scholarly journals Growth and Flowering of Zantedeschia elliottiana and Z. rehmannii in Response to Environmental Factors

HortScience ◽  
1990 ◽  
Vol 25 (8) ◽  
pp. 925-927 ◽  
Author(s):  
Brian E. Corr ◽  
Richard E. Widmer

The influences of irradiance level, day length, temperature, and leaf area on growth and flowering of Zantedeschia elliottiana Engl. W. Wats (yellow calla lily) and Z. rehmannii (pink calla lily) were determined. Plants grown with 45% or 15% of natural irradiance were taller than those grown under full natural irradiance but flowered at the same time and produced a similar number of flowers. Leaf removal treatments had no effect on any characteristic measured. Plants grown with a night interruption (NI; 2200 hr to 0200 hr) were taller than those under short days (SD = 8 hours), but flowered at the same time and produced a similar number of flowers. Plants were grown with air at 15 or 20C in combination with medium temperatures at ambient level (1C less than air temperature) or a constant 20 or 25C. Z. rehmannii grown with the medium at 20 or 25C and air at 1.5 or 20C flowered faster and were taller than plants grown with air at 15C and with the medium at ambient temperature, but plants from all temperatures produced the same number of flowers over a 120-day cycle. When plants grown with a NI in the first cycle were replanted and grown through a second cycle, they were taller than plants grown from SD treatment first-cycle plants. No first growth-cycle treatment influenced flowering in the second growth cycle.

1982 ◽  
Vol 18 (1) ◽  
pp. 53-63 ◽  
Author(s):  
T. W. Tanton

SUMMARYTemperature is the major environmental variable affecting the yield of tea, but within the framework of a temperature model shoot extension is severely depressed when daily maximum vapour pressure deficits rise above 2.3 kPa. Day length does not affect shoot extension when the nights are cool (10°C), but growth rate is depressed by short days (11 h) when nights are warm (20°C). Soil temperatures between 18–25°C do not affect shoot extension.


1985 ◽  
Vol 107 (1) ◽  
pp. 31-39 ◽  
Author(s):  
L. Martinet ◽  
D. Allain ◽  
Y. Chabi

ABSTRACT In mink, termination of the delayed implantation period, following reactivation of the corpora lutea, and onset of the spring moult are associated with a rise in prolactin secretion triggered by increasing daylength, while decreasing daylength induces the autumn moult. To establish whether suppression of the function of the pineal rendered the mink unresponsive to daylength changes, the superior cervical ganglion was removed bilaterally 2–4 weeks before mating. Intact and operated females were then left outdoors or were put under a lighting regime of either 15 h light: 9 h darkness (15L: 9D) or 8L: 16D. In July, at the end of the spring moult, the 15L: 9D lighting regime was changed to one of 8L: 16D. Under artificial photoperiods ganglionectomy suppressed the stimulatory role of long days and the inhibitory role of short days on prolactin secretion, and consequently on progesterone secretion and spring moult. Neither was the autumn moult, induced early in intact females by the change to a short photoperiod, advanced in ganglionectomized females, showing that the latter were unresponsive to the artificial modification of the photoperiod. However, in animals kept outdoors, prolactin and progesterone secretion and spring moult were not changed by ganglionectomy. Increase in body weight and autumn moult were only slightly delayed by the operation suggesting that other environmental factors had replaced the synchronizing effect of the daylength changes. Alternatively the desynchronization between intact females responsive to photoperiodism and those rendered unresponsive may be too slow to be observed soon after ganglionectomy. J. Endocr. (1985) 107, 31–39


1983 ◽  
Vol 63 (1) ◽  
pp. 67-73 ◽  
Author(s):  
B. E. HOWLAND ◽  
D. SONYA ◽  
L. M. SANFORD ◽  
W. M. PALMER

The influence of photoperiod on serum prolactin levels and prolactin release induced by thyrotropin releasing hormone (TRH) was determined in ewes maintained under the following lighting regimes: Room 1, lighting mimicked natural changes in photoperiod; Room 2, annual photoperiod changes condensed into 6 mo with short days in June; Room 3, same as Room 2 except photoperiod changed abruptly from 16.5 to 8.0 h on 21 Mar. and back to 16.5 h on 21 June; Room 4, constant light. Weekly blood samples were obtained from February to August. Additionally, blood samples were collected before and after treatment with 10 μg TRH on 19 May, 13 June, 27 June and 19 July. Prolactin levels were elevated in ewes exposed to long days or constant light. The mean of all pre-TRH samples was significantly correlated with stress-induced elevations in prolactin (highest pre-TRH value) (r = 0.72) and area under the TRH-induced release curve (r = 0.56). The prolactin release in response to TRH was greatest in ewes exposed to long days or constant light. Abrupt increase of day length elevated pretreatment prolactin levels (P < 0.01) and increased area under the response curve (P < 0.05). Key words: Photoperiod, TRH, prolactin, ewes


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Younes Bahammou ◽  
Mounir Kouhila ◽  
Haytem Moussaoui ◽  
Hamza Lamsyehe ◽  
Zakaria Tagnamas ◽  
...  

PurposeThis work aims to study the hydrothermal behavior of mortar cement toward certain environmental factors (ambient air temperature and air velocity) based on its drying kinetics data. The objective is to provide a better understanding and controlling the stability of mortar structures, which integrate the sorption phenomenon, drying process, air pressure and intrinsic characteristics. This leads to predict the comportment of mortar structures in relation with main environmental factors and minimize the risk of cracking mortar structures at an early age.Design/methodology/approachThermokinetic study was carried out in natural and forced convection solar drying at three temperatures 20, 30 and 40°C and three air velocities (1, 3 and 5 m.s-1). The empirical and semiempirical models tested successfully describe the drying kinetics of mortar. These models simulate the drying process of water absorbed by capillarity, which is the most common humidity transfer mechanism in building materials and contain parameters with physical significance, which integrate the effect of several environmental factors and intrinsic characteristics of mortar structures.FindingsThe models simulate the drying process of water absorbed by capillarity, which is the most common humidity transfer mechanism in building materials and contain parameters with physical significance, which integrate the effect of several environmental factors and intrinsic characteristics of mortar structures. The average activation energy obtained expressed the temperature effect on the mortar diffusivity. The drying constant and the diffusion coefficient can be used to predict the influence of these environmental factors on the drying behavior of various building materials and therefore on their durability.Originality/valueEvaluation of the effect of several environmental factors and intrinsic characteristics of mortar structures on their durability.


1988 ◽  
Vol 74 (3) ◽  
pp. 181-186
Author(s):  
S. P. L. Travis

AbstractThe surface temperature of eight Royal Marine recruits was monitored in the field during Autumn training on Dartmoor (minimum air temperature 4.5°C). The lowest skin temperature recorded was 6.1°C. One subject experienced a toe temperature below 10° for 5.5 hours and below 15°C for 12.6 hours during a 24 hour recording period. Ambient temperature and inactivity during exposure to cold were the main factors associated with low toe temperatures but individual responses varied widely.


1962 ◽  
Vol 10 (4) ◽  
pp. 247-253
Author(s):  
G. Stanhill

DM production from a heavily fertilized lucerne crop grown at Gilat and irrigated daily was compared with potential photosynthesis calculated from meteorological data [see F.C.A. 12: 1940]. After corrections were applied for losses due to respiration, root growth and light wasted beneath the crop canopy, calculated amounts agreed well with those measured. The percentage of light utilized was 33% with cutting at 31-day intervals and 46% with cutting at 48-day intervals. DM production was correlated positively with solar radiation and negatively with air temperature.-R.B. (Abstract retrieved from CAB Abstracts by CABI’s permission)


2019 ◽  
Author(s):  
Hao Liang ◽  
Meng Zhang ◽  
Yandong Zhao ◽  
Chao Gao ◽  
Hailan Wang

To achieve a rational allocation of limited water resources, and formulation of an appropriate irrigation system, this research studied the change characteristics of stem water content (StWC) in plant and its response to micro-environmental factors. In this study, the StWC and micro-environmental factors of Lagerstroemia indica in Beijing were continuously observed by BD-IV plant stem water content sensor and a forest microclimate monitoring station from 2017 to 2018. The variation of StWC and its correlation with environmental factors were analyzed. The results showed the StWC of Lagerstroemia indica varies regularly day and night during the growth cycle. Meanwhile, the rising time, valley time, and falling time of StWC were various at the different growth stages of Lagerstroemia indica. The results of correlation analysis between StWC and micro-environmental factors indicated that the StWC of Lagerstroemia indica was positively correlated with air relative humidity, while it was negatively correlated with total radiation and air temperature. The multiple regression equation of StWC and micro-environmental factors of Lagerstroemia indica was StWC = 11.789-1.402Rn-0.931T-1.132Ws+0.933RH-3.368ST+2.168SMC, and the coefficient of determination of the equation was of 0.87. Furthermore, the results illustrated that the irrigation should pay attention to supplementing irrigation in time during the peak growing season of fruit.


PLoS ONE ◽  
2021 ◽  
Vol 16 (1) ◽  
pp. e0240390
Author(s):  
Hongxu Dong ◽  
Lindsay V. Clark ◽  
Xiaoli Jin ◽  
Kossonou Anzoua ◽  
Larisa Bagmet ◽  
...  

Miscanthus is a close relative of Saccharum and a potentially valuable genetic resource for improving sugarcane. Differences in flowering time within and between Miscanthus and Saccharum hinders intra- and interspecific hybridizations. A series of greenhouse experiments were conducted over three years to determine how to synchronize flowering time of Saccharum and Miscanthus genotypes. We found that day length was an important factor influencing when Miscanthus and Saccharum flowered. Sugarcane could be induced to flower in a central Illinois greenhouse using supplemental lighting to reduce the rate at which days shortened during the autumn and winter to 1 min d-1, which allowed us to synchronize the flowering of some sugarcane genotypes with Miscanthus genotypes primarily from low latitudes. In a complementary growth chamber experiment, we evaluated 33 Miscanthus genotypes, including 28 M. sinensis, 2 M. floridulus, and 3 M. ×giganteus collected from 20.9° S to 44.9° N for response to three day lengths (10 h, 12.5 h, and 15 h). High latitude-adapted M. sinensis flowered mainly under 15 h days, but unexpectedly, short days resulted in short, stocky plants that did not flower; in some cases, flag leaves developed under short days but heading did not occur. In contrast, for M. sinensis and M. floridulus from low latitudes, shorter day lengths typically resulted in earlier flowering, and for some low latitude genotypes, 15 h days resulted in no flowering. However, the highest ratio of reproductive shoots to total number of culms was typically observed for 12.5 h or 15 h days. Latitude of origin was significantly associated with culm length, and the shorter the days, the stronger the relationship. Nearly all entries achieved maximal culm length under the 15 h treatment, but the nearer to the equator an accession originated, the less of a difference in culm length between the short-day treatments and the 15 h day treatment. Under short days, short culms for high-latitude accessions was achieved by different physiological mechanisms for M. sinensis genetic groups from the mainland in comparison to those from Japan; for mainland accessions, the mechanism was reduced internode length, whereas for Japanese accessions the phyllochron under short days was greater than under long days. Thus, for M. sinensis, short days typically hastened floral induction, consistent with the expectations for a facultative short-day plant. However, for high latitude accessions of M. sinensis, days less than 12.5 h also signaled that plants should prepare for winter by producing many short culms with limited elongation and development; moreover, this response was also epistatic to flowering. Thus, to flower M. sinensis that originates from high latitudes synchronously with sugarcane, the former needs day lengths >12.5 h (perhaps as high as 15 h), whereas that the latter needs day lengths <12.5 h.


Author(s):  
Devendra Dandotiya ◽  
Nitin D. Banker

The power output of a gas turbine plant decreases with the increase in ambient temperature. Moreover, the ambient temperature fluctuates about 15–20°C in a day. Hence, cooling of intake air makes a noticeable improvement to the gas turbine performance. In this regard, various active cooling techniques such as vapor compression refrigeration, vapor absorption refrigeration, vapor adsorption refrigeration and evaporative cooling are applied for the cooling of intake air. This paper presents a new passive cooling technique where the intake air temperature is reduced by incorporating phase change material (PCM) based heat exchanger parallel to conventional air intake line. During the daytime, the air is passed through the PCM which has melting temperature lower than the peak ambient temperature. This will reduce the ambient air temperature before taking to the compressor. Once the PCM melts completely, the required ambient air would be drawn from the ambient through conventional air intake arrangement. During the night, when there is lower ambient temperature, PCM converts from liquid to solid. The selected PCM has a melting temperature less than the peak ambient temperature and higher than the minimum ambient temperature. It is observed from the numerical modeling of the PCM that about four hours are required for the melting of PCM and within this time, the intake air can also be cooled by 5°C. The thermodynamic analysis of the results showed about 5.2% and 5.2% improvement in net power output and thermal efficiency, respectively for four hours at an ambient temperature of 45°C.


2019 ◽  
Vol 100 ◽  
pp. 00005
Author(s):  
Artur Bieniek ◽  
Łukasz Mika ◽  
Jan Kuchmacz

In response to international regulations, natural refrigerants such as carbon dioxide are more and more frequently used in the refrigeration industry. Due to thermodynamic properties, R-744 is used in the transcritical cycle as an individual refrigerant. In the hereby article, high pressure of CO2 and air temperature values were analysed. The measurements were conducted on the gas cooler side and involved external air temperature values in the summer period between 1 June to 30 September 2018. The “Booster” installation was used in one of Polish supermarkets. Correlations required to determine the optimal pressure of carbon dioxide depending on ambient temperature were presented in the article. The equations presented hereby allowed to maximize the energy efficiency ratio. An optimal high pressure for one of the correlations from literature was calculated on the basis of the measurement of ambient temperature. Actual and optimal pressure values of carbon dioxide were compared in the analysed period of time.


Sign in / Sign up

Export Citation Format

Share Document