scholarly journals Pengembangan perangkat pembelajaran teknik digital berbasis project based learning di jurusan pendidikan teknik elektro

2017 ◽  
Vol 7 (1) ◽  
pp. 101
Author(s):  
Mohammad Fatkhurrokhman ◽  
Endi Permata ◽  
Ratna Ekawati ◽  
Setria Utama Rizal
Keyword(s):  
Project Based Learning ◽  
Average Score ◽  
Learning Approach ◽  
Design Development ◽  
Development Procedure ◽  
Analysis Design ◽  
Learning Research ◽  
Addie Model ◽  
Digital Engineering

Penelitian pengembangan ini bertujuan untuk mendeskripsikan kualitas perangkat pembelajaran berupa Rencana Pelaksanaan Pembelajaran (RPP) dan Modul Praktik (Lab Sheet) pada mata kuliah Teknik Digital menggunakan pendekatan Project Based Learning. Kualitas produk pengembangan dinilai berdasarkan: (1) aspek kevalidan, (2) aspek kepraktisan, dan (3) aspek keefektifan mahasiswa. Prosedur pengembangan perangkat pembelajaran mengacu pada model pengembangan ADDIE (analysis, design, development, implementation, dan evaluation). Kualitas kevalidan perangkat pembelajaran memenuhi kriteria valid ditunjukkan oleh skor rata-rata RPP masuk dalam kategori sangat baik, dan skor rata-rata Lab Sheet yang dikategorikan baik. Kualitas kepraktisan perangkat pembelajaran memenuhi kriteria praktis ditunjukkan oleh skor rata-rata respon mahasiswa masuk dalam kategori sangat baik, skor rata-rata respon dosen masuk dalam kategori baik, dan persentase hasil observasi pembelajaan masuk dalam kategori sangat baik. Kualitas keefektifan perangkat pembelajaran ditinjau dari kemampuan mahasiswa memenuhi kriteria efektif ditunjukkan oleh persentase ketuntasan siswa yaitu 93,10% yang berarti sangat baik dan skor rata-rata kemampuan mahasiswa yaitu 82,68 yang berarti baik.Kata kunci: perangkat pembelajaran, project based learning, penelitian pengembangan (ADDIE model) THE TEACHING DEVICES DEVELOPMENT OF DIGITAL ENGINEERING USING PROJECT BASED LEARNING IN DEPARTMENT OF ELECTRICAL ENGINEERING EDUCATIONAbstractThis development study was aimed to describe the quality of the learning device in the form of Learning Implementation Plan (RPP) and Practice Module (Lab Sheet) on  Digital Engineering course using Project Based Learning approach. Quality of product development was assessed by considering the aspects of: 1) validity, 2) practicality, and 3) the effectiveness of the student. The development procedure refers to the development model of ADDIE (Analysis, Design, Development, Implementation, and Evaluation). The quality of the learning device validity fulfills the criteria of being ‘valid’ indicated by the average score of RPP which is categorized as very good, and the average score of Lab Sheet which is categorized as good. The quality of learning device practicality fulfills the criteria of being ‘practical’ indicated by the average score of students’ response which is categorized as very good, the average score of lecturers’ response which is categorized as good, and the percentage of learning observation result which is categorized as very good. The quality of the effectiveness of the learning device observed in terms of students’ ability effectively meets the criteria of being ‘effective’ indicated by the percentage of students’ completeness (93.10%) which means very good and the average score of students’ ability (82.68), which means good.Keywords: learning of equipment, project based learning, research of development (ADDIE-Model)

scholarly journals Pengembangan Media Boneka Jari Terhadap Keterampilan Berbicara Siswa Kelas IV SDN Saga VI Kabupaten Tangerang

2021 ◽  
Vol 5 (1) ◽  
pp. 1
Author(s):  
Yolanda Nur Anjeli ◽  
Nur Latifah
Keyword(s):  
Research And Development ◽  
Student Response ◽  
Average Score ◽  
Quality Level ◽  
Design Development ◽  
Quality Aspects ◽  
Fourth Grade Students ◽  
Analysis Design ◽  
Addie Model

This research and development aims to determine the steps to produce finger puppet media on the speaking skills of fourth grade students of SD Negeri Tangerang Regency and to determine the quality of finger puppet media based on validity and quality aspects in terms of the assessment of media expert validators, material experts, practical experts. and student response questionnaires. The development model used in this study uses the ADDIE model which consists of 5 stages, namely analysis, design, development, implementation, and evaluation. The results of this research and development show the level of validity of media experts and material experts with very good criteria and an average score of 4,3.The quality level of the expert practitioners' assessment and student response questionnaires with very good criteria and an average score of 4,9

scholarly journals THE DEVELOPMENT OF E-MODULE ON SUBJECT OF STATISTICS IN STUDY PROGRAM CIVIL ENGINEERING EDUCATION, UNIVERSITAS NEGERI JAKARTA

2020 ◽  
Vol 8 (2) ◽  
pp. 70-74
Author(s):  
M. Agphin Ramadhan ◽  
R. Eka Murtinugraha
Keyword(s):  
Engineering Education ◽  
Average Score ◽  
State University ◽  
Design Development ◽  
Study Program ◽  
The Media ◽  
Analysis Design ◽  
Addie Model ◽  
Module Development ◽  
Building Engineering

The purpose of this research is to develop an e-module for the Statistics subject in the Building Engineering Education study program, Jakarta State University. E-module development using Adobe InDesign software. This research is included in development research (R&D) using the ADDIE model (Analysis, Design, Development, Implementation, dan Evaluation). Two experts, who are material experts and media experts, validate the product. The product is an e-module which consists of 6 modules. Based on the validation, the average score of the material expert's assessment of modules 1 - 6 was 84% in the very feasible category. The average score of the media expert's assessment of modules 1 - 6 is 88.67% in the very feasible category. Based on the results of the validation, the Statistics E-Module is very feasible to use.

scholarly journals The Development of Concept Map-Based Biology Module on Animalia Invertebrate Subject Matter for 11th Grade Students

2019 ◽  
Vol 2 ◽  
pp. 309-312
Author(s):  
Khilma Novia Amalina ◽  
Dian Savitri ◽  
Annisa Safitri
Keyword(s):  
High School ◽  
Subject Matter ◽  
Concept Map ◽  
Teaching Material ◽  
Design Development ◽  
Biology Teacher ◽  
Analysis Design ◽  
Addie Model ◽  
11Th Grade

The purpose of this research is to produce Concept Map-Based Biology Module and to know the quality of this module as a teaching material for 11th Grade Students. This research developed by Analysis, Design, Development, Implementation, and Evaluation (ADDIE) model. Instrument that used is checklist Questionaire. The result of Concept Map-Based Biology Module quality by a media expert, a material expert, five peer reviewer, a biology teacher is very good with presentation 86,56 %. The quality of this module is rated by fifteen 11th Grade Students of IT Abu Bakar High School too and the result is very good with presentation 83,18 %. So, Concept MapBased Biology Module on animalia invertebrate subject matter has very good quality overall and fit as a teaching material 11th Grade Students.

scholarly journals Pengembangan Bahan Ajar Berbasis Addie Model

2019 ◽  
Vol 3 (1) ◽  
pp. 35 ◽  
Author(s):  
Rahmat Arofah Hari Cahyadi
Keyword(s):  
System Design ◽  
Learning Process ◽  
Instructional Material ◽  
Linear Process ◽  
Learning System ◽  
Development Model ◽  
Design Development ◽  
Analysis Design ◽  
Addie Model

Instructional material are an important part in determining the quality of learning. The design of the development of instructional material needs to pay attention to the development model to ensure the quality of instructional material in supporting learning effectiveness, because the development of instuctional material is basically a linear process with the learning process. One of the designs for the development of instructional material that is often used is the ADDIE Model through 5 stages; Analysis, Design, Development, Implementation and Evaluation. The ADDIE model is a learning system design model that shows the basic stages of a learning system that is easy to do. 

scholarly journals Augmented Reality-Based Student Worksheet to Stimulate Students’ Critical Thinking Skills

2021 ◽  
Vol 4 (2) ◽  
pp. 118-133
Author(s):  
Romy Desmara Fendi ◽  
Agus Suyatna ◽  
Abdurrahman Abdurrahman
Keyword(s):  
Critical Thinking ◽  
Thinking Skills ◽  
Critical Thinking Skills ◽  
Average Score ◽  
Design Development ◽  
Thinking Skill ◽  
Critical Thinking Skill ◽  
A Value ◽  
Analysis Design ◽  
Addie Model

Critical thinking skill which is one of the important abilities in the 21st century is important to be trained in learning. The purpose of this research is to develop an AR-based worksheet on dynamic electrical material that is valid, practical, and effective to stimulate students’ critical thinking. The development model used the ADDIE model which consists of analysis, design, development, implementation, and evaluation steps. The product developed was tested for validation, practicality test, and effectiveness test. The results of the validity test obtained a value of 81.80% with a valid category. The results of the practicality test obtained a percentage of 80.85% with good criteria. The results of the effectiveness test showed an N-Gain value of 0.67 with the moderately effective category. From the average pretest and posttest scores, it can be seen that the posttest average score increased by 39.04 which indicates that the use of AR-based worksheets can improve students’ critical thinking. It can be concluded that AR-based worksheets on the concept of dynamic electricity developed are valid, practical, and effective to stimulate students’ critical thinking.

scholarly journals Pengembangan Pedoman E-Modul Berorientasi Student Active Learning Sebagai Pendukung Pembelajaran di Sekolah Dasar

2020 ◽  
Vol 5 (2) ◽  
pp. 292-304
Author(s):  
Kuncahyono ◽  
Dian Fitri Nur Aini
Keyword(s):  
Elementary Schools ◽  
Active Learning ◽  
Student Learning ◽  
Model Development ◽  
Average Score ◽  
Design Development ◽  
Teachers And Students ◽  
Analysis Design ◽  
Addie Model ◽  
Development Application

This study aims to (1) produce a valid e-module guidelines for active student learning in elementary schools that are valid; (2) produce eligibility guidelines for student active learning oriented e-modules in Elementary Schools, and (3) produce practical student learning oriented e-module guidelines. This research uses ADDIE model development research design which consists of 5 levels, namely analysis, design, development, application, and evaluation. The results showed that the results of the validation trial of teaching materials experts and material experts, the average score obtained was 83.95 with valid criteria. The results of user trials (teachers and students) then the average score obtained is 3.5 very well / very practical

scholarly journals Pengembangan Majalah Biologi (Biomagz) Pada Materi Virus Sebagai Alternatif Sumber Belajar Mandiri Siswa Kelas X di MAN 1 Mataram

Biota ◽  
2017 ◽  
Vol 10 (1) ◽  
pp. 92-104
Author(s):  
Husnul Dani Budiatman Dani ◽  
Yahdi Yahdi ◽  
Hadi Kusuma Ningrat
Keyword(s):  
Research And Development ◽  
Learning Outcomes ◽  
Field Trials ◽  
Design Development ◽  
Learning Resource ◽  
Evaluation Result ◽  
Analysis Design ◽  
Addie Model ◽  
Self Learning

This study aims to examine the quality of application of biology magazine as an alternative self-learning resource for 10th year students in MAN 1 Mataram on Virus Material. This is a research and development study using ADDIE model which consist of Analysis, Design, Development and Implementation as well as Evaluation. To assest the quality of Biology Magazine (BioMagz), This was determined by assessment sheets (questionnaire) covering components includes the material/ content feasibility, linguistic and presentation. This Biology Magazine (BioMagz) was applied to 15 students of the 10th year in MAN 1 Mataram. The result showed that there was a significant different in learning outcomes of students whom Biology Magazine (Biomagz) was applied compared to students whom was conventional resoursce applied. This was shown by assessments of content completeness which was excellent with scores 100%, and Media worthiness reached scores 96% which was excellent, while evaluation result of field trials was good with scores 77,5%. This study suggested that Biology Magazine (BioMagz) can be used as an alternative self-learning resource to learn virus material in school.  

scholarly journals PENGEMBANGAN MODUL PRAKTIKUM TEKNIK DIGITAL MODEL ADDIE

2021 ◽  
Vol 8 (1) ◽  
pp. 17
Author(s):  
Amirhud Dalimunthe ◽  
Marwan Affandi ◽  
Eka Dodi Suryanto
Keyword(s):  
Descriptive Analysis ◽  
Project Based Learning ◽  
Digital Model ◽  
Learning Tools ◽  
Design Development ◽  
Average Value ◽  
Analysis Technique ◽  
Qualitative Descriptive ◽  
Addie Model ◽  
Digital Engineering

Abstrak: Masalah yang dihadapi saat melaksanakan praktikum Teknik Digital adalah modul praktikum yang tersedia belum belum sesuai dengan kompetensi lulusan. Masalah lainnya adalah beberapa modul yang membutuhkan perbaikan. Selain itu, panduan praktikum Teknik Digital juga belum lengkap. Solusi untuk permasalahan diatas salah satunya adalah mengembangkan modul praktikum Teknik Digital. Pengembangan modul praktikum Teknik Digital dilakukan dengan menggunakan pendekatan Project Based Learning. Model ADDIE diadaptasi dalam prosedur pengembangan modul praktikum dalam penelitian ini, yang terdiri dari Analysis, Design, Development, Implementation, dan Evaluation. Prosedur penelitian meliputi beberapa tahap yaitu analisis Potensi dan masalah, Pengumpulan data, Desain produk, Validasi desain, Revisi desain, Uji coba, Revisi produk, Uji coba pemakaian, Revisi produk dan Produksi. Hasil penelitian ini diharapkan dapat meningkatkan kompetensi, keterampilan, kreatifitas dan inovasi mahasiswa.  Kata Kunci: Pengembangan, Modul Praktikum, Teknik Digital, Model ADDIE. Abstract:  When attending digital engineering lectures and digital engineering internship courses, students often encounter difficulties because they need to have high logic skills when producing a series of works. Imperfect learning tools is one of the reasons for the above problems. However, some facilities and infrastructure do not support the practical and theoretical learning process. One of them is learning tools, especially practical modules that are not yet available. The purpose of this research is to develop a module and a Digital Engineering practicum jobsheet in accordance with the materials and competencies that students must achieve by utilizing the tools and materials available in the laboratory. The design of this research is R&D. The product of this research will be validated by experts and tested on students after the product is revised. The development procedure adapted from the ADDIE model developed by Dick and Carry. The data analysis technique used a simple qualitative descriptive analysis technique. This research produces a practicum module that contains work procedures and job sheets. The results of the assessment obtained from 2 media experts were 89,4% in the category of easy to understand, useful, interesting and worthy of being used as a practicum guide. The results of the assessment obtained from 2 media experts show that this module is valid and very good with an average value of 90,3%. Students using this module gave an average rating of 89% for ease of learning, attractiveness, design and benefits. Keywords: Development, Practicum Modul, Digital Engineering, ADDIE Model.

scholarly journals Monitoring The Learning Process at SMK Kesatrian Through Kana Buso Application

2020 ◽  
Vol 4 (2) ◽  
pp. 173-183
Author(s):  
Tyas Pratama Puja Kusuma ◽  
Muhamad Awiet Wiedanto Prasetyo
Keyword(s):  
Computer Network ◽  
Network System ◽  
Test Results ◽  
Design Development ◽  
Implementation Evaluation ◽  
Analysis Design ◽  
Planning Development ◽  
Addie Model ◽  
Student Grades

The research aims to produce applications that can analyze the quality of the questions, know the statistics of student grades, and determine the appropriateness of the items to be tested for the subjects of network system administration competence in Computer Network Engineering Class XI Vocational School Kesatrian. Research and development. The development model in this study uses the Analysis-Design-Development-Implementation-Evaluation (ADDIE) Model. With the stages of development, ranging from analysis, planning, development, implementation, and evaluation. The application is developed based on the website. This research resulted in the form of question items named Kana Buso Application, which is suitable as a medium for determining the quality of questions. This application is useful to make it easier for teachers to assess the quality of the items that will be given to students. Based on the test results, it can be concluded that the use of this application can also minimize student cheating in working on exam questions because the questions issued are random.

scholarly journals Pengembangan Media Website Hybrid Learning berbasis Kemampuan Literasi Digital dalam Pembelajaran Fisika

2019 ◽  
Vol 7 (1) ◽  
pp. 130
Author(s):  
Tetra Rahayu ◽  
Tantri Mayasari ◽  
Farida Huriawati
Keyword(s):  
Digital Literacy ◽  
Good Condition ◽  
Hybrid Learning ◽  
Literacy Skills ◽  
Design Development ◽  
Student Responses ◽  
Physics Learning ◽  
Development Procedure ◽  
Analysis Design ◽  
Addie Model

This research was conducted to: (1) develop hybrid learning website media based on digital literacy skills in physics learning, (2) describe the characteristics of products developed, (3) describe students' responses to the developed media. The device developed in the form of hybrid learning website media based on digital literacy skills in physics learning with the development procedure used is the ADDIE model which consists of five stages: analysis, design, development, implementation and evaluation. Media characteristics of hybrid learning websites based on digital literacy capability, namely the website media developed has been based on the concept of hybrid learning and integrated with the dimensions of digital literacy capabilities. Student responses to hybrid learning website media based on digital literacy ability are still in good condition with a percentage of 79.85%.

Sign in / Sign up

Export Citation Format

Share Document