Comparative Analysis on the Elastic Behavior of Composite Materials Based on Plant Fibers: Bamboo / Epoxy and Coconut / Epoxy

2020 ◽  
Vol 12 (2) ◽  
pp. 127-135
Author(s):  
Allel Mokaddem ◽  
Bendouma Doumi ◽  
Mohammed Belkheir ◽  
Amina Touimi
Keyword(s):  
Mechanical Properties ◽  
Comparative Analysis ◽  
Composite Materials ◽  
Experimental Tests ◽  
Elastic Behavior ◽  
Coconut Fiber ◽  
Plant Fibers ◽  
Shear Damage ◽  
Vegetable Fibers ◽  
Genetic Simulation

Background: The exploitation by the industries of vegetable fibers in the field of composite materials has made it possible to reduce the dependency of oil which is the result of their mechanical properties, their thermal resistance and biodegradability. Methods: In this work, we carried out a comparative study by a genetic simulation on two materials based on different natural reinforcements (Bamboo and Coconut) to see the influence of its fibers on the elastic behavior of bio-composite materials. Results: The results of our genetic simulation showed that Bamboo / Epoxy is more resistant than Coconut / Epoxy and that shear damage of Bamboo / Epoxy is lower than that of Coconut / Epoxy by 11 to 12.5%. Conclusion: The results are similar to the results given by Rao KMM where he showed by experimental tests that Bamboo fiber is the most resistant when compared with other fibers especially coconut fiber.

scholarly journals Influence of Alkali Treatment on the Microstructure and Mechanical Properties of Coir and Abaca Fibers

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2636
Author(s):  
Petr Valášek ◽  
Miroslav Müller ◽  
Vladimír Šleger ◽  
Viktor Kolář ◽  
Monika Hromasová ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Alkali Treatment ◽  
Fiber Surface ◽  
Cellulose Fibers ◽  
Sem Analysis ◽  
Experimental Program ◽  
Time Interval ◽  
The European Union ◽  
Vegetable Fibers

Composite materials with natural fillers have been increasingly used as an alternative to synthetically produced materials. This trend is visible from a representation of polymeric composites with natural cellulose fibers in the automotive industry of the European Union. This trend is entirely logical, owing to a preference for renewable resources. The experimental program itself follows pronounced hypotheses and focuses on a description of the mechanical properties of untreated and alkali-treated natural vegetable fibers, coconut and abaca fibers. These fibers have great potential for use in composite materials. The results and discussion sections contribute to an introduction of an individual methodology for mechanical property assessment of cellulose fibers, and allows for a clear definition of an optimal process of alkalization dependent on the content of hemicellulose and lignin in vegetable fibers. The aim of this research was to investigate the influence of alkali treatment on the surface microstructure and tensile properties of coir and abaca fibers. These fibers were immersed into a 5% solution of NaOH at laboratory temperature for a time interval of 30 min, 1 h, 2 h, 3 h, 6 h, 12 h, 24 h, and 48 h, rinsed and dried. The fiber surface microstructures before and after the alkali treatment were evaluated by SEM (scanning electron microscopy). SEM analysis showed that the alkali treatment in the NaOH solution led to a gradual connective material removal from the fiber surface. The effect of the alkali is evident from the visible changes on the surface of the fibers.

Investigation of the Mechanical Behavior of Natural Vegetable Fibers Used in Composite Materials for Structural Strengthening

2021 ◽  
Vol 888 ◽  
pp. 15-21
Author(s):  
Ivelina Ivanova ◽  
Jules Assih ◽  
Dimitar Dontchev
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Fiber Composite ◽  
Low Cost ◽  
Weight Ratio ◽  
Synthetic Fiber ◽  
Engineering Structures ◽  
Hemp Fiber ◽  
Plant Fibers ◽  
Hemp Fibers

This research aims at studying the mechanical properties of industrial hemp fibers and promoting their use as a reinforcing composite material for strengthening of civil engineering structures. Natural hemp fibers are of great interest due to the following advantages they have: low cost, high strength-to-weight ratio, low density and non-corrosive properties. The use of plant fiber composite materials has increased significantly in recent years because of the negative reduction impact on the environment. For example, the tendency to use renewable resources and their possibility for recycling. They cause fewer health and environmental problems than synthetic fibers. Natural fibers, in addition to environmental aspects, have advantages such as low densities, i.e. have low weight, interesting mechanical properties comparable to those of synthetic fiber materials, and last but not least, low cost. Composites based on natural plant fibers can be used to reinforce or repair reinforced concrete structures, as shown by research on flax fiber composites. These concretes specimens strengthened with biocomposite materials have very good resistance to bending and significantly increase the rigidity of the structure. The results show that the hemp fiber reinforcement has significant effects on the strengthening and increase in flexural strength from 8% to 35 %.

Non-Wood Lignocellulosic Composites

2014 ◽  
pp. 281-319 ◽  
Author(s):  
Marius C. Barbu ◽  
Roman Reh ◽  
Ayfer Dönmez Çavdar
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Experimental Studies ◽  
Raw Material ◽  
Synthetic Fiber ◽  
Plant Fibers ◽  
Labor Conditions ◽  
Appropriate Treatment ◽  
Manufacturing Technologies ◽  
Cellulose Materials

It would seem that with appropriate treatment almost any agricultural residue may be used as a suitable raw material for the wood-based panels like particle- and fiberboard production. The literature on wood-ligno-cellulose plant composite boards highlights steady interest for the design of new structures and technologies towards products for special applications with higher physical-mechanical properties at relatively low prices. Experimental studies have revealed particular aspects related to the structural composition of ligno-cellulose materials, such as the ratio between the different composing elements, their compatibility, and the types and characteristics of the used resins. Various technologies have been developed for designing and processing composite materials by pressing, extrusion, airflow forming, dry, half-dry, and wet processes, including thermal, chemical, thermo-chemical, thermo-chemo-mechanical treatments, etc. Researchers have undertaken to determine the manufacturing parameters and the physical-mechanical properties of the composite boards and to compare them with the standard PB, MDF, HB, SB made from single-raw material (wood). A great emphasis is placed on the processability of the ligno-cellulose composite boards by classical methods, by modified manufacturing processes, on the types of tools and processing equipment, the automation of the manufacturing technologies, the specific labor conditions, etc. The combinations of wood and plant fibers are successful, since there is obvious compatibility between the macro- and microscopic structures, their chemical composition, and the relatively low manufacturing costs and high performances, as compared to synthetic fiber-based composite materials.

The Effect of the Drying Temperature on the Moisture Removal and Mechanical Properties of Sisal Fibers

2017 ◽  
Vol 380 ◽  
pp. 66-71 ◽  
Author(s):  
D. Gomes dos Santos ◽  
A.G. Barbosa de Lima ◽  
P. de Sousa Costa
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Moisture Content ◽  
Raw Material ◽  
Moisture Removal ◽  
Heating Rates ◽  
Drying Temperature ◽  
Vegetable Fibers ◽  
Drying Condition ◽  
Sisal Fibers

Vegetable fibers have been used in most several applications, as raw material, for manufacturing of different products or directly as reinforcement in composite materials. Green fibers are wet, what requires its drying before their use.In this sense, the aim of this work is to study drying of the sisal fibers in oven. Drying experiments were carried out at different drying condition. It was evaluated the curves of moisture content, drying and heating rates and temperature, as well as the influence of the drying temperature on the mechanical properties of the fibers. It was found that the drying temperature (60 - 105°C) had no significant influence on the tensile mechanical properties, elongation at rupture and modulus of elasticity of the sisal fibers.

Current Research and Patents of Plant Fiber Composites

2019 ◽  
Vol 12 (1) ◽  
pp. 37-44
Author(s):  
Jiankang Wang ◽  
Zhijian Li ◽  
Hongwei Lu
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Fiber Composite ◽  
Fiber Composites ◽  
Living Environment ◽  
Processing Technology ◽  
Plant Fiber ◽  
Plant Fibers ◽  
Processing Properties ◽  
Fiber Composite Materials

Background: With the improvement of environment protection awareness, human beings have gradually become aware of that the plastic products, waste are harmful to the human living environment. Therefore, research and application of biodegradable materials that do not rely on petroleum resources have become hot topics. Researchers have accelerated the development and promotion of plant fiber because they are good flexibility, relatively rough surface and biodegradable. Objective: The development of plant fiber composites is reviewed, including composition ratio, interfacial modification, processing technology, and the effects of these technologies on the properties of plant fiber composites. Methods: The paper reviews various patents and research developments about plant fiber composite materials. It also analyzes the advantages and disadvantages of various patents and technologies from the aspects of biodegradable ability, mechanical properties, dispersing performance, processing properties, cost, and so on. Results: The component proportion, interface modification, and processing technology of plant fiber composite materials are prospected to improve the quality and application of the plant fiber composite materials in the future development. Conclusion: The considerable attention has been paid on the technology of biodegradable plant fiber composite. The recent patents and technologies have shown us a wider application in biodegradable plant fiber composite. The problems how to improve the mechanical properties of plant fibers, the dispersion properties of plant fibers and resins, and the processing properties of composite materials, will need more and more methods and equipment to solve or simplify.

Non-Wood Lignocellulosic Composites

2017 ◽  
pp. 947-977 ◽  
Author(s):  
Marius C. Barbu ◽  
Roman Reh ◽  
Ayfer Dönmez Çavdar
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Experimental Studies ◽  
Raw Material ◽  
Synthetic Fiber ◽  
Plant Fibers ◽  
Labor Conditions ◽  
Appropriate Treatment ◽  
Manufacturing Technologies ◽  
Cellulose Materials

It would seem that with appropriate treatment almost any agricultural residue may be used as a suitable raw material for the wood-based panels like particle- and fiberboard production. The literature on wood-ligno-cellulose plant composite boards highlights steady interest for the design of new structures and technologies towards products for special applications with higher physical-mechanical properties at relatively low prices. Experimental studies have revealed particular aspects related to the structural composition of ligno-cellulose materials, such as the ratio between the different composing elements, their compatibility, and the types and characteristics of the used resins. Various technologies have been developed for designing and processing composite materials by pressing, extrusion, airflow forming, dry, half-dry, and wet processes, including thermal, chemical, thermo-chemical, thermo-chemo-mechanical treatments, etc. Researchers have undertaken to determine the manufacturing parameters and the physical-mechanical properties of the composite boards and to compare them with the standard PB, MDF, HB, SB made from single-raw material (wood). A great emphasis is placed on the processability of the ligno-cellulose composite boards by classical methods, by modified manufacturing processes, on the types of tools and processing equipment, the automation of the manufacturing technologies, the specific labor conditions, etc. The combinations of wood and plant fibers are successful, since there is obvious compatibility between the macro- and microscopic structures, their chemical composition, and the relatively low manufacturing costs and high performances, as compared to synthetic fiber-based composite materials.

scholarly journals Rush Fibers Reinforced Adobe for Sustainable Building

2020 ◽  
Vol 9 (1) ◽  
pp. 2304-2310
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Low Cost ◽  
Low Density ◽  
Energy Materials ◽  
Plant Fibers ◽  
Sustainable Building ◽  
Synthetic Fibers ◽  
Glass Carbon ◽  
Raw Earth

Little consume energy materials have recently received increased attention as an ecological and sustainable alternative. We propose to study a building approach with raw earth (adobe) combined with plant fibers. The latter used as reinforcement in composite materials have specific competitive mechanical properties compared to those of synthetic fibers (glass, carbon, ...) and are an environmentally friendly alternative to these fibers because of their low cost, low density, biodegradability and availability. We describe adobe stabilization and reinforcement process with treated rush fibers. We introduce our approach to formulate an earth mortar allowing the making of blocks of adobe, intended for the construction of works such as walls, arches and domes.

METHODS OF TESTING RING SAMPLES MADE OF PLASTIC COMPOSITE MATERIALS USED IN THE AVIATION INDUSTRY AND THE ESTIMATED EVALUATION OF THEIR EFFECTIVENESS

2019 ◽  
Vol 6 (4) ◽  
pp. 68-71
Author(s):  
Mikhail Mikhailovich Polovin ◽  
Egor Vadimovich Nazarov ◽  
Evgeniy Vasilyevich Zhuravlev ◽  
Denis Sergeevich Shavelkin
Keyword(s):  
Mechanical Properties ◽  
Comparative Analysis ◽  
Composite Materials ◽  
Aviation Industry ◽  
Advantages And Disadvantages ◽  
Plastic Composite ◽  
Materials Used ◽  
Definition Of ◽  
The Given

In relation to the increase in the proportion of composite materials used in the design of modern aircraft, the most acute issue is the issue of confirming the characteristics of materials during their testing. In this paper, the methods of testing composite materials used in the elements of the glider design are analyzed, and the estimated assessment of the methods analyzed is made.Within the limits of the given work the comparative analysis of existing and perspective methods of carrying out of tests of ring samples from composite materials for the purpose of an estimation of their efficiency regarding definition of mechanical properties is carried out. The advantages and disadvantages of each method are determined.

Sign in / Sign up

Export Citation Format

Share Document