Quantification of uncertainty in reference evapotranspiration climate change signals in Belgium

2016 ◽  
Vol 48 (5) ◽  
pp. 1391-1401 ◽  
Author(s):  
Parisa Hosseinzadehtalaei ◽  
Hossein Tabari ◽  
Patrick Willems
Keyword(s):  
Climate Change ◽  
General Circulation ◽  
Reference Evapotranspiration ◽  
Coupled Model ◽  
Circulation Model ◽  
Change Context ◽  
Intercomparison Project ◽  
Projected Changes ◽  
Availability Assessment ◽  
Comparable Magnitude

Projections of evapotranspiration form the basis of future runoff and water availability assessment in a climate change context. The scarcity of data or insufficiency of time/funds compels the application of simple reference evapotranspiration (ETo) methods requiring less meteorological inputs for ETo projections which adds uncertainty to the projected changes. This study investigates the bias in ETo climate change signals derived from seven simple temperature- and radiation-based methods (Blaney–Criddle, Hargreaves–Samani, Schendel, Makkink, Turc, Jensen–Haise, Tabari) compared with that from the standard Penman–Monteith FAO 56 method on the basis of 12 general circulation model (GCM) outputs from the Coupled Model Intercomparison Project Phase 5 for central Belgium for four future greenhouse gas scenarios (RCP2.6, RCP4.5, RCP6.0, RCP8.5). The results show the lack of conformity on the amount of ETo changes between the simple and standard methods, with biases of over 100% for some simple methods. The uncertainty affiliated with ETo methods for monthly ETo changes is smaller but of comparable magnitude to GCM uncertainty, which is usually the major source of uncertainty, and larger for daily extreme ETo changes. This emphasizes the imperative of addressing the uncertainty associated with ETo methods for quantifying the hydrological response to climate change.

scholarly journals Long-term Surface Temperature (LoST) database as a complement for GCM preindustrial simulations

2019 ◽  
Vol 15 (3) ◽  
pp. 1099-1111 ◽  
Author(s):  
Francisco José Cuesta-Valero ◽  
Almudena García-García ◽  
Hugo Beltrami ◽  
Eduardo Zorita ◽  
Fernando Jaume-Santero
Keyword(s):  
Surface Temperature ◽  
General Circulation ◽  
Ground Surface ◽  
Coupled Model ◽  
Circulation Model ◽  
Research Unit ◽  
Large Spread ◽  
Intercomparison Project ◽  
Past Millennium

Abstract. Estimates of climate sensitivity from general circulation model (GCM) simulations still present a large spread despite the continued improvements in climate modeling since the 1970s. This variability is partially caused by the dependence of several long-term feedback mechanisms on the reference climate state. Indeed, state-of-the-art GCMs present a large spread of control climate states probably due to the lack of a suitable reference for constraining the climatology of preindustrial simulations. We assemble a new gridded database of long-term ground surface temperatures (LoST database) obtained from geothermal data over North America, and we explore its use as a potential reference for the evaluation of GCM preindustrial simulations. We compare the LoST database with observations from the Climate Research Unit (CRU) database, as well as with five past millennium transient climate simulations and five preindustrial control simulations from the third phase of the Paleoclimate Modelling Intercomparison Project (PMIP3) and the fifth phase of the Coupled Model Intercomparison Project (CMIP5). The database is consistent with meteorological observations as well as with both types of preindustrial simulations, which suggests that LoST temperatures can be employed as a reference to narrow down the spread of surface temperature climatologies on GCM preindustrial control and past millennium simulations.

scholarly journals Bias-corrected climate projections for South Asia from Coupled Model Intercomparison Project-6

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Vimal Mishra ◽  
Udit Bhatia ◽  
Amar Deep Tiwari
Keyword(s):  
Climate Change ◽  
Impact Assessment ◽  
South Asia ◽  
General Circulation ◽  
Coupled Model ◽  
General Circulation Models ◽  
River Basins ◽  
Climate Projections ◽  
Model Intercomparison ◽  
Intercomparison Project

Abstract Climate change is likely to pose enormous challenges for agriculture, water resources, infrastructure, and livelihood of millions of people living in South Asia. Here, we develop daily bias-corrected data of precipitation, maximum and minimum temperatures at 0.25° spatial resolution for South Asia (India, Pakistan, Bangladesh, Nepal, Bhutan, and Sri Lanka) and 18 river basins located in the Indian sub-continent. The bias-corrected dataset is developed using Empirical Quantile Mapping (EQM) for the historic (1951–2014) and projected (2015–2100) climate for the four scenarios (SSP126, SSP245, SSP370, SSP585) using output from 13 General Circulation Models (GCMs) from Coupled Model Intercomparison Project-6 (CMIP6). The bias-corrected dataset was evaluated against the observations for both mean and extremes of precipitation, maximum and minimum temperatures. Bias corrected projections from 13 CMIP6-GCMs project a warmer (3–5°C) and wetter (13–30%) climate in South Asia in the 21st century. The bias-corrected projections from CMIP6-GCMs can be used for climate change impact assessment in South Asia and hydrologic impact assessment in the sub-continental river basins.

scholarly journals Climate and African precipitation changes in the mid-Holocene simulated using an Earth System Model MIROC-ESM

2012 ◽  
Vol 8 (4) ◽  
pp. 3277-3343 ◽  
Author(s):  
R. Ohgaito ◽  
T. Sueyoshi ◽  
A. Abe-Ouchi ◽  
T. Hajima ◽  
S. Watanabe ◽  
...  
Keyword(s):  
General Circulation ◽  
Coupled Model ◽  
Circulation Model ◽  
Earth System Model ◽  
System Model ◽  
Earth System ◽  
African Monsoon ◽  
Proxy Records ◽  
Intercomparison Project ◽  
Precipitation Changes

Abstract. The importance of evaluating models using paleoclimate simulations is becoming more recognized in efforts to improve climate projection. To evaluate an integrated Earth System Model, MIROC-ESM, we performed simulations in time-slice experiments for the mid-Holocene (6000 yr before present, 6 ka) and preindustrial (1850 AD) times under the protocol of the Coupled Model Intercomparison Project 5/Paleoclimate Modelling Intercomparison Project 3. We first overview the simulated global climates by comparing with simulations using a previous version of the MIROC model (MIROC3), which is an atmosphere-ocean coupled general circulation model, and then comprehensively discuss various aspects of climate change with 6 ka forcing. We also discuss the 6 ka African monsoon activity. The 6 ka precipitation change over northern Africa according to MIROC-ESM does not differ dramatically from that obtained with MIROC3, which means that newly developed components such as dynamic vegetation and improvements in the atmospheric processes do not have significant impacts on representing the 6 ka monsoon change suggested by proxy records. Although there is no drastic difference in the African monsoon representation between the two models, there are small but significant differences in the precipitation enhancement in MIROC-ESM, which can be related to the representation of the sea surface temperature rather than the vegetation coupling, at least in MIROC-ESM.

scholarly journals nonlinMIP contribution to CMIP6: model intercomparison project for non-linear mechanisms: physical basis, experimental design and analysis principles (v1.0)

2016 ◽  
Vol 9 (11) ◽  
pp. 4019-4028 ◽  
Author(s):  
Peter Good ◽  
Timothy Andrews ◽  
Robin Chadwick ◽  
Jean-Louis Dufresne ◽  
Jonathan M. Gregory ◽  
...  
Keyword(s):  
Experimental Design ◽  
General Circulation ◽  
Global Climate ◽  
Coupled Model ◽  
Circulation Model ◽  
State Dependence ◽  
Model Intercomparison ◽  
Specific Policy ◽  
Non Linear ◽  
Intercomparison Project

Abstract. nonlinMIP provides experiments that account for state-dependent regional and global climate responses. The experiments have two main applications: (1) to focus understanding of responses to CO2 forcing on states relevant to specific policy or scientific questions (e.g. change under low-forcing scenarios, the benefits of mitigation, or from past cold climates to the present day), or (2) to understand the state dependence (non-linearity) of climate change – i.e. why doubling the forcing may not double the response. State dependence (non-linearity) of responses can be large at regional scales, with important implications for understanding mechanisms and for general circulation model (GCM) emulation techniques (e.g. energy balance models and pattern-scaling methods). However, these processes are hard to explore using traditional experiments, which explains why they have had so little attention in previous studies. Some single model studies have established novel analysis principles and some physical mechanisms. There is now a need to explore robustness and uncertainty in such mechanisms across a range of models (point 2 above), and, more broadly, to focus work on understanding the response to CO2 on climate states relevant to specific policy/science questions (point 1). nonlinMIP addresses this using a simple, small set of CO2-forced experiments that are able to separate linear and non-linear mechanisms cleanly, with a good signal-to-noise ratio – while being demonstrably traceable to realistic transient scenarios. The design builds on the CMIP5 (Coupled Model Intercomparison Project Phase 5) and CMIP6 DECK (Diagnostic, Evaluation and Characterization of Klima) protocols, and is centred around a suite of instantaneous atmospheric CO2 change experiments, with a ramp-up–ramp-down experiment to test traceability to gradual forcing scenarios. In all cases the models are intended to be used with CO2 concentrations rather than CO2 emissions as the input. The understanding gained will help interpret the spread in policy-relevant scenario projections. Here we outline the basic physical principles behind nonlinMIP, and the method of establishing traceability from abruptCO2 to gradual forcing experiments, before detailing the experimental design, and finally some analysis principles. The test of traceability from abruptCO2 to transient experiments is recommended as a standard analysis within the CMIP5 and CMIP6 DECK protocols.

scholarly journals Time Variation of Effective Climate Sensitivity in GCMs

2008 ◽  
Vol 21 (19) ◽  
pp. 5076-5090 ◽  
Author(s):  
K. D. Williams ◽  
W. J. Ingram ◽  
J. M. Gregory
Keyword(s):  
Climate Sensitivity ◽  
Time Scale ◽  
General Circulation ◽  
Coupled Model ◽  
Circulation Model ◽  
Equilibrium Climate Sensitivity ◽  
Mixed Layer Ocean ◽  
Intercomparison Project ◽  
Apparent Variation ◽  
Centennial Time Scale

Abstract Effective climate sensitivity is often assumed to be constant (if uncertain), but some previous studies of general circulation model (GCM) simulations have found it varying as the simulation progresses. This complicates the fitting of simple models to such simulations, as well as having implications for the estimation of climate sensitivity from observations. This study examines the evolution of the feedbacks determining the climate sensitivity in GCMs submitted to the Coupled Model Intercomparison Project. Apparent centennial-time-scale variations of effective climate sensitivity during stabilization to a forcing can be considered an artifact of using conventional forcings, which only allow for instantaneous effects and stratospheric adjustment. If the forcing is adjusted for processes occurring on time scales that are short compared to the climate stabilization time scale, then there is little centennial-time-scale evolution of effective climate sensitivity in any of the GCMs. Here it is suggested that much of the apparent variation in effective climate sensitivity identified in previous studies is actually due to the comparatively fast forcing adjustment. Persistent differences are found in the strength of the feedbacks between the coupled atmosphere–ocean (AO) versions and their atmosphere–mixed layer ocean (AML) counterparts (the latter are often assumed to give the equilibrium climate sensitivity of the AOGCM). The AML model can typically only estimate the equilibrium climate sensitivity of the parallel AO version to within about 0.5 K. The adjustment to the forcing to account for comparatively fast processes varies in magnitude and sign between GCMs, as well as differing between AO and AML versions of the same model. There is evidence from one AOGCM that the forcing adjustment may take a couple of decades, with implications for observationally based estimates of equilibrium climate sensitivity. It is suggested that at least some of the spread in twenty-first-century global temperature predictions between GCMs is due to differing adjustment processes, hence work to understand these differences should be a priority.

scholarly journals GCAP 2.0: A global 3-D chemical-transport model framework for past, present, and future climate scenarios

2021 ◽  
Author(s):  
Lee Thomas Murray ◽  
Eric M. Leibensperger ◽  
Clara Orbe ◽  
Loretta J. Mickley ◽  
Melissa Sulprizio
Keyword(s):  
General Circulation ◽  
Transport Model ◽  
Coupled Model ◽  
Circulation Model ◽  
Chemical Transport ◽  
Recent Past ◽  
Chemical Transport Model ◽  
Model Framework ◽  
Intercomparison Project ◽  
Goddard Institute

Abstract. This manuscript describes version 2.0 of the Global Change and Air Pollution (GCAP 2.0) model framework, a one-way offline coupling between version E2.1 of the NASA Goddard Institute for Space Studies (GISS) general circulation model (GCM) and the GEOS-Chem global 3-D chemical-transport model (CTM). Meteorology for driving GEOS-Chem has been archived from the E2.1 contributions to Phase 6 of the Coupled Model Intercomparison Project (CMIP6) for the preindustrial and recent past. In addition, meteorology is available for the near future and end-of-the century for seven future scenarios ranging from extreme mitigation to extreme warming. Emissions and boundary conditions have been prepared for input to GEOS-Chem that are consistent with the CMIP6 experimental design. The model meteorology, emissions, transport and chemistry are evaluated in the recent past and found to be largely consistent with GEOS-Chem driven by the Modern-Era Retrospective analysis for Research and Applications Version 2 (MERRA-2) product and with observational constraints.

scholarly journals The HadGEM3-GA7.1 radiative kernel: the importance of a well-resolved stratosphere

2020 ◽  
Author(s):  
Christopher J. Smith ◽  
Ryan J. Kramer ◽  
Adriana Sima
Keyword(s):  
General Circulation ◽  
Climate Model ◽  
Coupled Model ◽  
Circulation Model ◽  
Atmospheric Model ◽  
Stratospheric Temperature ◽  
Linear Behaviour ◽  
Intercomparison Project ◽  
Stratospheric Cooling ◽  
The Uk

Abstract. We present top-of-atmosphere and surface radiative kernels based on the atmospheric component (GA7.1) of the HadGEM3 general circulation model developed by the UK Met Office. We show that the utility of radiative kernels for forcing adjustments in idealised CO2 perturbation experiments is most appropriate where there is sufficiently high resolution in the stratosphere in both the target climate model and the radiative kernel. This is because stratospheric cooling to a CO2 perturbation continues to increase with height, and low-resolution or low-top kernels or climate model output are unable to fully resolve the full stratospheric temperature adjustment. In the sixth phase of the Coupled Model Intercomparison Project (CMIP6), standard atmospheric model data is available up to 1 hPa on 19 pressure levels, which is a substantial advantage compared to CMIP5. We show in the IPSL-CM6A-LR model where a full set of climate diagnostics are available that the HadGEM3-GA7.1 kernel exhibits linear behaviour and the residual error term is small. From kernels available in the literature we recommend three kernels for adjustment calculations to CO2 and well-mixed greenhouse gas perturbations based on their stratospheric resolution: HadGEM3-GA7.1, ECMWF-Oslo, and ECHAM6. The HadGEM3-GA7.1 radiative kernels are available at https://doi.org/10.5281/zenodo.3594673 (Smith, 2019).

Long-term Surface Temperature (LoST) Database as a Complement for Transient and Control Preindustrial Simulations

2021 ◽  
Author(s):  
Francisco José Cuesta-Valero ◽  
Almudena García-García ◽  
Hugo Beltrami ◽  
Eduardo Zorita ◽  
Fernando Jaume Santero
Keyword(s):  
Surface Temperature ◽  
General Circulation ◽  
Climate Modeling ◽  
Ground Surface ◽  
Coupled Model ◽  
Circulation Model ◽  
Temperature Profiles ◽  
Intercomparison Project ◽  
Past Millennium

<div>Estimates of climate sensitivity from Atmosphere-Ocean Coupled General Circulation Model (GCM) simulations present a large spread despite the continued improvements in climate modeling since the 1970s. This variability is partially caused by the dependence of several long-term feedback mechanisms on the reference climate state. However, it is difficult to provide a reference to assess the climatology of preindustrial control simulations as there are no long-term preindustrial observations.<br>In the ground, recent changes in ground surface temperature are observed at shallow depths as perturbations to the quasi-steady state geothermal regime. However, if undisturbed by recent surface temperature changes, the deep ground temperatures vary linearly as a function of depth, and the extrapolation of this linear behavior to the surface can be interpreted as the past long-term surface temperature climatology.</div><div>We assemble a new gridded database of past long-term ground surface temperatures (LoST database) obtained from 514 borehole temperature profiles measured across North America, and we explore its use as a potential reference for the evaluation of GCM preindustrial control simulations and past millennium simulations. All temperature profiles are truncated at 300 m depth, allowing to estimate the ground surface climatology for the period 1300-1700 of the common era. We compare the LoST database with observations from the CRU database, as well as with five past millennium simulations and five preindustrial control simulations from the third phase of the Paleoclimate Modelling Intercomparison Project (PMIP3) and the fifth phase of the Coupled Model Intercomparison Project (CMIP5) archives. Our results suggest that LoST temperatures could be employed as a reference to narrow down the spread of surface temperature climatologies on GCM preindustrial control and past millennium simulations.</div>

scholarly journals Optimization of dam's spillway design under climate change conditions

2020 ◽  
Vol 22 (4) ◽  
pp. 916-936
Author(s):  
Ahmad Ferdowsi ◽  
Sayed-Farhad Mousavi ◽  
Saeed Farzin ◽  
Hojat Karami
Keyword(s):  
Climate Change ◽  
General Circulation ◽  
Coupled Model ◽  
Circulation Model ◽  
Cuckoo Search ◽  
Empirical Method ◽  
Flood Frequency ◽  
Flood Frequency Analysis ◽  
Design Flood ◽  
Invasive Weed

Abstract The present research introduces a model to find the best shape of a dam's spillway under climate change impacts, considering a benchmark problem (i.e., Ute Dam's labyrinth spillway in the Canadian River watershed, New Mexico, USA). A spillway design is based not only on historical data but also on the future hydrologic events. Climate variables were predicted for the years 2021–2050 based on three representative concentration pathway (RCP2.6, RCP4.5, and RCP8.5) scenarios of the general circulation model from the fifth phase of the coupled model intercomparison project (CMIP5) using the statistical downscaling model. Streamflow at the USGS 07226500 streamgage was simulated by a rainfall–runoff model with predicted data. Instantaneous peak flow was estimated using an empirical method. Flood frequency analysis was used for the estimation of the design flood. The shuffled frog-leaping algorithm (SFLA) is used to optimize a labyrinth spillway design and its results were compared with two other nature-inspired algorithms: invasive weed optimization (IWO) and cuckoo search (CS). The spillway was optimized once with the actual design flood (16,143 m3/s) and again with the design flood under climate change (12,250 m3/s). Results revealed that optimization with realistic design flood reduced the concrete volume of the spillway by 37% and under climate change by 43% using the SFLA.

scholarly journals The BRIDGE HadCM3 family of climate models: HadCM3@Bristol v1.0

2017 ◽  
Author(s):  
Paul J. Valdes ◽  
Edward Armstrong ◽  
Marcus P. S. Badger ◽  
Catherine D. Bradshaw ◽  
Fran Bragg ◽  
...  
Keyword(s):  
Climate Change ◽  
Ocean Circulation ◽  
Land Surface ◽  
General Circulation ◽  
Computational Models ◽  
Climate Models ◽  
Climate Model ◽  
Coupled Model ◽  
Circulation Model ◽  
Good Representation

Abstract. Understanding natural and anthropogenic climate change processes involves using computational models that represent the main components of the Earth system: the atmosphere, ocean, sea-ice and land surface. These models have become increasingly computationally expensive as resolution is increased and more complex process representations are included. However, to gain robust insight into how climate may respond to a given forcing, and to meaningfully quantify the associated uncertainty, it is often required to use either or both of ensemble approaches and very long integrations. For this reason, more computationally efficient models can be very valuable tools. Here we provide a comprehensive overview of the suite of climate models based around the coupled general circulation model HadCM3. This model was originally developed at the UK Met Office and has been heavily used during the last 15 years for a range of future (and past) climate change studies but is now largely being replaced by more recent models. However, it continues to be extensively used by the BRIDGE (Bristol Research Initiative for the Dynamic Global Environment) research group at the University of Bristol and elsewhere. Over time, adaptations have been made to the base HadCM3 model. These adaptations mean that the original documentation is not entirely representative, and several other configurations are in use which now differ from the originally described model versions. We therefore describe the key features of a number of configurations of the HadCM3 climate model family, including the atmosphere-only model (HadAM3), the coupled model with a low resolution ocean (HadCM3L), the high resolution atmosphere only model (HadAM3H), the regional model (HadRM3) and a fast coupled model (FAMOUS), which together make up HadCM3@Bristol version 1.0. These also include three versions of the land surface scheme. By comparing with observational datasets, we show that these models produce a good representation of many aspects of the climate system, including the land and sea surface temperatures, precipitation, ocean circulation and vegetation. This evaluation, combined with the relatively fast computational speed (up to 2000× faster than some CMIP6 models), motivates continued development and scientific use of the HadCM3 family of coupled climate models, particularly for quantifying uncertainty and for long multi-millennial scale simulations.

Sign in / Sign up

Export Citation Format

Share Document