A characterization of the 0-basis homogeneous bounding degrees

2010 ◽  
Vol 75 (3) ◽  
pp. 971-995
Author(s):  
Karen Lange
Keyword(s):  
Homogeneous Model ◽  
Countable Model

AbstractWe say a countable model has a 0-basis if the types realized in are uniformly computable. We say has a (d-)decidable copy if there exists a model ≅ such that the elementary diagram of is (d-)computable. Goncharov, Millar, and Peretyat'kin independently showed there exists a homogeneous model with a 0-basis but no decidable copy. We extend this result here. Let d ≤ 0′ be any low2 degree. We show that there exists a homogeneous model with a 0-basis but no d-decidable copy. A degree d is 0-basis homogeneous bounding if any homogenous with a 0-basis has a d-decidable copy. In previous work, we showed that the non low2 Δ20 degrees are 0-basis homogeneous bounding. The result of this paper shows that this is an exact characterization of the 0-basis homogeneous bounding Δ20 degrees.

On the number of countable homogeneous models

1983 ◽  
Vol 48 (3) ◽  
pp. 539-541 ◽  
Author(s):  
Libo Lo
Keyword(s):  
Homogeneous Model ◽  
Countable Model ◽  
The Other ◽  
Reduced Model ◽  
Elementary Extension ◽  
Other Hand ◽  
Homogeneous Models ◽  
Countable Theory ◽  
Countable Models

The number of homogeneous models has been studied in [1] and other papers. But the number of countable homogeneous models of a countable theory T is not determined when dropping the GCH. Morley in [2] proves that if a countable theory T has more than ℵ1 nonisomorphic countable models, then it has such models. He conjectures that if a countable theory T has more than ℵ0 nonisomorphic countable models, then it has such models. In this paper we show that if a countable theory T has more than ℵ0 nonisomorphic countable homogeneous models, then it has such models.We adopt the conventions in [1]–[3]. Throughout the paper T is a theory and the language of T is denoted by L which is countable.Lemma 1. If a theory T has more than ℵ0types, then T hasnonisomorphic countable homogeneous models.Proof. Suppose that T has more than ℵ0 types. From [2, Corollary 2.4] T has types. Let σ be a Ttype with n variables, and T′ = T ⋃ {σ(c1, …, cn)}, where c1, …, cn are new constants. T′ is consistent and has a countable model (, a1, …, an). From [3, Theorem 3.2.8] the reduced model has a countable homogeneous elementary extension . σ is realized in . This shows that every type σ is realized in at least one countable homogeneous model of T. But each countable model can realize at most ℵ0 types. Hence T has at least countable homogeneous models. On the other hand, a countable theory can have at most nonisomorphic countable models. Hence the number of nonisomorphic countable homogeneous models of T is .In the following, we shall use the languages Lα (α = 0, 1, 2) defined in [2]. We give a brief description of them. For a countable theory T, let K be the class of all models of T. L = L0 is countable.

Omitting models

1977 ◽  
Vol 42 (1) ◽  
pp. 29-32
Author(s):  
Ernest Snapper
Keyword(s):  
Homogeneous Model ◽  
Countable Model ◽  
Complete Theory ◽  
Finite Set ◽  
Homogeneous Models ◽  
Definition Of ◽  
General Aspects ◽  
The Universe ◽  
Main Definition ◽  
Countable Models

The purpose of this paper is to introduce the notion of “omitting models” and to derive a very natural theorem concerning it (Theorem 1). A corollary of this theorem is the remarkable theorem of Vaught [3] which states that a countable complete theory cannot have precisely two nonisomorphic countable models. In fact, we show that our theorem implies Rosenstein's theorem [2] which, in turn, implies Vaught's theorem.T stands for a countable complete theory whose (countable) language is denoted by L. Following [1], a countably homogeneous model of T is a countable model of T with the property that, for any two n-tuples a1, …, an and b1,…,bn of the universe of whose types are the same, there is an automorphism of which maps ai, on bi, for i = 1, …, n [1, p. 129 and Proposition 3.2.9, p. 131]. “Homogeneous model” always means “countably homogeneous model.” “Type of T” always stands for “n-type of T” where n ≥ s 0, i.e., for the type of some n-tuple of individuals of the universe of some model of T. We often use that two homogeneous models which realize the same types are isomorphic [1, Proposition 3.2.9, p. 131].It is well known that every type of T is realized by at least one countable model of T. The main definition of this paper is:Definition 1. A set of countable models of T is omissible or “may be omitted” if every type of T is realized by at least one countable model of T which is not isomorphic to a model in the set.The main theorem of the paper is:Theorem 1. If a countable complete theory is not ω-categorical, every finite set of its homogeneous models may be omitted.The theorem is proved in §1 and in §2 it is shown how Vaught's and Rosenstein's theorems follow from it. §3 discusses some general aspects of omitting models.

The degree spectra of homogeneous models

2008 ◽  
Vol 73 (3) ◽  
pp. 1009-1028 ◽  
Author(s):  
Karen Lange
Keyword(s):  
Analogous Result ◽  
Homogeneous Model ◽  
Countable Model ◽  
Turing Degree ◽  
Decidable Theory ◽  
Degree Spectra ◽  
Homogeneous Models ◽  
Nonzero Degree

AbstractMuch previous study has been done on the degree spectra of prime models of a complete atomic decidable theory. Here we study the analogous questions for homogeneous models. We say a countable model has a d-basis if the types realized in are all computable and the Turing degree d can list -indices for all types realized in . We say has a d-decidable copy if there exists a model ≅ such that the elementary diagram of is d-computable. Goncharov, Millar, and Peretyat'kin independently showed there exists a homogeneous with a 0-basis but no decidable copy.We prove that any homogeneous with a 0′-basis has a low decidable copy. This implies Csima's analogous result for prime models. In the case where all types of the theory T are computable and is a homogeneous model with a 0-basis, we show has copies decidable in every nonzero degree. A degree d is 0-homogeneous bounding if any automorphically nontrivial homogeneous with a 0-basis has a d-decidable copy. We show that the nonlow2 degrees are 0-homogeneous bounding.

Nonlinear Analysis of Heterogeneous Model for an Industrial Ammonia Reactor

2009 ◽  
Vol 4 (2) ◽  
Author(s):  
Erasmo Mancusi ◽  
Pier Luca Maffettone ◽  
Francesco Gioia ◽  
Silvestro Crescitelli
Keyword(s):  
Control Strategy ◽  
Homogeneous Model ◽  
Operating Conditions ◽  
Ammonia Production ◽  
Catalytic Reactors ◽  
Heterogeneous Model ◽  
Model Predictions ◽  
Catalyst Pellets ◽  
And Control

Ammonia production is generally carried out in multiphase catalytic reactors. In this paper we analyze an industrial reactor for ammonia production with a dynamic heterogeneous model that accounts for transport resistance both inside and outside catalyst pellets. The work is aimed at investigating the possible appearance of periodic solutions in normal operating conditions for their relevance in terms of safety and control strategy. The analysis is based on a continuation approach to determine the bifurcational characterization of model predictions. This description is compared with that derived in a previous work (Mancusi et al. 2000), which was based on a simpler pseudo-homogeneous model of the same process.

Morphological Characterization of Mycobacteriophage R1

1974 ◽  
Vol 32 ◽  
pp. 254-255
Author(s):  
B. L. Soloff ◽  
T. A. Rado
Keyword(s):  
Carbon Source ◽  
Stationary Phase ◽  
Growth Phase ◽  
Minimal Medium ◽  
Morphological Characterization ◽  
Logarithmic Growth Phase ◽  
Complete Lysis ◽  
Lysogenic Culture ◽  
Logarithmic Growth

Mycobacteriophage R1 was originally isolated from a lysogenic culture of M. butyricum. The virus was propagated on a leucine-requiring derivative of M. smegmatis, 607 leu−, isolated by nitrosoguanidine mutagenesis of typestrain ATCC 607. Growth was accomplished in a minimal medium containing glycerol and glucose as carbon source and enriched by the addition of 80 μg/ ml L-leucine. Bacteria in early logarithmic growth phase were infected with virus at a multiplicity of 5, and incubated with aeration for 8 hours. The partially lysed suspension was diluted 1:10 in growth medium and incubated for a further 8 hours. This permitted stationary phase cells to re-enter logarithmic growth and resulted in complete lysis of the culture.

AEM analysis of crystallization in Ti-based amorphous alloys

1983 ◽  
Vol 41 ◽  
pp. 270-271
Author(s):  
A.R. Pelton ◽  
A.F. Marshall ◽  
Y.S. Lee
Keyword(s):  
Magnetic Properties ◽  
Amorphous Alloys ◽  
Amorphous Materials ◽  
Isothermal Annealing ◽  
Amorphous Matrix ◽  
Nucleation And Growth ◽  
Current Interest ◽  
Amorphous Films ◽  
Electrical And Magnetic Properties

Amorphous materials are of current interest due to their desirable mechanical, electrical and magnetic properties. Furthermore, crystallizing amorphous alloys provides an avenue for discerning sequential and competitive phases thus allowing access to otherwise inaccessible crystalline structures. Previous studies have shown the benefits of using AEM to determine crystal structures and compositions of partially crystallized alloys. The present paper will discuss the AEM characterization of crystallized Cu-Ti and Ni-Ti amorphous films.Cu60Ti40: The amorphous alloy Cu60Ti40, when continuously heated, forms a simple intermediate, macrocrystalline phase which then transforms to the ordered, equilibrium Cu3Ti2 phase. However, contrary to what one would expect from kinetic considerations, isothermal annealing below the isochronal crystallization temperature results in direct nucleation and growth of Cu3Ti2 from the amorphous matrix.

Characterization of Coherent, Ordered Precipitates in Nickel-Base Alloys

1973 ◽  
Vol 31 ◽  
pp. 144-145
Author(s):  
B. H. Kear ◽  
J. M. Oblak
Keyword(s):  
Stable Phase ◽  
Nickel Base Superalloy ◽  
Alloy 718 ◽  
Commercial Alloy ◽  
Precipitate Morphology ◽  
Continuous Precipitation ◽  
Nickel Base ◽  
Base Superalloy ◽  
Strengthening Precipitate

A nickel-base superalloy is essentially a Ni/Cr solid solution hardened by additions of Al (Ti, Nb, etc.) to precipitate a coherent, ordered phase. In most commercial alloy systems, e.g. B-1900, IN-100 and Mar-M200, the stable precipitate is Ni3 (Al,Ti) γ′, with an LI2structure. In A lloy 901 the normal precipitate is metastable Nis Ti3 γ′ ; the stable phase is a hexagonal Do2 4 structure. In Alloy 718 the strengthening precipitate is metastable γ″, which has a body-centered tetragonal D022 structure.Precipitate MorphologyIn most systems the ordered γ′ phase forms by a continuous precipitation re-action, which gives rise to a uniform intragranular dispersion of precipitate particles. For zero γ/γ′ misfit, the γ′ precipitates assume a spheroidal.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Skeletal elements of crinoid echinoderms: High-resolution structural and microanalytical results

1983 ◽  
Vol 41 ◽  
pp. 194-195
Author(s):  
D. F. Blake ◽  
L. F. Allard ◽  
D. R. Peacor
Keyword(s):  
High Resolution ◽  
Marine Invertebrates ◽  
Sea Urchins ◽  
Structural Features ◽  
Sea Stars ◽  
High Resolution Tem ◽  
Relationship Of ◽  
The Relationship ◽  
Insight Into

Echinodermata is a phylum of marine invertebrates which has been extant since Cambrian time (c.a. 500 m.y. before the present). Modern examples of echinoderms include sea urchins, sea stars, and sea lilies (crinoids). The endoskeletons of echinoderms are composed of plates or ossicles (Fig. 1) which are with few exceptions, porous, single crystals of high-magnesian calcite. Despite their single crystal nature, fracture surfaces do not exhibit the near-perfect {10.4} cleavage characteristic of inorganic calcite. This paradoxical mix of biogenic and inorganic features has prompted much recent work on echinoderm skeletal crystallography. Furthermore, fossil echinoderm hard parts comprise a volumetrically significant portion of some marine limestones sequences. The ultrastructural and microchemical characterization of modern skeletal material should lend insight into: 1). The nature of the biogenic processes involved, for example, the relationship of Mg heterogeneity to morphological and structural features in modern echinoderm material, and 2). The nature of the diagenetic changes undergone by their ancient, fossilized counterparts. In this study, high resolution TEM (HRTEM), high voltage TEM (HVTEM), and STEM microanalysis are used to characterize tha ultrastructural and microchemical composition of skeletal elements of the modern crinoid Neocrinus blakei.

Sign in / Sign up

Export Citation Format

Share Document