scholarly journals Magnitude of Genotype × Environment Interactions Affecting Tomato Fruit Quality

HortScience ◽  
2012 ◽  
Vol 47 (6) ◽  
pp. 721-726 ◽  
Author(s):  
Dilip R. Panthee ◽  
Chunxue Cao ◽  
Spencer J. Debenport ◽  
Gustavo R. Rodríguez ◽  
Joanne A. Labate ◽  
...  
Keyword(s):  
New York ◽  
Vitamin C ◽  
Fruit Quality ◽  
Tomato Fruit ◽  
Heritability Estimate ◽  
Field Trials ◽  
Soluble Solids ◽  
Quality Traits ◽  
Titratable Acid ◽  
Tomato Genotypes

There is a growing interest by consumers to purchase fresh tomatoes with improved quality traits including lycopene, total soluble solids (TSS), vitamin C, and total titratable acid (TTA) content. As a result, there are considerable efforts by tomato breeders to improve tomato for these traits. However, suitable varieties developed for one location may not perform the same in different locations. This causes a problem for plant breeders because it is too labor-intensive to develop varieties for each specific location. The objective of this study was to determine the extent of genotype × environment (G×E) interaction that influences tomato fruit quality. To achieve this objective, we grew a set of 42 diverse tomato genotypes with different fruit shapes in replicated trials in three locations: North Carolina, New York, and Ohio. Fruits were harvested at the red ripe stage and analyzed for lycopene, TSS, vitamin C, and TTA. Analysis of variance (ANOVA) revealed that there were significant differences (P < 0.05) among tomato genotypes, locations, and their interaction. Further analysis of quality traits from individual locations revealed that there was as much as 211% change in performance of some genotypes in a certain location compared with the average performance of a genotype. Lycopene was found to be most influenced by the environment, whereas TTA was the least influenced. This was in agreement with heritability estimates observed in the study for these quality traits, because heritability estimate for lycopene was 16%, whereas that for TTA was 87%. The extent of G×E interaction found for the fruit quality traits in the tomato varieties included in this study may be useful in identifying optimal locations for future field trials by tomato breeders aiming to improve tomato fruit quality.

scholarly journals Estimating genotype-environment interactions for internal fruit quality traits in cherry tomatoes

2020 ◽  
Vol 14 (3) ◽  
pp. 361-374
Author(s):  
Nelson Ceballos-Aguirre ◽  
Franco Alirio Vallejo-Cabrera ◽  
Yacenia Morillo-Coronado
Keyword(s):  
Vitamin C ◽  
Fruit Quality ◽  
Block Design ◽  
Soluble Solids ◽  
Cherry Tomato ◽  
Fresh Weight ◽  
Improvement Programs ◽  
Four Blocks ◽  
Tomato Genotypes ◽  
Cherry Tomatoes

Genotype-environment interactions (GEI) were assessed in 10 cherry tomato accessions in nine environments, including four artificial settings (0, 60 120, and 180 kg ha-1 of potassium) established on the experimental farms Montelindo (Palestina), Tesorito (Manizales), and CEUNP (Palmira) (Colombia). The plant material included 10 cherry tomato genotypes obtained from the germplasm bank at the Instituto Agronómico de Campinas and Tomato Genetics Resources Center (TGRC). A completely randomized block design with four blocks corresponding to the level of potassium fertilization was used (0, 60, 120, 180 kg ha-1); 0 kg ha-1 was the level reported for the soil. The effective size of the experiment unit was seven plants; the plot included the five central plants. A distance of 1.5 m between rows, 0.50 m between plants, and 2 m between blocks was used. The contents of soluble solids (°Brix), vitamin C (mg/100 g fresh weight), and lycopene (µg g-1 fresh weight) were assessed. The analysis of variance (ANOVA) showed significant differences (P<0.01) between the tomato genotypes, environments, and G×E interactions for the three assessed traits . The AMMI analysis identified similar and contrasting environments and determined the genotypes that contributed the most to the GEI. The environments with 120 and 180 kg ha-1 potassium favored the expression of vitamin C, while Palmira favored the lycopene content. The findings are useful for identifying optimal locations and elite genotypes that can be used as sources of variability in fruit quality improvement programs for cherry tomatoes.

scholarly journals Comparative Studies on the Quality and Lycopene Content of Pomelo (Citrus grandis Osbeck) Cultivars

2020 ◽  
Vol 15 (9) ◽  
pp. 1934578X2095329
Author(s):  
Hongjuan Yang ◽  
Min Li ◽  
Xiaohua Kui ◽  
Yueting Sun ◽  
Jian-an Li ◽  
...  
Keyword(s):  
Vitamin C ◽  
Fruit Quality ◽  
Acid Content ◽  
Sugar Content ◽  
Soluble Sugar ◽  
Shape Index ◽  
Fruit Shape ◽  
Soluble Solids ◽  
Titratable Acid ◽  
Lycopene Content

Three cultivars of pomelo “Guanximiyou” (GX) and its variants “Hongroumiyou” (HR) and “Sanhongmiyou” (SH) were selected as experimental materials to evaluate the quality and edible value of the fruit. In this study, the fruit quality and lycopene contents were investigated. The results show that among the 3 cultivars used, the contents of soluble solids, vitamin C, and total phenol in the juice sac of SH were the highest, followed by HR and GX. SH has the largest fruit shape index, soluble sugar content: GX > HR > SH, and titratable acid content: GX < HR < SH. From our findings, the content of lycopene was the highest in SH, followed by HR and GX. SH has the greatest potential for production due to its appreciable content of lycopene and fruit quality.

scholarly journals Impact of Selenium and Copper Nanoparticles on Yield, Antioxidant System, and Fruit Quality of Tomato Plants

Plants ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 355 ◽  
Author(s):  
Hernández-Hernández ◽  
Quiterio-Gutiérrez ◽  
Cadenas-Pliego ◽  
Ortega-Ortiz ◽  
Hernández-Fuentes ◽  
...  
Keyword(s):  
Vitamin C ◽  
Fruit Quality ◽  
Tomato Fruit ◽  
Titratable Acidity ◽  
Good Alternative ◽  
Soluble Solids ◽  
Antioxidant Compounds ◽  
Tomato Yield ◽  
The Impact

The effects of nanoparticles (NPs) on plants are contrasting; these depend on the model plant, the synthesis of the nanoparticles (concentration, size, shape), and the forms of application (foliar, substrate, seeds). For this reason, the objective of this study was to report the impact of different concentrations of selenium (Se) and copper (Cu) NPs on yield, antioxidant capacity, and quality of tomato fruit. The different concentrations of Se and Cu NPs were applied to the substrate every 15 days (five applications). The yield was determined until day 102 after the transplant. Non-enzymatic and enzymatic antioxidant compounds were determined in the leaves and fruits as well as the fruit quality at harvest. The results indicate that tomato yield was increased by up to 21% with 10 mg L−1 of Se NPs. In leaves, Se and Cu NPs increased the content of chlorophyll, vitamin C, glutathione, 2,2′-azino-bis(3-ethylbenzthiazolin-6-sulfonic acid (ABTS), superoxide dismutase (SOD), glutathione peroxidase (GPX) and phenylalanine ammonia liasa (PAL). In fruits, they increased vitamin C, glutathione, flavonoids, firmness, total soluble solids, and titratable acidity. The combination of Se and Cu NPs at optimal concentrations could be a good alternative to improve tomato yield and quality, but more studies are needed to elucidate their effects more clearly.

scholarly journals Postharvest quality of tomato as affected by nitrogen and sulfur interaction

2020 ◽  
Vol 69 (2) ◽  
pp. 130-135
Author(s):  
Matias Siueia Júnior ◽  
Maria Ligia de Souza Silva ◽  
Anderson Ricardo Trevizam ◽  
Valdemar Faquin ◽  
Deivisson Ferreira da Silva
Keyword(s):  
Vitamin C ◽  
Fruit Quality ◽  
Tomato Fruit ◽  
Beta Carotene ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Postharvest Quality ◽  
Solanum Lycopersicum L ◽  
Randomized Design

Nitrogen (N) and sulfur (S) are nutrients that, in addition to influencing plant growth and production, interfere with processes related to postharvest fruit quality. In the present study, N x S interaction was evaluated in the postharvest quality of tomato (Solanum lycopersicum L.). The experiment was conducted in a greenhouse using 5 dm3 capacity vessels containing a 0-20 cm layer of a dystropherric Red Latosol. A 5 x 3 factorial design was used, with combinations of five doses of N (0, 100, 200, 300 and 400 mg dm-3) and three doses of S (0, 60 and 120 mg dm-3) distributed in a completely randomized design, with four repetitions. After harvest, the attributes of fruit quality were evaluated: firmness, pH, soluble solids (SS), titratable acidity (AT), soluble solids ratio and titratable acidity (SS / AT), vitamin C, lycopene and beta-carotene. An increase in firmness was observed, as well as the content of soluble solids, titratable acidity and the SS / AT ratio of the fruits as a result of the interaction N x S. However, this interaction favoured the reduction of the contents of vitamin C, lycopene and beta-carotene, and the quality characteristics of tomato fruit in relation to the recommended values. Only the increasing doses of N favoured a higher pH in the tomato fruits.

scholarly journals (307) NFT versus Subirrigation: II. Tomato Fruit Quality Grown in Closed Soilless Systems under Salinity or Water Stress

HortScience ◽  
2005 ◽  
Vol 40 (4) ◽  
pp. 1011D-1011
Author(s):  
Francesco Montesano ◽  
Cristina Ferulli ◽  
Angelo Parente ◽  
Francesco Serio ◽  
Pietro Santamaria
Keyword(s):  
Water Stress ◽  
Vitamin C ◽  
Salinity Stress ◽  
Fruit Quality ◽  
Tomato Fruit ◽  
Total Yield ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Average Weight ◽  
Fresh Matter

Nutrient solutions (NS) containing moderate to high concentrations of salts are frequently supplied to improve the taste of tomato fruits grown in soilless systems. The aim of this study was to determine whether salinity and water stress affect the tomato fruit quality similarly. The research was conducted in Mola di Bari, Italy, during Autumn 2004, and compared the nutrient film technique (NFT) with the trough-bench technique [Subirrigation (SUB)] in terms of tomato (Lycopersicon esculentum Mill. cv. Kabiria) fruit quality. In the NFT, the plants were grown with two electrical conductivity (EC) levels (2–4 and 6–8 dS·m-1) of NS. The highest EC was obtained by increasing all the ions in the NS. In the SUB system, two water tensions (-4 and -8 kPa) of substrate (perlite) were examinated. At harvest, in each cluster (six/plant), fruit dry matter (DM) and total soluble solids (TSS) were determinated. In the fourth and sixth cluster, vitamin C content and titratable acidity were determined. Total yield was not influenced by either soilless system, while the average weight of the fruit was lower in the SUB. The DM and TTS were influenced by soilless system (on average, 6.6 vs 7.3 g/100 g of fresh matter and 5.3 vs. 5.9 °Brix, with NFT and SUB, respectively). Both of the stresses resulted in the increase of DM and TSS, principally in SUB (water stress) in respect to NFT (salinity stress), while vitamin C and titratable acidity were not influenced by soilless system or water/salinity stress (25.2 mg/100 g fresh matter and 0.45 g/100 mL of citric acid juice, respectively). Results of NFT with the highest EC of NS exceeded 9 dS·m-1, without any stress symptoms in the plants, while EC in the SUB system remained unchanged (about 2.5 dS·m-1).

scholarly journals Melatonin Treatment to Pomegranate Trees Enhances Fruit Bioactive Compounds and Quality Traits at Harvest and during Postharvest Storage

Antioxidants ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 820
Author(s):  
José M. Lorente-Mento ◽  
Fabián Guillén ◽  
Salvador Castillo ◽  
Domingo Martínez-Romero ◽  
Juan M. Valverde ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Bioactive Compounds ◽  
Fruit Quality ◽  
Storage Period ◽  
Soluble Solids ◽  
First Year ◽  
Quality Traits ◽  
Postharvest Storage ◽  
Melatonin Treatment ◽  
Total Soluble Solids

The effect of melatonin pomegranate tree treatments on fruit quality and bioactive compounds with antioxidant activity at harvest and during storage at 10 °C for 60 days was assayed in two consecutive years, 2019 and 2020. In the first year, trees were treated with 0.1, 0.3 and 0.5 mM of melatonin along the developmental fruit growth cycle, and results showed that bioactive compounds (total phenolics and total and individual anthocyanins) and antioxidant activity at harvest were higher in fruits from melatonin-treated trees than in controls. Other fruit quality parameters, such as firmness, total soluble solids and aril red colour, were also increased as a consequence of melatonin treatment. In fruit from control tress, firmness and acidity levels decreased during storage, while increases occurred on total soluble solids, leading to fruit quality reductions. These changes were delayed, and even maintenance of total acidity was observed, in fruit from melatonin-treated trees with respect to controls, resulting in a fruit shelf-life increase. Moreover, concentration of phenolics and anthocyanins and antioxidant activity were maintained at higher levels in treated than in control fruits during the whole storage period. In general, all the mentioned effects were found at the highest level with the 0.1 mM melatonin dose, and then it was selected for repeating the experiment in the second year and results of the first year were confirmed. Thus, 0.1 mM melatonin treatment could be a useful tool to enhance aril content on bioactive compounds with antioxidant activity and health beneficial effects and to improve quality traits of pomegranate fruit, at harvest and during postharvest storage.

scholarly journals High-density linkage map construction and identification of loci regulating fruit quality traits in blueberry

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Molla F. Mengist ◽  
Hamed Bostan ◽  
Elisheba Young ◽  
Kristine L. Kay ◽  
Nicholas Gillitt ◽  
...  
Keyword(s):  
Linkage Map ◽  
Fruit Quality ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
High Density ◽  
Soluble Solids ◽  
Quality Traits ◽  
Total Soluble Solids ◽  
Fruit Quality Traits ◽  
High Density Linkage Map

AbstractFruit quality traits play a significant role in consumer preferences and consumption in blueberry (Vaccinium corymbosum L). The objectives of this study were to construct a high-density linkage map and to identify the underlying genetic basis of fruit quality traits in blueberry. A total of 287 F1 individuals derived from a cross between two southern highbush blueberry cultivars, ‘Reveille’ and ‘Arlen’, were phenotyped over three years (2016–2018) for fruit quality-related traits, including titratable acidity, pH, total soluble solids, and fruit weight. A high-density linkage map was constructed using 17k single nucleotide polymorphisms markers. The linkage map spanned a total of 1397 cM with an average inter-loci distance of 0.08 cM. The quantitative trait loci interval mapping based on the hidden Markov model identified 18 loci for fruit quality traits, including seven loci for fruit weight, three loci for titratable acidity, five loci for pH, and three loci for total soluble solids. Ten of these loci were detected in more than one year. These loci explained phenotypic variance ranging from 7 to 28% for titratable acidity and total soluble solid, and 8–13% for pH. However, the loci identified for fruit weight did not explain more than 10% of the phenotypic variance. We also reported the association between fruit quality traits and metabolites detected by Proton nuclear magnetic resonance analysis directly responsible for these fruit quality traits. Organic acids, citric acid, and quinic acid were significantly (P < 0.05) and positively correlated with titratable acidity. Sugar molecules showed a strong and positive correlation with total soluble solids. Overall, the study dissected the genetic basis of fruit quality traits and established an association between these fruit quality traits and metabolites.

scholarly journals Efficacy of coupling gamma irradiation with calcium chloride and lemongrass oil in maintaining guava fruit quality and inhibiting fungal growth during cold storage

2018 ◽  
Vol 30 (1) ◽  
pp. 67-78 ◽  
Author(s):  
Ramadan A. Hassanein ◽  
Ehab A. Salem ◽  
Ahmed A. Zahran
Keyword(s):  
Vitamin C ◽  
Fruit Quality ◽  
Cold Storage ◽  
Fungal Growth ◽  
Alternaria Solani ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Γ Irradiation ◽  
Lemongrass Oil

AbstractThis study was performed to explore the efficacy of combining more than one postharvest treatment in maintaining some quality attributes and reducing fungal pathogenicity in cold-stored guava fruits. The investigated postharvest treatments included the control, CaCl2(4%), lemongrass oil (2 dm3kg−1), gamma (γ) irradiation (0.2, 0.4 and 0.6 kGy), 0.4 kGy γ irradiation + CaCl2(4%), and 0.4 kGy γ irradiation + lemongrass oil (2 dm3kg−1). The studied physiochemical attributes included weight loss, decay percentage, fruit firmness, total soluble solids (TSS), titratable acidity (TA), and vitamin C content. Different fungal species were also isolated from decayed fruits and were identified asAlternaria alternata,Alternaria solani,Aspergillus niger,Botrytis cinerea,Fusarium solaniandRhizopus stolonifer. The severity of infection for the different fungi was determined, and anin vitroantifungal assay was conducted for lemongrass oil. All the investigated treatments generally reduced decay and water loss percentages, and controlled TSS, TA and vitamin C decrements that occurred during cold storage. On the other hand, higher irradiation doses generally increased fruit softness, and the 0.4 kGy γ dose did not contribute to the overall fruit quality when coupled with CaCl2and lemongrass oil, compared to CaCl2and lemongrass oil treatments alone.

scholarly journals Alcobaça allele and genotypic backgrounds affect yield and fruit shelf life of tomato hybrids

2003 ◽  
Vol 60 (2) ◽  
pp. 269-275 ◽  
Author(s):  
Túlio José Mendes Dias ◽  
Wilson Roberto Maluf ◽  
Marcos Ventura Faria ◽  
Joelson André de Freitas ◽  
Luiz Antonio Augusto Gomes ◽  
...  
Keyword(s):  
Shelf Life ◽  
Fruit Quality ◽  
Tomato Fruit ◽  
Total Yield ◽  
Fruit Shape ◽  
Quality Traits ◽  
Average Mass ◽  
Post Harvest ◽  
Fruit Quality Traits ◽  
Commercial Yield

Post-harvest shelf life of tomato fruit may be increased by deploying mutant alleles which affect the natural ripening process and/or by a favorable genotypic background. Among the several ripening mutant genes, alcobaça (alc) has proved to be highly efficient in increasing shelf life of commercial tomato fruits, especially in heterozygosis, a state at which no limiting deleterious effects upon fruit color occur. The effects of heterozygosity in the alcobaça locus (alc+/alc) on yield and fruit quality traits of tomato hybrids with three genotypic backgrounds. We evaluated three pairs of hybrids obtained from crosses between the near-isogenic pollen source lines Flora-Dade (alc+/alc+) and TOM-559 (alc/alc), and three maternal lines (Stevens, NC-8276 and Piedmont). The six treatments were factorial combinations of two different status in the alc locus (alc+/alc and alc+/alc+) versus three different genotypic backgrounds (maternal lines). Fruits were harvested at the breaker stage of maturation and stored in shelves at 21ºC for 14 days. Yield and fruit quality traits were then evaluated. Regardless of the background, the alc allele in heterozygosis (alc+/alc) did not interfere with the total yield, commercial yield, average mass per fruit, average mass per commercial fruit, fruit shape, or with fruit peduncular scar diameter. The alc+/alc genotype reduced the rate of firmness loss and delayed evolution of the red color of the fruit, thus contributing to an increase of the post-harvest shelf life for all three genotypic backgrounds.

scholarly journals Phenotypic Evaluation of a Hybrid Diploid Blueberry Population for Plant Development and Fruit Quality Traits

Agronomy ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1067
Author(s):  
Lisa J. Rowland ◽  
Elizabeth L. Ogden ◽  
Bryan T. Vinyard
Keyword(s):  
Fruit Quality ◽  
Plant Development ◽  
Cold Hardiness ◽  
Soluble Solids ◽  
Chilling Requirement ◽  
Quality Traits ◽  
Flower Bud ◽  
Phenotypic Data ◽  
Fruit Quality Traits ◽  
Highly Correlated

A diploid blueberry mapping population, used previously to map quantitative trait loci (QTL) for chilling requirement and cold hardiness, was evaluated for several plant development and fruit quality traits. Specifically, the population was phenotyped in a greenhouse for timing of various stages of flower bud, leaf bud and fruit development and for fruit quality traits including weight, diameter, color, scar, firmness, flavor and soluble solids. Phenotypic data was analyzed statistically by analysis of variance, correlation tests, to examine associations of traits, and heritability. Results indicated that the traits were segregating and most were distributed normally in the population. Many of the development traits were correlated, and timing of shoot expansion, early bloom and full bloom was also correlated with the previously evaluated trait of chilling requirement. Some correlations were found among the fruit quality traits as well. For example, weight was highly correlated with diameter, and subjectively measured firmness was moderately correlated with one of the objectively measured firmness traits. In addition, most of the traits showed significant variation across genotypes and across years, and most had moderate to high heritability. Therefore, we conclude that the diploid population should be useful for identifying QTL for many of these traits.

Sign in / Sign up

Export Citation Format

Share Document