scholarly journals Research on Gas-liquid Mixed Transportation Technological Adaptability: A Case Study of the Western Sichuan Gas Field

2017 ◽  
Vol 10 (1) ◽  
pp. 37-47
Author(s):  
Qingsha Zhou ◽  
Kun Huang ◽  
Yongchun Zhou
Keyword(s):  
Flow Simulation ◽  
Field Tests ◽  
Economic Benefits ◽  
Gas Production ◽  
Simulation Software ◽  
Rapid Decline ◽  
Gas Field ◽  
Western Sichuan ◽  
Field Development ◽  
Well Production

Background: The western Sichuan gas field belongs to the low-permeability, tight gas reservoirs, which are characterized by rapid decline in initial production of single-well production, short periods of stable production, and long periods of late-stage, low-pressure, low-yield production. Objective: It is necessary to continue pursuing the optimization of transportation processes. Method: This paper describes research on mixed transportation based on simplified measurements with liquid-based technology and the simulation of multiphase processes using the PIPEPHASE multiphase flow simulation software to determine boundary values for the liquid carrying process. Conclusion: The simulation produced several different recommendations for the production and maximum multiphase distance along with difference in elevation. Field tests were then conducted to determine the suitability of mixed transportation in western Sichuan, so as to ensure smooth progress with fluid metering, optimize the gathering process in order to achieve stable and efficient gas production, and improve the economic benefits of gas field development.

A Study on Hydrate Inhibition of Marginal Gas Field Development

2020 ◽  
Author(s):  
Hualei Yi
Keyword(s):  
Double Layer ◽  
Hydrate Formation ◽  
Economic Benefits ◽  
Development Project ◽  
Gas Production ◽  
Gas Field ◽  
Subsea Pipeline ◽  
Field Development ◽  
Development Engineering ◽  
First Time

Abstract In the marginal gas field development engineering, considering the low gas production with complex reservoir condition, it is difficult to develop independently because of the low economic efficiency. It is usually developed by relying on an existing offshore platform or facility nearby, in which hydrate inhibition is an important issue, and in order to inhibit hydrate formation in the subsea pipeline, hydrate inhibition method should be studied. Based on certain marginal gas field development project in South China Sea, which relies on nearby DPP platform, the paper studies methanol and MEG as inhibitor and application of double-layer insulated subsea pipeline. Finally by technical and economic comparisons, for the first time double-layer insulated pipeline is selected as the hydrate inhibition method to meet requirements of both relying on DPP and achieving better economic benefits, which is expected to provide reference for similar marginal gas field development.

Natural fractures in tight gas sandstones: a case study of the Upper Triassic Xujiahe Formation in Xinchang gas field, Western Sichuan Basin, China

2021 ◽  
pp. 1-18
Author(s):  
Yunzhao Zhang ◽  
Lianbo Zeng ◽  
Wenya Lyu ◽  
Dongsheng Sun ◽  
Shuangquan Chen ◽  
...  
Keyword(s):  
Production Capacity ◽  
Gas Production ◽  
Upper Triassic ◽  
Tight Gas ◽  
Natural Fractures ◽  
Carbon And Oxygen Isotopes ◽  
Gas Field ◽  
Xujiahe Formation ◽  
Western Sichuan ◽  
Tight Gas Reservoir

Abstract The Upper Triassic Xujiahe Formation is a typical tight gas reservoir in which natural fractures determine the migration, accumulation and production capacity of tight gas. In this study, we focused on the influences of natural fractures on the tight gas migration and production. We clarified characteristics and attributes (i.e. dips, apertures, filling degree and cross-cutting relationships) of the fractures based on image logging interpretations and core descriptions. Previous studies of electron spin resonance, carbon and oxygen isotopes, homogenization temperature of fluid inclusions analysis and basin simulation were considered. This study also analysed the fracture sequences, source of fracture fillings, diagenetic sequences and tight gas enrichment stages. We obtained insight into the relationship between fracture evolution and hydrocarbon charging, particularly the effect of the apertures and intensity of natural fractures on tight gas production. We reveal that the bedding fractures are short horizontal migration channels of tight gas. The tectonic fractures with middle, high and nearly vertical angles are beneficial to tight gas vertical migration. The apertures of fractures are controlled by the direction of maximum principal stress and fracture angle. The initial gas production of the vertical wells presents a positive correlation with the fracture abundance, and the intensity and aperture of fractures are the fundamental factors that determine the tight gas production. With these findings, this study is expected to guide the future exploration and development of tight gas with similar geological backgrounds.

Utilizing Pseudo Well Connections to Simulate Multi-Stage Hydraulic Fracturing - Example Based On the Study of a Tight Gas Asset

2021 ◽  
Author(s):  
Aamir Lokhandwala ◽  
Vaibhav Joshi ◽  
Ankit Dutt
Keyword(s):  
Hydraulic Fracturing ◽  
Oil And Gas ◽  
Flow Simulation ◽  
Oil And Gas Industry ◽  
Development Plan ◽  
Hydraulic Fractures ◽  
Tight Gas ◽  
Gas Field ◽  
Field Development ◽  
Fracture Modeling

Abstract Hydraulic fracturing is a widespread well stimulation treatment in the oil and gas industry. It is particularly prevalent in shale gas fields, where virtually all production can be attributed to the practice of fracturing. It is also used in the context of tight oil and gas reservoirs, for example in deep-water scenarios where the cost of drilling and completion is very high; well productivity, which is dictated by hydraulic fractures, is vital. The correct modeling in reservoir simulation can be critical in such settings because hydraulic fracturing can dramatically change the flow dynamics of a reservoir. What presents a challenge in flow simulation due to hydraulic fractures is that they introduce effects that operate on a different length and time scale than the usual dynamics of a reservoir. Capturing these effects and utilizing them to advantage can be critical for any operator in context of a field development plan for any unconventional or tight field. This paper focuses on a study that was undertaken to compare different methods of simulating hydraulic fractures to formulate a field development plan for a tight gas field. To maintaing the confidentiality of data and to showcase only the technical aspect of the workflow, we will refer to the asset as Field A in subsequent sections of this paper. Field A is a low permeability (0.01md-0.1md), tight (8% to 12% porosity) gas-condensate (API ~51deg and CGR~65 stb/mmscf) reservoir at ~3000m depth. Being structurally complex, it has a large number of erosional features and pinch-outs. The study involved comparing analytical fracture modeling, explicit modeling using local grid refinements, tartan gridding, pseudo-well connection approach and full-field unconventional fracture modeling. The result of the study was to use, for the first time for Field A, a system of generating pseudo well connections to simulate hydraulic fractures. The approach was found to be efficient both terms of replicating field data for a 10 year period while drastically reducing simulation runtime for the subsequent 10 year-period too. It helped the subsurface team to test multiple scenarios in a limited time-frame leading to improved project management.

DEEPWATER GAS FIELD PRODUCTION FROM SUBSEA WELLS INTO COMPRESSED NATURAL GAS CARRIERS THROUGH A HYBRID RISER TOWER

2005 ◽  
Vol 45 (1) ◽  
pp. 45
Author(s):  
J-F. Saint-Marcoux ◽  
C. White ◽  
G.O. Hovde
Keyword(s):  
Natural Gas ◽  
Eddy Currents ◽  
Gas Production ◽  
Lessons Learned ◽  
Concept Design ◽  
Vertical Load ◽  
Gas Field ◽  
Compressed Natural Gas ◽  
Field Development ◽  
Field Production

This paper addresses the feasibility of developing an ultra-deepwater gas field by producing directly from subsea wells into Compressed Natural Gas (CNG) Carrier ships. Production interruptions will be avoided as two Gas Production Storage Shuttle (GPSS) vessels storing CNG switch out roles between producing/storing via one of two Submerged Turret Production (STP) buoys and transport CNG to a remote offloading buoy. This paper considers the challenges associated with a CNG solution for an ultra-deepwater field development and the specific issues related to the risers. A Hybrid Riser Tower (HRT) concept design incorporating the lessons learned from the Girassol experience allows minimisation of the vertical load on the STP buoys. The production switchover system from one GPSS to the other is located at the top of the HRT. High-pressure flexible flowlines with buoyancy connect the flow path at the top of HRT to both STP buoys. System fabrication and installation issues, as well as specific met ocean conditions of the GOM, such as eddy currents, have been addressed. The HRT concept can be also used for tiebacks to floating LNG plants.

JOHN BROOKES GAS FIELD DEVELOPMENT

2005 ◽  
Vol 45 (1) ◽  
pp. 13
Author(s):  
A.J. McDiarmid ◽  
P.T. Bingaman ◽  
S.T. Bingham ◽  
B. Kirk-Burnnand ◽  
D.P. Gilbert ◽  
...  
Keyword(s):  
Low Cost ◽  
Time Frame ◽  
Gas Production ◽  
Gas Field ◽  
Initial Development ◽  
North West ◽  
Field Development ◽  
The North ◽  
Production Wells ◽  
Development Approach

The John Brookes gas field was discovered by the drilling of John Brookes–1 in October 1998 and appraisal drilling was completed in 2003. The field is located about 40 km northwest of Barrow Island on the North West Shelf, offshore West Australia. The John Brookes structure is a large (>90 km2) anticline with >100 m closure mapped at the base of the regional seal. Recoverable sales gas in the John Brookes reservoir is about 1 Tcf.Joint venture approval to fast track the development was gained in January 2004 with a target of first gas production in June 2005. The short development time frame required parallel workflows and use of a flexible/low cost development approach proven by Apache in the area.The John Brookes development is sized for off-take rates up to 240 TJ/d of sales gas with the development costing A$229 million. The initial development will consist of three production wells tied into an unmanned, minimal facility wellhead platform. The platform will be connected to the existing East Spar gas processing facilities on Varanus Island by an 18-inch multi-phase trunkline. Increasing the output of the existing East Spar facility and installation of a new gas sweetening facility are required. From Varanus Island, the gas will be exported to the mainland by existing sales gas pipelines. Condensate will be exported from Varanus Island by tanker.

scholarly journals An Approach to Estimation of Gas Reserve of Narshingdi Gas Field in Bangladesh with Dynamic Reservoir Simulation

2017 ◽  
Vol 29 (1) ◽  
pp. 19-23
Author(s):  
Farhana Akter
Keyword(s):  
Reservoir Simulation ◽  
Chemical Engineering ◽  
National Level ◽  
Development Stage ◽  
Gas Production ◽  
Rock Properties ◽  
Reserve Estimation ◽  
Gas Field ◽  
Field Development ◽  
Increasing Demand

Increasing demand of fuel globally formulates gas as one of the most valuable natural resources. There is lot of uncertainties in estimating hydrocarbon volume correctly from exploration to development stage of a gas field. The accuracy and reliability of data (reservoir geological model, fluid and rock properties) make the implement very hard-hitting. So estimating and updating the gas reserve has become vital issue, as it helps the planners for drawing mid-term and long-term development plan from field development level to national level. This paper presents the study of reserve estimation of a Narshingdi Gas Field in Bangladesh. In this paper, a dynamic reservoir simulation model has been used to perform a history match ?pressure and production? using commercial simulator for reserve estimation. The result of this study is expected to provide Gas Initially in Place (GIIP) and recoverable gas volume. Simultaneously three forecast scenarios have also been investigated. There is no strong aquifer pressure support in the producing gas zone, so gas production continues from the reservoir due to pressure depletion.Journal of Chemical Engineering, Vol. 29, No. 1, 2017: 19-23

Remote-Controlled Automated Foam Injection: A Digital Solution to Liquid Loading in a China Unconventional Gas Development

2021 ◽  
Author(s):  
Jiang Wei Bo ◽  
Beryl Audrey ◽  
Uzezi Orivri ◽  
Nian Xi Wang ◽  
Xiang Yang Qiao ◽  
...  
Keyword(s):  
Remote Control ◽  
Continuous Production ◽  
Weather Conditions ◽  
Gas Production ◽  
Liquid Loading ◽  
Gas Field ◽  
Field Development ◽  
Operational Risks ◽  
Tight Gas Reservoir ◽  
Unconventional Gas Development

Abstract Gas field C is an unconventional tight gas reservoir located in the central of China which has prominent characteristics, including thin formation, low permeability and poor reservoir connectivity which significantly impact on the field development. Horizontal wells multistage hydraulic fracturing has been proven to be an effective technique to recover the hydrocarbons from this gas field. However, with continuous production overtime, reservoir pressure declines which results in a decrease in gas production rate below the critical gas velocity, leading to accumulation of liquid in the wellbore (liquid loading), which further results in back pressure and damage to the formation. Currently, gas field C loses up to 1500 mmscf/year in gas production and associated revenue due to liquid loading. Some other factors which hinders effective deliquification of the gas wells include remote well pad locations, poor road conditions during harsh weather conditions, friction with local communities, limited manpower to daily effectively analyze over 200 wells for liquid loading diagnostics and operational risks during well intervention. To tackle these challenges, a new versatile intelligent dosing technology has been piloted to reduce liquid loading. This remote-control dosing unit is located at the well pad and is equipped with automatic valves that can dispense two different chemicals (soap and methanol) in one unit. A key new feature of this system is the ability to receive and implement instructions that optimizes the dosing rate and frequency. This remote-control functionality eliminates on-site operator intervention and HSE risks especially in winter when the well pads could be inaccessible with poor road conditions.

scholarly journals Media corrosiveness and materials resistance at presence of aggressive carbon dioxide

2021 ◽  
Vol 64 (11) ◽  
pp. 793-801
Author(s):  
R. R. Kantyukov ◽  
D. N. Zapevalov ◽  
R. K. Vagapov
Keyword(s):  
Carbon Dioxide ◽  
Oil And Gas ◽  
Gas Production ◽  
Carbon Dioxide Corrosion ◽  
Gas Field ◽  
Hydrocarbon Production ◽  
Field Development ◽  
Wide Range ◽  
Corrosive Effect ◽  
Equipment And Pipelines

At the present stage of gas field development, the products of many mining facilities have increased content of corrosive CO2 . The corrosive effect of CO2 on steel equipment and pipelines is determined by the conditions of its use. CO2 has a potentially wide range of usage at oil and gas facilities for solving technological problems (during production, transportation, storage, etc.). Simulation tests and analysis were carried out to assess the corrosion effect of CO2 on typical steels (carbon, low-alloy and alloyed) used at field facilities. Gas production facilities demonstrate several corrosion formation zones: lower part of the pipe (when moisture accumulates) and top of the pipe (in case of moisture condensation). The authors have analyzed the main factors influencing the intensity of carbon dioxide corrosion processes at hydrocarbon production with CO2 , its storage and use for various technological purposes. The main mechanism for development of carbon dioxide corrosion is presence/condensation of moisture, which triggers the corrosion process, including the formation of local defects (pits, etc.). X-ray diffraction was used for the analysis of corrosion products formed on the steel surface, which can have different protective characteristics depending on the phase state (amorphous or crystalline).

scholarly journals Integrated Field Development Plans of Akkas Gas Field

2020 ◽  
Vol 10 (3) ◽  
pp. 102-122
Author(s):  
Dr. Jalal A. Al-Sudani ◽  
Eng. Adnan N. Sajet ◽  
Eng. Jalal Ahmed ◽  
Eng. Mohamed Enad ◽  
Dr. Abdul-Hussain H. Al-Shibly ◽  
...  
Keyword(s):  
Net Present Value ◽  
Planning Process ◽  
Development Planning ◽  
Gas Production ◽  
Recovery Factor ◽  
Western Desert ◽  
Discounted Cash Flow ◽  
Gas Field ◽  
Field Development ◽  
Development Plans

Akkas gas field is the biggest natural gas field in Iraq that is located in the western desert area. The field contains around (9 BSCF) of approved gas reserve from the conventional rock source. This paper presents field development planning process combined with economic analysis comprises, the number of wells that yields in maximum net present value (NPV), the recovery factor and raw gas production rates for the total number of suggested wells that have been estimated, as well as the cumulative gas produced with time. The development plans were elaborated concerning different types of well geometries and operational constraints. Full comparison analysis for all presented plans regarding NPV, recovery factor, discounted cash flow versus production time, forecasted production rate, as well as forecasted cumulative production with time have been presented. Sensitivity analysis has been made to determine well and reservoir controlling parameters that leads for best operating field development plans. The study shows the effectiveness of horizontal well type compared with vertical wells; as well as, the effect of reservoir permeability on field development plans, the results show that the field could be operated at target plateau rates of (250, 500 and 750 MMSCF/D). It also shows the superior effect of stimulation processes in increasing the NPV and field recovery factor using less number of wells

Optimizing Tubing and Liner Completion Design to Improve Gas Production from Existing Wells: Case Study for ADNOC Onshore Field Abu Dhabi, UAE

2021 ◽  
Author(s):  
Magdy Farouk Fathalla ◽  
Mariam Ahmed Al Hosani ◽  
Ihab Nabil Mohamed ◽  
Ahmed Mohamed Al Bairaq ◽  
Djamal Kherroubi ◽  
...  
Keyword(s):  
Gas Production ◽  
Base Case ◽  
Gas Wells ◽  
Production Rates ◽  
Liquid Loading ◽  
Gas Field ◽  
Well Production ◽  
Well Completion ◽  
The Impact

Abstract An onshore gas field contains several gas wells which have low–intermittent production rates. The poor production has been attributed to liquid loading issue in the wellbore. This study will investigate the impact of optimizing the tubing and liner completion design to improve the gas production rates from the wells. Numerous sensitivity runs are carried out with varying tubing and liner dimensions, to identity optimal downhole completions design. The study begins by identifying weak wells having severe gas production problems. Once the weak wells have been identified, wellbore schematics for those wells are studied. Simulation runs are performed with the current downhole completion design and this will be used as the base case. Several completion designs are considered to minimize the effect of liquid loading in the wells; these include reducing the tubing diameter but keeping the existing liner diameter the same, keeping the original tubing diameter the same but only reducing the liner diameter, extending the tubing to the Total Depth (TD) while keeping the original tubing diameter, and extending a reduced diameter tubing string to the TD. The primary cause of the liquid loading seems to be the reduced velocity of the incoming gas from the reservoir as it flows through the wellbore. A simulation study was performed using the various completion designs to optimize the well completion and achieve higher gas velocities in the weak wells. The results of the study showed significant improvement in gas production rates when the tubing diameter and liner diameter were reduced, providing further evidence that increased velocity of the incoming fluids due to restricted flow led to less liquid loading. The paper demonstrates the impact of downhole completion design on the productivity of the gas wells. The study shows that revisiting the existing completion designs and optimizing them using commercial simulators can lead to significant improvement in well production rates. It is also noted that restricting the flow near the sand face increases the velocity of the incoming fluid and reduces liquid loading in the wells.

Sign in / Sign up

Export Citation Format

Share Document