to temperature.

scholarly journals Multi-State Load Demand Forecasting Using Hybridized Support Vector Regression Integrated with Optimal Design of Off-Grid Energy Systems—A Metaheuristic Approach

Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1166
Author(s):  
Bashir Musa ◽  
Nasser Yimen ◽  
Sani Isah Abba ◽  
Humphrey Hugh Adun ◽  
Mustafa Dagbasi
Keyword(s):  
Support Vector Regression ◽  
Mean Square Error ◽  
Prediction Accuracy ◽  
Demand Forecasting ◽  
Load Forecasting ◽  
Coefficient Of Determination ◽  
Percentage Error ◽  
Support Vector ◽  
Mean Square ◽  
Hybrid Renewable Energy System

The prediction accuracy of support vector regression (SVR) is highly influenced by a kernel function. However, its performance suffers on large datasets, and this could be attributed to the computational limitations of kernel learning. To tackle this problem, this paper combines SVR with the emerging Harris hawks optimization (HHO) and particle swarm optimization (PSO) algorithms to form two hybrid SVR algorithms, SVR-HHO and SVR-PSO. Both the two proposed algorithms and traditional SVR were applied to load forecasting in four different states of Nigeria. The correlation coefficient (R), coefficient of determination (R2), mean square error (MSE), root mean square error (RMSE), and mean absolute percentage error (MAPE) were used as indicators to evaluate the prediction accuracy of the algorithms. The results reveal that there is an increase in performance for both SVR-HHO and SVR-PSO over traditional SVR. SVR-HHO has the highest R2 values of 0.9951, 0.8963, 0.9951, and 0.9313, the lowest MSE values of 0.0002, 0.0070, 0.0002, and 0.0080, and the lowest MAPE values of 0.1311, 0.1452, 0.0599, and 0.1817, respectively, for Kano, Abuja, Niger, and Lagos State. The results of SVR-HHO also prove more advantageous over SVR-PSO in all the states concerning load forecasting skills. This paper also designed a hybrid renewable energy system (HRES) that consists of solar photovoltaic (PV) panels, wind turbines, and batteries. As inputs, the system used solar radiation, temperature, wind speed, and the predicted load demands by SVR-HHO in all the states. The system was optimized by using the PSO algorithm to obtain the optimal configuration of the HRES that will satisfy all constraints at the minimum cost.

Civil Aeroengine Fault Diagnosis Based on Fuzzy Least Square Support Vector Machine

2011 ◽  
Vol 130-134 ◽  
pp. 2047-2050 ◽  
Author(s):  
Hong Chun Qu ◽  
Xie Bin Ding
Keyword(s):  
Artificial Intelligence ◽  
Machine Learning ◽  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Coefficient Matrix ◽  
Least Square ◽  
Support Vector ◽  
Influence Coefficient ◽  
Structural Risk ◽  
Better Than

SVM(Support Vector Machine) is a new artificial intelligence methodolgy, basing on structural risk mininization principle, which has better generalization than the traditional machine learning and SVM shows powerfulability in learning with limited samples. To solve the problem of lack of engine fault samples, FLS-SVM theory, an improved SVM, which is a method is applied. 10 common engine faults are trained and recognized in the paper.The simulated datas are generated from PW4000-94 engine influence coefficient matrix at cruise, and the results show that the diagnostic accuracy of FLS-SVM is better than LS-SVM.

Improving Real-Time Drilling Data Quality Using Artificial Intelligence and Machine Learning Techniques

2021 ◽  
Author(s):  
S. H. Al Gharbi ◽  
A. A. Al-Majed ◽  
A. Abdulraheem ◽  
S. Patil ◽  
S. M. Elkatatny
Keyword(s):  
Artificial Intelligence ◽  
Machine Learning ◽  
Data Quality ◽  
Real Time ◽  
Input Data ◽  
Support Vector ◽  
The Real ◽  
Drilling Data ◽  
Drilling Operations

Abstract Due to high demand for energy, oil and gas companies started to drill wells in remote areas and unconventional environments. This raised the complexity of drilling operations, which were already challenging and complex. To adapt, drilling companies expanded their use of the real-time operation center (RTOC) concept, in which real-time drilling data are transmitted from remote sites to companies’ headquarters. In RTOC, groups of subject matter experts monitor the drilling live and provide real-time advice to improve operations. With the increase of drilling operations, processing the volume of generated data is beyond a human's capability, limiting the RTOC impact on certain components of drilling operations. To overcome this limitation, artificial intelligence and machine learning (AI/ML) technologies were introduced to monitor and analyze the real-time drilling data, discover hidden patterns, and provide fast decision-support responses. AI/ML technologies are data-driven technologies, and their quality relies on the quality of the input data: if the quality of the input data is good, the generated output will be good; if not, the generated output will be bad. Unfortunately, due to the harsh environments of drilling sites and the transmission setups, not all of the drilling data is good, which negatively affects the AI/ML results. The objective of this paper is to utilize AI/ML technologies to improve the quality of real-time drilling data. The paper fed a large real-time drilling dataset, consisting of over 150,000 raw data points, into Artificial Neural Network (ANN), Support Vector Machine (SVM) and Decision Tree (DT) models. The models were trained on the valid and not-valid datapoints. The confusion matrix was used to evaluate the different AI/ML models including different internal architectures. Despite the slowness of ANN, it achieved the best result with an accuracy of 78%, compared to 73% and 41% for DT and SVM, respectively. The paper concludes by presenting a process for using AI technology to improve real-time drilling data quality. To the author's knowledge based on literature in the public domain, this paper is one of the first to compare the use of multiple AI/ML techniques for quality improvement of real-time drilling data. The paper provides a guide for improving the quality of real-time drilling data.

scholarly journals Using Multi-Temporal MODIS NDVI Data to Monitor Tea Status and Forecast Yield: A Case Study at Tanuyen, Laichau, Vietnam

2020 ◽  
Vol 12 (11) ◽  
pp. 1814
Author(s):  
Phamchimai Phan ◽  
Nengcheng Chen ◽  
Lei Xu ◽  
Zeqiang Chen
Keyword(s):  
Remote Sensing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Vegetation Index ◽  
Coefficient Of Determination ◽  
Percentage Error ◽  
Support Vector ◽  
Mean Square ◽  
Multi Temporal

Tea is a cash crop that improves the quality of life for people in the Tanuyen District of Laichau Province, Vietnam. Tea yield, however, has stagnated in recent years, due to changes in temperature, precipitation, the age of the tea bushes, and diseases. Developing an approach for monitoring tea bushes by remote sensing and Geographic Information Systems (GIS) might be a way to alleviate this problem. Using multi-temporal remote sensing data, the paper details an investigation of the changes in tea health and yield forecasting through the normalized difference vegetation index (NDVI). In this study, we used NDVI as a support tool to demonstrate the temporal and spatial changes in NDVI through the extract tea NDVI value and calculate the mean NDVI value. The results of the study showed that the minimum NDVI value was 0.42 during January 2013 and February 2015 and 2016. The maximum NDVI value was in August 2015 and June 2017. We indicate that the linear relationship between NDVI value and mean temperature was strong with R 2 = 0.79 Our results confirm that the combination of meteorological data and NDVI data can achieve a high performance of yield prediction. Three models to predict tea yield were conducted: support vector machine (SVM), random forest (RF), and the traditional linear regression model (TLRM). For period 2009 to 2018, the prediction tea yield by the RF model was the best with a R 2 = 0.73 , by SVM it was 0.66, and 0.57 with the TLRM. Three evaluation indicators were used to consider accuracy: the coefficient of determination ( R 2 ), root-mean-square error (RMSE), and percentage error of tea yield (PETY). The highest accuracy for the three models was in 2015 with a R 2 ≥ 0.87, RMSE < 50 kg/ha, and PETY less 3% error. In the other years, the prediction accuracy was higher in the SVM and RF models. Meanwhile, the RF algorithm was better than PETY (≤10%) and the root mean square error for this algorithm was significantly less (≤80 kg/ha). RMSE and PETY showed relatively good values in the TLRM model with a RMSE from 80 to 100 kg/ha and a PETY from 8 to 15%.

Influence of Modeling Methods for Housing Price Forecasting

2013 ◽  
Vol 798-799 ◽  
pp. 885-888
Author(s):  
Xiao Li Yang ◽  
Qiong He
Keyword(s):  
Housing Price ◽  
Correlation Coefficients ◽  
Partial Least Square ◽  
Least Square ◽  
Percentage Error ◽  
Support Vector ◽  
Forecasting Model ◽  
Price Forecasting ◽  
Modeling Methods ◽  
Variables Selection

In this work, we estimate Yunnan housing price from 1999 to 2009. Firstly, we analyze the correlation coefficients between housing price and characteristic variables, identify the characteristic variables. Then, we build the forecasting model using four techniques, support vector regression (SVR), radial basis function neural network (RBFNN), partial least square (PLS) and multiple regression analysis (MRA), based on whole variables and characteristic variables. The results show that PLS technique is the best one for housing price forecasting. Its mean absolute percentage error (MAPE) is only 2.45%. SVR and RBFNN are better techniques to obtain a satisfactory forecasting result with almost 5% MAPE. Furthermore, the performance of MRA and SVR can be obviously improved through variables selection.

Sign in / Sign up

Export Citation Format

Share Document